Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Brushes, Paints, Sealers, and Adhesives

Active
DON-SNOTE-040805-003Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Sea Systems Command (NAVSEA) is in the process of drafting a revision to the MIL-PRF-24635C specification, specifically Amendment 1, which concerns enamel silicone alkyd copolymer coatings. This effort aims to develop flexible specifications that allow for various design approaches and manufacturing methods. The goal is to broaden the potential vendor base by creating inclusive standards. The draft document is currently available for public review and comment through the NAVSEA specifications and standards website under the government/industry review section. This posting is a notice rather than a solicitation and has been made available on both the Federal Business Opportunities (FBO) and the Navy Electronic Commerce Online (NECO) platforms to ensure accessibility. The associated contract involves products such as brushes, paints, sealers, and adhesives, with solicitation number DON-SNOTE-040805-003, posted in August 2004. Specific details regarding agency, location, NAICS codes, and points of contact are either not provided or unspecified in this notice.

General Info

NAVSEA revises MIL-PRF-24635C specs for flexible enamel silicone alkyd coatings; public review open.

Agency

N/A

NAICS

325510 - Paint and Coating Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyN/A
ContactsNo contacts available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
This synopsis is being posted to both the Federal Business Opportunities(FBO) page located at http://www.eps.gov and the Navy Electronic Commerce on Line(NECO) site located at http://www.neco.navy.mil. While it is understood that FBO is the single point of entry for posting of synopsis and solicitations to the internet, NECO is the alternative in case FBO is unavailable. Please feel free to use either site to access information posted by the Navy Sea Systems Command. The Naval Sea Systems Command (NAVSEA) is preparing draft MIL-PRF-24635C/Amendment 1, Enamel, Silicone Alkyd Copolymer. NAVSEA intends to draft specifications and standards to accommodate a variety of design solutions and processes, and to encourage a broad vender base. The draft document is posted on the following webpage for review and comment: http://www.navsea.navy.mil/specs&standards. Documents for review are under - Govt/Ind Review. THIS IS NOT A SOLICITATION.

Similar Contracts

Same NAICS industry code

NAICS: 325510
New
SLED
Supply of Coated Domestic Bolts and NutsThis subcontract with the Jefferson Parish Government in Louisiana involves the supply of domestic hex head and T-head bolts, as well as hex and heavy hex nuts, for prime contractors serving the Eastbank Warehouse Department. The required fasteners must be Grade #5, #A325, #A449, or #A242 Modified and feature a baked-on blue Teflon coating that adheres to ASTM B117 corrosion resistance standards. Specific deliverables include bolts designed for 36-inch butterfly valves, which must be delivered directly to the Eastbank Warehouse. The solicitation was posted on October 30, 2026, with a response deadline of November 10, 2026. Classified under NAICS code 325510, this opportunity focuses on providing specialized, coated hardware to support government supply contracts within the parish.
Jefferson Parish Government

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 325510
New
SLED
Athletic Paint
Solicitation # 63-DMP1213757
North Carolina State University is establishing a blanket order for athletic field paint, specifically for white and colored 1:1 ratio paints priced per gallon. The contract begins on February 4, 2027, and runs through February 3, 2028, with the university reserving the right to renew for four additional one-year periods, for a maximum total of five years. Orders will be placed on an as-needed basis, and the contract is awarded to the lowest responsible bidder based on price, quality, bidder capability, and compliance with specifications. A price-matching preference may be granted to qualified North Carolina resident bidders. Deliveries are set as FOB Destination with freight prepaid and included in the unit costs. Paint must be ready for use upon delivery, and vendors must offer the option of 275-gallon tote containers to reduce waste, ensuring all totes are full unless otherwise authorized. Bidders are required to provide an ingredient list for all supplied products and must adhere to safety standards from organizations such as UL, ASME, or NEMA where applicable. Payment terms are net 30 days following the receipt of a correct invoice or acceptance of goods. The university may also require a performance bond and commercial insurance from the successful bidder.
North Carolina State University

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 325510
New
SLED
Traffic Paint & Marking ConsumablesThis subcontract agreement focuses on the provision of industrial-grade traffic paints and reflective glass beads for prime contractors working on City of Beaumont procurement projects in Texas. The scope of work involves supplying bulk marking materials that adhere to municipal standards, specifically including Type 2 reflective glass beads and chlorinated rubber traffic paint in white, yellow, blue, and green, as well as Red Gorilla paint. The contract is categorized under NAICS code 325510 and requires the delivery of materials in bulk containers and bags. Interested parties should note the response deadline of November 19, 2026, for this procurement opportunity managed by the City of Beaumont.
City Of Beaumont

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 325510
New
DIBBS
Polyurethane Coating Material SupplierThis subcontract with the Defense Logistics Agency involves the supply of black two-component polyurethane coating touch-up pens, specifically NSN 8010015603448, for prime contractors. The requirement consists of one box of 24 pens delivered FOB Destination to Travis AFB. The supplier must adhere to strict packaging and marking standards including RP001, IP025, MIL-STD-2073-1E, and MIL-STD-129, while performing quality sampling according to MIL-STD-1916 or ASQ H1331. Additionally, the contractor is required to comply with DFARS 252.225-7001 Buy American standards.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 325510
New
DIBBS
Supplier of Electrical Insulating Varnish (NSN 5970-00-161-7232)This subcontract involves the supply of electrical insulating varnish meeting NSN 5970-00-161-7232 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected supplier is responsible for manufacturing or sourcing two gallons of warranted varnish, ensuring all deliveries include necessary SDS packages and OSHA labels. Performance takes place in Virginia Beach and requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging, utilizing U.N. IP.3 metal cans and U.N. certified 4G fiberboard boxes. To qualify, the supplier must hold SAE AS9003 or ISO 9001 certification and possess HMIC P shipping capabilities. The opportunity falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties must respond by November 6, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 325510
New
DIBBS
Supply of Temporary Paint (NSN 8010-01-706-8641)This subcontract, issued by the Department of Defense under the DLA DIST OKC KO CP, requires the procurement and supply of 30 temporary paint kits identified by NSN 8010-01-706-8641. These kits are intended for prime contractors supporting DLA Troop Support Construction and Equipment contracts. The selected provider must ensure all packaging adheres to MIL-STD-2073-1E and that shipments are marked according to MIL-STD-129. Due to the nature of the materials, hazardous materials handling certifications are mandatory for the supplier. The completed order must be delivered to Tinker AFB, Oklahoma, utilizing the fastest traceable shipping method available. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 325510. Interested parties must submit their responses by the deadline of November 4, 2026.
DLA DIST OKC KO CP

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 325510
New
DIBBS
PAINT, TEMPORARY
Solicitation # SPE8ES-27-T-0237
Solicitation SPE8ES-27-T-0237 is a request for the procurement of 30 kits of temporary paint, identified by NSN 8010-01-706-8641. The contract is issued by the DLA Troop Support Construction and Equipment office and is designated as a total small business set-aside under NAICS code 325510. The required delivery date is November 2, 2026, with delivery, inspection, and acceptance all occurring at the destination point of Tinker AFB, Oklahoma. Shipments must be made via the fastest traceable means, and the use of parcel post is strictly prohibited. The materials are classified as hazardous, requiring strict adherence to the Hazard Communication Standard 29 CFR 1910.1200, including the submission of Safety Data Sheets and specific labeling. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Additionally, the items are subject to a non-extendable 12-month shelf life. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and the safeguarding of covered defense information.
DLA DIST OKC KO CP

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 325510
New
DIBBS
LATCH, DOOR, VEHICULAR
Solicitation # SPE7L4-27-T-0709
This solicitation, issued by DLA Weapons Support LSO Combat Vehicles and Armament, is a small business set-aside for the procurement of one vehicular door latch assembly, specifically the rear right-hand assembly, under NSN 2540015696478. The required delivery date is November 3, 2026, with delivery terms set as FOB Destination Other, shipping to the NAVSUP Weapon Systems Support Joint Consolidation Point in Mechanicsburg, Pennsylvania. Quotations are due by November 9, 2026, and must be submitted to the issuing office in Columbus, Ohio. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It explicitly prohibits the use of Class I ozone-depleting chemicals and restricts the use of additive manufacturing unless specifically authorized. Compliance with the Buy American Act and DFARS cybersecurity standards, including safeguarding covered defense information, is required. Inspection and acceptance will take place at the point of origin, and electronic invoicing must be processed through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 325510
New
DIBBS
POLYURETHANE COATING
Solicitation # SPE8ES-27-T-0234
Solicitation SPE8ES-27-T-0234 is a procurement request by the Defense Logistics Agency for one kit of white polyurethane coating, identified by NSN 8010-01-692-1311. The material is designated as a critical application item with a 12-month extendable shelf life. Delivery is required within 10 days after receipt of the order, with a final required delivery date of November 2, 2026. The shipment is FOB Destination to the Central Receiving and Shipping Point at Fort Rucker, Alabama. The contract mandates strict quality and compliance standards, including supply chain traceability per DLA Directive C03 and sampling in accordance with MIL-STD-1916 or ASQ H1331. Because the material is hazardous, the contractor must adhere to IP025 for packaging and shipping, and ensure labeling complies with the Hazard Communication Standard and MIL-STD-129. Packaging must follow MIL-STD-2073-1E and RP001 requirements. Payment and invoicing are to be processed electronically via the Wide Area Workflow system. Key regulatory clauses include the Buy American Act, the Berry Amendment, and various DFARS requirements regarding cybersecurity and the prohibition of certain telecommunications equipment.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 325510
New
DIBBS
POLYURETHANE COATING
Solicitation # SPE8ES-27-T-0231
Solicitation SPE8ES-27-T-0231 is a procurement by the Defense Logistics Agency for one box of black polyurethane coating, specifically 10cc two-component touchup pens (SEMPEN) under NSN 8010015603448. The item must adhere to FED-STD-595 color number 37038 and is classified as a critical application item with a non-extendable shelf life of six months. Delivery is required within five days of order to the Hazardous Material Element at Travis AFB, California, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA technical and quality requirements, including supply chain traceability documentation and hazardous material communication standards that prohibit the intentional addition of mercury. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and RP001, with specific requirements for hazardous material labeling per 29 CFR 1910.1200. Quality assurance will be conducted using MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and DFARS cybersecurity standards for safeguarding covered defense information.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 325510
New
DIBBS
INSULATING COMPOUND KIT, ELECTRICAL
Solicitation # SPE4A6-27-R-X146
Solicitation SPE4A6-27-R-X146 is an Indefinite Delivery Purchase Order (IDPO) issued by the DLA Weapons Support ASC Commodities Division for the procurement of electrical insulating compound kits. The contract is a small business set-aside with a base period of five years, during which delivery orders may be placed. The primary requirement is for 50 kits (with a guaranteed minimum of 25 for the base year) of International Paint LLC part number 683-3-2. Each kit must contain 2.0 quarts of base component and 1.0 quart of curing agent packaged separately within a single container. The items are critical application components with a non-extendable shelf life of 60 months. The contract mandates strict adherence to quality and safety standards, including the submission of SDS and OSHA hazard warning labels for approval by technical personnel prior to award. Packaging and marking must comply with MIL-STD-2073-1 Appendix D and MIL-STD-129, with specific requirements for cushioning and the inclusion of a detailed contents list. Inspection and acceptance are conducted at the origin, and the required delivery lead time is 160 days after receipt of order. Pricing is based on a firm-fixed-price model, and the award will be determined based on best value, weighing price, past performance, and delivery schedules.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 325510
New
International
Roof Waterproofing Material SupplyThis subcontract for Roof Waterproofing Material Supply involves providing essential waterproofing system materials to prime contractors working on Leicester City Council facility projects. The scope of work includes the sourcing and delivery of waterproofing membranes, sealants, and adhesives, all of which must adhere to the technical specifications available on the eastmidstenders.org portal. Additionally, the supplier is responsible for providing all necessary material quality certifications and ensuring the timely delivery of these materials to the designated project sites. The opportunity was posted on October 29, 2026, with a response deadline of November 12, 2026. Classified under NAICS code 325510, the contract is managed by the Leicester City Council. Interested parties can find further details through the official tender notice provided by the agency.
Leicester City Council

POSTED

2 days ago

DEADLINE

in 12 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 325510
Federal
Brushes, Paints, Sealers, and Adhesives
Solicitation # DON-SNOTE-040723-002

POSTED

over 22 years ago

DEADLINE

N/A
View Details
NAICS: 325510
Federal
68 -- NOTICE OF INTENT TO WAIVE NONMANUFACTURER RULE - PAINT & PAINT MANUFACTURING
Solicitation # Reference-Number-SBAHQ-072304-04

POSTED

over 22 years ago

DEADLINE

N/A
View Details
NAICS: 325510
Awarded
Federal
80 -- MSC Fleet Paint and Related Services
Solicitation # N00033-03-R-8004
Military Sealift Command

POSTED

over 22 years ago

CLOSED

over 22 years ago
View Details
NAICS: 325510
Awarded
Federal
68--SOLE SOURCE PROCUREMENT WITH PENNETONE CORPORATION FOR A REQUIREMENTS CONTRACT FOR PAINT STRIPPING COMPOUND, BASE PLUS 4 OPTION YEARS
Solicitation # W911KF04Q0088
W6QK Acc Anad

POSTED

over 22 years ago

CLOSED

over 22 years ago
View Details
NAICS: 325510
Federal
80 -- COATING SYSTEM,NON SKID
Solicitation # Reference-Number-MPNFFJ6534

POSTED

over 22 years ago

DEADLINE

N/A
View Details
NAICS: 325510
Federal
80 -- COATING SYSTEM: NON SKID
Solicitation # Reference-Number-MPNBF32104

POSTED

over 22 years ago

DEADLINE

N/A
View Details
NAICS: 325510
Awarded
Federal
80 -- 80- - Paints and sealers
Solicitation # FN1167-03
Inc Federal Prison Industries

POSTED

over 22 years ago

CLOSED

over 22 years ago
View Details
NAICS: 325510
Federal
80 -- PAINT SYSTEM
Solicitation # MPNBDZ5724

POSTED

over 22 years ago

DEADLINE

N/A
View Details
NAICS: 325510
Federal
Brushes, Paints, Sealers and Adhesives
Solicitation # DON-SNOTE-040301-001

POSTED

over 22 years ago

DEADLINE

N/A
View Details
NAICS: 325510
Federal
80 -- Non-Skid Coating System
Solicitation # MPNFCU9504

POSTED

over 22 years ago

DEADLINE

N/A
View Details
NAICS: 325510
Federal
80 -- INSULATING COMPOUND, THERMAL
Solicitation # Reference-Number-MPNBA88014

POSTED

almost 23 years ago

DEADLINE

N/A
View Details
NAICS: 325510
Federal
80 -- PAINT SYSTEM
Solicitation # Reference-Number-MPNB7R5104

POSTED

almost 23 years ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS