Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BRAKE, BASE

Active
SPE7LX-26-U-8900Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 21 units of BRAKE, BASE with NSN 3040-01-165-4444 under solicitation SPE7LX-26-U-8900, a total small business set-aside classified under NAICS code 333613. The delivery is due within 99 days after contract award, with responses due by August 5, 2026. The specification incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The product must not contain any Class I ozone-depleting chemicals, and any substitutions require prior approval unless explicitly authorized by the specification. Inspection and acceptance are to occur at origin, and configuration changes must be managed through an Engineering Change Proposal with formal request for variance if deviations are necessary. Technical data associated with this item is subject to export controls under ITAR or EAR, with restrictions on disclosure to foreign persons both domestically and abroad, requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires. The contracting office is the Strategic Acquisition Program Directorate within the Department of Defense, with Theodore Misiolek as the primary point of contact.

General Info

21 brake units under small business set-aside, delivery in 99 days, ITAR/EAR controlled, DLA standards apply.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUS
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRAKE,BASE
BRAKE,BASE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint
SPE7LX-26-U-8900
SECTION B
Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3040-01-165-4444 Quantity: 21 EA Purchase Request: 1000237686QTY: 21 Delivery: 99 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333613
New
DIBBS
CASING, FLEXIBLE SHAThe contract pertains to the procurement of a flexible shaft casing assembly, identified by part number 10053603 and NSN 3040-01-525-0768, with a quantity of four units. The item is classified as a critical application item and is being procured under DLA Direct, CONUS coverage, with delivery required within 177 days FOB origin. The quantity is fixed with no variance allowed, and both inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard. All packaging and labeling must conform to MIL-STD-129, and palletization must adhere to the DLA Packaging Requirements for Procurement. The unit of issue is each, with a total contract value based on an estimated quantity, and the item is not guaranteed to be purchased by the IDC. The contract is issued under solicitation SPE7L3-26-U-0639, with a response deadline of August 5, 2026, and is classified under NAICS code 333613. The contracting office is the Department of Defense, Land Supplier Operations Vehicle Support, with Stephen Weaver as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
COLLAR, SHAFTThe contract is for the procurement of one collar, shaft with NSN 3040-01-658-5553 and part number 4325320 from OSHKOSH DEFENSE LLC, issued under solicitation SPE7L1-26-T-856M. The item must be delivered in a single unit within 121 days to the designated location in Albany, Georgia, under FOB origin terms, with no tolerance for quantity variance. All packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, while marking must adhere to MIL-STD-129 with no special marking codes required. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition size. Delivery must be directed to the DLA Distribution Management Office in Albany, Georgia, and the required delivery date is July 20, 2026, with a submission deadline for responses on August 3, 2026. The contract falls under NAICS code 333613 and is managed by the Department of Defense’s Land Supply Chain organization, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
BALL JOINTThe contract is for the procurement of a ball joint with NSN 3040-01-600-1867 and part number 2998K321 from McMaster-Carr Supply Co, under solicitation SPE7LX-26-U-8915, with a total quantity of 16 units at a unit price of $16.00, resulting in a total price of $256.00. The requirement is designated as a Total Small Business Set-Aside under NAICS code 333613, and delivery must be made within 49 days FOB origin with no tolerance for quantity variance. All items must be packaged and marked in strict compliance with MIL-STD-129 and ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence over any material standard. Inspection and acceptance occur at the destination point, and packaging must follow DLA’s Packaging Requirements for Procurement (RP001), including palletization standards. The U/I is EA and the QUP is specified as 001, meaning each unit pack contains one item. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. Primary point of contact is Theodore Misiolek, reachable via phone or email. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation issue date for simplified acquisitions. The item is covered under DLA Direct, CONUS, and the contract explicitly states that the estimated quantity may not be fully purchased by the IDC. All documentation and labeling must conform to the referenced standards and DLA directives without exception.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333613
New
DIBBS
CONNECTING LINK, RIGID
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
RING, ROD, PISTON
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
GEAR RACK
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHT
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
RACK, PISTON, ACTUATO
FLUID HANDLING DIVISION

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
BEARING SET, SLEEVEThe contract is for the procurement of 10 units of a Bearing Set, Sleeve identified by NSN 3120-00-765-4877 and part number 70690, available from two approved sources: Triumph Engine Control Systems, LLC (CAGE 11599) and Wencor Group, LLC (CAGE 26647, with alternate part number Z70690). The item is classified as a commercial item and designated as a critical application item, subject to stringent technical, quality, and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality standards, configuration change management, and inspection and acceptance at origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with each sleeve individually wrapped in neutral paper to prevent damage, and palletization adhering to DLA packaging mandates. Delivery is FOB origin within 20 days of contract award, with zero variance allowed in quantity, and inspection and acceptance occur at the manufacturing site. The item requires specific marking and is destined for 1inci Hava Bakim Fabrika Mudurlugu in Eskisehir, Turkey, via freight forwarder A.J. Worldwide Services. All requirements are governed by the DLA systems in effect on the solicitation issue date, and compliance with referenced quality assurance procedures, including QAP 13873 Revision B, is mandatory. The solicitation number is SPE4A6-26-T-08TU, with a response deadline of July 29, 2026, and an original required delivery date of July 24, 2026.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
BRACKET, MOUNTING
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, SHOULDERED
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333613
New
DIBBS
GEAR, DRIVE MOTION
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 326122
New
DIBBS
CLAMP, LOOPThis contract, identified by solicitation number SPE7LX-26-U-8911, is a Total Small Business Set-Aside for the procurement of CLAMP, LOOP with NSN 5340-01-611-4025 and part numbers 90531K and VT10592AA01-3HN from CUMMINS FILTRATION INC. and NORMA PENNSYLVANIA INC. DIV BREEZE respectively. The requirement, for 240 units at a unit price of $1 each, is designated as a DLA DIRECT, CONUS delivery with FOB ORIGIN terms and no quantity variance allowed. Delivery must be completed within 116 days, with inspection and acceptance occurring at the destination. Packaging must strictly comply with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. If the item is classified as hazardous under FED-STD-313, packaging must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is permitted, but all packaging and labeling must conform to MIL-STD-129. Palletization must adhere to RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT. The contract is part of a broader framework incorporating technical and quality specifications referenced through R and I numbers found on the DLA website. The solicitation, issued by the Department of Defense’s Strategic Acquisition Program Directorate, is closed to small businesses only and was posted on July 21, 2026, with responses due by August 5, 2026. The unit of issue is each (EA), and quantities are fixed with no allowance for adjustment. The point of contact for inquiries is Theodore Misiolek, with details provided for email and phone. The contract references a comprehensive set of DLA packaging and quality standards that must be met without exception, and all packaging must be marked and labeled in compliance with MIL-STD-129. While the quantity listed is an estimate, the buyer is not obligated to purchase the full amount, but any awarded contract must strictly follow the defined technical, packaging, and delivery protocols outlined. The NSN and part number are critical identifiers for compliance and logistics tracking, and suppliers must ensure all documentation aligns with the DLA’s eProcurement and unit of issue guidelines.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAINThis contract pertains to the procurement of six plain seals identified by NSN 5330-01-503-4930 under solicitation SPE7LX-26-U-8895, with a delivery requirement of 301 days after award. The item is subject to extensive technical, quality, and export control requirements as defined by the DLA Master List of Technical and Quality Requirements, which incorporate MIL-STD-1916 or ASQ H1331 for sampling unless otherwise specified, with zero non-conformances required in the sample lot unless explicitly stated otherwise. Critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are treated as major. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to prevent ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, weapon systems, or chemical reagents authorized by NAVSEA; where permitted, portable devices must include a second barrier of containment per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals, deviation requests, and source approval documentation, while inspection and acceptance may occur at origin, and all government identification must be removed from non-accepted items. Technical data associated with this contract is subject to export controls under ITAR or EAR, and access is restricted to DLA contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and been approved by DLA. All contractual obligations are governed by tailored higher-level quality requirements and specific documentation standards for verification and compliance.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
LEVER, LOCK-RELEASEThe contract pertains to the procurement of a Lever, Lock-Release with NSN 5340-01-453-2554 and part number A6210372, under solicitation SPE7LX-26-U-8896, issued by the Department of Defense’s Strategic Acquisition Program Directorate. A total quantity of 135 units is requested at a unit price of $135.00, for a total contract value of $18,225. Delivery is required within 65 days FOB origin, with no variance allowed in quantity. The item is covered under DLA Direct, CONUS terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s packaging requirements and MIL-STD-129 for marking and labeling, with non-hazardous material packaged per ASTM D3951 unless a higher-priority DLA Master List technical or quality requirement applies. Hazardous materials must follow TQ requirement IP025 per Fed-Std-313. The packaging must also adhere to the DLA Packaging Requirements for Procurement (RP001) and palletization standards. Identification of the item must conform to MIL-STD-130N for military property marking, and the contractor must ensure all government identification is removed from non-accepted supplies. The solicitation is open via DIBBS, and the contract is subject to the revision of the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. The primary point of contact is Theodore Misiolek, with response due by August 5, 2026.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
TREAD, METALLIC, NONSKIDThe contract is for the procurement of two units of metallic nonskid tread with the NSN 2540-01-593-9652 under solicitation SPE7LX-26-U-8910, designated as a Total Small Business Set-Aside. Delivery is required within 109 days after award, and responses must be submitted by August 5, 2026. The item is governed by DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions including tailored higher-level quality standards, configuration change management, inspection and acceptance at origin, and strict controls on government identification removal from non-accepted supplies. Only qualified manufacturers listed on approved QPLs or QMLs may supply components, and the contract enforces compliance with MIL-STD-1916 or comparable zero-based sampling plans, assigning verification levels and AQLs according to criticality of attributes. Ozone-depleting chemicals are strictly prohibited, and substitute chemicals require prior approval unless explicitly permitted by specification. Technical data is subject to export controls under ITAR or EAR, restricted to contractors with approved JCP certification, completed DLA training, and authorized access. The contract mandates CMMC Level 2 certification for third-party assessors and requires phosphate coating suppliers to meet specific certification standards. The approved source of supply has been updated from Devcon Corp to ITW Polymers Adhesives North America for part numbers PK9500-3/2 and PK9500-3/2-7. The contracting office is the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 314910
New
DIBBS
BAG, CARTRIDGE CLIPThe contract is for the procurement of a neoprene-coated cloth cartridge clip, a critical gun part designated as a Category I munitions item under demilitarization requirements, with strict compliance mandated for technical specifications referenced in the DLA Master List of Technical and Quality Requirements. The item, identified by NSN 1005-01-182-4536 and part number 65751-03013-041, must conform to exact engineering drawings and revision standards, and the actual manufacturer must be formally identified and approved prior to award, with any subsequent changes requiring official contract modification. The product is subject to Product Verification Testing (PVT) before each shipment, requiring five samples from each subcontractor involved in production, one of which may be destroyed during testing, and all samples must be properly marked and traced to their source. Inspection and acceptance occur at the manufacturer’s facility under the Quality Assurance Representative, following zero-defect sampling criteria aligned with MIL-STD-1916 or comparable zero-based plans, with critical attributes held to the highest verification levels and specified AQLs. Packaging must adhere to MIL-STD-2073-1E and DLA requirements, including marking per MIL-STD-129, and no ozone-depleting chemicals are permitted under any circumstances. The contract is a total small business set-aside under NAICS code 314910, with a delivery window of 134 days, FOB origin, no quantity variance allowed, and a unit price of $5.00 for a total of five units.
Textile Bag and Canvas Mills

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP.This contract, identified as CLAMP, LOOP, is a solicitation under number SPE7LX-26-U-8888 issued by the Strategic Acquisition Program Directorate within the Department of Defense for the procurement of eight units of a specific clamp and loop component with NSN 5340-00-582-1474. The solicitation is a total small business set-aside under NAICS code 332510, with responses due by August 5, 2026, and an anticipated delivery deadline of 48 days after award. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, subject to any amendment updates. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific functional applications including batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary to prevent leakage, per NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and full compliance with these stipulations is mandatory for contract fulfillment.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract is for the procurement of three mounting brackets with NSN/Part Number 5340-01-693-6794 under solicitation SPE7LX-26-U-8898, with a delivery requirement of 81 days after contract award. The acquisition is structured as a Total Small Business Set-Aside under NAICS code 332510, indicating exclusive eligibility for small businesses. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons or entities without prior authorization from the Department of State or Commerce, including foreign national employees of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire, may access the controlled data. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
HOUSING ASSY, FEEDERThe item specified is a Housing Assembly, Feeder, manufactured via metal casting, requiring specialized tooling for production, with sourcing and technical support available through DLA’s Aviation, Land & Maritime Supply Chains. The procurement is governed by a comprehensive set of technical, quality, and compliance requirements including CMMC Level 2 certification for third-party assessors, tailored higher-level quality standards for manufacturers and non-manufacturers, and strict configuration change management protocols requiring formal engineering change proposals or variance requests. Inspection and acceptance must occur at origin, and non-accepted items must have all government identification removed. Physical identification of the bare item is mandated, and technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior Department of State or Commerce authorization, with DFARS 252.225-7048 fully applicable. Access to this controlled data is restricted to DLA contractors who hold JCP certification, have completed mandatory DOD export control training, and received formal approval from DLA. The solicitation, identified as SPE7LX-26-U-8906, is a total small business set-aside under NAICS code 332994, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Four units are required with a delivery deadline 186 days after award. The solicitation closed on August 5, 2026, with a posted date of July 21, 2026. Demilitarization requirements apply as this item falls under Category I Munitions List items per DoDM 4160.28-Vol. 3, and it is subject to DLA packaging standards and covered defense information protocols. All technical and quality specifications referenced must be drawn from the DLA Master List in effect on the solicitation issue date. The primary point of contact for inquiries is Theodore Misiolek of DLA, reachable via email or phone provided.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThis contract specifies the procurement of a power supply with NSN 6130-01-502-8006, quantity of six units, under solicitation SPE7LX-26-U-8892, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required FOB origin within 104 days with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to all DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging, MIL-STD-129 for marking and labeling, and PALLETIZATION standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated a critical application, and mercury or mercury-containing compounds are strictly prohibited except for specific exempted uses such as batteries, fluorescent lights, or instrumentation per NAVSEA guidance, with portable mercury-containing devices requiring shockproof design and secondary containment. All technical and quality requirements referenced by R or I numbers in the DLA Master List govern over general standards. The unit of issue is each, and the contract is issued under DLA Direct, CONUS coverage.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
CLEVIS, ROD ENDThe item specified is a CLEVIS, ROD END with NSN 5340-01-579-1843, for a quantity of 61 units, under purchase request 1000237681, with delivery required within 111 days after order. The procurement is conducted under solicitation SPE7LX-26-U-8901, issued on July 21, 2026, with responses due by August 5, 2026. This is a total small business set-aside under FAR 19.5, classified under NAICS code 332722, and managed by the Strategic Acquisition Program Directorate within the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item includes export-controlled technical data subject to ITAR or EAR, restricting disclosure or export to authorized parties only. Access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and authorized clearance via the DLA. DFARS 252.225-7048 governs the handling of this data, including restrictions on foreign nationals, even when employed by U.S. entities. Government identification must be removed from non-accepted supplies, and the primary point of contact for inquiries is Theodore Misiolek, reachable via email and phone.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327999
New
DIBBS
KNOBThis contract, identified as KNOB under solicitation number SPE7LX-26-U-8891, is a total small business set-aside for the procurement of 68 units of a knob with NSN 5355-01-382-5286, requiring delivery within 88 days after award. The contract incorporates stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date. Zero-tolerance policies are enforced for hazardous materials: ozone-depleting chemicals are completely prohibited, and mercury or mercury-containing compounds are banned unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. All items must be asbestos-free, and any substitutions require formal approval under clause L30 and provision 4 conditions. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract explicitly prohibits the use of government identification on non-accepted supplies and mandates full and open competition under a small business set-aside, with Theodore Misiolek designated as the primary point of contact for inquiries.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details