Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

BODY, VALVE

Active

SPE7M1-26-T-302LFederal

Response Deadline09/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE7M1-26-T-302L for the procurement of five valve bodies, identified by NSN/Part Number 4810-01-540-9373. This federal requirement is associated with purchase request 7017978359. The solicitation was posted on August 23, 2026, and the deadline for responses is September 3, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

General Info

DLA solicitation SPE7M1-26-T-302L for five valve bodies due by September 3, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation

PostedAug 23

Solicitation

Response DeadlineSep 3

Submission deadline

Response Deadline

09/03/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

BODY, VALVE NSN/Part Number: 4810-01-540-9373 Purchase Request: 7017978359QTY: 5

Similar Contracts

Same NAICS industry code

TEE, TUBE TO BOSS

Solicitation # SPE7M3-26-T-8571

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE7M3-26-T-8571 for the procurement of one TEE, TUBE TO BOSS. This federal requirement is identified by NSN/Part Number 4730-00-595-2237 and is associated with purchase request 7017673609. The solicitation was posted on August 23, 2026, and the deadline for responses is September 3, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

VALVE, STOP-CHECK

Solicitation # SPE7L1-26-U-0609

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE7L1-26-U-0609 for the procurement of 33 stop-check valves, identified by NSN/Part Number 4820-01-289-9510. This federal requirement is tracked under purchase request 1000240411. The solicitation was posted on August 23, 2026, and the deadline for responses is September 8, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided primary contact email.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

TEE, TUBE TO BOSS

Solicitation # SPE7M0-26-T-054S

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of two units of TEE, TUBE TO BOSS, identified by NSN/Part Number 4730-01-330-1584. The procurement is tracked under purchase request 7017978318 and solicitation number SPE7M0-26-T-054S. This federal contract opportunity is categorized as a solicitation for specialized hardware components required for defense logistics. Interested parties must submit their responses by the established deadline of September 3, 2026, following the posting date of August 23, 2026. The procurement process is managed through the Defense Internet Bid Board System, and interested vendors should refer to the official solicitation link for specific technical requirements and submission instructions. No specific set-aside designations are listed for this federal requirement.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

MANIFOLD ASSEMBLY, HYDR

Solicitation # SPE7M4-26-Q-0978

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of six hydraulic manifold assemblies, identified by NSN/Part Number 1650-01-419-7688. The procurement is tracked under solicitation number SPE7M4-26-Q-0978 and is associated with purchase request 7015891592. This federal contract opportunity is categorized as a solicitation for specialized hardware required for defense operations. The solicitation was posted on August 23, 2026, with a response deadline set for September 4, 2026. Interested parties must submit their responses by the specified cutoff time to be considered. For inquiries regarding the technical or administrative details of this requirement, potential bidders are directed to contact the buyer via the email provided in the official solicitation documentation.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

VALVE, RELIEF, PRESSU

Solicitation # SPE7MC-26-T-220N

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7MC-26-T-220N for the procurement of nine pressure relief valves. These components are identified by NSN/Part Number 4820-01-590-4810 and are associated with purchase request 7016470987. The solicitation was posted on August 23, 2026, and the deadline for responses is September 3, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided primary contact email.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

48--VALVE,SHUTTLE

Solicitation # SPE7L426T6489

DLA Land and Maritime is soliciting quotes for the procurement of shuttle valves under NSN 4820011583162. The requirement consists of two line items totaling 129 units, with 44 units for line 0001 and 85 units for line 0002. All items must be delivered to DLA Distribution San Joaquin within 102 days after the order is placed. This is a source controlled drawing item, and the approved source is identified as 92865 02-740-060. This opportunity is a total small business set-aside under NAICS code 332919. Interested parties must submit their quotes electronically by the deadline of August 31, 2026. The solicitation is available as an RFQ via the provided digital link, and all furnished items must strictly adhere to the requirements of the cited drawing and military specifications.

DLA Land And Maritime

POSTED

DEADLINE

Solicitation # N5005426Q0178

The Mid-Atlantic Regional Maintenance Center is issuing a combined synopsis and solicitation under Simplified Acquisition Procedures for the procurement of shipboard piping and related materials, specifically pipe hangers. This requirement is a total small business set-aside, meaning it is reserved for qualified small business concerns. All items provided under this contract must be brand new, as the government will not accept any refurbished or used parts. The solicitation is conducted electronically via SAM.gov or PIEE, and no paper copies will be provided. Interested vendors must submit their responses by the deadline of August 28, 2026, at 16:45. The procurement is categorized under NAICS code 332919 and follows the guidelines set forth in FAR Part 13 and FAR 12.6. For technical inquiries or further information regarding the Statement of Work, the designated point of contact is Erin Behrns. This solicitation incorporates all relevant provisions and clauses in effect through the specified 2026 regulatory updates.

