Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Brine Application System - Nurse Tank Fabrication

Open

State & Local

Response Deadline12/01/2026, 02:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and supply of 140 Brine Nurse Tanks for prime contractors working on North Carolina Department of Transportation roadway projects. The scope of work includes the manufacture of liquid storage tanks compatible with brine solutions, the installation of pumping and transfer systems for refilling application units, and the application of necessary safety labeling and corrosion protection in accordance with ASME, UL, or American Gas Association standards. The project falls under NAICS code 333220 and is managed by the North Carolina Department of Transportation. Interested parties must note the response deadline of December 1, 2026, for this procurement effort.

General Info

Agency

North Carolina → Department of Transportation

NAICS

333220 - Plastics and Rubber Industry Machinery Manufacturing

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 54-JB-1260007.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Brine Application System

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 10

subcontract

Response DeadlineDec 1

Submission deadline

Response Deadline

12/01/2026, 02:00:00 PM ESTin 21 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNorth Carolina → Department of Transportation

ContactsNo contacts available

OfficeN/A

Organization / AgencyNorth Carolina → Department of Transportation

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies nurse tanks for prime contractors on NCDOT roadway projects. Fabricates liquid storage tanks compatible with brine solutions and installs pumping and transfer systems to refill application units. Applies corrosion protection and safety labeling from ASME, UL, or American Gas Association. Delivers 140 completed Brine Nurse Tanks.

Similar Contracts

Same NAICS industry code

Valve Parts Kit SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, requires the procurement or manufacture of Valve Parts Kits specifically for NSN 4820017055888. The selected supplier will support prime contractors by providing completed kits delivered to the SWRMC MAC-MO facility in National City, California. All deliverables must adhere to strict military and federal standards, including preservation and packaging per MIL-STD-2073-1 Appendix D and the provision of Safety Data Sheets compliant with 29 CFR 1910.1200(g) and Federal Standard No. 313. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333220. Interested parties must submit their responses by November 16, 2026. Performance of the contract will take place in San Diego, California, ensuring the supply chain requirements for maritime valve components are met according to agency specifications.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Brass Pipe-to-Tube Elbows SupplyThis subcontract involves the manufacture and supply of 360 brass pipe-to-tube elbows for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The required components are 90-degree flow angle elbows featuring 1/4 inch O.D. male threaded tube sides and 1/8 inch nominal male NPTF pipe sides, each including a nut and sleeve in accordance with SAE Automotive Tube Fittings standards. Performance of the contract will take place in New Cumberland, Pennsylvania. All deliverables must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking requirements. The opportunity was posted on November 6, 2026, with a response deadline of November 16, 2026, under NAICS code 333220.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Industrial Wood Chipper/Chopper Equipment SupplierThis subcontract agreement establishes a partnership with an equipment supplier to provide a latest-model industrial wood chipper or chopper for prime contractors working on habitat management projects for the California Department of Fish and Wildlife. The supplier is responsible for delivering a current production model along with all necessary owner's manuals and equipment warranties. Key operational requirements include the coordination of pre-delivery inspections with State Auto Inspectors and the provision of essential documentation, specifically Line Set Tickets and Window Stickers. The solicitation was posted on November 4, 2026, with a response deadline of November 17, 2026, falling under NAICS code 333220.

California Department of Fish & Wildlife

POSTED

DEADLINE

Supply of Driving Axle Differential (NSN 2520-01-714-1294)This subcontract involves the supply of precision-manufactured Driving Axle Differentials (NSN 2520-01-714-1294) for prime contractors supporting US Army Detroit TACOM drivetrain projects. The work is managed under DLA Land Warren and falls under NAICS code 333220. The contractor is responsible for manufacturing units according to Top Drawing NR 12610748 and must provide both the physical differentials and all associated test reports. Strict technical compliance is required, including First Article Approval-Contractor Testing per Drawing 12718058 and Spec. A-A-52462. To execute the contract, the provider must possess precision gear cutting equipment and maintain CDAP compliance to meet Department of Defense standards.

DLA Land Warren

POSTED

DEADLINE

Supply of Differential Gear Unit (NSN 2520-01-714-1332)This subcontract with DLA Land Warren involves the supply of precision-manufactured Differential Gear Units (NSN 2520-01-714-1332) for prime contractors supporting US Army Detroit TACOM drivetrain projects. The contractor is responsible for manufacturing units in strict accordance with Top Drawing NR 12613236 and must successfully perform First Article Approval-Contractor Testing as specified in Drawing 12718059. To fulfill the requirements, the provider must utilize precision gear cutting equipment and maintain full compliance with Counterfeit Detection and Avoidance Program standards. Final deliverables include the completed gear units along with all necessary traceability documentation to ensure quality and authenticity.

