Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, SHOULDER

Active
SPE4A6-26-T-06HAFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of a shoulder bolt with NSN 5306015918660 and part numbers including C9507-10049, issued under solicitation SPE4A6-26-T-06HA by the Defense Logistics Agency. The item must comply with all applicable technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling. Manufacturing and non-manufacturing suppliers are subject to tailored higher-level quality requirements, and configuration changes require formal engineering change proposals or variance requests. Inspection and acceptance occur at origin, with sampling governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes must meet verification levels VII and AQL 0.1. Packaging must conform to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement. The contract mandates Cybersecurity Maturity Model Certification Level 2 compliance, source approval documentation, and removal of government identification from non-accepted items. A single unit is ordered for delivery within 432 days, FOB origin, with no quantity variance permitted. The item is designated a critical application item and requires first article testing, with one unit allocated for this purpose under FAR clause 52.209-4; pricing must be provided for the test unit, though no award will be made if the test is waived. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with shipping instructions referenced in DLAD Proc Notes C19 and C20.

General Info

Procurement of one critical shoulder bolt under DLA solicitation with strict quality, cybersecurity, and packaging requirements.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-06HA.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Debra Fowler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHOULDER
BOLT,SHOULDER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
SPE4A6-26-T-06HA
SECTION B
SPS TECHNOLOGIES, LLC 56878 P/N 123136-10049
SPS Technologies, LLC DBA 80539 P/N 123136-10049 SPS TECHNOLOGIES, LLC 06725 P/N AIC297-10049R M.S. AEROSPACE INC. 0UCY9 P/N MSA9507-10049 VALLEY-TODECO, INC. 06710 P/N VCG0006-10049
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 81755 C9507 REVISION NR G DTD 09/24/1997 PART PIECE NUMBER: C9507-10049
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016474076 0001 EA 1.000
NSN/MATERIAL:5306015918660
DELIVERY (IN DAYS):0432
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE4A6-26-T-06HA
SECTION B
PR: 7016474076 PRLI: 0001 CONT’D
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:07/20/2026 Original Required Delivery Date:03/18/2027
GOVERNMENT FIRST ARTICLE TEST – THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-4 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000052
DELIVERY (IN DAYS):0090
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE4A6-26-T-06HA NSN/Part Number: 5306-01-591-8660 Quantity: 1 EA Purchase Request: 7016474076QTY: 1 Delivery: 432 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
BOLT, SHEARThis contract pertains to the procurement of 269 shear bolts designated as special high-strength fasteners for use by the Department of Defense aviation community. The items must be manufactured, tested, and inspected in strict compliance with required technical data and referenced specifications, with all Class 3A and 3B threads subject to dimensional conformity inspection per System 22 of Fed-Std-H28/20, excluding self-locking nuts and threads below specified diameters. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the governing revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed prior to return. All items require physical identification and bare item marking as specified. The solicitation, numbered SPE4A6-26-T-05XF, was posted on July 14, 2026, with responses due by July 22, 2026, and delivery is required within 171 days after delivery order issuance to New Cumberland, Pennsylvania, under NAICS code 332722. Primary point of contact is Tyler Greene of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, EYEThis contract involves the procurement of 23 units of BOLT, EYE with NSN 5306-01-524-4880 under solicitation SPE4A6-26-T-06BW, issued by the Department of Defense’s ASC Commodities Division. The item must be delivered FOB origin within 171 days of contract award, with a required delivery date of January 20, 2027, and a need ship date of January 10, 2027. Delivery is to be made to the designated receipt warehouse in Tracy, California, with no tolerance allowed for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization per specified guidelines. Mercury or mercury-containing compounds are strictly prohibited unless exempted for specific applications such as functional batteries, fluorescent lights, or instrument components as defined by NAVSEA, with portable devices requiring shockproof construction and secondary containment. Item marking and identification must adhere to RQ017 standards, with unit of issue as EA and pricing set at $23.00 per unit. Transportation and shipping instructions follow DLAD Proc Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract pertains to the procurement of 1,161 shear bolts, identified by NSN 5306-01-053-9776 and part number NAS6603D8, classified as a critical application item. All supplies must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality requirements, inspection and acceptance protocols at origin, and physical marking specifications per MIL-STD-129. Quality conformance is verified through a Certificate of Quality Compliance and adherence to MIL-STD-1916 or ASQ H1331 sampling plans, with critical attributes requiring verification at level VII or AQL 0.1. Packaging must meet MIL-STD-2073-1E and DLA-specific packaging requirements, with palletization and marking conforming to established codes and formats. The unit of issue is each, with no variance permitted in quantity. Delivery is FOB origin, with inspection and acceptance occurring at destination after a 287-day delivery window. The designated delivery point is the DLA Distribution Depot in Tinker AFB, Oklahoma, with the original required delivery date set for September 12, 2027. All documentation, including the Technical Data Package and required CDRLs, must be reviewed for full compliance, and the item is subject to government quality control processes including removal of government identification from non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEADThe contract pertains to the procurement of six hexagon head cap screws, identified by part number 284591-0001 and NSN 5305-01-479-0793, sourced from Marotta Controls Inc. All supplied hardware must strictly comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on acquisition scale. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking required. The items are to be delivered FOB origin to the designated receiving warehouse in Tracy, California, with a delivery window of 171 days from contract issuance, and no variance in quantity is permitted. Inspection and acceptance occur at the destination point. The contract explicitly prohibits the intentional use of mercury or mercury-containing compounds in any part of the hardware, packaging, preservation, or marking, with limited exceptions for functional uses in specific devices such as batteries, fluorescent lamps, sensors, or weapon systems, provided those items meet additional containment standards per NAVSEA 5100-003D. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed in the sample lot, unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The solicitation number is SPE4A6-26-T-05YY, with a response deadline of July 22, 2026, and the primary point of contact is Monica Greene of the ASC Commodities Division. The original required delivery date was November 4, 2026, but the contract specifies a need ship date of January 10, 2027, aligning with the extended delivery timeframe.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, EXTENDED WASThe contract pertains to the procurement of 347 units of a plain extended hexagon nut with an extended washer, identified by NSN 5310-01-613-7050 and OSHKOSH DEFENSE LLC part number 4010502, under solicitation SPE7LX-26-U-8824. Delivery is required within 58 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence and must be followed, including proper marking and labeling per MIL-STD-129. Packaging and palletization must adhere to RP001 DLA Packaging Requirements for Procurement, with a Unit of Issue of EA and a Quantity per Unit Pack of 001. The contract is classified as DLA DIRECT CONUS and is governed by the DLA master requirements in effect on the solicitation issue date, with any deviations or waivers requiring formal engineering change proposal or variance request. All government identification must be removed from non-accepted supplies, and the item is subject to full compliance with DLA’s technical and quality standards. Purchasing is managed under PR 1000237414 with a unit price listed, totaling an estimated value based on the specified quantity. The solicitation was posted on July 14, 2026, with responses due by July 29, 2026, and is administered by the Department of Defense’s Strategic Acquisition Program Directorate through point of contact Theodore Misiolek.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details