Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Bolt Assy, Turbine T

Awarded

SPRTA1-25-Q-0369Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled "Bolt Assy, Turbine T" is issued under solicitation number SPRTA1-25-Q-0369 by the Department of Defense, specifically through the Oklahoma City DLA Aviation office located at Tinker AFB, Oklahoma. The contract was posted on September 23, 2025, and falls under the NAICS code 336412, which pertains to aircraft engine and engine parts manufacturing. The primary point of contact for this contract is Jayson Skalla, who can be reached via email at [email hidden] or by phone at [phone hidden], with Keith Russ serving as a secondary contact. The contract details, including scope, size, and specific performance requirements, are not explicitly provided, but it is associated with the procurement of turbine bolt assemblies, likely involving manufacturing or supply chain services for military aviation components. The contract is managed by the Office of Oklahoma DLA Aviation within the Department of Defense, emphasizing its focus on supporting military aircraft operations and maintenance.

General Info

Department of Defense awarded $225,000 contract to Pacific Sky for turbine bolt assembly, active until 2026.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

Contract Value

$225,000

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

OK, USA

Set-Aside

NONE

Awardee

PACIFIC SKY SUPPLY, INC.

Award Issued Date

09/23/2025, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedSep 23

Award Notice

AwardedSep 23

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Contacts2 people available

OfficeTINKER AFB, OK, 73145-3070, USA

Organization / AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

Office AddressTINKER AFB, OK, 73145-3070, USA

Contacts

Jayson Skalla

contact@example.gov

+1 (555) 000-0000

Keith Russ

contact@example.gov

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=ee935d5c580246138759080c7ecabfa8

Similar Contracts

Same NAICS industry code

Manufacturing of Seal Retaining Plates (P/N 3014893)This subcontract involves the manufacturing of four precision-machined seal retaining plates for aircraft engine projects under the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for fabricating the plates according to Pratt & Whitney Canada Corp P/N 3014893 specifications, utilizing specialized precision machining equipment suitable for critical application items. Strict quality assurance and inspection protocols must be followed, adhering to MIL-STD-1916, ASQ H1331, and MIL-STD-105/ASQ Z1.4 standards. Additionally, the provider must ensure full compliance with DFARS 252.225-7001 regulations. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Oil Pressure Cover SupplyThis subcontract through the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division involves the manufacture or sourcing of six oil pressure covers under NSN 2840-01-029-5266. The selected provider will supply these components to prime contractors, ensuring all units meet strict quality standards. Compliance requires the use of MIL-STD-1916 for quality inspections and MIL-STD-105/ASQ Z1.4 for determining sample lot sizes, with a mandate for zero non-conformance acceptance. Eligible bidders must possess a valid UEI and CAGE code to participate in this procurement effort.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Precision Sheet Metal Fabrication - Engine Shroud AssemblyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the precision fabrication of Engine Shroud Assemblies for prime contractors. The scope of work requires specialized sheet metal fabrication adhering to MA-122, surface texture finishing per ASME B46.1, and marking in accordance with MIL-STD-130. To successfully execute the contract, the provider must utilize precision forming equipment and surface texture verification tools to deliver completed assemblies and First Article units. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412. Strict compliance standards are mandatory, including the maintenance of CMMC Level 2 certification and adherence to Northrop Grumman Licensing Agreements. Interested parties must respond by November 3, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

First Article Testing and Certification for Aircraft Connector AssembliesThis HUBZone set-aside subcontract, issued by the DLA Weapons Support Fluid Handling Division, involves First Article Testing and Certification for aircraft connector assemblies, specifically for NSN 1710-00-831-6821. The selected contractor will support prime contractors by executing FAT protocols, performing detailed measurements and inspections, and generating formal validation reports to verify manufacturing processes. Performance of these services requires the use of certified metrology equipment and CSI-standard testing capabilities. The project is based in New Cumberland, Pennsylvania, and requires the delivery of one tested unit along with a comprehensive FAT report. Interested parties must respond by November 9, 2026, under NAICS code 336412.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Aircraft Compressor Blade Set FabricationThis subcontract involves the fabrication of 10 complete aircraft compressor blade sets under NSN 2840-00-176-3758 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. The project requires the use of precision CNC machining and aerospace-grade alloys to manufacture blades that adhere strictly to technical drawings and quality standards for Critical Safety Items. To be eligible, the manufacturer must hold both SAE AS9100 quality management system certification and specific CSI certification. The contract falls under NAICS code 336412, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Manufacture and Supply of Aircraft Gas Turbine Engine Exhaust Duct

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Supply of SARC (NSN 1440016579543)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Supply of Valve Gate Shafts (P/N 111390)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE4A5-27-T-2020

Solicitation SPE4A5-27-T-2020 is issued by the DLA Weapons Support ASC Supplier OEM Division for the procurement of four special bands, identified by NSN 2840-01-036-1322 and part number 3023698 from Pratt & Whitney Canada Corp. The required delivery date is October 26, 2026, with a delivery lead time of 20 days after receipt of order. The items are to be shipped FOB Origin to a consignee located in Guvercinlik, Turkey, utilizing A.J. Worldwide Services as the freight forwarder. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program, DFARS cybersecurity reporting standards, and hazardous material labeling per 29 CFR 1910.1200. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

RETAINER, SPRING, VALVE

Solicitation # SPE4A1-27-T-0221

Solicitation SPE4A1-27-T-0221 is a fixed-price procurement issued by the DLA Weapons Support Aviation Supply Chain for four units of Valve Spring Retainers, identified by NSN 2995011668338 and Meggitt North Hollywood Inc part number 229651. The contract requires delivery to the DLA Distribution Depot Oklahoma at Tinker AFB, with a need ship date of March 8, 2027, and an original required delivery date of March 19, 2027. Delivery is FOB Origin, and both inspection and acceptance are to be conducted at the origin. The procurement is subject to rigorous quality and technical standards, including CMMC Level 2 self-assessment and various DLA master list requirements such as configuration change management and tailored higher-level quality requirements. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for MIL-STD-105/ASQ Z1.4. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE4A5-27-T-2023

Solicitation SPE4A5-27-T-2023 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of four special bands. The items are identified by NSN 2840010295271 and Pratt & Whitney Canada Corp part number 3023697. The contract specifies delivery within 20 days after receipt of order, with terms set as FOB Origin. Inspection and acceptance will also occur at the origin. The shipping destination is located in Guvercinlik, Turkey, with logistics coordinated through A.J. Worldwide Services. The procurement is subject to rigorous quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance under MIL-STD-105/ASQ Z1.4. Item Unique Identification is not required. The solicitation incorporates various FAR and DFARS clauses, including requirements for the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity assessments. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the use of additive manufacturing is prohibited unless specifically authorized. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

BLADE SET, COMPRESSO

Solicitation # SPE4A5-27-T-2040

Solicitation SPE4A5-27-T-2040 is a procurement request from the DLA Weapons Support ASC Supplier Oper OEM Division for 10 aircraft compressor blade sets, identified by NSN 2840-00-176-3758. This is an Air Force designated Critical Safety Item (CSI) and a Foreign Military Sales (FMS) requirement for the Royal Jordanian Air Force. The procurement is governed by NAICS code 336412 and requires adherence to specific technical drawings and quality assurance plans, including SAE AS9100 higher-level quality requirements. Delivery is specified as 20 days after receipt of order, with inspection occurring at the origin and acceptance at the destination. Offerors must comply with strict domestic material restrictions, including the Berry Amendment and the Buy American Act, and provide disclosure for any non-domestic materials. The contract mandates the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and requires registration via the Account Management and Provisioning System (AMPS) for Vendor Shipment Module (VSM) access. Key regulatory compliance includes DFARS 252.204-7012 for safeguarding covered defense information and prohibitions against covered telecommunications equipment. Packaging and marking must strictly follow MIL-STD-129 and MIL-STD-2073-1E standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

CEMS Event Reporting and Data ManagementThe CEMS Event Reporting and Data Management subcontract involves providing specialized data entry and reporting services for Department of the Air Force F110 engine projects. The selected contractor will be responsible for reporting component status into the Comprehensive Engine Management System in strict accordance with USAF Technical Order 00-25-254-1 to support prime contractors. Managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City, this effort requires personnel to obtain a favorable National Agency Check with Inquiries to ensure authorized access to DoD systems. The primary deliverable for this engagement is the accurate completion of CEMS Event Reporting entries.

Administrative Management and General Management Consulting Services

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Aviation Component Inspection and Test ServicesThe Aviation Component Inspection and Test Services subcontract involves performing critical inspections and testing for prime contractors supporting Department of the Air Force F110 engine projects. The primary objective is to certify that temperature sensors adhere to Critical Safety Item standards through rigorous testing conducted according to engineering drawings. The selected provider must utilize precision calibration equipment to generate detailed written documentation and material certifications. To qualify for this engagement, contractors must hold either AS9100 or ISO 9001-2015 certification. The scope of work culminates in the delivery of certified inspection and test reports to the Department of Defense via the Ok DLA Aviation office in Oklahoma City. Responses for this opportunity are due by December 2, 2026.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

in about 1 month

F110 Engine Temperature Sensor ProductionThis subcontract involves the production and supply of 32 finished temperature sensors, identified by NSN 2915-01-485-7506PR, for prime contractors supporting Department of the Air Force F110 engine projects. The selected provider must manufacture the sensors in strict accordance with Engineering Drawing, ECP, and ECO specifications, while ensuring full supply chain traceability and the implementation of IUID marking. To qualify, the contractor must hold AS9100 or ISO 9001-2015 certification and adhere to rigorous Critical Safety Item standards. Final deliverables must include comprehensive inspection and test records to verify compliance. The opportunity is managed through the Department of Defense via DLA Aviation at Oklahoma City, with a response deadline of December 2, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Aerospace NDT Inspection and Quality ValidationThe Aerospace NDT Inspection and Quality Validation subcontract involves providing specialized non-destructive testing services for prime contractors supporting Department of the Air Force F110 engine projects. The scope of work includes performing ultrasonic testing, X-ray radiographic testing, magnetic particle inspection, and dye penetrant inspection utilizing ultrasonic transducers and X-ray machinery. The selected provider is responsible for delivering detailed inspection reports and certifications of conformance to ensure all components meet strict quality standards. Managed under the Department of Defense through the Ok DLA Aviation At Oklahoma City, this requirement mandates that the contractor hold NAS410 and AS9100 certifications. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 5, 2026.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

Aerospace Surface Finishing and CoatingThis subcontract for Aerospace Surface Finishing and Coating involves providing specialized coatings, plating, and surface treatments for prime contractors supporting Department of the Air Force F110 engine projects. The scope of work includes the application of thermal sprays, anodizing, and aerospace coatings utilizing vacuum chambers and plating tanks to enhance wear resistance and prevent corrosion on rotor components. Managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, the contract requires the provider to maintain Nadcap accreditation to ensure industry quality standards. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, falling under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 10 hours ago

DEADLINE

Precision CNC Machining of Fan RotorThis subcontract involves the precision CNC machining of fan rotors for prime contractors supporting Department of the Air Force F110 engine projects. The scope of work includes turning, milling, boring, and drilling based on original design drawings, utilizing high-precision 5-axis CNC mills and large-scale lathes to deliver finished rotor components. Managed by the Department of Defense through the DLA Aviation office in Oklahoma City, the project falls under NAICS code 332710. To ensure strict quality and safety standards for aerospace components, the performing contractor must maintain both AS9100 and ISO 9001 certifications.

POSTED

about 10 hours ago

DEADLINE

Aerospace Grade Raw Material Supply (Fan Rotor Alloys)This subcontract, managed by the Department of Defense through DLA Aviation at Oklahoma City, involves the supply of raw aerospace-grade alloys for Department of the Air Force F110 engine projects. The scope of work includes the sourcing, smelting, and forging of titanium or nickel-based superalloy raw billets and ingots to meet strict military and aerospace material specifications. To ensure quality and regulatory adherence, the provider must maintain AS9100 certification and comply with DFARS specialty metals requirements. All deliveries must be accompanied by comprehensive material certifications and Mill Test Reports. The opportunity was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Aerospace Component Packaging and ShippingThis subcontract for Aerospace Component Packaging and Shipping supports Department of the Air Force F110 engine projects through the Ok DLA Aviation At Oklahoma City. The scope of work involves providing specialized packaging and shipping services for prime contractors, specifically focusing on the secure transport of rotors to Tinker AFB. Key technical requirements include the use of vacuum sealing equipment for moisture barrier packaging and the creation of custom crating for oversized precision parts. All operations must maintain strict compliance with MIL-STD-2073 standards to ensure the integrity of aerospace components. The opportunity is categorized under NAICS code 484220 and was posted on October 28, 2026, with a response deadline of November 5, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 10 hours ago

DEADLINE

CSI-Compliant Bag/Tag Marking and Packaging ServicesThis subcontract for the Department of Defense, specifically Ok DLA Aviation At Oklahoma City, involves providing specialized IUID marking and military-grade packaging services for prime contractors. The scope of work requires the execution of Bag/Tag marking in strict accordance with MIL-STD-130, with a critical requirement that no direct marking be applied to Critical Safety Items. All shipments must be packaged and marked following MIL-STD-2073-1 and MIL-STD-129 standards using IUID-compliant labeling systems. The project deliverables consist of five IUID-marked and packaged units prepared for FOB Origin shipment. This opportunity falls under NAICS code 561910 and was posted on October 28, 2026, with a response deadline of November 27, 2026.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Manufacture of Turbine Nozzle Supports (Critical Safety Item)This subcontract involves the manufacture of five turbine nozzle supports designated as Critical Safety Items for prime contractors supporting DLA Aviation. The components must be fabricated to match MPNs 07482 1386M15G20 or 51992 1386M15G20, utilizing either aerospace casting or precision CNC machining in strict accordance with technical documents F3YTBK5157A006 and FD20302402216. To qualify, the manufacturer must hold ISO 9001-2015 certification and demonstrate full compliance with DFARS 252.204-7012 and NIST SP 800-171 security standards. The project falls under NAICS code 336413 and is managed through the Department of Defense for the DLA Aviation office in Oklahoma City.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

SUPPORT,TURBINE NOZ

Solicitation # SPRTA127Q0033

Solicitation SPRTA127Q0033 is a firm fixed price requirement issued by the Department of Defense, specifically the DLA Aviation office at Tinker AFB, for the procurement of five units of Support, Turbine Noz (NSN 2840-01-347-2206 PR). The items must conform to manufacturer part numbers 07482 1386M15G20 or 51992 1386M15G20 and are designated as Critical Safety Items. Due to this designation, direct marking is prohibited, and the only authorized method for Item Unique Identification (IUID) is Bag/Tag in accordance with MIL-STD-130. The procurement is associated with Foreign Military Sales Case GR-D-SBD and requires compliance with ISO 9001-2015 quality standards. The contract emphasizes strict packaging and marking standards, requiring adherence to MIL-STD-2073-1 for packaging and MIL-STD-129 for shipping and storage markings. Delivery is set as FOB Origin. Evaluation of offers will be primarily based on price and cost, with the contracting officer also considering SPRS risk assessments regarding item, price, and supplier performance. Offerors must maintain active SAM registration, including a valid UEI and CAGE code, and comply with cybersecurity requirements under DFARS 252.204-7012 and NIST SP 800-171. Inspection and acceptance will occur at the origin, with all reporting submitted via Wide Area Workflow.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

ROTOR, FAN_End_Item_F110_NSN_2840015807062PR_PN_9547M28G15

Solicitation # FD20302700073

The Department of the Air Force, specifically the 421st Supply Chain Management Squadron at Tinker AFB, is conducting market research via a Sources Sought Synopsis to identify potential sources for the spares procurement of a fan rotor for the F110 platform. The requirement involves the manufacture of part number 9547M28G15 (NSN 2840-01-580-7062PR) under NAICS code 336412. This effort is currently in the research phase to determine the best acquisition strategy and to evaluate if the requirement can be a small business set-aside. Consequently, there is no active solicitation, no available funding at this time, and no contract will be awarded based solely on this market research. Interested sources must be capable of providing all labor, materials, and equipment for the new manufacture of the item, including inspection, testing, and packaging. Because the item is classified as a propulsion critical safety or critical application item, potential sources must obtain Engineering Support Activity approval. This requires the submission of a Company Profile and a Source Approval Request, as well as valid quality certifications such as ISO 9001, AS9100, or NATO AQAP-2070. The government is seeking information from all business types, including large and various small business categories, to determine the competitive landscape for this procurement.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

SPACER,AIRCRAFT EQU

Solicitation # N0038325QT591

Navsup Weapon Systems Support

POSTED

about 1 year ago

CLOSED

about 1 year ago

FD2030-25-02557

Solicitation # FD2030-25-02557

DLA Aviation Oklahoma City

POSTED

about 1 year ago

CLOSED

about 1 month ago

29--VALVE,FUEL SYSTEM

Solicitation # SPE4A725T609Z

POSTED

about 1 year ago

CLOSED

about 1 year ago

Solicitation # FA2823-25-Q-A038

FA2823 Aftc Pzio

POSTED

about 1 year ago

CLOSED

about 1 year ago

STATOR, ENGINE GENER

Solicitation # SPRTA125R0475

Ok DLA Aviation At Oklahoma City

POSTED

about 1 year ago

CLOSED

about 1 year ago

59--GEARBOX ASSEMBLY

Solicitation # SPE4A725T884L

POSTED

about 1 year ago

CLOSED

about 1 year ago

FD2030-26-00210

Solicitation # FD2030-26-00210

DLA Aviation Oklahoma City

POSTED

about 1 year ago

CLOSED

about 1 month ago

J-85 Main Spraybar

Solicitation # SPRTA1-25-C-0115

Ok DLA Aviation At Oklahoma City

POSTED

about 1 year ago

CLOSED

about 1 year ago

VALVE,MODULATING

Solicitation # SPRPA125QEM48

Pa DLA Aviation At Philadelphia

POSTED

about 1 year ago

CLOSED

about 1 year ago

29--PARTS KIT,FUEL HEAT

Solicitation # SPE4A725T887F

POSTED

about 1 year ago

CLOSED

about 1 year ago

53--NRP,GROMMET ASSEMBL

Solicitation # N0038325QS301

Navsup Weapon Systems Support

POSTED

about 1 year ago

CLOSED

29--PARTS KIT,PUMP,OVER

Solicitation # SPE4A725T881C

POSTED

about 1 year ago

CLOSED

about 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS