Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on June 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Building Automation & Control Systems (BAS/BMS) Commissioning

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541512
New
Federal
Combined Synopsis/Solicitation and Notice of Intent to Sole Source - Radioactive Liquid Waste Processing Process Controls Replacement (PLC Upgrade)
Solicitation # N4215826QE058
Solicitation N4215826QE058 is a combined synopsis and request for quote for the procurement, integration, and installation of an upgraded Programmable Logic Controller (PLC) system for the Radioactive Liquid Waste Processing Process Controls at the Norfolk Naval Shipyard (NNSY) in Portsmouth, Virginia. The project aims to modernize the control system in building CEP-198 by providing a direct duplicate of an existing system at NNSY to ensure component and software interchangeability. This is a sole-source, firm-fixed-price procurement intended for Systems East, LLC, with an estimated value of $1,644,637.50. The restriction to a sole source is justified by the proprietary nature of the design data and the requirement for standardization with existing architecture. The contract features a 24-month period of performance, with service dates spanning from November 30, 2026, to November 29, 2028. The scope of work is divided into phased deliverables, including pre-planning, planning, network installation, and a final phase for testing, training, and closeout. Key technical requirements include compliance with NAVSEA 389-0288 radiological controls, OSHA shipyard employment standards, and various CFR titles. To be considered for award, the vendor must provide a technical capability certification, a detailed staffing plan with employee resumes, and a technical proposal including removal and installation plans. Invoicing will be managed through the Wide Area Workflow (WAWF) system. The solicitation closes at 1:00 PM EDT on September 18, 2026.
Norfolk Naval Shipyard Gf

POSTED

about 15 hours ago

DEADLINE

in 17 days
NAICS: 541512
New
Federal
RFI: Air Force Enterprise Rapid Operations Support (AEROS)
Solicitation # AEROS
The Air Force Life Cycle Management Center (AFLCMC) C3BM OL-2 is seeking information for the Air Force Enterprise Rapid Operations Support (AEROS) contract. This initiative aims to secure non-personal commercial services to provide enterprise functional and technical operations help desk support for AFTRANS applications, covering both legacy system portfolios and Next Generation modernized system portfolios. The scope involves providing comprehensive support for critical command and control capabilities within a government-provided secure cloud environment. Operations are required to be global and continuous, operating 24/7/365 across both unclassified and classified networks to support a distributed user base, including the Primary Operations Center and Regional Operations Divisions within geographic Air Operations Centers worldwide. Key technical requirements include high-severity triage, immediate escalation protocols, root cause identification through the correlation of disparate data sources, and the generation of status and health reports. All contractor personnel must maintain the required active security clearances and have access to secure facilities. The government anticipates this requirement will be a small business set-aside under NAICS code 541512. While currently in the Request for Information stage, the anticipated solicitation is expected in the first quarter of 2027, with an award date by September 2027 and a total contract term of five years.
FA2318 Aflcmc C3MK

POSTED

about 15 hours ago

DEADLINE

in 29 days

AI Contract Overview

Show more

The contract pertains to the commissioning of Building Automation and Control Systems, focusing on the testing and validation of direct digital control systems to ensure proper functionality across key operational areas including setpoint accuracy, alarm management, and cross-system integration. The work requires rigorous performance verification to confirm that all automated systems operate as designed, maintain precise environmental controls, respond appropriately to alarm conditions, and seamlessly communicate with interconnected building systems. All activities must align with industry best practices and be performed in accordance with established commissioning protocols to guarantee system reliability and efficiency. This subcontract is issued by the National Research Council of Canada under the Government of Canada, with a NAICS code of 541512 indicating it falls under computer systems design and related services. The solicitation was posted on June 2, 2026, and responses are due by June 30, 2026, with the place of performance located in Canada. The scope demands technical expertise in building automation environments and expects deliverables that validate full system integration, ensuring that all components meet specified performance benchmarks prior to final acceptance.

General Info

Subcontract for testing and validating DDC building control systems, ensuring accuracy and integration.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

541512 - Computer Systems Design ServicesView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

This scope was carved out of 25-58316.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

U89 PAC 03 and PAC 04 Replacement

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → National Research Council of Canada
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Testing and validation of DDC systems, setpoint accuracy, alarm management, and cross-system integration.

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 621511
New
International
Medical Surveillance Program for NRC - Clinical Trial Material Facility - CTMF - Amendment 2
Solicitation # 26-58074
The National Research Council of Canada is seeking a contractor to deliver a Medical Surveillance Program for personnel accessing its new Good Manufacturing Practices-compliant Clinical Trial Material Facility in Montreal, which produces vaccines and biologic materials for clinical trials. The contractor must conduct timely and ongoing health evaluations to ensure all staff meet minimum fitness requirements for facility access, with services performed remotely at vendor-operated locations within a 25 km radius of the facility. All assessments, documentation, and reporting must align with the facility’s Standard Operating Procedure and federal standards for Protected B information handling, requiring the contractor to hold a valid Designated Organization Screening security clearance and comply with all security protocols outlined in Annex E. The contract follows a Lowest Price Technically Acceptable evaluation method, where technical compliance with mandatory criteria in Annex F is a non-negotiable threshold, and award is determined solely by the lowest total evaluated price among compliant offers. The base performance period is anticipated to run from September 2026 to September 2028, with two optional 24-month extensions through September 2032, each priced no more than 5% higher than the prior period. Payment will be made via electronic direct deposit to the designated NRC invoice submission address, contingent upon successful completion of contracted services and adherence to the Statement of Work in Annex C and Basis of Payment in Annex D. Contractors must demonstrate the capacity to conduct required medical testing at minimal service locations, transmit completed fitness certificates electronically to NRC representatives, and comply with all federal procurement integrity requirements including reciprocal procurement eligibility limited to Canada and partner nations under free trade agreements. Prohibitions against forced labor and human trafficking are strictly enforced, with contract termination possible for violations. Offerors must declare any prior employment as a public servant, and affirmative responses trigger mandatory disclosures under Treasury Board policy. Proposals must be submitted electronically by August 21, 2026, using only approved file formats, without compression, and not exceeding 10 MB in total size. No contract modifications or administrative changes may be made except by the designated Contracting Authority, Cindy Romain, and no Contracting Officer’s Representative or technical representative has been identified.
Medical Laboratories

POSTED

about 22 hours ago

DEADLINE

in 3 days
View Details
NAICS: 333413
New
International
26-58018 Laboratory Wind Wall System, Amendment #7
Solicitation # 26-58018
The National Research Council of Canada's Aerospace Research Centre (NRC AERO) is soliciting a turnkey Laboratory Wind Wall System for its Drone and Flight Autonomy Laboratory in Mirabel, Quebec. The system is designed to support research on the performance, control, and safety of mid-size unmanned aircraft operating in complex aerodynamic environments, such as urban wind fields and ship airwakes. The requirement includes the design, fabrication, delivery, and commissioning of a vertically stacked fan array with a nominal jet face of 5m x 5m, positioned 3m above ground level. The system must provide controlled, repeatable airflow with specific performance metrics, including a maximum axial wind speed of 21-22 m/s, ramp-up acceleration of at least 10 m/s², and a non-dimensional swirl number of 0.5 or less at the test plane. The contract is a fixed-price arrangement with milestone-based payments, including 10% upon acceptance of the Preliminary Design Package and 20% upon acceptance of the Critical Design Package. The successful offeror must provide a minimum one-year warranty and ensure the system is compatible with North American industrial electrical standards and Canadian building codes. The NRC reserves an option to expand the system to 7m x 7m. Evaluation of proposals is based on a weighted formula consisting of Technical Merit (60%), Canadian Value-Added (25%), and Price (15%), with mandatory technical criteria and a minimum technical score of 50 points serving as pass/fail gates. All deliverables must be provided in both English and French, and final delivery is expected by March 31, 2028.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 30 days
View Details
NAICS: 334519
New
International
Fast Electronic Spectrum analyzer
Solicitation # 26-58101
The National Research Council Canada is soliciting proposals for the procurement of one new electronic spectrum analyzer to support the Ultrafast Quantum Photonics Laboratory. The instrument will be used to characterize radio-frequency spectra, noise, and modulation signals from laboratory photodetectors and electronic readout systems for experiments in quantum optics and high-speed optical measurements. Mandatory technical requirements include a frequency measurement range from 10 Hz to at least 7 GHz, a maximum analysis bandwidth of at least 40 MHz, a displayed average noise level of -165 dBm or lower at 1 GHz, and phase-noise performance of -109 dBc/Hz or lower at a 1 GHz carrier frequency. The system must also include suitable measurement software and support the detection of weak signals in the presence of larger signals. This solicitation is open exclusively to Canadian suppliers, with the contract award based on the lowest evaluated price among those who meet all mandatory technical criteria. All deliverables, including the hardware, user documentation, and a minimum one-year warranty, must be delivered DDP to Ottawa by March 1, 2027, with the overall contract term extending to March 1, 2028. Proposals must be submitted electronically by September 7, 2026, and must be divided into separate technical and financial volumes to avoid disqualification. Additionally, the contractor must comply with strict environmental packaging standards, anti-forced labour certifications, and electrical equipment certifications accredited by the Standards Council of Canada.
Other Measuring and Controlling Device Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 332313
New
International
26-58008 Fabrication of Heavy Impact Test Theater (HITT) Components, Question and Answer 4
Solicitation # 26-58008
The National Research Council of Canada's Ocean, Coastal and River Engineering Research Centre requires the fabrication and delivery of precision mechanical and structural components for the Heavy Impact Test Theater (HITT) to support full-scale ice impact testing. The scope of work involves the manufacturing of a modular Hammer Assembly consisting of sixteen steel cube modules, an Anvil Assembly featuring machined low-density polyethylene and aluminum elements, and a Free Sway System for guided movement. While the Surge Restraint System was initially listed, subsequent amendments clarified it is no longer required. All components must be fabricated according to specific NRC engineering drawings and delivered DAP to St. John's, Newfoundland and Labrador, with a final delivery deadline of March 31, 2027. The procurement process is governed by a weighted evaluation system where 70 percent of the score is based on technical merit and 30 percent on price. To be compliant, offerors must demonstrate experience with heavy structural fabrication of assemblies weighing at least 1000 kg, provide proof of adequate facility capacity, and maintain a recognized quality control process. The contract includes strict requirements for environmentally preferable packaging, security clearances for technical data, and adherence to the Federal Contractors Program for Employment Equity. Final award is based on the highest combined rating of technical merit and price, provided the offeror meets a minimum technical threshold of 60 points.
Plate Work Manufacturing

POSTED

6 days ago

DEADLINE

in 10 days
View Details