DLA Land Warren

POSTED

DEADLINE

More opportunities from North Carolina → Department of Transportation

Same awarding agency

Field Assembly of Arched Aluminum Pipe StructuresThis subcontract involves the on-site assembly of fabricated aluminum pipe and headwalls for prime contractors working on North Carolina Department of Transportation projects. The scope of work requires the assembly of arched aluminum corrugated pipe and headwalls, with a specific focus on the correct installation of gaskets, hardware, and tieback rods. All work must be performed using rigging equipment and safety bracing in strict accordance with the plans provided by the Division Bridge Maintenance Engineer and the NCDOT 2024 Standard Specifications to deliver a fully assembled pipe structure. The solicitation for this project was posted on November 10, 2026, with a response deadline of November 23, 2026. Classified under NAICS code 238990, the contract is managed by the North Carolina Department of Transportation. Interested parties must ensure all technical requirements and safety standards are met to successfully fulfill the delivery of the assembled structures.

All Other Specialty Trade Contractors

POSTED

about 23 hours ago

DEADLINE

Heavy Haul Transport of Aluminum Pipe StructuresThis subcontract involves the heavy haul transport of oversized fabricated aluminum pipe and headwalls for prime contractors working on North Carolina Department of Transportation projects. The designated delivery location is SR-1143 Brick Landing Rd in Brunswick County, NC. The selected provider must utilize flatbed trailers and secure all necessary oversized load permits to ensure the safe delivery of materials to the site. Operational requirements include the management of waterproof shipping memorandums and precise labeling of all cargo. Deliveries are subject to strict scheduling constraints, with accepted windows occurring Monday through Thursday between 0700 and 1530. This opportunity falls under NAICS code 484220 and is managed by the North Carolina Department of Transportation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

Drainage Structure Hardware and Geogrid SupplyThis subcontract for the North Carolina Department of Transportation involves the supply of ancillary hardware and soil stabilization materials for drainage projects. The scope of work includes providing continuous flat gaskets, galvanized steel tieback rods with dead man anchor plates, anchors, lugs, inserts, adjustable turnbuckles, wale beams, caps, and Tensar TX Geogrid. All supplied materials must meet or exceed AASHTO requirements and be delivered directly to the project site or the fabricator. The solicitation was posted on November 10, 2026, with a response deadline of November 23, 2026. Classified under NAICS code 332722, this contract supports prime contractors in the execution of critical drainage infrastructure improvements across the state.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Arched Aluminum Corrugated Pipe and Structural Plate Headwall FabricationThis subcontract involves the fabrication of custom arched aluminum corrugated pipes and prefabricated aluminum structural plate headwalls for prime contractors working on North Carolina Department of Transportation projects. The scope of work includes the production of pipe runs measuring 117 by 79 inches and 95 by 67 inches, as well as headwalls measuring 11.25 by 36 feet. The contractor is responsible for performing all necessary welding on both the interior and exterior faces of the structures to ensure they are properly joined to the headwalls. To qualify for this contract, the provider must maintain NCDOT Approved Producer status and ensure all fabrications comply with 2024 Standard Specifications and AASHTO HL-93 loading requirements. The final deliverables must be fully inspected and stamped aluminum structures. Interested parties should note the response deadline of November 23, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

Heavy Equipment Hauling - North CarolinaThis subcontract involves the transportation and delivery of heavy brine application equipment for prime contractors working on North Carolina Department of Transportation projects. The selected provider will be responsible for hauling truck systems and trailers with a minimum gross vehicle weight rating of 44,000 lbs to Raleigh and various other locations across North Carolina. To ensure safety and compliance, the contractor must utilize heavy-duty flatbeds or lowboys and employ DOT-certified drivers who strictly adhere to NCDOT delivery protocols. The scope of work requires the successful delivery of 700 total units to designated sites. This opportunity falls under NAICS code 484220 and was posted on November 10, 2026, with a response deadline of December 1, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

Tandem Truck Brine System UpfittingThis subcontract involves the manufacture and installation of brine application systems onto tandem truck chassis for prime contractors working on North Carolina Department of Transportation roadway projects. The scope of work includes the design and installation of brine tanks, spray bars, and operator control systems, utilizing corrosion-resistant stainless steel mounts and fasteners to ensure durability. A total of 420 completed Tandem Truck Brine Systems are required for delivery. To ensure compliance and safety, all systems must feature safety labels from recognized authorities such as ASME, UL, or the American Gas Association. The project is categorized under NAICS code 336212 and is managed through the North Carolina Department of Transportation.

Truck Trailer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Brine Application System - Trailer FabricationThis subcontract involves the manufacture and assembly of 140 complete, self-contained trailer-mounted brine spray systems intended for prime contractors working on North Carolina Department of Transportation roadway projects. The scope of work includes fabricating trailer frames from 10-inch-wide steel I-beams, integrating the brine spray systems, and installing necessary safety chains and stainless steel fasteners. Each unit must meet a minimum Gross Vehicle Weight Rating of 44,000 lbs and feature safety labels compliant with ASME, UL, or American Gas Association standards. The project is categorized under NAICS code 336212, with a response deadline set for December 1, 2026.

Truck Trailer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Brine Application System

Solicitation # 54-JB-1260007

The North Carolina Department of Transportation is soliciting bids for an Agency Term Specific Contract to procure Brine Application Systems used for spreading large quantities of brine on roadways before predicted snow events. The procurement includes 140 trailer units, 140 nurse tanks, and 420 tandem truck systems. All equipment must be new, unused current models, with trailer-mounted units requiring a minimum GVWR of 44,000 pounds and a total width of 90-96 inches. Technical specifications mandate that trailer fasteners be stainless steel and safety chains be rated to meet or exceed the GVWR. All manufactured items must carry appropriate safety labels from organizations such as ASME, UL, or the American Gas Association and comply with OSHA and environmental pollution standards. Bids must be submitted electronically via the electronic Vendor Portal by December 1, 2026. The award will be based on the most advantageous value, considering factors such as completeness, cost, and promptness of delivery. Delivery is required within 90 calendar days of the purchase order on a Free-On-Board Destination basis to any requested location in North Carolina. Late deliveries are subject to liquidated damages of $67.60 per day, per unit. Vendors must be registered with the North Carolina Secretary of State and provide an eVP number. Invoicing is handled through single invoices sent to the Production Office Manager, with payment contingent upon inspection and acceptance of the goods.

Truck Trailer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Invitation for Bid #: 54-DM-41035

Solicitation # 54-DM-41035

The North Carolina Department of Transportation has issued Invitation for Bid 54-DM-41035 for a one-time purchase of Arched Aluminum Corrugated Pipe with Headwalls. The scope of work requires the vendor to provide all necessary materials, including hardware, wale beams, caps, gaskets, and tieback rods, ensuring all products are sourced from an approved producer. All structures must be designed to meet or exceed AASHTO material requirements, specifically AASHTO HL-93 loading, and comply with the 2024 Standard Specifications for Roads and Structures. Final acceptance is contingent upon the structures being inspected and stamped by an NCDOT Materials and Test inspector. The contract is awarded to the responsive bidder offering the lowest price. Vendors must fabricate the structures within 30 calendar days of receiving a purchase order and deliver them FOB Destination to specified locations in North Carolina, specifically targeting Brunswick County. Within five days of the award, the vendor must submit safety bracing plans to the Division Bridge Maintenance Engineer. Bids must be submitted electronically via the electronic Vendor Portal by November 23, 2026. Invoicing must follow a single invoice format per order, and vendors must adhere to strict marking and labeling requirements, including the use of waterproof shipping memorandums.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

Aluminum Pipe Hardware & Bands SupplyThis subcontract agreement involves the supply of aluminum hugger-type connecting bands and associated hardware for prime contractors working on North Carolina Department of Transportation road projects. The scope of work specifically covers the provision of bands for corrugated aluminum pipes with diameters of 24, 30, 36, and 48 inches. All delivered materials must strictly adhere to the NCDOT 2024 Standard Specifications for Roads and Structures. The solicitation was posted on November 4, 2026, with a response deadline of November 17, 2026, falling under NAICS code 331210.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Corrugated Aluminum Pipe SupplyThis subcontract involves the supply and delivery of corrugated aluminum pipe to prime contractors working on North Carolina Department of Transportation road projects. The scope of work includes the manufacture of pipes in diameters ranging from 15 to 48 inches, ensuring all products conform to AASHTO M219 and ASTM B746 standards. To qualify for this contract, the supplier must be approved on the NCDOT Producer/Supplier list and obtain necessary stamping from NCDOT Materials and Test inspectors. The solicitation was posted on November 4, 2026, with a response deadline of November 17, 2026.

Plate Work Manufacturing

POSTED

DEADLINE

Aluminum Structural Fabrication (Culverts and Plate Pipe)This subcontract involves the design and fabrication of custom aluminum structures, specifically box culverts, plate pipes, and headwalls, for prime contractors working on North Carolina Department of Transportation road projects. All products must be engineered to meet HL-93 loading and AASHTO material requirements, with all aluminum welding performed in accordance with the AWS D1.2 code. The selected provider is responsible for delivering fully assembled structures. To qualify, the fabricator must be approved on the NCDOT Producer/Supplier list and ensure all work receives NCDOT Materials and Test inspector stamping. This opportunity is categorized under NAICS code 332312, with a response deadline set for November 17, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS