Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BUSHING BLANK

Active
SPE4A6-26-T-12EGFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 13 bushing blanks with NSN 5365-01-626-0837 under solicitation SPE4A6-26-T-12EG, issued by the Department of Defense’s ASC Commodities Division. The unit of issue is each, with a total price of $13.00 per unit, totaling $169.00 for the full quantity. Delivery is mandated FOB origin with a required delivery date of April 18, 2027, and a lead time of 171 days. The goods must be packaged in compliance with ASTM D3951 and marked per MIL-STD-129, with all packaging and labeling subject to the DLA Master List of Technical and Quality Requirements, which takes precedence over any other standard. No variance is permitted in quantity—exact delivery of 13 units is required. Inspection and acceptance occur at the destination, specifically at the DLA Distribution San Joaquin warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Palletization must follow DLA’s RP001 packaging requirements, and all shipments must adhere to DLAD Proc Note C19 for transportation and C20 for first destination handling. The need ship date is January 31, 2027, and the contract references specific technical and quality controls through R and I numbers from the DLA Master List. The point of contact for inquiries is Emma Garrett, reachable via email and phone provided in the solicitation data.

General Info

Procure 13 bushing blanks, FOB origin, delivery by April 18, 2027, $169 total, DLA packaging and inspection standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332119 - Metal Crown, Closure, and Other Metal Stamping (except Automotive)View NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12EG.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Emma Garrett
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING BLANK
BUSHING BLANK
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
OSHKOSH DEFENSE LLC 75Q65 P/N 2HK160
JARP INDUSTRIES, INC. 63899 P/N 510678BP
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017739770 0001 EA 13.000
NSN/MATERIAL:5365016260837
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be
SPE4A6-26-T-12EG
SECTION B
PR: 7017739770 PRLI: 0001 CONT’D
as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/31/2027 Original Required Delivery Date:04/18/2027
SPE4A6-26-T-12EG NSN/Part Number: 5365-01-626-0837 Quantity: 13 EA Purchase Request: 7017739770QTY: 13 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-613C
The contract pertains to the procurement of a SHIM part identified by NSN 5365-01-725-5627 and part number 56767-1, manufactured in compliance with Basic Drawing NR 70210 56767 Revision D dated 11/07/1955. A total of 21 units are to be delivered FOB origin with zero variance allowed in quantity, and delivery must be completed within 171 days from the contract award, with an original required delivery date of January 7, 2027, and a need ship date of January 31, 2027. Inspection and acceptance occur at the origin, and packaging must conform to MIL-STD-2073-1E with designated preservation methods, materials, and unit packaging details, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and the delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, including specific provisions for removal of government identification, physical marking of bare items, and documentation for source approval requests. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and covered defense information is subject to RD002 controls. Documentation for source approval must meet RC001 standards, and all units must be shipped in accordance with DLA transport and freight procedures. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613C, and the primary point of contact is Jessica Gentry.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SOCKET, FLUSH, CROSSB
Solicitation # SPE4A6-26-T-12HV
The contract pertains to the procurement of 194 units of a SOCKET, FLUSH, CROSSB item with NSN 5365-01-646-0939 and part number PH285P-14A supplied by PECK & HALE, LLC. The delivery is required within 153 days from the contract date, with a firm delivery target of January 13, 2027, and an original required delivery date of April 1, 2027. Items must be shipped FOB origin under solicitation SPE4A6-26-T-12HV, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container specifications. Marking follows MIL-STD-129 with no special markings required, and palletization adheres to DLA packaging standards. Mercury and mercury compounds are strictly prohibited in all packaging and preservation processes. Compliance with technical and quality requirements is governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances mandated unless otherwise specified, and attributes are classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The unit of issue is each (EA), with a unit price of $194.00, resulting in a total price of $37,636.00. All shipments must be directed to the designated DLA Delivery Point at New Cumberland, PA, and transportation instructions are governed by DLAD procedural notes C19 and C20. The contract is administered by the Department of Defense, ASC Commodities Division, with Emma Garrett serving as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RING
Solicitation # SPE7L1-26-T-910S
The contract pertains to the procurement of 1,220 units of a spacer ring identified by NSN 5365-15-120-2240 and part number 60154625, supplied by IVECO DEFENCE VEHICLES S.P.A. The item is classified as a commercial item and must comply with technical and quality requirements referenced from the DLA Master List, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise stated. Attributes are assigned verification levels or AQLs based on criticality, with unspecified attributes treated as major. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special markings, and palletization in line with DLA standards. Delivery is FOB origin with a 171-day lead time, inspection and acceptance occurring at the destination. The unit of issue is each, with a total price of $1,220.000. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original required delivery date set for May 12, 2027, and a need ship date of January 31, 2027. Transportation protocols and freight details are governed by DLA procedural notes C19 and C20. The solicitation was issued under SPE7L1-26-T-910S, with the response deadline on August 12, 2026, and falls under NAICS code 332119.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-T-613L
SPACER, PLATE, identified by NSN 5365-01-692-5044 and part number 78250-13175-101, is being procured under contract SPE4A7-26-T-613L for a quantity of 23 units, each as a single end item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance defined by the revision in effect on the solicitation or award date depending on acquisition size. Packaging, marking, and handling must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization following DLA-specific procurement guidelines. Inspection and acceptance occur at the destination point, with zero tolerance for non-conformances in sampling unless otherwise stated, and verification levels or AQLs are strictly assigned based on attribute criticality per prescribed standards. Delivery is FOB origin with a required delivery date of May 31, 2027, and a target ship date of January 31, 2027, allowing 171 days for fulfillment. The item shall be delivered to DLA Distribution San Joaquin at 25600 S Chrisman Road, Tracy, CA 95304-5000, with unit of issue EA and no variance permitted in quantity. Transportation and freight details are governed by DLAD procedural notes C19 and C20. The procurement is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division with primary point of contact Jamiah Sutton.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SPACER, TAPERED
Solicitation # SPE7L1-26-T-914T
The contract is for the procurement of a tapered spacer, identified as a commercial item with part number 5802057642 and NSN 5365150269649, supplied by IVECO DEFENCE VEHICLES S.P.A. The item is classified as a critical application component, and delivery is required in two separate quantities: 21 units and 48 units, for a total of 69 units, to be delivered FOB origin with zero variance allowed. Delivery must reach the designated destinations within 171 days, with the original required delivery date set for December 15, 2026, and a need ship date of January 31, 2027. Inspection and acceptance occur at the destination, and units must be packaged in compliance with ASTM D3951, though higher-priority DLA technical and quality standards supersede this. Packaging and labeling must adhere to MIL-STD-129, with palletization mandated under DLA Packaging Requirements RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract specifies two distinct shipping addresses—one in New Cumberland, Pennsylvania, and another in Albany, Georgia—with transportation governed by DLAD procedural notes C19 and C20. The unit of issue is each (EA), with a stated unit price and total pricing provided per line item, and all documentation aligns with the DoD-authorized unit system as referenced through the official DLA portal.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-613H
The contract pertains to the procurement of four shims identified by NSN 5365-01-667-9141 under solicitation SPE4A7-26-T-613H, with a delivery requirement of 171 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions unless amended. Sampling must comply with MIL-STD-1916 or ASQ Z1.4 with a zero-defect acceptance criterion unless otherwise stated, and attributes are to be classified and verified per specified levels or AQLs. Inspection and acceptance are to occur at origin, and no Item Unique Identification is required per customer request. Packaging, removal of government identification from non-accepted items, and physical marking of bare items must conform to DLA standards. Technical data associated with the item is subject to export controls under ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, whether inside or outside the U.S. Only contractors with approved JCP certification, completed training on handling DOD export-controlled data, and DLA authorization may access this information. The contract is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with performance designated for Tracy, CA, and primary point of contact is Michael Johnson.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A7-26-T-614U
The contract is for the procurement of 27 units of a BUSHING, SLEEVE with NSN 5365-01-716-4542 under solicitation number SPE4A7-26-T-614U, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The purchase is designated as a Total Small Business Set-Aside, with a NAICS code of 332119, and requires responses by August 12, 2026, with delivery expected within 171 days after award. The item is subject to stringent technical and quality requirements as outlined in the DLA Master List, including packaging standards, removal of government identification from non-accepted supplies, and physical identification/marking of bare items. Technical data associated with the item is controlled under ITAR or EAR regulations, restricting disclosure or export to unauthorized foreign persons, regardless of location, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. Cybersecurity compliance is required at CMMC Level 2 through a certified third-party assessment organization. The place of performance is Cherry Point, North Carolina, and primary point of contact is Michael Johnson, reachable via phone and email provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, TAPERED
Solicitation # SPE4A7-26-T-615G
The contract is for the procurement of 10 tapered bushings with NSN 5365-01-701-7049 and part number C32022-35, supplied to meet Boeing’s specifications under reference SPE4A7-26-T-615G. All items must comply with stringent technical and quality requirements referenced from the DLA Master List, including physical identification, inspection at origin, packaging per MIL-STD-2073-1E and MIL-STD-129, and adherence to DLA packaging standards. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are subject to the highest verification levels. The item is designated as a critical application component, requiring full conformance and traceability. Packaging must use unit containers marked appropriately with no special marking code, palletized per DLA guidelines, and shipped FOB origin with no tolerance for quantity variance. Delivery is due within 171 days from the contract award, with a required ship date of January 31, 2027 and an original delivery deadline of May 11, 2028. Inspection and acceptance occur at origin, and all documentation must align with source approval and measuring equipment standards. The consignee is DLA Distribution San Joaquin in Tracy, California, with transportation governed by DLAD procedural notes. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, under a federal procurement framework managed by the Department of Defense’s ASC Supplier Operations division. The unit of issue is each, priced at $10 per unit for a total of $100, and the contract is administered with point of contact Lexus Henry.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
KNOB
Solicitation # SPE7L1-26-T-913E
This contract pertains to the procurement of two knobby components identified by NSN 5355-01-684-2181 under solicitation SPE7L1-26-T-913E, with a mandatory delivery schedule of 10 days after award. The solicitation, issued on August 4, 2026, with responses due by August 17, 2026, falls under NAICS code 332119 and is administered by the Department of Defense’s Land Supply Chain. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date, depending on the acquisition size. Packaging must comply with DLA standards, and all supplied items must be free of asbestos, with any substitutions requiring formal approval per Clause L30 and Provision 4 conditions. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements. Mercury and mercury-containing compounds are banned from direct contact with hardware unless exempted for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as defined by NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and substitutions for restricted materials require prior approval. The primary point of contact for inquiries is Kristina Derry, reachable via email and phone listed in the contract data.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332119
New
DIBBS
SPACER, STRAIGHT
Solicitation # SPE4A6-26-T-12CT
The contract specifies the procurement of 15 units of SPACER, STRAIGHT with NSN 5365016609736 under solicitation SPE4A6-26-T-12CT, with a unit price of $15.00 per unit, totaling $225.00. Delivery is required FOB origin within 171 days from the contract date, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must comply with ASTM D3951, superseded by any applicable DLA Master List of Technical and Quality Requirements. All packaging and labeling must adhere to MIL-STD-129, with unit of issue as EA and quantity per unit pack as 001, and palletization must follow RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT. The delivery destination is the DDSP New Cumberland Facility at 2083 Normandy Drive, New Cumberland PA 17070-5002. The original required delivery date is April 15, 2027, with a need ship date of January 31, 2027. Transportation details are governed by DLAD Proc Notes C19 and C20. The solicitation was posted on August 4, 2026, with a response deadline of August 12, 2026, under NAICS code 332119, managed by the DLA Commodities Division. Primary point of contact is Emma Garrett, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
BUSHING, ECCENTRIC
Solicitation # SPE4A7-26-T-612V
The item is a bushing, eccentric, identified by NSN 5365-01-667-8130, with a quantity of 121 units, under purchase request 7017740768, and subject to a delivery timeline of 171 days ADO. The solicitation, numbered SPE4A7-26-T-612V, was posted on August 4, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The NAICS code is 332119, indicating classification within the machinery manufacturing sector. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any transfer, including disclosure to foreign persons within or outside the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and distribution is restricted solely to DLA contractors who possess a valid US/Canada Joint Certification Program certification, have completed required DOD export-controlled data training and questionnaire, and have received explicit approval from the DLA controlling authority. Physical identification and bare item marking requirements are in effect, as is compliance with CMMC Level 2 as a certified third-party assessment organization. Contact for inquiries is Hannah Leonard, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)The contract pertains to the manufacture or supply of standardized fasteners identified by NSN 5307-01-212-4400, specifically for integration into defense systems. As a commercial item procurement, it mandates strict adherence to military specifications and federal supply chain standards to ensure compatibility, reliability, and interoperability within military equipment. The item falls under NAICS code 332312, classifying it as a manufacturing activity related to screw, bolt, and fastener production, and is being procured under a subcontract mechanism by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, providing vendors with a two-week window to submit proposals. While no specific place of performance or point of contact is detailed, the procurement is governed by the Defense Logistics Agency’s procurement framework, as indicated by the official DIBBS portal link. All suppliers must meet the defense sector’s quality, documentation, and delivery requirements without any set-aside provisions for small or disadvantaged businesses, emphasizing a competitive, open-market approach aligned with DoD supply chain objectives.
Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details