Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Bolt Stud

Active
Z5452State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nashville Electric Service is soliciting bids under solicitation Z5452 for the procurement of 1,550 hot dip galvanized long shank line post stud assemblies. Each assembly must be 3/4x8 long with an 11/16 inch hex head section and a minimum thread length of 4 inches. Required components for each unit include a lock washer, square washer, square nut, and lock nut. Only specific approved manufacturers and part numbers are acceptable, including Line Har, Maclean, Gamma, Lapp Ins, Hubbell, Pwerline, and Hughes; alternate brands will not be accepted. Bids must be submitted through the Bid Center by 2:00 pm local time on November 4, 2026. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. The primary procurement contact for this request is Tiffany Caruthers. Technical compliance with the specified materials and the use of approved part numbers are the primary evaluation factors for the award.

General Info

Nashville Electric Service seeks bids for 1,550 specific galvanized line post stud assemblies.

Agency

Tennessee → Nashville Electric Service

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfb
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / AgencyTennessee → Nashville Electric Service
Office AddressNashville, TN, USA
Contacts
Tiffany CaruthersProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
EA BOLT STUD 3/4X8LONG/LP INSUL LONG SHANKLINE POST STUD ASSEMBLY HOT DIP GALVANIZED, WITH 11/16" HEX HEAD SECTION, 4" MINIMUM THREAD LENGTH. ASSEMBLY SHALLINCLUDE LOCK WASHER, SQUARE WASHER, SQUARE NUT, AND LOCK NUT. LINE HAR LPS-34-700 LINE HAR SWC-400F MACLEAN J25250.1 GAMMA10187A LAPP INS 10187A HUBBELL DF19M4 PWERLINE P25250.8 HUGHES B 2753.2A Stateyour earliest delivery IN CALENDAR DAYS: _ DELIVERY MAY BE CONSIDEREDIN THE AWARDOF THIS BID. _ Alternate brands will not be accepted on this inquiry. To have your product evaluated for future consideration, contact the buyerlisted in this RFB. _ In the eventof a discrepancy between the ordering description and part number, it is the responsibility of the vendor to contact the buyerfor clarification before the published CLOSE DATE. _ Note: This bid must be submitted usingthe Bid Center and must be received by 2:00 pm localtime on the published CLOSE DATE. _

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
SLED
One (1) Year Contract - Nuts and Bolts
Solicitation # 348
The Jefferson Parish Government is soliciting bids for a one-year, as-needed contract to supply various nuts and bolts for the Eastbank Warehouse Department. The scope of work includes the procurement of domestic hex head bolts, T-head bolts, and hex nuts in multiple sizes and grades, including Grade 5, A325, and A449. A critical technical requirement for most items is a baked-on blue Teflon coating that meets the ASTM B117 testing standard for corrosion resistance. Additionally, T-head bolts must comply with ANSI/AWWA C111/A21.11-00 standards, and certain nuts must meet ASTM A194 specifications. Bidders must adhere to strict insurance requirements, including mandatory coverage for Worker's Compensation, Commercial General Liability, and Business Automobile Liability in accordance with Jefferson Parish Resolutions. The apparent low bidder is required to submit compliant insurance certificates within ten calendar days of the bid opening to avoid rejection. The Parish reserves the right to award the contract to the next lowest responsive and responsible bidder if these insurance obligations are not met. Responses to solicitation number 348 are due by November 10, 2026.
Jefferson Parish Government

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
Supply of Hexagon Cap Screws (NSN 5305-01-731-2843)This subcontract involves the supply of Hexagon Cap Screws, specifically NSN 5305-01-731-2843, to support prime contractors for DLA Aviation supply contracts. The items must be sourced according to the DLA Master List of Technical and Quality Requirements, with a strict prohibition on the use of additive manufacturing. All deliverables must be shipped to the Electric Boat Corporation in North Stonington, Connecticut, with packaging and quality control adhering to MIL-STD-129, MIL-STD-2073-1E, and either MIL-STD-1916 or ASQ H1331 standards. To be eligible for this contract, providers must maintain JCP certification and ensure full compliance with ITAR, EAR, and NIST SP 800-171 regulations. The procurement is managed by the Department of Defense under the ASC Commodities Division and falls under NAICS code 332722. Interested parties must meet the response deadline of November 4, 2026.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
Specialized Fasteners and Hardware SupplyThis subcontract involves the procurement of nuts, bolts, screws, and specialized fasteners to support prime contractors delivering installation kits for the DLA Weapons Support Land Supply Chain. All provided hardware must strictly adhere to the grade and material standards specified in the TDP Rev B Gen 2 reference drawings. Due to the critical nature of the components, the supplier is required to maintain quality certification for aerospace and defense grade fasteners to ensure all deliveries are fully certified. Managed by the Department of Defense under NAICS code 332722, the contract was posted on October 30, 2026, with a response deadline of December 1, 2026. Performance for this requirement is centered in the 17070-5002 zip code area. Interested parties can find further details through the DLA Weapons Support Land Supply Chain procurement portal.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturer of Specialized Machine Screws (NSN 5305-01-532-7643)This subcontract opportunity with the Department of Defense ASC Commodities Division involves the precision manufacture of machine screws under NSN 5305-01-532-7643. The selected provider must produce ten screws per unit in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. Deliverables include the physical hardware and a formal Certificate of Quality Compliance, with performance based in New Cumberland. To be eligible, manufacturers must hold SAE AS9003 or ISO 9001 certification and maintain US/Canada JCP certification. Additionally, the contract mandates strict cybersecurity adherence through CMMC Level 2 and NIST SP 800-171 compliance. Interested parties must submit their responses by November 4, 2026.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
BOLT, EYE
Solicitation # SPE4A6-27-T-5815
Solicitation SPE4A6-27-T-5815 is a Request for Quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of four eye bolts (NSN 5306-00-159-5362). Designated as critical application items, the bolts must be manufactured according to basic drawing NR 80064 2584025 Revision J and reference drawing NR OMLM6 2584542 Revision AA. The required delivery date is August 18, 2027, with a need ship date of April 20, 2027, for delivery to DLA Distribution Albany in Georgia. This is not a small business set-aside, though a price evaluation preference is available for SBA-certified HUBZone concerns. The contract mandates strict quality and security compliance, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Technical data is subject to ITAR or EAR export controls, and contractors must meet CMMC Level 2 and DFARS 252.204-7012 cybersecurity standards for safeguarding covered defense information. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Additionally, the government will not evaluate or award offers involving items produced via additive manufacturing. Invoicing and receiving reports must be processed electronically through Wide Area WorkFlow.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-27-T-6305
Solicitation SPE4A6-27-T-6305 is a fixed-price request for quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of 22 self-locking hexagon nuts. The required items are identified by NSN 5310-00-894-4990, with Meggitt Aircraft Braking Systems Corp part number GYN165, for which SPS Technologies is listed as an acceptable source. The procurement falls under NAICS code 332722 and is not a small business set-aside, though a HUBZone price evaluation preference may be applied. Delivery is required within five days after receipt of order to the W6TF Aviation Flight Company at Fort Bragg, North Carolina. The contract mandates strict adherence to DLA packaging requirements RP001 and marking standard MIL-STD-129, with additional hazard labeling required per 29 CFR 1910.1200 for any hazardous materials. Quality assurance involves destination inspection under FAR 52.246-2, utilizing zero-based sampling plans such as MIL-STD-1916 or ASO H1331. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the successful contractor must utilize the Wide Area Workflow (WAWF) system for invoicing and payment. Key regulatory compliance includes the Buy American Act, Berry Amendment, and various DFARS cybersecurity and telecommunications restrictions.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-27-T-6249
Solicitation SPE4A6-27-T-6249 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of self-locking plate nuts (NSN 5310015971830). The requirement is divided into three delivery locations: DLA Distribution Barstow, DLA Distribution Albany, and DLA Distribution New Cumberland, with a total combined quantity of 1,503 units. Delivery is specified as FOB Origin under the First Destination Transportation program, with a general delivery lead time of 220 days and required delivery dates extending through October and November 2027. The items are classified as critical application commercial hardware and must be manufactured in accordance with the current revision of the applicable part standards, specifically referencing MIL-DTL-45913/1B(3) and MIL-DTL-45913E. Quality assurance requires a manufacturer's inspection system complying with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with palletization following DLA requirement RP001. This procurement is not a small business set-aside, although a price evaluation preference is available for HUBZone Small Business Concerns. Offerors must comply with the Buy American Act and Berry Amendment restrictions and represent that they will not provide covered telecommunications equipment. All quotes must be submitted electronically via the DIBBS portal, and successful contractors will be required to use the Wide Area WorkFlow system for invoicing and payment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-27-T-6088
Solicitation SPE4A6-27-T-6088 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 48 socket head cap screws, identified by NSN 5305-01-597-3671. This is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. The procurement is managed under the First Destination Transportation program, with a need ship date of April 20, 2027, and an original required delivery date of July 27, 2027. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and safety standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Mercury or mercury compounds are strictly prohibited in all packaging and preservation. Due to the nature of the technical data, this procurement is subject to ITAR and EAR export controls per DFARS 252.225-7048, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, offerors must comply with the Buy American Act and Berry Amendment restrictions, and provide disclosure for any non-domestic materials used. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the DIBBS system for quote submission. Inspection and acceptance will occur at the destination based on zero-non-conformance sampling plans. The solicitation also incorporates cybersecurity requirements, including DFARS 252.204-7012 and CMMC Level 2 standards, and prohibits the use of covered telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-27-T-6430
Solicitation SPE4A6-27-T-6430 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of close tolerance screws, identified as NSN 5305008284612 and part number NAS1152E4. This is a critical application commercial item. The requirement is for 86 packages, with each package consisting of 50 pieces. Delivery is required by March 21, 2027, with a need ship date of April 6, 2027, shipped FOB Origin to DLA Distribution Warner Robins in Georgia. The contractor must adhere to strict quality and technical standards, including TDP Rev A Gen 1 and the current revision of the applicable part standard. Key requirements include a mandatory Certificate of Quality Compliance (Mill-Material Certification) with every shipment and dimensional conformance inspection for Class 3A and 3B threads per System 22 of FED-STD-H28/20. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with zero non-conformances required for acceptance. Packaging and marking must comply with MIL-STD-129, MIL-STD-130N, and ASTM D3951, with DLA Master List requirements taking precedence. This solicitation is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small businesses. Offerors must comply with the Buy American Act, the Berry Amendment, and various cybersecurity regulations, including DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the use of additive manufacturing is prohibited unless specifically authorized. Invoicing and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-27-T-6071
Solicitation SPE4A6-27-T-6071, issued by the DLA Weapons Support ASC Commodities Division on October 23, 2026, is a request for quotations for nine hexagon head cap screws, part number MS90725-113 (NSN 5305013258388). The items must be manufactured in accordance with NASM90725 Revision 04 and delivered to DLA Distribution Albany, Georgia. The required delivery date is June 22, 2027, with a need ship date of April 20, 2027. This is not a small business set-aside procurement and falls under NAICS code 332722. The contract mandates strict quality and environmental standards, including a total prohibition of mercury or mercury compounds in the hardware, preservation, and packaging. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Shipping is designated as FOB Origin. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing, and the Buy American Act.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEY
Solicitation # SPE4A6-27-T-5979
Solicitation SPE4A6-27-T-5979 is a Request for Quotations issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of 16 key washers, identified by NSN 5310-01-066-3928. These items are designated as critical application items and must be manufactured according to specific technical drawings, including Basic Drawing 19207 12274522 Revision F. The delivery is required within 264 days after order, with a need ship date of July 22, 2027, and delivery to DLA Distribution San Joaquin in Tracy, California. This is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. The contract mandates strict adherence to quality and technical standards, incorporating the DLA Master List of Technical and Quality Requirements and requiring sampling per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the Berry Amendment. Inspection and acceptance will occur at the destination per FAR 52.246-2.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-27-T-6265
Solicitation SPE4A6-27-T-6265, issued by the DLA Weapons Support ASC Commodities Division, is a fixed-price request for quotations for 261,000 machine screws, part number NAS1218-06E5 (NSN 5305011303257). This item is designated as a critical application item and must be manufactured in accordance with the current revision of the NAS1218 non-government standard. The procurement is not a small business set-aside, though a price evaluation preference is available for certified HUBZone Small Business Concerns. Offers involving additive manufacturing are prohibited. The contract mandates strict quality and inspection standards, requiring manufacturer compliance with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must adhere to ASTM D3951 and RP001, with labeling following MIL-STD-129 and MIL-STD-130N. Delivery is required within 206 days, with a need ship date of May 25, 2027, and a final delivery destination of DLA Distribution Jacksonville, Florida. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 332510
New
SLED
Galvanized Fir Moulding Staples SupplierThis subcontract agreement establishes the supply of 500 galvanized fir moulding staples for prime contractors working on Nashville Electric Service projects in Nashville. The required staples must measure 3" x 1 1/2" x 1/4" and be delivered in cartons of 100 units. To ensure quality and compatibility, the supplier must provide specific approved part numbers from Maclean, LJ Indus, Hubbell, or Larson, as alternate brands are strictly prohibited. The solicitation was posted on October 30, 2026, with a response deadline of November 4, 2026.
Hardware Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 335999
New
SLED
Supply of Pre-Assembled Horizontal Line Post InsulatorsThis subcontract involves the supply of 120 pre-assembled horizontal line post insulators for prime contractors working on Nashville Electric Service utility projects in Nashville. The contractor is responsible for manufacturing or sourcing polymer or silicone rubber insulators equipped with two-bolt gain bases and trunion clamps. All units must meet specific technical requirements, including 565KV/700KV flashover and 1750 lbs cantilever strength ratings. To ensure quality and compatibility, the contract mandates the use of approved brands such as Ohio, Victor, MVA Power, Locke, Hubbell, Balestro, Lapp Ins, or Maclean. The selected provider must deliver the components as completed assemblies. The solicitation was posted on October 30, 2026, with a response deadline of November 6, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 423610
New
SLED
Schweitz Engineering Laboratories (SEL) Hardware SupplierThis subcontract involves the procurement and delivery of specialized hardware for Nashville Electric Service utility infrastructure projects. The supplier is responsible for providing specific Schweitz Engineering Laboratories components, including SEL-2100 logic processors, SEL-2812 multimode fiber optic transceivers with IRIG-B transmitters, and IRIG-B receivers. To ensure system compatibility and performance, the contract strictly mandates the use of the specified brand, and no alternate brands will be accepted. The hardware must be delivered directly to Nashville Electric Service in Nashville, Tennessee. This opportunity is categorized under NAICS code 423610 and is intended for suppliers capable of supporting prime contractors on these critical utility projects. Interested parties should note the response deadline of November 6, 2026.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 423610
New
SLED
Fiber Optic Duplex Jumper SupplierThis subcontract agreement is for the supply of 13 units of 2-fiber 62.5/125 duplex ST-ST 15-meter fiber optic jumpers to support prime contractors on Nashville Electric Service procurement projects in Nashville. The contract mandates the use of specific brands, requiring either Applied or Quiktron hardware, and explicitly prohibits the use of alternate brands. The procurement is categorized under NAICS code 423610 and requires the supplier to adhere to a strict delivery window. Interested parties must respond by November 6, 2026, to provide the specified equipment for the Tennessee-based agency.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 335999
New
SLED
Supplier of Non-Metallic 20-Inch Arm CablesThis subcontract agreement establishes the procurement of 120 non-metallic 20-inch arm cables for prime contractors working on Nashville Electric Service utility projects in Nashville. The required hardware must meet specific technical standards for non-metallic arms with tie down slots for use with underground devices back #CR36, specifically requesting the UNDERGRO RA20 model or a verified equivalent made of non-metallic plastic. To be eligible for this contract, the supplier must be an approved manufacturer or an authorized distributor. The solicitation was posted on October 30, 2026, with a response deadline of November 6, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 484220
New
SLED
Heavy Haul Logistics (Over-length Utility Poles)This subcontract for Heavy Haul Logistics involves the over-dimensional transportation of 95-foot steel poles for prime contractors working on Nashville Electric Service infrastructure projects. The scope of work requires the use of extendable flatbed trailers to transport 10 steel poles from the manufacturer to a specific delivery site at 1214 Church St. in Nashville, Tennessee. Logistical coordination is a critical component of the contract, with deliveries scheduled from Tuesday through Friday. The contractor must adhere strictly to NES-approved loading diagrams to ensure that the poles are delivered in the correct sequence for efficient organization within the storage yards.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332312
New
SLED
Steel Utility Pole Supplier (95ft H4 Class)This subcontract involves the fabrication and supply of 10 high-capacity steel utility poles for prime contractors working on Nashville Electric Service electrical infrastructure projects. Each pole must be at least 95 feet in length with a 0460 FT-KIPS capacity, meeting Class H4 standards and consisting of no more than two sections. Technical requirements include precision drilling according to NES specifications and hot-dipped galvanizing in compliance with ASTM A123. The completed, galvanized steel poles are to be delivered to Nashville, Tennessee. The solicitation was posted on October 30, 2026, with a response deadline of November 13, 2026. This project falls under NAICS code 332312 and is managed through the Nashville Electric Service procurement system.
Fabricated Structural Metal Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
SLED
Flatbed Delivery of Electrical EquipmentThis subcontract involves the transportation of ten high-voltage electrical switches for prime contractors working on Nashville Electric Service projects. The selected provider will be responsible for hauling the equipment from the manufacturer or warehouse to a designated delivery site in Nashville using an open flatbed truck as mandated by the agency. To qualify for this engagement, the contractor must possess standard commercial trucking licenses and the required insurance coverage. The project is categorized under NAICS code 484220, with a response deadline set for November 6, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 335311
New
SLED
Supply of 1200 Amp Load Break SwitchesThis subcontract involves the supply of 10 high-voltage load break switches for prime contractors working on Nashville Electric Service projects in Nashville, Tennessee. The required equipment must feature a 1200 Amp continuous ampacity, 34.5KV nominal voltage, 200KV B.I.L., and a 30,000 AMPS RMS asymmetrical one-time fault closing duty cycle. Additionally, the switches must be designed for outdoor mounting on steel, concrete, or wood poles. The procurement falls under NAICS code 335311 and was posted on October 30, 2026, with a response deadline of November 6, 2026. Interested parties must ensure the manufactured or sourced units meet all specified technical electrical ratings to be compatible with the utility infrastructure.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 484220
New
SLED
Specialized Transport for Utility Steel PolesThis subcontract involves the specialized transportation and delivery of oversized steel poles for prime contractors working on Nashville Electric Service projects. The selected provider will be responsible for hauling 100-foot sections using flatbed trailers equipped with multi-layer individual strapping systems, ensuring all deliveries are made to the NES facility in Nashville, Tennessee. To maintain operational efficiency, deliveries must be coordinated between Tuesday and Friday, with a specific requirement that two-piece poles are transported on the same truck. Qualified contractors must possess a valid Commercial Driver's License and obtain all necessary Oversize and Overweight permits to legally transport the materials. This opportunity falls under NAICS code 484220, with a response deadline set for November 16, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 332312
New
SLED
100ft Steel Utility Pole Supply (H7 Equivalent)This subcontract involves the supply of six 100-foot steel utility poles for prime contractors working on Nashville Electric Service projects in Nashville. The poles must be fabricated to meet a minimum groundline moment capacity of 0721 ft-kips, adhering to wood pole class H7 standards. Technical requirements include hot-dip galvanizing in accordance with ASTM A123 and precision drilling that meets NES Specification LSK-1230. To qualify, the provider must maintain approved manufacturer status and utilize precision drilling equipment to deliver the completed, galvanized, and drilled poles. The solicitation was posted on October 30, 2026, with a response deadline of November 16, 2026.
Fabricated Structural Metal Manufacturing

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 423610
New
SLED
Supply of Burndy Connector Wedge BoltsThis subcontract involves the procurement and delivery of 17 specialized electrical connectors for prime contractors working on Nashville Electric Service utility projects. The contract specifically requires Burndy part number WADM795CON, which are Connector Wedge Bolt 900A Inline Discs designed for use with 795 sized wire. To ensure strict technical compliance, the contract mandates a no-alternate-brand policy, requiring the supplier to hold authorized distributor status. The performance of this contract will take place in Nashville, Tennessee, under NAICS code 423610.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 4 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332722
New
SLED
Machine Bolts
Solicitation # Z5451
Nashville Electric Service

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
SLED
Electrical Connectors & Fasteners
Nebraska Public Power District

POSTED

4 days ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
SLED
Stainless Steel Hex Cap Screw Supplier
City of Tacoma

POSTED

4 days ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
SLED
Galvanized Steel Nut Supplier
City of Tacoma

POSTED

4 days ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
SLED
Fasteners
Solicitation # CT26-0233N
City of Tacoma

POSTED

4 days ago

DEADLINE

in 5 days
View Details
NAICS: 332722
Closed
SLED
BOLT,1/4"-20 X 1 1/4",GRADE 5 ZINC (Box of 100) - ref 2101147
Solicitation # 2101147
Dallas Area Rapid Transit

POSTED

5 days ago

CLOSED

1 day ago
View Details
NAICS: 332722
New
SLED
Supply of Machine Bolts (5/8" x 12")
Nashville Electric Service

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
SLED
Supply of Carriage Bolts (3/8" x 4 1/2")
Nashville Electric Service

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
SLED
Carriage Bolts and Machine Bolts
Solicitation # Z5436
Nashville Electric Service

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 332722
SLED
Guardrail Hardware: Bolts, Nuts, Washers & Plates
DGS - Statewide Procurement

POSTED

9 days ago

DEADLINE

in 15 days
View Details
NAICS: 332722
Closed
SLED
Guardrail Hardware Supplier
MPTAP

POSTED

9 days ago

CLOSED

5 days ago
View Details
NAICS: 332722
Closed
SLED
Supply of Brass Hex Nuts (10/32)
Nashville Electric Service

POSTED

9 days ago

CLOSED

5 days ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS