Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Buffalo Zoo Security Cameras

Active
2139497State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Buffalo Zoo is soliciting bids for a turnkey project to restore and improve its security camera system at 300 Parkside Avenue, Buffalo, New York. The project is necessitated by infrastructure failures caused by environmental exposure, which have left approximately 26 cameras without a feed. The scope of work includes the installation of roughly 3,100 feet of 2-inch thick conduit along Meadow, Crandall, and Parkside Drive, the replacement of 26 cameras, the installation of a 16-port PoE+ Switch in the maintenance building, and the provision of approximately 15 new 8ft x 6-inch stainless steel fence posts with mounting hardware. Additionally, the contractor must perform civil work consisting of a 40-foot trench and conduit installation at a 6-inch depth from the fence line to the maintenance building, including rough backfill. The contract term is six months, with work performed during normal business hours from 7:30 am to 4:00 pm, Monday through Friday. Interested contractors must be experienced in security and site protection systems. Proposals are due by November 2, 2026, at 3:30 PM and must be submitted to the attention of William Gaugliardo. To avoid disqualification, submissions must include a clear scope of work, a complete turnkey cost breakdown for labor and materials, a signed Contractor Code of Conduct form, insurance certificates, and detailed warranty information for both labor and materials. Proposals should also specify the method of repair, provide material data sheets, list expected material lifespans, and include projected durations and potential commencement dates.

General Info

Buffalo Zoo seeks bids for a turnkey security camera system restoration project.

Place of Performance

300 Parkside Avenue, Buffalo NY 14214, NY, USA

Set-Aside

NONE

Documents

(3)

Buffalo Zoo Request for Quotation – Cameras

DOCX•rfq

Buffalo Zoo Security Cameras RFQ

PDF•rfq

Buffalo Zoo Security Cameras RFQ

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNew York → Buffalo Zoo
Contacts3 people available
OfficeN/A
Organization / AgencyNew York → Buffalo Zoo
Office AddressN/A
Contacts
James OliverDirector of Facilities & Construction
William GaugliardoSafety and Compliance Manager
James OliverDirector of Facilities & Construction

Full Description

Show more
Over the past several years the security cameras around grounds have experienced a plethora of issues that are causing concern for the security of the site. The Zoo is soliciting bids from contractors that are experienced in security systems and site protection systems. This is a turnkey project. Business enterprises awarded an identical or substantially similar procurement contract within the past five years: None

Similar Contracts

Same NAICS industry code

NAICS: 561621
New
Federal
H312--Fire Alarm Maintenance Service Contract FY27 - NEW Base + Four - 583
Solicitation # 36C25027Q0009
Solicitation 36C25027Q0009 is a request for proposals for a fire alarm maintenance service contract for FY27 at the Richard L. Roudebush VAMC in Indianapolis, Indiana. The scope of work includes the inspection, testing, maintenance, and minor repair of electrical and mechanical components of fire alarm and suppression systems across the main hospital building, several campus out-buildings, and the Cold Springs Road remote site. Key requirements include annual functional testing of all initiating devices and notification appliances, the provision of a survey-ready device-level maintenance program, and 24/7 UL-listed central station monitoring. All work must comply with NFPA standards, including NFPA 72-2025 and NFPA 25-2026, as well as regulations from The Joint Commission and the Authority Having Jurisdiction. This procurement is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). Eligible offerors must be listed in the SBA certification database and provide a mandatory compliance certification under VAAR 852.219-75, certifying that no more than 50 percent of the contract value will be subcontracted to non-SDVOSB or non-VOSB firms. The contract structure consists of a base period from December 15, 2026, to December 14, 2027, with an additional one-year option. Award will be based on price alone for a responsible offeror. Quotes are due by October 21, 2026, at 10:00 AM EDT, and must be submitted to the Department of Veterans Affairs Network Contracting Office 10.
250-NETWORK Contract Office 10 (36C250)

POSTED

about 19 hours ago

DEADLINE

in 20 days
View Details
NAICS: 561621
New
SLED
Walk-Through Weapons Detection System with an X-Ray Scanner Component
Solicitation # STATE 0000000594SL
The State of Missouri, through the Office of Administration, Division of Purchasing, is soliciting proposals for a turnkey walk-through weapons detection system with an X-ray scanner component to be installed at the Missouri State Capitol Building and the Governor's Mansion in Jefferson City. The system must be capable of detecting, classifying, and locating weapons on individuals without requiring them to empty their pockets, utilizing a WLAN network for real-time threat resolution and providing at least 30 days of data storage. Vendors may propose two procurement options: a purchased solution involving the acquisition of three single-lane weapons detection systems and one X-ray scanner with subsequent maintenance agreements, or a leased solution where all maintenance and repairs are included in the annual lease cost. The contract includes an initial period with the possibility of three additional one-year renewal options. The award will be based on the lowest and best vendor, determined by a combination of a pass/fail compliance review and a cost evaluation of the chosen procurement option. Preference points are available for vendors adhering to the Buy American Act, as well as bonus points for commitments to nonprofit organizations for the blind or sheltered workshops. Proposals must be submitted electronically via MissouriBUYS by October 12, 2026. Required documentation includes various business compliance exhibits, tax certifications, and a notarized Affidavit of Work Authorization. All equipment must be shipped FOB Destination, Freight Prepaid and Allowed, and the contractor must comply with federal and state non-discrimination laws and federal funding requirements, including the 2 CFR Part 200 guidelines.
PROC OA DIVISION OF PURCHASING PROCUREMENTS

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 561621
New
SLED
Installation of Access-Controlled Arm Gates – Vehicle Entry and Exit
Solicitation # 2139475
The New York State Office for People With Developmental Disabilities (OPWDD) is requesting proposals for the installation of access-controlled vehicle entry and exit arm gates at two Staten Island locations: 46 Executive Way and 1050 Forest Hill Road. The scope of work requires the contractor to provide and install two commercial-duty automatic barrier arm gates per location, equipped with reflective markings, safety signage, and vehicle detection sensors. The system must integrate with existing HID proximity card readers across four locations and include a four-function Security Officer desk control station with operational two-way communication. The contractor is responsible for all labor, materials, and infrastructure, including concrete foundations, bollards, and surge protection. This procurement will be executed via two separate purchase orders with payment terms of net 30 upon completion. A mandatory site visit is required before bidding, and the use of sub-contractors is strictly prohibited. Proposals must be submitted by October 14, 2026, and must include the vendor's NYS SFS Supplier ID, estimated lead times, and a detailed breakdown of all additional costs such as fuel surcharges and travel. Awarded vendors must provide proof of prevailing wage, workers compensation, disability, and liability insurance, as well as a Lobbying Form and DOL Contractor Registry Certificate. Final acceptance is contingent upon successful testing of all safety devices, access controls, and communication systems witnessed by an OPWDD representative.
NYS Office for People with Developmental Disabilities

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 561621
New
SLED
06826B0003-Installation and Warranty Service of Security System for 8th Floor for 345 Adams Street
Solicitation # 06826B0003
The Administration for Children’s Services (ACS) is seeking a Security Integrator through a Competitive Sealed Bid to install, support, and maintain a Genetec Electronic Security System (ESS) and associated infrastructure for the 8th-floor renovation at 345 Adams Street, Brooklyn, NY. The project involves deploying the most recent Genetec Security Center Platform, integrating Axis cameras, Mercury controllers, and HID readers to create workspace for various ACS programs. The anticipated contract term runs from January 1, 2027, to December 31, 2031, with a total maximum available funding of $519,716.00. The winning contractor will be reimbursed based on proposed rates and must provide a five-year warranty, consisting of one year during installation and four subsequent years of service. The award will be based on Best Value, evaluating project understanding, organizational qualifications, and experience. Key deliverables include a fully commissioned system, supervisor and operator training, and a 30-day stability period following acceptance testing. Technical requirements specify strict cabling color coding and labeling standards, and the contractor must comply with New York City's PASSPort submission process, prevailing wage laws, and cybersecurity policies. Bids must be submitted via PASSPort by October 2, 2026, with the official bid opening scheduled for October 5, 2026. While the contract is not subject to NYC Local Law 1 subcontracting goals, bidders must adhere to specific PASSPort entry requirements to enable submission.
Administration For Children's Services

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 561621
New
Federal
Electronic Ramp Gate PM
Solicitation # FA812526Q0087
Solicitation FA812526Q0087 is a firm fixed price request for quotes for the preventive maintenance and over-and-above services of seven DSX Electronic Ramp Gate Systems at the Oklahoma City-Air Logistics Complex, Tinker Air Force Base, Oklahoma. This small business and HUBZone set-aside requires the contractor to perform four quarterly maintenance visits per machine annually, including mechanical inspections, battery replacements, and WinDSX software updates. The period of performance runs from November 1, 2026, to October 31, 2027. The contractor must provide all labor, tools, and materials, ensuring all work conforms to original equipment manufacturer specifications. Award will be based on a technically acceptable and lowest total evaluated price basis. To be deemed technically acceptable, offerors must provide a detailed written statement and supporting documentation, such as resumes and certifications, proving at least five years of experience in the required services and specific WinDSX software certification. Technicians must be capable of arriving on-site within four hours of a malfunction notification. Proposals must include pricing for quarterly maintenance, hourly technician labor rates for over-and-above repairs, and actual commercial listed prices for parts. All quotes are due by October 2, 2026, and must be submitted to the designated points of contact.
FA8125 Afsc Pzima

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 561621
New
SLED
Conservation/MRD/Gulf Shores - Fire Equipment Inspections
Solicitation # SRC0000036744
The State of Alabama is seeking a certified and insured vendor to provide comprehensive fire equipment inspections, maintenance, and service for the DCNR Marine Resources Division Gulf Shores Office located at 999 Commerce Drive, Gulf Shores, AL. This all-or-none solicitation requires the vendor to be capable of servicing all equipment without the use of third-party vendors. The scope of work includes annual inspections of a Simplex Fire Control 4010ES fire alarm system, annual and semi-annual inspections of a Guardian III Model G300-B hood suppression system, as well as annual and semi-annual fire sprinkler inspections, annual backflow preventer inspections, annual fire hydrant flow tests for two hydrants, and annual inspections for 40 fire extinguishers in compliance with NFPA 10. A mandatory site visit was scheduled for October 5, 2026, with Rob Berry serving as the point of contact. The resulting agreement is intended to be a multi-year contract with a maximum term of five years or a cumulative value not to exceed 25,000 dollars, whichever occurs first. The contract will be renewed annually, and the vendor must maintain consistent pricing, products, and services throughout the term. Bidders must submit responses electronically via Alabama Buys and provide necessary certifications, including E-Verify enrollment and tax certifications pursuant to Act No. 2006-557. The vendor is also required to provide a percentage discount for parts, labor, and maintenance as needed. Final acceptance of all services is subject to inspection by the State of Alabama.
Mr Administrative Mobile

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 561621
New
SLED
201-720059/Fire alarm inspection
Solicitation # SRC0000036709
This solicitation, identified as SRC0000036709, is a request from the State of Alabama for fire alarm inspection services at Colbert County locations, specifically at 295 Highway 20 East in Tuscumbia, AL, and 2803 S. Wilson Dam Road in Muscle Shoals, AL. Prospective vendors are required to schedule a pre-bid walkthrough with Micah Witt and must be located no further than 10 miles from the specified sites. The contract is structured as a Quick Quote through the Alabama Buys portal, with a response deadline of October 14, 2026. Any resulting agreement may include annual renewals for a total period of up to five years, provided the total contract cost does not exceed a ceiling of $25,000. The procurement is governed by the Standard Terms and Conditions for Quick Quotes from the Alabama Office of the Chief Procurement Officer. Key compliance requirements include mandatory E-Verify enrollment for Alabama employers, certification of Alabama sales and use tax compliance, and registration with the Alabama Secretary of State for out-of-state entities. The State reserves the right to evaluate bids based on price reasonableness and cost realism, and may request proof of professional licenses, insurance certificates, and manufacturer reseller authorizations. All disputes are subject to the jurisdiction of Montgomery, Alabama, with money disputes being handled by the Board of Adjustment of the State of Alabama. Payment will be made via electronic methods such as P-cards or EFT, and all services are subject to satisfactory inspection by the State prior to acceptance.
N Reg Tuscumbia Area

POSTED

3 days ago

DEADLINE

in 13 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS