Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BRAID, WIRE

Active
SPE7M2-26-T-5694Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for 48,400 feet of braid wire, specified as a critical application item, with a single continuous length per 100-foot spool, conforming to CID A-A-59569D Revision D dated 12/09/2019 and the latest revision of MIL-DTL-12000 for preservation and packaging. It is identified by NSN 6145-01-566-0164 and purchase request number 7015606048, under solicitation SPE7M2-26-T-5694, which is a total small business set-aside with NAICS code 331420. Delivery is required within 17 days of award, with shipment FOB origin and a permitted quantity variance of plus or minus five percent. Inspection and acceptance both occur at destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the use of unit pack code U and proper palletization as defined in DLA’s packaging requirements. Preservation methods, wrapping, and cushioning materials are designated as ZZ, indicating vendor selection in accordance with technical standards, and all packaging must adhere to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of August 18, 2026, and the original delivery due date set for August 26, 2026. The point of contact for the procurement is Samuel Raco, with full solicitation details and response deadlines specified in the contract data, and all transportation logistics follow prescribed DLA procedures.

General Info

48,400 feet of braid wire, NSN 6145-01-566-0164, delivery due August 26, 2026, to New Cumberland, PA.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

331420 - Copper Rolling, Drawing, Extruding, and AlloyingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE7M2-26-T-5694 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
SAMUEL RACO
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRAID,WIRE
BRAID,WIRE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
100 FT/SPOOL,ONE CONTINUOUS LENGTH
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC CID A-A-59569D REVISION NR D DTD 12/09/2019 PART PIECE NUMBER: AA59569R30T0500
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015606048 0001 FT 48,400.000
NSN/MATERIAL:6145015660164
DELIVERY (IN DAYS):0017
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 5% MINUS 5%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:100 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
SPE7M2-26-T-5694
SECTION B
PR: 7015606048 PRLI: 0001 CONT’D
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-12000, FOR CABLE, CORD AND WIRE.
..
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:08/18/2026 Original Required Delivery Date:08/26/2026
SPE7M2-26-T-5694 NSN/Part Number: 6145-01-566-0164 Quantity: 48,400 FT Purchase Request: 7015606048QTY: 48400 Delivery: 17 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331420
New
DIBBS
Bent Metallic Tube Manufacturing and SupplyThe contract is for the manufacture and delivery of precision bent metallic tubes identified by NSN 4710015955482, manufactured to meet strict technical specifications established by the Defense Logistics Agency. The supplier must ensure full compliance with all DLA requirements regarding material composition, dimensional accuracy, surface finish, and performance standards, with no deviations permitted. Each component must be appropriately packaged and labeled in accordance with federal and military standards to ensure traceability, handling safety, and readiness for immediate deployment. The finished product must be shipped to the designated delivery point at DLA New Cumberland, Pennsylvania, with all documentation verifying adherence to quality assurance protocols, including certifications of conformance and inspection records. This is a subcontract solicitation under NAICS code 331420, indicating the work falls within the forging and stamping industry sector, and was posted on July 20, 2026, with a firm response deadline of July 31, 2026. The contracting office is the Fluid Handling Division within the Department of Defense, and the place of performance is explicitly set as New Cumberland, with a ZIP code of 17070-5002. All deliveries must be coordinated to meet the specified timeline and location, and failure to meet contractual obligations regarding specification, packaging, labeling, or delivery may result in non-compliance penalties or contract termination. Participation requires proven capability in high-precision metal forming and experience with government defense logistics systems.
FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
Seamless Copper Refrigeration Tubing ManufacturingThe contract requires the manufacture of 10-foot seamless copper refrigeration tubing adhering to strict military specifications, encompassing the entire production process from extrusion through final dimensional verification and packaging preparation. The tubing must meet exacting quality and performance standards to ensure reliability in defense-related refrigeration systems, with all steps rigorously controlled to maintain consistency and compliance. The work involves precision engineering and material handling to deliver tubing that satisfies technical requirements for use in critical military applications. The contract is classified as a subcontract under NAICS code 331420 and is managed by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS, with performance required at Fort Bragg, North Carolina, zip code 28310. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, indicating a tight turn-around for qualified vendors to submit proposals. Interested parties must be prepared to demonstrate capability in producing seamless copper tubing to military standards, including the ability to perform all necessary inspections and packaging procedures in compliance with defense procurement protocols.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLY SET, MThis contract is for a single unit of a Tube Assembly Set, M, with NSN 4710-01-589-2585 and part number L4812305-011, procured under solicitation SPE4A0-26-T-3954 by the Department of Defense for delivery to Tinker Air Force Base. The item is designated as a critical application and must comply with stringent technical, quality, and packaging standards referenced from the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 for manufacturers and non-manufacturers. Compliance with MIL-STD-2073-1E packaging, MIL-STD-129 marking, and DLA-specific packaging requirements is mandatory, with no special marking required. The item must be delivered within five days under FOB Origin terms, with zero tolerance for quantity variance, and inspected and accepted at the destination. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and covered defense information protocols apply. The item is not subject to Item Unique Identification, per DFARS 252.211-7003(c)(1)(i). Delivery must be shipped by traceable freight methods, excluding parcel post, and must include the assigned RDD and project details. The contract mandates the use of authorized DoD units of issue and provides detailed shipping and receiving addresses for Tinker AFB, with a primary point of contact at DLA. The required delivery date is July 13, 2026, and the solicitation response deadline is July 28, 2026. All suppliers must meet the specified quality assurance provisions, test equipment standards, and documentation requirements for source approval, and all documentation must reflect the correct revision of DLA standards in effect on the applicable date. The contract includes no set-aside designation and is issued under NAICS code 331420 for manufacturing of other fabricated metal products.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLY, METALThis contract, identified by solicitation number SPE7M1-26-U-4492, is for the procurement of a metal tube assembly with NSN 4710200068279, designated as a Critical Application Item by Armatec Survivability Corp under part number AC86195-18. The contract is structured as an indefinite-delivery contract, binding only upon issuance of a delivery order, with an estimated quantity of 84 units and a maximum ceiling value of $350,000. Delivery is required within 84 days of the award date, FOB Origin, and is subject to strict packaging and labeling requirements governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. All packaging must comply with MIL-STD-129 for marking, labeling, and bar-coding, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitution requires prior approval unless explicitly authorized by specification. Inspection and acceptance occur at the destination point, with government authorities responsible for both functions under FAR 52.246-2. The contract incorporates numerous FAR and DFARS clauses addressing critical compliance areas including safeguarding contractor information systems, NIST SP 800-171 assessment requirements, unauthorized obligations, payment acceleration for small business subcontractors, substitution of commercial products, and hazard communication for hazardous materials, with mandatory submission of hazard warning labels for non-exempted substances. Offerors are required to provide their Unique Entity Identifier and CAGE code, certify their small business status including specific socioeconomic categories such as HUBZone, SDVOSB, WOSB, or 8(a), and disclose any involvement with covered defense telecommunications equipment under clause 252.204-7016. Proposals must be submitted electronically through the DLA BSM DIBBS portal by the deadline of August 4, 2026, and all invoicing must be processed via WAWF. The contract includes provisions for removal of government identification from non-accepted supplies, notification of radioactive materials prior to delivery, and adherence to transport regulations for sea shipments. No fixed unit prices are specified, and all pricing remains provisional until order issuance, with exact delivery locations and accounting details to be determined upon award.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 331420
New
DIBBS
TUBE, METALLICThe contract specifies the procurement of one 10-foot length of seamless copper refrigeration tube with a diameter of 0.875 inches and a wall thickness of 0.045 inches, identified by NSN 4710015908456 and part number 2LKJ6 from W.W. Grainger, Inc. The item must meet technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and it is subject to strict prohibitions against the use of Class I ozone-depleting chemicals, which supersede any conflicting specification requirements. A shelf life of 12 months applies and is non-extendable, and the product must comply with DLA packaging requirements under MIL-STD-2073-1E and marking standards per MIL-STD-129, including specific packaging and containment codes. Delivery is required within five days of contract award, FOB origin, to the designated military facility at Fort Bragg, North Carolina, with shipping permitted only via traceable freight methods—parcel post is explicitly prohibited. The delivery is non-negotiable with zero variance permitted in quantity, and inspection and acceptance occur at the destination. The contract references a required delivery date of July 17, 2026, and is issued under solicitation SPE7M0-26-T-013E with a response deadline of July 31, 2026, under a federal acquisition framework managed by the Department of Defense’s Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
GOVERNMENT FIRST ARTICThe contract is for the procurement of seven metal tube assemblies under solicitation SPE7M4-26-T-270T, with a delivery requirement of 474 days after award. The item is identified by NSN 4710-01-572-8920 and falls under NAICS code 331420. The contract incorporates stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and requires compliance with tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Configuration changes must be managed through formal engineering change proposals or requests for variance, and any non-accepted supplies must have government identification removed. The supplied technical data is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors who hold an approved US/Canada Joint Certification Program certification, have completed required DOD export control training, and have been approved by DLA. Cybersecurity compliance at CMMC Level 2 is mandatory for the offeror as a certified third-party assessment organization, and covered defense information applies to this procurement. Item Unique Identification is not required per the Service customer’s request, and packaging must conform to DLA specifications. The solicitation was issued on July 20, 2026, with responses due by July 31, 2026, and performance is to be delivered to Tracy, California, 95304-5000.
FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
TUBE, BENT, METALLICThis contract specifies the procurement of a metallic bent tube identified by NSN 4710-01-595-5482 and part number 129044-59010, supplied by YANMAR AMERICA CORPORATION. A total of 62 units are required, with each unit priced at $62.00, resulting in a total contract value of $3,844. Delivery is due within 167 days from the contract award, with a firm delivery date of January 15, 2027, and the item must be shipped FOB origin. The product is subject to strict compliance with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking required. The item has a non-extendable shelf life of 72 months, classified as TYPE I, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements. All substitute chemicals must be submitted for approval unless explicitly authorized. Inspection and acceptance occur at the destination, and the item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements referenced in the DLA Master List, and the governing revision is determined by the solicitation issue date. The unit of issue is each (EA), and transportation is governed by DLA procedural notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLY, METAL
FLUID HANDLING DIVISION

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331420
New
Federal
61--BRAID,WIRE
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
Federal
47--TUBE ASSEMBLY,METAL
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLYThis contract is for the procurement of a critical application tube assembly identified by Northrop Grumman Systems Corporation part number 123H10014-9097D-4 and NSN 4710-LN-003-3411, with a total quantity of six units required. The item must be delivered in full compliance with strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with palletization governed by RP001 DLA packaging requirements. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and the product is subject to inspection and acceptance at the destination point. Delivery is due within 84 days of contract award, with FOB destination terms applying and no variance permitted in quantity. The item is intended for delivery to Naval Air Station North Island in San Diego, California, and must be shipped to the designated DLA receiving facility at Naval Base Coronado. The solicitation number is SPEFA1-26-T-0260, issued by DLA Fleet Readiness Southwest under the Department of Defense, with a posted date of July 19, 2026, and a response deadline of July 27, 2026. The primary point of contact is Donnell Hall, reachable via phone and email. The purchase request number is 7017430946, and the unit price is $0, which implies a cost-free acquisition or that pricing is managed under a separate agreement. The item falls under NAICS code 331420 and is classified as a critical application item with multiple referenced technical and quality requirements including RA001, RP001, RQ017, ZD080, RS002, and RQ001. The original required delivery date is set for September 8, 2026, and the parcel post address and freight shipping address must be strictly followed to ensure proper logistics processing.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
CABLE, SPECIAL PURPOSE,The contract specifies the procurement of special-purpose electrical cable, identified by NSN 6145015619059, with a unit of issue defined as a spool containing 1,000 feet of continuous cable. A total quantity of 767 spools is required, divided into two line items: 37 spools to be delivered to Tracy, California, and 730 spools to be delivered to New Cumberland, Pennsylvania. Delivery is mandated within 133 days from the contract award, with FOB origin terms and no variance allowed in quantity. All items must comply with MIL-STD-2073-1E for packaging and MIL-DTL-12000 for preservation, with marking requirements strictly aligned to MIL-STD-129 and DLA packaging guidelines. The cable is classified as a commercial item, and suppliers must adhere to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website. The contract references specific part numbers from approved vendors including Condumex, Copperfield LLC, General Cable Technologies, and others. Final delivery must meet exact packaging, marking, and palletization standards, with no tolerance for deviations. The solicitation number is SPE7M1-26-T-219A, with a response deadline of July 30, 2026, and the point of contact is Alisha Blanton of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 541611
New
DIBBS
Government Supply Chain Compliance & Marking ServicesThe contract seeks to provide comprehensive compliance support for federal marking, reporting, and invoicing requirements tied to defense supply chain operations, with a focused emphasis on adherence to WAWF, MIL-STD-130N, and SAM.gov data management standards. This subcontract is designed to ensure accurate and timely fulfillment of federal labeling, asset tracking, and electronic reporting obligations across the Department of Defense’s nuclear reactor program, requiring precise execution of marking protocols for equipment and components and seamless integration of data into government-wide systems. The work is to be performed at a designated location in Albany, Georgia, with a strict deadline for responses set just three days after the solicitation was posted, indicating a rapid procurement cycle. The associated NAICS code 541611 confirms this is a professional, scientific, and technical services engagement, specifically in management consulting services, underscoring the need for specialized expertise in defense compliance rather than general logistical support.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, and labeling services for military fasteners in strict adherence to Department of Defense protocols, specifically requiring preservation method code 10 and compliance with MIL-STD-129 standards. All work must ensure that fasteners are protected against corrosion, properly identified, and labeled to meet military logistics and inventory requirements, maintaining readiness for deployment and use in defense applications. The services are critical to sustaining supply chain integrity for military hardware and must be executed without deviation from the specified technical and procedural guidelines. This subcontract is issued under NAICS code 493190 by the Nuclear Reactor Program within the Department of Defense, with performance centered in Albany, Georgia, at the zip code 31704-1128. The solicitation was posted on July 20, 2026, and responses are due by July 23, 2026, indicating a rapid turnaround for qualified subcontractors. The contract is not subject to any set-aside requirements, and interested parties must comply with all DLA-mandated procedures outlined in the referenced DIBBS RFQ system to ensure eligibility and timely submission.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing – Flat Washers (MS15795-858)The contract requires the manufacture and delivery of 16,667 flat washers conforming to the military specification MS15795-858, ensuring strict adherence to material composition, dimensional tolerances, and surface finish requirements as defined by DoD standards. The work is classified as a subcontract under NAICS code 332722, indicating precision fastener manufacturing, and is being procured by the Nuclear Reactor Program within the Department of Defense. All items must be delivered to the place of performance in Albany, Georgia, with the zip code 31704-1128, and must be completed and submitted prior to the response deadline of July 23, 2026. The solicitation was posted on July 20, 2026, and the full details can be accessed through the DIBBS portal using the provided link.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
DIBBS
Small Business Subcontracting Support (Accelerated Payments)
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541611
New
DIBBS
Export Control and Compliance Management
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Marking
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332721
New
DIBBS
Precision Machined Threaded Component Supply
Precision Turned Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and HandlingThe contract titled Hazardous Materials Compliance and Handling is a subcontract issued by the Department of Defense through its Nuclear Reactor Program, aimed at securing consulting and compliance services related to the proper handling, labeling, and disposal of hazardous materials in alignment with Department of Defense regulations. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, ensuring eligibility and preference for small businesses as defined by the Farm Bill and FAR 19.5. The NAICS code 541620 identifies the scope of work within environmental consulting services, requiring specialized expertise in regulatory adherence, safety protocols, and documentation for hazardous waste management. Performance of the contract is specifically required at Tracy, California, with a zip code of 95304-5000, indicating the physical location where these services must be rendered. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, allowing potential offerors a window of eleven days to prepare and submit proposals. The contract opportunity is accessible via the DIBBS platform, and all interested small businesses must ensure full compliance with DoD standards and timely submission to be considered.
Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Safeguarding ServicesThe contract pertains to the implementation and ongoing maintenance of cybersecurity controls designed to safeguard Covered Defense Information and ensure full compliance with the Cybersecurity Maturity Model Certification Level 2 requirements. The work involves establishing robust security measures aligned with NIST SP 800-171 standards to protect Controlled Unclassified Information, with a focus on continuous monitoring, risk management, and compliance validation. This effort supports the Department of Defense's broader objective of securing sensitive data across its supply chain through standardized cybersecurity practices. The contract is structured as a small business subcontract under a Total Small Business Set-Aside, with the North American Industry Classification System code 541512 indicating it relates to computer systems design services. Performance is required to be conducted at a designated location in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 20, 2026, and responses must be submitted by July 31, 2026. The procuring activity is the NUCLEAR REACTOR PROGRAM under the Department of Defense, and all work must comply with federal acquisition regulations governing subcontracting and cybersecurity obligations.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Labeling ServicesThe contract seeks to procure comprehensive military-compliant packaging, marking, and labeling services for materials managed under the Nuclear Reactor Program within the Department of Defense. All work must adhere to strict military specifications, including proper handling and documentation of hazardous materials as well as compliance with bar-code labeling requirements to ensure traceability and operational readiness. The solicitation is a total small business set-aside under the SBA program, meaning only qualified small businesses are eligible to respond, and the North American Industry Classification System code is 493190, indicating a focus on warehousing and storage services. Performance is required at a designated location in Tracy, California, with a zip code of 95304-5000. The opportunity was posted on July 20, 2026, and responses are due by July 31, 2026, with the procurement structured as a subcontract under the DLA’s DIBBS platform.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334310
New
DIBBS
Television Camera Supply and IntegrationThe contract calls for the supply of six military-spec television cameras under a small business set-aside program, reserved exclusively for small businesses as defined by the SBA. The equipment must meet stringent military standards for performance and durability, and all units must comply with specific packaging, labeling, and cybersecurity requirements to ensure operational security and logistics integrity. The work is to be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000, and the North American Industry Classification System code is 334310, indicating manufacturing of audio and video equipment. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the contracting entity is the Nuclear Reactor Program under the Department of Defense, operating as a subcontract opportunity through the DLA BSM system.
Audio and Video Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Government Contracting Compliance and ReportingThis contract requires support for electronic invoicing, receipt confirmation, and compliance reporting through the Wide Area Workflow and Defense Logistics Agency systems, ensuring full adherence to federal acquisition regulations. The work involves managing end-to-end documentation processes to meet government standards for financial transparency, delivery verification, and regulatory reporting, specifically tied to defense procurement activities. Performance is centered at New Cumberland, Pennsylvania, with the contract classified as a subcontract under NAICS code 541611 for management consulting services. The solicitation was posted on July 20, 2026, and responses must be submitted by July 31, 2026, under the auspices of the Department of Defense’s Nuclear Reactor Program, which oversees mission-critical infrastructure and compliance protocols. All deliverables must align with DLA and WAWF technical specifications and maintain strict data integrity for federal auditing purposes.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details