Mid Atlantic Reg Maintenance Ctr

POSTED

DEADLINE

Solicitation # N0010426QEE88

This solicitation from the Department of Defense, specifically Navsup Weapon Systems Support Mech, is for the procurement of 5-inch elbows under solicitation number N0010426QEE88. The contract is a total small business set-aside and requires strict adherence to technical documentation, including the Individual Repair Part Ordering Data (IRPOD) and specific military standards. Key requirements include the prohibition of mercury, compliance with cybersecurity maturity model certification, and the use of the Wide Area Workflow (WAWF) platform for electronic submission of all reports of test and inspection. The contractor must follow a strict order of precedence for document resolution, with contract amendments taking the highest priority. Technical drawings and specifications are subject to special export controls and are not releasable to foreign nationals. Mandatory deliverables include a procedure package of pre-manufacturing submittals due within 45 days of award and a complete package of vendor certified reports of test and inspection. Pricing for quotations is generally valid for 60 days after the closing date, and the contract specifies FOB-Destination shipping terms.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM126QMH57

This solicitation, issued by DLA Mechanicsburg under emergency acquisition flexibilities, seeks quotes for the manufacture and supply of a globe valve. The procurement follows the Lowest Price Technically Acceptable criteria and requires the item to be physically identified per MIL-STD-130. Vendors must provide quotes with a validity period of at least 90 days and must identify the Original Equipment Manufacturer and CAGE code if they are not the manufacturer. Authorized distributors must provide proof of authorization on company letterhead to be considered for the award. Key administrative requirements include the mandatory use of the PIEE-WAWF system for electronic submission of invoices and receiving reports. The contract specifies that inspection of supplies is fixed-price, with source inspection applicable per DLA Procurement Note E06. Packaging must comply with MIL-STD 2073. Any changes to production facilities require written approval from the Contracting Officer and a price reduction of 250 dollars to cover administrative costs. All contractual documents are considered issued upon transmission via mail, facsimile, or electronic commerce methods.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Purchase and Delivery of Culvert Supply for Chattooga River Ranger District

Solicitation # 12444026Q0173

Solicitation number 12444026Q0173 is a request for quotations for the purchase and delivery of culvert supplies to support the Chattooga River Ranger District. This acquisition is managed by the Department of Agriculture under the Csa East 2 Usda-Fs office, with the place of performance located in Lakemont, Georgia. This opportunity is a total set-aside for small business concerns falling under NAICS code 332919, with a size standard of 750. Interested responsible sources must submit their quotations by August 21, 2026, at 5:00pm ET, as late submissions will not be accepted.

Csa East 2 Usda-Fs

POSTED

DEADLINE

in about 5 hours

STEM,FLUID VALVE

Solicitation # N0010426QND04

This contract pertains to the supply of a specialized stem and disk assembly for a 1 1/2 inch globe throttle valve, designated as special emphasis Level I material due to its critical role in shipboard systems where failure could result in catastrophic consequences including loss of life or the vessel. The item must strictly conform to NAVSHIPS drawing 803-2177525, with the stem composed of ASTM-A182 Grade F6a or SAE AMS-QQ-S-763 Class 410 Condition T material, and must satisfy rigorous mechanical and chemical certification requirements. All materials must be traceable from raw stock through every manufacturing stage to the final component, with unique heat-lot or traceability markings permanently applied and verified against test reports. Certification documentation must confirm compliance with specified standards including ASTM-E18, ASTM-E140, MIL-STD-2035, and ISO-9001, and must be submitted in electronic format via WAWF with explicit identification to the contract number, NSN, and government receipt points. The contract mandates a stringent quality assurance regimen requiring the contractor to maintain an ISO-9001 based quality system, with calibration procedures aligned to ISO-10012 or ANSI-Z540.3 and ISO/IEC 17025, subject to government audit at source. All welding, brazing, and machining operations must adhere to specified Navy procedures including S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, with welding procedures and qualification data requiring prior Navy approval. Non-destructive testing, including dye penetrant inspection and visual inspection of hardfaced surfaces, is required, and chemical and mechanical properties must be verified per heat treat batch with 100% inspection of all certification data. Final acceptance is contingent upon zero-defect lot sampling, with all traceability markings legible and intact. Electronic signatures are permitted on certifications, provided they are individually controlled and unalterable. Delivery is subject to government inspection prior to shipment, with no material allowed to proceed without WAWF certification acceptance from Portsmouth Naval Shipyard. The contract is issued under Emergency Acquisition Flexibilities, requires bilateral acceptance, and mandates full compliance with security and small business set-aside provisions.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNC90

This contract pertains to the procurement of a 1/2 inch socket weld in-line stop valve with backseat, per NAVSHIPS drawing 803-2177525, for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the vessel. The material is designated as SPECIAL EMPHASIS (Level I) and is subject to stringent traceability, quality assurance, and inspection controls. All components must meet exacting material specifications including ASTM-A105, ASTM-A182, ASTM-A193, ASTM-A194, and MIL-S-24093, with mandatory certification of chemical composition, mechanical properties, and heat treatment for each heat lot. The valve must undergo comprehensive non-destructive and pressure testing, including liquid penetrant or magnetic particle inspection on studs and nuts, dye penetrant inspection of hardfacing, and full assembly pressure testing with strict tolerances. First Article Testing is required on one unit, and contractor certification must include traceable, unqualified statements of compliance verified by electronic signatures meeting strict authentication protocols. Every part requires permanent, legible traceability marking conforming to MIL-STD-792, with unique lot identification preserved throughout all manufacturing and subcontracted operations. The contract mandates strict adherence to a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or an approved alternative under MIL-I-45208 and MIL-STD-45662, with full government inspection authority at source. All welding and brazing must be performed per S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with procedures and qualification data submitted for prior approval. Subcontractors are bound by the same requirements and must be pre-qualified by the prime contractor. All certifications, including those for hydrogen embrittlement relief, filler metal, and hardfacing, must be complete, signed, and traceable to individual components. Material must be 100% inspected for traceability, conformity, and documentation accuracy, with zero defect acceptance criteria for lot acceptance. The valve must be marked with the prescribed CID number, and no mercury or mercury-containing compounds may be present. The contract is issued under Emergency Acquisition Flexibilities, is DO certified under DPAS for national defense use, and

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

HOSE ASSEMBLY SET, N

Solicitation # SPE7M2-26-T-6444

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of a single Hose Assembly Set, N, identified by NSN/Part Number 4720-01-718-8207. The contract is categorized as a federal solicitation under solicitation number SPE7M2-26-T-6444. The procurement process is scheduled with a posting date of August 23, 2026, and requires all responses to be submitted by the deadline of September 3, 2026. Interested parties can access further details and manage their response through the official DIBBS procurement portal.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

COOLING COIL, AIR, DU

Solicitation # SPE8E8-26-T-5313

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE8E8-26-T-5313 for the procurement of one air cooling coil. This federal requirement is identified by NSN/Part Number 4130-01-705-0388 and is associated with purchase request 7017982101. The solicitation was officially posted on August 23, 2026, and requires a response by the deadline of September 3, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

Refrigeration Equipment and Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

CABLE ASSEMBLY, FIBE

Solicitation # SPE7M1-26-T-303P

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of a single fiber cable assembly identified by NSN/Part Number 6020-01-618-8110. The procurement is tracked under purchase request 7017924441 and solicitation number SPE7M1-26-T-303P. This federal contract opportunity is categorized as a solicitation for specialized hardware required for defense logistics operations. The solicitation was posted on August 23, 2026, with a formal response deadline set for September 3, 2026. Interested parties must submit their responses through the designated procurement portal before the specified cutoff time. No specific set-aside designations or NAICS codes were provided in the initial documentation, indicating a standard federal procurement process for this technical component.

Fiber Optic Cable Manufacturing

POSTED

about 23 hours ago

DEADLINE

PACKING MATERIAL

Solicitation # SPE7L1-26-U-0605

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE7L1-26-U-0605 for the procurement of packing material. This federal requirement is for five units of part number 5330-01-104-6144, associated with purchase request 1000240404. The solicitation was posted on August 23, 2026, and the deadline for responses is September 8, 2026. Interested parties should direct inquiries to the buyer via the Dibbs BSM portal or the provided email contact.

Packing and Crating

POSTED

about 23 hours ago

DEADLINE

SHOCK ABSORBER, DIRE

Solicitation # SPE7L1-26-T-01R8

This solicitation issued by the Defense Logistics Agency under the Department of Defense concerns the procurement of 36 units of a shock absorber, identified by NSN/Part Number 2510-01-627-2031. The procurement is tracked under purchase request 7017978242 and solicitation number SPE7L1-26-T-01R8. This federal requirement is categorized as a solicitation for direct hardware acquisition to support defense logistics needs. The solicitation was posted on August 23, 2026, with a formal response deadline established for September 3, 2026. Interested parties must submit their responses through the designated procurement portal before the cutoff time to be considered for the contract award. No specific set-aside designations or NAICS codes were provided in the initial documentation, indicating a standard federal solicitation process.

Other Motor Vehicle Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

DISPLAY CASE, MECHAN

Solicitation # SPE3SE-26-T-1179

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of a single mechanical display case identified by NSN 4110-01-608-1114. The procurement is categorized as a federal solicitation under the identification number SPE3SE-26-T-1179 and is associated with purchase request 7017978122. The solicitation was posted on August 23, 2026, with a strict response deadline set for August 27, 2026. Interested parties must submit their responses through the designated procurement portal to be considered for this requirement. There are no specific set-aside designations or NAICS codes listed in the current contract data.

POSTED

about 23 hours ago

DEADLINE

SUPPORT, PELVIC

Solicitation # SPE2DS-26-T-361Y

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of five pelvic support units identified by NSN 6515-01-559-5855. The procurement is categorized under solicitation number SPE2DS-26-T-361Y and is managed as a federal contract opportunity. The solicitation was posted on August 23, 2026, with a designated response deadline of August 31, 2026. Interested parties must submit their responses through the official DLA procurement portal to be considered for the fulfillment of this requirement.

POSTED

about 23 hours ago

DEADLINE

CLAMP, HEMORRHAGE CO

Solicitation # SPE2DS-26-T-364E

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of six hemorrhage control clamps. The requirement is identified by NSN/Part Number 6515-01-629-7044 and is tracked under solicitation number SPE2DS-26-T-364E. This federal procurement is categorized as a solicitation for medical supplies intended for military or defense use. The solicitation was posted on August 23, 2026, with a response deadline set for August 31, 2026. Interested parties must submit their responses through the official DIBBS platform. There are no specific set-aside designations or NAICS codes listed in the current documentation, indicating a standard federal procurement process for these specialized medical devices.

Surgical Appliance and Supplies Manufacturing

POSTED

about 23 hours ago

DEADLINE

PIN, GROOVED, HEADED

Solicitation # SPE4A6-26-T-21NR

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of four grooved headed pins identified by NSN 5315-01-702-4427. The procurement is managed under solicitation number SPE4A6-26-T-21NR and is categorized as a federal solicitation. The bidding process is scheduled to begin with a posting date of August 23, 2026, and requires all responses to be submitted by the deadline of August 31, 2026. Interested parties can access further details and manage their submissions through the official DIBBS procurement portal.

Fastener, Button, Needle, and Pin Manufacturing

POSTED

about 23 hours ago

DEADLINE

HOSE ASSEMBLY, LOW PRES

Solicitation # SPE7M4-26-T-362P

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of six low pressure hose assemblies. The requirement is identified by NSN/Part Number 4720-01-022-1504 and is managed under solicitation number SPE7M4-26-T-362P. This federal procurement is categorized as a solicitation for specialized hardware intended for defense logistics support. Interested parties must submit their responses by the established deadline of September 3, 2026. The solicitation was officially posted on August 23, 2026, and provides a specific framework for vendors to bid on the required quantity of assemblies. Detailed information regarding the submission process and technical requirements can be accessed through the official DIBBS procurement portal.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 23 hours ago

DEADLINE

PLASTIC SHEET, PRESSURE

Solicitation # SPE8E5-26-T-4052

This solicitation issued by the Defense Logistics Agency under the Department of Defense concerns the procurement of a single unit of pressure plastic sheet, identified by NSN 9330-01-433-4582. The procurement is managed under solicitation number SPE8E5-26-T-4052 and is categorized as a federal solicitation. Interested parties must adhere to the established timeline, as the solicitation was posted on August 23, 2026, with a formal response deadline set for September 3, 2026. The contract is being handled through the Defense Logistics Agency to fulfill specific departmental requirements for specialized plastic sheeting.

Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-21LC

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of 40 units of SETSCREW, identified by NSN/Part Number 5305-01-650-2872. The procurement is managed under solicitation number SPE4A6-26-T-21LC and is categorized as a federal solicitation. The request was posted on August 23, 2026, with a response deadline set for August 28, 2026. Interested parties can access further details and submit responses through the official DIBBS procurement portal. This contract is part of a federal acquisition effort to secure specific hardware components for defense logistics requirements.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE