Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Brand Name Only Agilent Gas Chromatograph OpenLab CDS Software and Workstations

Active
1333ND26QNB640565Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation 1333ND26QNB640565 is a Request for Quotation issued by the Department of Commerce NIST for the procurement of brand name only Agilent Gas Chromatograph OpenLab CDS Software and Workstations. This acquisition is a total small business set aside under NAICS code 334516. The contract requires a firm fixed price that includes warranty, installation, training, and FOB destination delivery. The award will be granted to the responsible quoter providing the lowest priced, technically acceptable quote. Technical acceptability is based on the ability to meet all brand name specifications, delivery within 90 days after receipt of order, and price reasonableness. Interested parties must have an active SAM.gov registration and submit their quotations via email to the contract specialist by 11:00 AM Eastern Time on September 9, 2026. All inquiries must be submitted in writing by September 2, 2026.

General Info

NIST seeks Agilent software and workstations via small business set aside by 9/9/2026.

Agency

Department Of Commerce NistView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

MD

Set-Aside

SBA

Documents

(4)

Requirements_Agilent+Software+Upgrade+Final.pdf

PDF

Provisions_Clauses+Agilent+Software.pdf

PDF

1333ND26QNB640565+RFQ.pdf

PDF

RFQ+BN+Agilent+Software.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Commerce Nist
Contacts1 person available
OfficeGAITHERSBURG, MD, 20899, USA
Organization / Agency
Department Of Commerce Nist
View Agency Profile
Office AddressGAITHERSBURG, MD, 20899, USA
Contacts

Full Description

Show more

(I) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in part 12 - Acquisition of Commercial Products and Commercial Services as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.



(II) The solicitation number is 1333ND26QNB640565 and this solicitation is a Request for Quotation (RFQ). This acquisition is being solicited as total small business set aside.



(III) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2026-01 dated March 13, 2026, and the Revolutionary FAR Overhaul (RFO) as updated through August 29, 2026, supplemented by Department of Commerce Acquisition Policy. 



(IV) The associated North American Industry Classification System (NAICS) code for this procurement is 334516 – Analytical Laboratory Equipment Manufacturing with a small business size standard of 1,000 employees.



(V)  All quoters shall provide a firm fixed price quotation for the following line item(s):



Contract Line Item Number (CLIN)


TOTAL


Brand Name Only Agilent Gas Chromatograph OpenLab CDS Software and Workstations (inclusive of warranty, FOB Destination delivery, installation, and training) in accordance with the attached NIST Requirements Document.



TOTAL:





(VI) The requirements for the line items to be acquired above are in the attached Requirements Document.



(VII) Date(s) and place(s) of delivery and acceptance and FOB point are required in accordance with the attached Requirements Document.



(VIII) Quoters/Contractors must possess an ACTIVE registration in the System for Award Management system, www.SAM.gov, when submitting a quotation and shall continue to be registered until time of award, during performance, and through final payment of any contract resulting from this solicitation. The Contracting Officer shall confirm that quoters have an “active” registration at the www.sam.gov website upon receipt of the quotation. If the SAM.gov registration is not active, the quotation will not be considered for award. Note that “ID Assigned” is not “Active.”



(IX) The provision at FAR 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services (DEVIATION Jan 2026), applies to this acquisition. See Addendum to FAR 52.212-1 below.



Addendum to FAR 52.212-1, Instructions to Offerors – Commercial Products and Commercial Services (DEVIATION Jan 2026):


DUE DATE FOR QUOTATIONS


Quoters shall submit their electronic quotations, via email, so that NIST receives them not later than 11:00 AM Eastern Time on September 9, 2026. E-mail quotations shall be submitted directly to the Contract Specialist at laure.roller@nist.gov.



Please reference the RFQ number in the subject line of all email communications. Quotations which do not reference the RFQ number in the subject line may not be considered. Quotations shall not be deemed received by the Government until the quotation is received in the e-mail inbox set forth above.



INQUIRIES:


Quoters must submit all questions concerning this solicitation in writing to both the Contract Specialist Ms. Lauren Roller at lauren.roller@nist.gov. Questions should be received no later than September 2, 2026. All responses to timely submitted questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the responses included in the amendment to the solicitation will be deemed as the Government’s formal response and govern performance of the contract.



Quotation Preparation Instructions:



All quotations shall conform to solicitation provisions/clauses and be prepared in accordance with this section. The quotation shall be clearly and concisely written as well as be neat and logically assembled. All pages of the quotation shall be appropriately numbered.



The Quoter’s quotation shall be clearly divided into the following distinct volumes:



Volume I – Technical Quotation


Volume II – Price Quotation


Volume III- Terms and Conditions



Volume I - Technical Quotation:



The Quoter shall submit one (1) copy of their technical quotation, electronically, via E-mail to the Contract Specialist identified above. The technical quotation shall address the following:



Technical Capability:


  1. Technical description and/or product literature.  Quoters shall include the manufacturer, make and model of the product, manufacturer sales literature, or other product literature that CLEARLY DOCUMENTS that the quoted products meet all BRAND NAME ONLY specifications outlined in the Requirements Document. The quoter is responsible for ensuring the submitted documentation clearly addresses all specifications and requirements.
     
  2. Country of origin of all manufactured end products quoted
     
  3. Confirmation of the quoter’s ability to meet the required delivery terms.
     
  4. Confirmation of the quoter’s ability to meet warranty requirements.


Volume II - Price Quotation:



The quoter shall submit one (1) copy of their entire quotation, electronically, via E-mail to the Contract Specialist identified above. The price quotation shall address, at minimum, the following information.



  1. The solicitation number
     
  2. The name, phone number, and email address of the quoter's/contractor’s point of contact;
     
  3. Unique Entity Identifier # for quoter's/contractor’s active SAM.Gov registration.
     
  4. A firm fixed price for each required line item, including a unit price and total amount where applicable, and the aggregate quoted firm fixed price for the requirement.
     
  5. Shipping and Delivery costs must be included in the quotation either as a separate line item or contained in the total price of the quote. The quotation shall include a total firm fixed price for the requirement that includes all shipping/delivery costs.
     
  6. Any applicable discount terms.


Volume III – Terms and Conditions:



The quoter shall review the provision and clauses attachment and complete any required information as record via a separate volume response to this solicitation.         



Note: System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in this solicitation. Contracting officers will rely on representations from offers based on provisions in the solicitation. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.



Acceptance of Terms and Conditions:


If the contractor objects to any of the terms and conditions contained in this solicitation, the contractor shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the contractor to identify in their quotation any exceptions to the terms and conditions of the solicitation. If the contractor does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Contractor's acceptance of the Government's terms and conditions for inclusion into the resultant purchase order (PO). 



Note: This procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If a quoter submits a quotation based upon an FSS or GWAC contract, the Government will accept the proposed price. However, the terms and conditions stated herein will be included in any resultant purchase order, not the terms and conditions of the Quoter’s FSS or GWAC contract, and the statement required above shall be included in the quotation.   




FAR 52.212-2 Evaluation- Commercial Products and Commercial Services (DEVIATION Jan 2026)



  1. Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:


The Government intends to award a single purchase order (PO) from this solicitation utilizing simplified acquisitions procedures in accordance with FAR part 12 of the Revolutionary FAR Overhaul. The Government reserves the right not to award a PO or to make an award without discussions based solely upon initial quotes.



Basis for Award: 



Award will be made to the responsible quoter whose quotation, conforming to the solicitation, is the lowest priced, technically acceptable quote.



A quoter's failure to address any factor may be considered indicative of the quoter's lack of understanding of the Government's requirements and may result in the offer being determined unacceptable.



Evaluation Factors:



A quotation will be determined technically acceptable if it meets the following criteria:
 


(1) Technical Capability: The Quoter must indicate in its quotation the ability to provide all minimum BRAND NAME ONLY requirements identified in the Requirements Document, inclusive of warranty, installation, and training requirements.



(2) Schedule: The Quoter must indicate in its quotation the ability to meet the delivery requirements within 90 days ARO. Additionally, delivery must be on a F.O.B Destination basis and inclusive of all delivery costs, including any potential tariffs.
 


(3) Price: The quoted price will be evaluated. The evaluation will determine whether the proposed prices are reasonable in relation to the solicitation requirements. Prices must be entirely compatible with the technical portion of the quotation.



(b) Options (if applicable). The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).
 


(c) Notice of award. A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.
 


(End of provision)


Similar Contracts

Same NAICS industry code

NAICS: 334516
New
Federal
Repair and Installation services for the Heat Exchanger System on a Bruker 9.4 Tesla Magnetic Resonance Imaging (MRI) system
Solicitation # 75N98026Q00967
The National Institutes of Health, National Institute on Drug Abuse’s Intramural Research Program is conducting market research to identify qualified sources capable of providing emergency repair parts and installation services for the Triple-loop Heat Exchanger System on its Bruker 9.4 Tesla Magnetic Resonance Imaging scanner, which has failed and requires immediate replacement to prevent catastrophic magnet quenching. The requirement specifies a brand-name or equal heat exchanger that must interface seamlessly with the existing scanner software, building water supply, magnet cryomech, gradient, and shim coil cooling systems while ensuring stable cryomech operation and maintaining magnet pressure at 1040 mbar. All components must be new, unused, original equipment manufacturer parts authorized by Bruker Corporation, and installation must be performed exclusively by Bruker-certified technicians to preserve the MRI system’s existing warranty. The contractor must deliver and install the system within three months of order receipt, with a one-year warranty covering all parts, labor, travel, and including one preventative maintenance visit. Responses to this sources-sought notice must be submitted electronically by August 12, 2026, and must include detailed capability statements addressing each technical requirement separately, with supporting documentation on company size status under NAICS Code 334516, employee count, personnel qualifications, relevant government contracts, and complete contact and SAM.gov registration information including UEI and TIN. The notice explicitly states that no award will result from this action and that responses are not proposals or quotations. Companies must identify the place of manufacturing and confirm compliance with the Non-Manufacturer Rule if applicable. Proprietary or sensitive data should not be included, though any claimed proprietary information will be safeguarded. Responses are limited to ten pages excluding cover page and references, must reference solicitation number 75N98026Q00967SB, and be sent exclusively to Josh Lazarus at josh.lazarus@nih.gov. All respondents must have an active SAM.gov registration, and while small businesses are strongly encouraged to respond, the government retains full discretion on whether to pursue a competitive or non-competitive acquisition path based on the feedback received.
National Institutes Of Health Nida

POSTED

about 16 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334516
New
Federal
6640--Clinical Laboratory Microbiological System - Instruments, Reagents, & Supplies
Solicitation # 36C26126Q1007
The Department of Veterans Affairs, through the Network Contracting Office 21 at VA Palo Alto Health Care System, is conducting market research to identify qualified vendors capable of supplying clinical laboratory microbiological instruments, reagents, and supplies in compliance with FDA regulations. This sources sought notice aims to assess industry capacity, determine the availability of small and socioeconomically disadvantaged businesses, and inform acquisition strategy under NAICS code 334516 for analytical laboratory instrument manufacturing. Vendors must submit a brief statement of capability, including past experience providing similar systems to federal, state, or private entities, along with details on business size, socioeconomic certifications such as SDVOSB, VOSB, 8(a), or small disadvantaged status, UEI number, SAM and DSBS registration status, and evidence of GSA Federal Supply Schedule contracts if applicable. Commercial pricing, current customer references, and relevant credentials must be included, with all submissions required to be received by 10:00 AM Mountain Time on July 31, 2026, via email to designated VA contracting personnel. This effort is non-binding and does not obligate the government to proceed with procurement or issue a solicitation. Responses are not considered offers and will not be compensated. Any proprietary information must be clearly marked, and the government will not incur administrative costs in relation to this effort. A formal solicitation may follow, with potential future procurement expected to be conducted via GSA eBuy if leveraging existing GSA Schedule contracts proves viable.
261-NETWORK Contract Office 21 (36C261)

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Commerce Nist

Same awarding agency

NAICS: 513210
New
Federal
Open RAN Cellular End-to-End System Software and Support
Solicitation # NB675030-26-02022
The National Institute of Standards and Technology (NIST) is conducting market research through a Sources Sought announcement to identify qualified vendors capable of providing an Open RAN Cellular End-to-End System software with associated support services, as outlined in the attached draft Specifications. This is not a Request for Quotation and does not obligate the government to award a contract; it is solely intended to assess industry capabilities and determine potential small business set-aside opportunities. Vendors must submit a capability statement of five pages or less, including company profile details such as number of employees, office locations, Unique Entity Identifier (UEI), and CAGE Code, along with the name of the entity providing and manufacturing the product and its country of origin. Responses must also include specification sheets and product examples demonstrating compliance with the requirements, typical lead time for delivery including installation and training, and verification of small business status under NAICS code 513210, which has a $47 million size standard. All responses must come from responsible sources, including small businesses (SB, SDB, WOSB, HUBZone, SDVOSB, VOSB) and large businesses, with the government considering all small business set-aside categories. To be eligible for any future award, vendors must possess an active UEI registration on SAM.gov and hold a valid Export Control Classification Number (ECCN). The product must deliver Radio Intelligence (RIC) capability in the 78 GHz band and include an MX-PDK 3-Node Software License with integrated components such as MX-5G, MX-RIC, MX-DATA, and Open RAN Studio emulation, plus a three-year Hosted DevOps and Application Support Management service covering technical support, updates, and a ticketing system. Installation requires 40 hours of onsite work via Microsoft Teams, with training delivered virtually and including operation, maintenance, troubleshooting, and safety. The software, manuals, and license keys must be delivered electronically to azizollah.kord@nist.gov, while physical delivery of hardware and related materials must be made to NIST-Boulder, Boulder, CO. Delivery must occur within three months of award, and warranty coverage must include labor, parts, travel, and return liability for a three-year period with response times within five business days. Acceptance is expected within seven business days following functional testing and KPI verification. No compensation is provided for submissions, and marketing materials are expressly excluded from consideration.
Software Publishers

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 238210
New
Federal
Large-Tier Electrical Construction IDIQ
Solicitation # DRAFT--1333ND26RNB190031
This solicitation is a draft for a Large-Tier Electrical Construction Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract issued by the National Institute of Standards and Technology (NIST) under the Department of Commerce. The solicitation number is DRAFT–1333ND26RNB190031, posted on August 3, 2026, with a response deadline of September 1, 2026. The work is focused on electrical construction services, with the initial task order targeting the installation, testing, and commissioning of fire alarm and electrical systems in Building 225 located in Gaithersburg, Maryland. Contractors must comply with NIST-specific standards, NFPA 70, NFPA 70E, OSHA regulations, and other referenced codes for safety, installation, and system performance. The contract has a minimum order value of $5,000 and a maximum ceiling of $73,788,828, with performance periods tied to Notice to Proceed issuance and extending up to 396 days per task order. Award will be determined through a trade-off process, with the highest technically rated proposals selected if they offer a fair and reasonable price. Evaluation factors include bonding capacity (mandatory pass/fail with a minimum of 20% of the first task order or $3 million), technical capability (assessed via oral presentation and management plan), past performance (evaluated through CPARS and related sources), price reasonableness (reviewed only after technical qualification), and subcontracting plan compliance (pass/fail for non-small businesses). Security requirements are stringent, mandating NACI or SAC clearances, PIV/FAC badging, HSPD-12 compliance, and restrictions on foreign national access, all requiring advanced approval and documentation. All submissions must be electronic, sent via email to designated NIST contacts, formatted in specific file types (PDF, DOCX, PPTX, XLSX), and adhere to strict page and size limits. Attachments include facility drawings, fire protection specifications, safety protocols, wage determinations, and operational guidelines, with packaging and labeling required to meet MIL-STD-129 and ANSI/UL standards. Invoicing must be processed through the IPP system, and all contractors must provide UEI and CAGE codes, represent their small business status, and comply with OCI prohibitions and key personnel reporting requirements.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334515
New
Federal
Water Bath for Microcalorimeters
Solicitation # NB6720102601981
The U.S. Department of Commerce, National Institute of Standards and Technology (NIST), is seeking information from industry providers regarding the availability and capability of suppliers to deliver a temperature-controlled water bath for microcalorimeters at its Boulder, Colorado facility. This notice, identified as NB672010-26-01981, is a sources sought action aimed at gathering market intelligence to inform a future procurement strategy and is not a solicitation, obligation, or commitment to award a contract. The required equipment is for use in RF power calibrations and must meet draft specifications detailing a water bath with precise temperature regulation via heaters and refrigeration, along with stirring mechanisms to ensure uniformity. Responses are due by July 16, 2026, and must be submitted in Microsoft Word or PDF format with a ten-page limit excluding a cover page and commercial pricing data, to lia.arthofer@nist.gov. Respondents are required to provide their Unique Entity ID, company details, validation of small business status under NAICS 334515, SAM.gov registration status, and their ability to comply with FAR clause 52.219-14 if the acquisition is set aside for small businesses. Industry input is also requested on potential improvements to the draft specifications, proposed evaluation factors for future competitions, and standard commercial pricing information to assist in estimating fair market value. Any estimates for the requirement may be included, but formal quotations are strictly prohibited. Tying arrangements must include all team members’ information, and responses are considered voluntary with no obligation for NIST to provide feedback or compensation. NIST may use all submitted data to determine if a solicitation will be issued via SAM.gov or GSA eBuy, and late submissions will not be considered for market research purposes.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

1 day ago

DEADLINE

in 7 days
View Details