This Solicitation opportunity from Department Of Veterans Affairs was posted on September 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Brand Name or Equal - BelAir Centrifugal Disc Finishing Machine, Water Treatment and Loop Waste Water Treatment Systems

Closed

36C24626Q0983_1Federal

Submission Closed09/14/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333517

New

Federal

3417--VR&E Laser equipment acquisition for Veteran

Solicitation # 36C10D26Q0211

The Department of Veterans Affairs, Veterans Benefits Administration, is soliciting quotes for the acquisition of a core capital equipment package to support a Veteran's self-employment plan under Chapter 31 Vocational Rehabilitation and Employment. The required equipment includes a 60W CO2 Galvo Laser System, a 100W Fiber MOPA Galvo Laser System, a 10W UV Galvo Laser System, a 60W CO2 Gantry Laser System, an industrial water chiller, and a rotary attachment set. All laser systems must comply with FDA regulations 21 CFR 1040.10 and 1040.11 and carry electrical safety listings from a nationally recognized testing laboratory such as UL or ETL. This is a total small business set-aside procurement evaluated on a best-value basis, where technical capability is significantly more important than price and past performance. A critical requirement is that the vendor must perform the delivery, placement, and on-site inspection at the Veteran's residence in Oregon City, Oregon, as third-party common carrier delivery without vendor presence is not acceptable. All items must be delivered within 45 calendar days of award. Quotes are due by November 4, 2026, and must be submitted in four volumes covering technical specifications, the completed SF1449, and past performance references.

Veterans Benefits Administration (36C10D)

POSTED

DEADLINE

Solicitation # RFQ511741

Oak Ridge National Laboratory, managed by UT-Battelle for the Department of Energy, is soliciting firm fixed price quotations under RFQ511741 for a compact, high-speed machining system, specifically a Datron Neo or a domestic equivalent. The required system must feature a 2kW 40,000rpm high-frequency spindle, a 24-tool automatic changer, touchscreen-based controls with 3D simulation, an integrated camera, and a touch probe. The scope of work encompasses the delivery, installation, startup assistance, and basic operator training at the Oak Ridge, Tennessee site. Award will be determined based on the Lowest Priced, Technically Acceptable (LPTA) proposal. The procurement is subject to rigorous federal and institutional requirements, including NIST SP 800-171 cybersecurity standards, Buy American Act compliance for supplies exceeding 15,000 dollars, and DOE-STD-1090-2020 for hoisting and rigging. Offerors must submit a firm fixed price quotation, a proposed delivery schedule, and completed abbreviated representations and certifications. Payment terms are Net 30 days via Electronic Funds Transfer, with invoicing processed through the Ariba network. The final response deadline, as extended by Amendment 3, is November 6, 2026, at 3:00 PM EST.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Supply of Arbor Press Fixtures (NSN 3465013246461)This subcontract involves the manufacture or sourcing of two Arbor Press Fixtures identified by NSN 3465013246461 for prime contractors working on Department of Defense projects. Managed by the Defense Logistics Agency, the contract requires strict adherence to ASTM D3951 packaging standards and MIL-STD-129 marking and labeling requirements. All deliverables must be shipped FOB Origin to Fort Hood. The contractor is obligated to comply with the Buy American Act and the Trade Agreements Act regarding domestic material disclosures. The project falls under NAICS code 333517, with a response deadline set for November 9, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Rotary Driven Drilling Machine ManufacturerThis subcontract involves the manufacture and supply of three rotary driven drilling machines for prime contractors supporting Department of Defense DLA supply contracts. The contractor is responsible for the fabrication and assembly of machinery in strict accordance with NSN 3820016288725 and DLA Master List RA001. All deliverables must adhere to MIL-STD-129 for marking and labeling, as well as ASTM D3951 and RP001 for packaging standards. The agreement mandates strict adherence to the Buy American Act and requires the contractor to maintain NIST SP 800-171 cybersecurity compliance. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333517. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Grinding and Buffing Materials (NSN 3415014366285)This subcontract involves the procurement of specialized grinding and buffing materials, specifically abrasive material identified by NSN 3415014366285, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work requires the sourcing or manufacture of one unit of material, which must be packaged according to RP001 and MIL-STD-2073-1E standards and marked in compliance with MIL-STD-129. The contractor must adhere to strict regulatory requirements, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 cybersecurity standards. This effort falls under NAICS code 333517 and is managed by the Department of Defense. The performance location is designated as FPO 96660, with a response deadline set for November 9, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0468

Solicitation SPE8E6-27-T-0468, issued by the Defense Logistics Agency Troop Support Construction and Equipment office, is for the procurement of one unit of grinding and buffing materials under NSN 3415-01-436-6285. The requirement is designated for delivery to the USS AMERICA LHA 6 at FPO AP 96660 with a required delivery date of July 3, 2025, and a delivery window of 20 days after award. The contract specifies FOB Origin terms, with inspection and acceptance occurring at the destination per FAR 52.246-1. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements for procurement. Key restrictions include a prohibition on the intentional addition of mercury and compliance with the Buy American Act and Berry Amendment. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and adherence to DFARS cybersecurity reporting standards for covered defense information. All quotes must be submitted via the DLA Internet Bid Board System.

Defense Logistics Agency

POSTED

DEADLINE

Large Format Wire EDM System ProviderThis subcontract involves the supply and installation of a high-precision, large-format Wire Electrical Discharge Machining system for prime contractors supporting Lawrence Berkeley National Laboratory projects. The required system must feature 800mm x 600mm x 800mm travel, a workpiece capacity of 3,000 kg, and full-height submerged cutting capabilities with automatic wire threading. The provider is responsible for delivering a fully commissioned and certified system that meets NRTL certification and complies with NFPA 79 and UL 508A standards. This opportunity is associated with NAICS code 333517 and is managed under the Department of Energy via a Berkeley National Lab contractor, with performance located in the 94720 zip code area.

Berkeley National Labor - DOE Contractor

POSTED

DEADLINE

Large Format Wire Electrical Discharge Machining (EDM) System

Solicitation # KT-2026-03

The Lawrence Berkeley National Laboratory (LBNL) is conducting market research via solicitation KT-2026-03 to identify qualified sources for a Large Format Wire Electrical Discharge Machining (EDM) System. This system will support the Engineering Division in providing high-precision, non-contact machining for complex scientific components, including accelerator structures, detector chassis, and superconducting magnet components. Preliminary technical requirements specify nominal travel targets of approximately 800 mm X, 600 mm Y, and 800 mm Z. The system must adhere to U.S. safety standards, specifically NFPA 79 and UL 508A, with certification from an OSHA-recognized Nationally Recognized Testing Laboratory such as UL, CSA, TÜV, or ETL. This effort is currently a Request for Information (RFI) and not a formal solicitation for proposals; therefore, no subcontracts will be awarded from this specific notice. The primary objective is to establish a list of qualified sources for a future Request for Quotes (RFQ) phase. Interested respondents must submit a completed response form by November 18, 2026, detailing their company information, system capabilities, and lead times. Additionally, LBNL requires the provider to have a West Coast field service organization to support the equipment in Berkeley, California. Respondents must certify their small business status under NAICS 333517 and ensure that no export-controlled or security-sensitive data is included in their submission.

Berkeley National Labor - DOE Contractor

POSTED

DEADLINE

Utility Grinding and Buffing Machine SupplierThis subcontract through the Defense Logistics Agency requires the procurement of one Utility Grinding and Buffing Machine for prime contractors supporting DLA Troop Support. The supplier must manufacture or source hardware that adheres to NSN 3415-01-212-6468 specifications, ensuring that no mercury is intentionally added to the equipment. All deliverables must comply with the Buy American Act and defense telecommunications prohibitions, with packaging and marking performed according to RP001, MIL-STD-2073-1E, and MIL-STD-129 standards. The operational machine is to be delivered to Tyndall Air Force Base in Florida. Interested parties should note that the response deadline for this requirement is November 9, 2026, and the project falls under NAICS code 333517.

Defense Logistics Agency

POSTED

DEADLINE

GRINDING AND BUFFING M

Solicitation # SPE8E6-27-T-0383

Solicitation SPE8E6-27-T-0383 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one utility grinding and buffing machine, identified by NSN 3415-01-212-6468. The requirement is for a single unit with a required delivery date of October 27, 2026, and a delivery lead time of five days after receipt of order. Shipping is established as FOB Origin under the First Destination Transportation program, with the final delivery destination being Tyndall AFB, Florida. Both inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality standards, including DLA packaging requirements RP001, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Special restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, such as the Buy American Act, prohibitions on covered defense telecommunications equipment, and safeguarding of covered defense information. The point of contact for this procurement is Jennifer Roome.

Defense Logistics Agency

POSTED

DEADLINE

GRINDING AND BUFFING M

Solicitation # SPE8E6-27-T-0234

Solicitation SPE8E6-27-T-0234 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of seven utility grinding and buffing machines, identified by NSN 3415013871119. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland Facility in Pennsylvania, with an original required delivery date of March 11, 2027, and a need ship date of April 12, 2027. The procurement falls under NAICS code 333517 and requires submission via the DIBBS system. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Contractors must comply with various federal regulations, including the Buy American Act, DFARS 252.204-7012 for safeguarding covered defense information, and the use of the Wide Area WorkFlow system for electronic invoicing and payment requests.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Small CNC Wire EDM Machine SupplyThis subcontract involves the supply and delivery of a new Small CNC Wire Electrical Discharge Machining machine to support prime contractors on Department of the Air Force projects at the Arnold Engineering Development Complex. The required equipment must be manufactured with Fine Grain Dianite Casting, linear shaft motors, and linear glass scales across the X, Y, U, and V axes. Key integrated features include automatic wire threading, U-V taper cutting, and a comprehensive dielectric system equipped with a chiller and deionizer. The machine must adhere to NFPA 79 standards and be delivered fully functional FOB to Arnold Air Force Base, Tennessee. This procurement is managed by the Department of Defense under the FA9101 AEDC Procurement Branch, with a response deadline of November 2, 2026.

FA9101 Aedc Pkp Procrmnt Branch

POSTED

3 days ago

DEADLINE

in 4 days

AI Contract Overview

The Department of Veterans Affairs, through Network Contracting Office 6, is soliciting a firm fixed price contract for the procurement of a BelAir Centrifugal Disc Finishing Machine, or an equivalent, for the Central Virginia Health Care Center in Richmond, Virginia. The equipment, which includes a closed loop waste water treatment system and a media storage rack, will be utilized to polish 3D printed parts for assistive technology devices for Veterans and VA employees. The scope of work extends beyond equipment delivery to include the development of polishing recipes for various polymer and metal parts, a one-day onsite installation, and a one-year manufacturer parts warranty. The solicitation, identified as 36C24626Q0983_1, is open to small businesses and women-owned small businesses, with a specific size standard of 500 employees for service-disabled veteran-owned small businesses. Award decisions will be based on the most advantageous combination of price and technical capability, with a requirement that offerors be registered in the System for Award Management. The period of performance begins on September 15, 2026, and the contract includes specific requirements for electronic invoicing through the VA Financial Service Center and adherence to trade agreement certifications.

General Info

VA seeks bids for a centrifugal disc finisher machine by September 14, 2026.

Agency

Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

NAICS

333517 - Machine Tool Manufacturing

Place of Performance

Richmond, VA, 23249, USA

Set-Aside

NONE

Documents

3C2C4626C00983 - BelAir Centrifugal Disk Finisher

rfq

High

VA69D-14-Q-0161 Centrifugal Disc Finishing Machine Line Items

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 10

Solicitation

Response DeadlineSep 14

Deadline has passed

Submission Closed

09/14/2026, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

Contacts1 person available

OfficeHAMPTON, VA, 23667, USA

Organization / AgencyDepartment Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

Office AddressHAMPTON, VA, 23667, USA

Contacts

Tiara White

contact@example.gov

+1 (555) 000-0000

Full Description

Brand Name or Equal Bel Air Centrifugal Disc Finisher Machine, Media Storage Rack, Centrifugal Water Treatment System and Closed Loop Waste Water Treatment System for the Central Virginia Health Care Center.