Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BRACKET, VEHICULAR C

Active
SPE7LX-26-U-8916Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two vehicular brackets, identified by NSN 2590-01-702-2659, under solicitation SPE7LX-26-U-8916, with a total delivery requirement to be met within 113 days after order. The solicitation is a total small business set-aside under FAR 19.5, with NAICS code 333310, managed by the Department of Defense’s Strategic Acquisition Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date or award date depending on the acquisition size. The item involves technical data subject to export controls under ITAR or EAR, and disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and only contractors with approved JCP certification, completed DLA export control training, and formal DLA approval may access the controlled data. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed. The solicitation closed on August 5, 2026, and the point of contact is Theodore Misiolek of the DLA.

General Info

Procure two vehicular brackets under DLA solicitation, ITAR/EAR controlled, small business set-aside, JCP-certified contractors only.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRACKET,VEHICULAR C
BRACKET,VEHICULAR C
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2590-01-702-2659 Quantity: 2 EA Purchase Request: 1000237684QTY: 2 Delivery: 113 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
TEST SET SUBASSEMBLThis contract pertains to the procurement of two units of a test set subassembly identified by NSN 4921-01-029-3054 and part number CA70251, under solicitation SPE7M0-26-T-014D. The delivery must occur within five days of order placement, with FOB origin terms and no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 specifications, utilizing approved methods and materials while avoiding plastics where possible, as required by DLA packaging standards. The item is to be delivered to a military facility in Derince, İzmit, Turkey, with freight handled by PTK00A at NUWC Newport, and must be palletized and marked in accordance with all referenced defense standards. The contract prohibits the use of Class I ozone-depleting chemicals and mandates adherence to all technical and quality requirements listed in the DLA Master List, which controls based on the solicitation issue date. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the supplier must ensure compliance with the DLA procurement framework including oversight of government identification removal on non-accepted supplies. The solicitation is issued by the Department of Defense through the Maritime Supply Chain ESOc Buys office, with a response deadline of August 3, 2026, and an original required delivery date of July 23, 2026. The item is classified under NAICS code 333310 and is subject to federal procurement rules. Special marking is not required, and the unit of issue is each. The point of contact is Audrey Acuna, and the full technical and quality specifications are incorporated by reference through DLA’s official master list. All deliveries are to be coordinated to the specified Turkish military address and governed by the DoD’s authorized unit of issue guidelines. The contract does not permit substitutions without prior approval, particularly for chemicals or packaging materials, and remains binding under all applicable defense acquisition regulations.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR CThis contract pertains to the procurement of one unit of a vehicular bracket designated by part number LS1104696 and NSN 2590-01-661-6799, issued under solicitation SPE7L1-26-T-858F by the Department of Defense through the Land Supply Chain. The item must be delivered within five days to Fort Benning, Georgia, FOB origin, with no variance allowed in quantity and inspection and acceptance taking place at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes applied. The bracket must be palletized in accordance with DLA standards and shipped via traceable freight methods, explicitly excluding parcel post. Ozone-depleting chemicals are strictly prohibited in manufacturing or incorporation, and any substitute materials require prior approval unless already authorized by specification. The delivery is linked to a specific government shipment identifier, with a required delivery date of July 22, 2026, and the supply chain point of contact is Kristina Derry. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
COVER, ACCESSThis contract pertains to the procurement of one unit of a specific item identified by NSN 2590-12-418-1466 and part number 864007201, with a delivery requirement of five days from the award date under FOB origin terms. The item must be packaged in compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory labeling per MIL-STD-129. Packaging and palletization must adhere strictly to DLA’s RP001 packaging standards, with no tolerance for quantity variance—exactly one unit must be delivered. Ozone-depleting chemicals are strictly prohibited in any material or process related to this contract, and any substitute chemicals require prior approval unless explicitly authorized by the governing specifications. The delivery destination is the Central Receiving Point at Fort Carson, Colorado, with shipments required to be sent by the fastest traceable method and explicitly excluding parcel post. All packaging must be marked with the specified freight and mark-for addresses, including the TCN W80BTZ61980097 and RDD 999 designation. The procurement is governed under solicitation SPE7L1-26-T-858T, with a required delivery date of July 22, 2026, and is classified under NAICS code 333310. The contract is subject to federal procurement rules, requires compliance with DoD unit of issue standards, and is managed by the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
MANDREL, DENTAL HANDPIEThe contract pertains to the procurement of a straight screw head mandrel designed for use with screw-in type abrasive disks and abrasive wheels in dental handpieces, with each package containing twelve units. The item is identified by the NSN 6520-01-568-0437 and is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which must be adhered to as per the revision in effect on the solicitation or award date. Packaging must comply with DLA standards, and all supplies must be free of mercury or mercury-containing compounds except for specific, exempted applications such as batteries, fluorescent lamps, and certain instruments, with any mercury-containing portable devices requiring shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and bidders are required to clearly specify the source and part number being offered. The solicitation, issued under number SPE2DS-26-T-255X by the Department of Defense’s Medical Supply Chain, has a response deadline of July 27, 2026, with delivery expected within 20 days after award, and performance will occur at FPO, ZIP 09578.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333310
New
DIBBS
TOOL AND EQUIPMENT KIT
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
TWISTLOCK, RETRACTAB
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
DIBBS
DENTAL KIT, EMERGENCYThe Emergency Dental Kit, model JBC-DENT-01, is a commercially packaged unit containing a variety of quality dental instruments and products designed for urgent medical needs. Each kit must be sealed in a protective container to prevent damage or breakage and packed in commercial shipping containers suitable for safe transport by common carriers at the lowest cost to the designated delivery point, including export requirements when applicable. All materials must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and proper labeling is mandatory. The unit of issue is each (EA), and the item is identified by NSN 6520-01-603-3451 with a quantity of one unit required under Purchase Request 7017552954, with delivery due within 20 days of award. The solicitation is governed by the DLA Master List of Technical and Quality Requirements, with applicable standards tied to the solicitation or award date depending on acquisition type, and covered defense information may apply. Packaging must adhere to DLA requirements, and non-accepted supplies must have government identification removed. Bidder must specify the source and part number supplied, and all terms are governed by Contract SPE2DH-26-T-5362 issued by the Department of Defense’s Medical Supply Chain FSH, with inquiries directed to Tina Vu at DLA.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333310
New
DIBBS
METER, SPECIAL SCALE
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
Federal
4520--Heater Bundle Replacement in Boiler Plant One Time Repair
Network Contract Office 19 (36C259)

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
Federal
25--TWISTLOCK,RETRACTAB
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
Federal
TELESCOPE,PANORAMIC
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333310
New
Federal
25--BRACKET,VEHICULAR C
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 326122
New
DIBBS
CLAMP, LOOPThis contract, identified by solicitation number SPE7LX-26-U-8911, is a Total Small Business Set-Aside for the procurement of CLAMP, LOOP with NSN 5340-01-611-4025 and part numbers 90531K and VT10592AA01-3HN from CUMMINS FILTRATION INC. and NORMA PENNSYLVANIA INC. DIV BREEZE respectively. The requirement, for 240 units at a unit price of $1 each, is designated as a DLA DIRECT, CONUS delivery with FOB ORIGIN terms and no quantity variance allowed. Delivery must be completed within 116 days, with inspection and acceptance occurring at the destination. Packaging must strictly comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. If the item is classified as hazardous under FED-STD-313, packaging must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is permitted, but all packaging and labeling must conform to MIL-STD-129. Palletization must adhere to RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT. The contract is part of a broader framework incorporating technical and quality specifications referenced through R and I numbers found on the DLA website. The solicitation, issued by the Department of Defense’s Strategic Acquisition Program Directorate, is closed to small businesses only and was posted on July 21, 2026, with responses due by August 5, 2026. The unit of issue is each (EA), and quantities are fixed with no allowance for adjustment. The point of contact for inquiries is Theodore Misiolek, with details provided for email and phone. The contract references a comprehensive set of DLA packaging and quality standards that must be met without exception, and all packaging must be marked and labeled in compliance with MIL-STD-129. While the quantity listed is an estimate, the buyer is not obligated to purchase the full amount, but any awarded contract must strictly follow the defined technical, packaging, and delivery protocols outlined. The NSN and part number are critical identifiers for compliance and logistics tracking, and suppliers must ensure all documentation aligns with the DLA’s eProcurement and unit of issue guidelines.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThis contract pertains to the procurement of six plain seals identified by NSN 5330-01-503-4930 under solicitation SPE7LX-26-U-8895, with a delivery requirement of 301 days after award. The item is subject to extensive technical, quality, and export control requirements as defined by the DLA Master List of Technical and Quality Requirements, which incorporate MIL-STD-1916 or ASQ H1331 for sampling unless otherwise specified, with zero non-conformances required in the sample lot unless explicitly stated otherwise. Critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are treated as major. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to prevent ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, or chemical reagents authorized by NAVSEA; where permitted, portable devices must include a second barrier of containment per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals, deviation requests, and source approval documentation, while inspection and acceptance may occur at origin, and all government identification must be removed from non-accepted items. Technical data associated with this contract is subject to export controls under ITAR or EAR, and access is restricted to DLA contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and been approved by DLA. All contractual obligations are governed by tailored higher-level quality requirements and specific documentation standards for verification and compliance.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
LEVER, LOCK-RELEASEThe contract pertains to the procurement of a Lever, Lock-Release with NSN 5340-01-453-2554 and part number A6210372, under solicitation SPE7LX-26-U-8896, issued by the Department of Defense’s Strategic Acquisition Program Directorate. A total quantity of 135 units is requested at a unit price of $135.00, for a total contract value of $18,225. Delivery is required within 65 days FOB origin, with no variance allowed in quantity. The item is covered under DLA Direct, CONUS terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s packaging requirements and MIL-STD-129 for marking and labeling, with non-hazardous material packaged per ASTM D3951 unless a higher-priority DLA Master List technical or quality requirement applies. Hazardous materials must follow TQ requirement IP025 per Fed-Std-313. The packaging must also adhere to the DLA Packaging Requirements for Procurement (RP001) and palletization standards. Identification of the item must conform to MIL-STD-130N for military property marking, and the contractor must ensure all government identification is removed from non-accepted supplies. The solicitation is open via DIBBS, and the contract is subject to the revision of the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. The primary point of contact is Theodore Misiolek, with response due by August 5, 2026.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
TREAD, METALLIC, NONSKIDThe contract is for the procurement of two units of metallic nonskid tread with the NSN 2540-01-593-9652 under solicitation SPE7LX-26-U-8910, designated as a Total Small Business Set-Aside. Delivery is required within 109 days after award, and responses must be submitted by August 5, 2026. The item is governed by DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions including tailored higher-level quality standards, configuration change management, inspection and acceptance at origin, and strict controls on government identification removal from non-accepted supplies. Only qualified manufacturers listed on approved QPLs or QMLs may supply components, and the contract enforces compliance with MIL-STD-1916 or comparable zero-based sampling plans, assigning verification levels and AQLs according to criticality of attributes. Ozone-depleting chemicals are strictly prohibited, and substitute chemicals require prior approval unless explicitly permitted by specification. Technical data is subject to export controls under ITAR or EAR, restricted to contractors with approved JCP certification, completed DLA training, and authorized access. The contract mandates CMMC Level 2 certification for third-party assessors and requires phosphate coating suppliers to meet specific certification standards. The approved source of supply has been updated from Devcon Corp to ITW Polymers Adhesives North America for part numbers PK9500-3/2 and PK9500-3/2-7. The contracting office is the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 314910
New
DIBBS
BAG, CARTRIDGE CLIPThe contract is for the procurement of a neoprene-coated cloth cartridge clip, a critical gun part designated as a Category I munitions item under demilitarization requirements, with strict compliance mandated for technical specifications referenced in the DLA Master List of Technical and Quality Requirements. The item, identified by NSN 1005-01-182-4536 and part number 65751-03013-041, must conform to exact engineering drawings and revision standards, and the actual manufacturer must be formally identified and approved prior to award, with any subsequent changes requiring official contract modification. The product is subject to Product Verification Testing (PVT) before each shipment, requiring five samples from each subcontractor involved in production, one of which may be destroyed during testing, and all samples must be properly marked and traced to their source. Inspection and acceptance occur at the manufacturer’s facility under the Quality Assurance Representative, following zero-defect sampling criteria aligned with MIL-STD-1916 or comparable zero-based plans, with critical attributes held to the highest verification levels and specified AQLs. Packaging must adhere to MIL-STD-2073-1E and DLA requirements, including marking per MIL-STD-129, and no ozone-depleting chemicals are permitted under any circumstances. The contract is a total small business set-aside under NAICS code 314910, with a delivery window of 134 days, FOB origin, no quantity variance allowed, and a unit price of $5.00 for a total of five units.
Textile Bag and Canvas Mills

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP.This contract, identified as CLAMP, LOOP, is a solicitation under number SPE7LX-26-U-8888 issued by the Strategic Acquisition Program Directorate within the Department of Defense for the procurement of eight units of a specific clamp and loop component with NSN 5340-00-582-1474. The solicitation is a total small business set-aside under NAICS code 332510, with responses due by August 5, 2026, and an anticipated delivery deadline of 48 days after award. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, subject to any amendment updates. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific functional applications including batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary to prevent leakage, per NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and full compliance with these stipulations is mandatory for contract fulfillment.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract is for the procurement of three mounting brackets with NSN/Part Number 5340-01-693-6794 under solicitation SPE7LX-26-U-8898, with a delivery requirement of 81 days after contract award. The acquisition is structured as a Total Small Business Set-Aside under NAICS code 332510, indicating exclusive eligibility for small businesses. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Commerce, including foreign national employees of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire, may access the controlled data. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
HOUSING ASSY, FEEDERThe item specified is a Housing Assembly, Feeder, manufactured via metal casting, requiring specialized tooling for production, with sourcing and technical support available through DLA’s Aviation, Land & Maritime Supply Chains. The procurement is governed by a comprehensive set of technical, quality, and compliance requirements including CMMC Level 2 certification for third-party assessors, tailored higher-level quality standards for manufacturers and non-manufacturers, and strict configuration change management protocols requiring formal engineering change proposals or variance requests. Inspection and acceptance must occur at origin, and non-accepted items must have all government identification removed. Physical identification of the bare item is mandated, and technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior Department of State or Commerce authorization, with DFARS 252.225-7048 fully applicable. Access to this controlled data is restricted to DLA contractors who hold JCP certification, have completed mandatory DOD export control training, and received formal approval from DLA. The solicitation, identified as SPE7LX-26-U-8906, is a total small business set-aside under NAICS code 332994, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Four units are required with a delivery deadline 186 days after award. The solicitation closed on August 5, 2026, with a posted date of July 21, 2026. Demilitarization requirements apply as this item falls under Category I Munitions List items per DoDM 4160.28-Vol. 3, and it is subject to DLA packaging standards and covered defense information protocols. All technical and quality specifications referenced must be drawn from the DLA Master List in effect on the solicitation issue date. The primary point of contact for inquiries is Theodore Misiolek of DLA, reachable via email or phone provided.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThis contract specifies the procurement of a power supply with NSN 6130-01-502-8006, quantity of six units, under solicitation SPE7LX-26-U-8892, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required FOB origin within 104 days with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to all DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging, MIL-STD-129 for marking and labeling, and PALLETIZATION standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated a critical application, and mercury or mercury-containing compounds are strictly prohibited except for specific exempted uses such as batteries, fluorescent lights, or instrumentation per NAVSEA guidance, with portable mercury-containing devices requiring shockproof design and secondary containment. All technical and quality requirements referenced by R or I numbers in the DLA Master List govern over general standards. The unit of issue is each, and the contract is issued under DLA Direct, CONUS coverage.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
CLEVIS, ROD ENDThe item specified is a CLEVIS, ROD END with NSN 5340-01-579-1843, for a quantity of 61 units, under purchase request 1000237681, with delivery required within 111 days after order. The procurement is conducted under solicitation SPE7LX-26-U-8901, issued on July 21, 2026, with responses due by August 5, 2026. This is a total small business set-aside under FAR 19.5, classified under NAICS code 332722, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item includes export-controlled technical data subject to ITAR or EAR, restricting disclosure or export to authorized parties only. Access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized clearance via the DLA. DFARS 252.225-7048 governs the handling of this data, including restrictions on foreign nationals, even when employed by U.S. entities. Government identification must be removed from non-accepted supplies, and the primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
BALL JOINTThe contract is for the procurement of a ball joint with NSN 3040-01-600-1867 and part number 2998K321 from McMaster-Carr Supply Co, under solicitation SPE7LX-26-U-8915, with a total quantity of 16 units at a unit price of $16.00, resulting in a total price of $256.00. The requirement is designated as a Total Small Business Set-Aside under NAICS code 333613, and delivery must be made within 49 days FOB origin with no tolerance for quantity variance. All items must be packaged and marked in strict compliance with MIL-STD-129 and ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence over any material standard. Inspection and acceptance occur at the destination point, and packaging must follow DLA’s Packaging Requirements for Procurement (RP001), including palletization standards. The U/I is EA and the QUP is specified as 001, meaning each unit pack contains one item. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. Primary point of contact is Theodore Misiolek, reachable via phone or email. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation issue date for simplified acquisitions. The item is covered under DLA Direct, CONUS, and the contract explicitly states that the estimated quantity may not be fully purchased by the IDC. All documentation and labeling must conform to the referenced standards and DLA directives without exception.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327999
New
DIBBS
KNOBThis contract, identified as KNOB under solicitation number SPE7LX-26-U-8891, is a total small business set-aside for the procurement of 68 units of a knob with NSN 5355-01-382-5286, requiring delivery within 88 days after award. The contract incorporates stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. Zero-tolerance policies are enforced for hazardous materials: ozone-depleting chemicals are completely prohibited, and mercury or mercury-containing compounds are banned unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. All items must be asbestos-free, and any substitutions require formal approval under clause L30 and provision 4 conditions. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract explicitly prohibits the use of government identification on non-accepted supplies and mandates full and open competition under a small business set-aside, with Theodore Misiolek designated as the primary point of contact for inquiries.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details