Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BUSHING, SLEEVE

Active
SPE4A6-26-T-12CNFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifications pertain to a BUSHING, SLEEVE with NSN 3120-01-633-3027, for a quantity of two units, with delivery required within 171 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. Cybersecurity compliance mandates CMMC Level 2 certification, either through self-assessment or evaluation by a certified third-party organization. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance occur at the supplier’s origin. Government identification must be removed from non-accepted items, and physical identification of the bare item must be marked according to specified guidelines. Although item unique identification is not required, DFARS 252.211-7003(c)(1)(i) governs this exemption. Technical data associated with this item is controlled under ITAR or EAR, and its disclosure to foreign persons, including foreign nationals within the U.S., is strictly prohibited without authorization; only DLA contractors with approved JCP certification, completed DOD export control training, and approved access rights may handle the data. The solicitation number is SPE4A6-26-T-12CN, issued on August 4, 2026, with responses due August 12, 2026, and performance is directed to New Cumberland, Pennsylvania. Primary point of contact is Charleen Weber of the ASC Commodities Division, Department of Defense.

General Info

Two bushing sleeves, NSN 3120-01-633-3027, due in 171 days, CMMC Level 2, ITAR/EAR controlled, DLA standardsapply.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336390 - Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12CN.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
CHARLEEN WEBER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING,SLEEVE
BUSHING,SLEEVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been
SPE4A6-26-T-12CN
SECTION B
approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3120-01-633-3027 Quantity: 2 EA Purchase Request: 7017739696QTY: 2 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336390
New
DIBBS
OIL FILTER CUTTER
Solicitation # SPE7L1-26-T-914K
The contract is for the procurement of one oil filter cutter with NSN 2940-01-536-9281 and part number 175-7546, supplied by approved vendors including Caterpillar Inc, Finning UK Ltd, and Hastings Deering (Aust) Pty Ltd. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit of issue as a single unit and no tolerance for quantity variance. The delivery is FOB origin with a 20-day lead time, and inspection and acceptance occur at the destination. The shipment must be dispatched using the fastest traceable means, excluding parcel post, with delivery addressed to W8T2 TX ARNG FMS 20 at 301 East Regis Street Suite 1122, Lubbock TX 79403-1122. The RDD is 777, and the shipment must be marked accordingly. The contract reference is SPE7L1-26-T-914K, with a required delivery date of July 30, 2026. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026. The contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact. All items must be properly labeled and palletized per DLA specifications, and government identification must be removed from non-accepted supplies. Configuration changes require formal engineering change proposals or variance requests.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
PANEL ASSEMBLY, CONSOLE
Solicitation # SPE7L4-26-T-5968
The contract specifies the procurement of one unit of a PANEL ASSEMBLY, CONSOLE with NSN 2540-01-179-8841 and part number L112652, supplied by CNH INDUSTRIAL AMERICA LLC. Delivery is required within five days of contract award, with shipment originating FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination. The item must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951; if hazardous per FED-STD-313, packaging must meet TQ requirement IP025, otherwise commercial packaging is permitted. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001. The shipment must be sent via traceable freight methods—parcel post is prohibited—and is to be delivered to the designated military receiving site at Fort Polk, Louisiana, under the RDD/NCMS shipment protocol. The contract references solicitation SPE7L4-26-T-5968, with a required delivery date of August 3, 2026, and the point of contact for inquiries is Anna-Rachelle Betts at DLA. The unit of issue is each (EA) and the total contract value is based on the listed unit price for a single item.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L1-26-T-912A
The contract pertains to the procurement of a single vehicular bracket with NSN 2590-01-612-3409 under solicitation SPE7L1-26-T-912A, requiring delivery within five days of award to San Diego, CA. The supplier must comply with stringent technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, and zero non-conformances required unless otherwise stated. Attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The item involves components subject to Qualified Products Lists or Qualified Manufacturers Lists, necessitating adherence to DLA’s procurement note H02. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require formal approval. The product contains export-controlled technical data subject to ITAR or EAR regulations, restricting disclosure to foreign persons and requiring prior authorization from the Department of State or Commerce; access is limited to contractors with approved US/Canada Joint Certification Program status, completed training, and DLA authorization. The contractor must be CMMC Level 2 certified as a third-party assessment organization and must handle covered defense information according to applicable protocols. Packaging must conform to DLA requirements, and government identification must be removed from rejected items. The solicitation closed on August 17, 2026, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
HOOK, PINTLE
Solicitation # SPE7L4-26-U-1050
This contract is for the procurement of a HOOK PINTLE with NSN 2540-01-558-4395 under solicitation SPE7L4-26-U-1050, issued by the Department of Defense through the Defense Logistics Agency. The item is classified as a critical application component and must conform to precise technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override any other specification unless explicitly authorized. The contract prohibits the use of Class I ozone-depleting chemicals in manufacturing or packaging, requiring any substitute chemicals to be submitted for approval. The item must be delivered FOB origin within 80 days in strict quantities of 135 units, with no tolerance for variance in quantity. Packaging must comply with DLA-specific requirements including MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging unless hazardous per Fed-Std-313, in which case TQ requirement IP025 applies, with palletization conforming to RP001. Inspection and acceptance occur at the destination point, and all packaging must reflect the prescribed Unit of Issue and Quantity per Unit Pack (QUP). The procurement is a total small business set-aside under NAICS code 336390, with the estimated unit price at $135.00 per item totaling $18,225.00, though the quantity is considered estimated and subject to modification by the IDC. The contract references the DLA-defined unit of issue system and directs contractors to the official online resource for ANSI X12 conversion. The point of contact is Heather Kessler of the LSO Combat Vehicles and Armament office, with full solicitation details available through the DIBBS system. The solicitation closed on August 19, 2026, with an award expected to follow, and all suppliers must comply with the requirement to remove government identification from non-accepted supplies. The contract does not specify delivery location beyond FOB origin, and all terms are governed by DLA policies with no deviations permitted without formal amendment.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7LX-26-U-9230
This contract requires the supply of a fluid filter element with a minimum filtration rating of 20 microns, designated by NSN 2910-01-502-6539 and part number FS1251 from Cummins Filtration Inc, under solicitation SPE7LX-26-U-9230. A total of 4,870 units must be delivered within 71 days FOB origin, with no variance permitted in quantity. The item is classified as a critical application and restricted source, mandating government engineering source approval prior to procurement. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue date for simplified acquisitions. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, with marking adhering to MIL-STD-129. The use of Class I ozone-depleting chemicals is strictly prohibited, and mercury or mercury-containing compounds are banned unless explicitly exempted for specific functional components such as certain batteries, instruments, or controls, with additional containment requirements for portable mercury devices. Configuration changes require formal engineering change proposals or variance requests, and covered defense information provisions apply. The contract is a total small business set-aside under NAICS code 336390, with Theodore Misiolek as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
TAPPET, ENGINE POPPE
Solicitation # SPE7L1-26-T-912M
The contract pertains to the procurement of three TAPPET, ENGINE POPPE units with NSN 2805-01-624-8049 and part number K0F-A3753-20-00, supplied by YAMAHA MOTOR CORPORATION, U.S.A. The items must be delivered within five days of contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering to the stricter requirements outlined in the DLA Master List of Technical and Quality Requirements, including labeling per MIL-STD-129 and palletization as specified in RP001. The Unit of Issue is each, with a quantity of three, priced at a total of $3.00 per unit. Shipment must be sent via traceable freight methods, excluding parcel post, to the designated military address in Huntsville, Alabama, with the freight shipping and marking instructions directed to W91TA6. The RDD is not required, and the project identifier is 9GQ TP 1. The original required delivery date is August 3, 2026, and the solicitation was issued under SPE7L1-26-T-912M with a response deadline of August 17, 2026. All technical and quality provisions are governed by the DLA Master List, whose applicable revision is controlled by the solicitation or award date depending on acquisition size. The contracting office is the Department of Defense’s Land Supply Chain, with primary point of contact Kristina Derry.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
PARTS KIT, SHOE BRAK
Solicitation # SPE7L1-26-T-914C
The contract pertains to the procurement of a Parts Kit, Shoe Brake, identified by NSN 2530-01-556-3335 and part number WSN381178100, with a quantity of four kits to be delivered within five days of contract award. Delivery is FOB origin, and the items must be packaged in strict compliance with MIL-STD-2073-1E, specifically Appendix D for kits, with marking requirements adhering to MIL-STD-129. All packaging, preservation, and shipping must meet DLA’s technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which governs the performance expectations for this procurement. The unit of issue, KT, and the specified preservation methods are detailed with codes indicating dry, non-corrosive, and non-protective materials where applicable. The shipment must be sent via traceable freight methods, prohibitively excluding parcel post, to the designated delivery point in Orlando, Florida, with the freight and marking address listed under W90N14. The supplier is required to maintain strict accountability, as the shipment carries an RDD designation and must include a TCN identifier. The required delivery date is August 4, 2026, with no tolerance for variance in quantity—exactly four kits must be delivered. The procurement is governed under solicitation SPE7L1-26-T-914C, under NAICS code 336390, and is issued by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency. The point of contact for inquiries is Kristina Derry, with additional government-specific identifiers and codes applied for internal logistics and tracking purposes.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
PARTS KIT, VEHICULAR
Solicitation # SPE8E7-26-Q-0282
This contract pertains to the procurement of a vehicular parts kit identified by NSN 6220-01-732-5629, with a firm fixed price and no tolerance for quantity variance. The item must be manufactured to strict technical specifications outlined in multiple reference drawings, all under TDP Rev A Gen 3, with revision dates ranging from July 2023 to August 2025 and July 2026 for the primary part number 57K01662-02. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, superseding any other standards such as ASTM D3951. The product must originate from a manufacturer approved on the Qualified Products List maintained by the Performance Review Institute at the time of contract award, and all packaging must adhere to DLA Packaging Requirements RP001 and MIL-STD-129 labeling standards. Hazardous materials must conform to FED-STD-313 and TQ requirement IP025, while non-hazardous materials require commercial packaging per ASTM D3951, unless overridden by DLA requirements. The unit of issue is each, delivered in a single unit under FOB origin terms with a 45-day delivery window after contract award. All shipments must be palletized and marked as specified, with the final destination being Camp Carroll in South Korea, under a RDD 999/NMCS shipment designation and governed by DLA procedural notes C19 and C20. The contract was issued under solicitation SPE8E7-26-Q-0282, with a response deadline in August 2026 and a delivery requirement to be fulfilled by July 7, 2026.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, INTAKE
Solicitation # SPE7LX-26-U-9236
This contract specifies the procurement of a filter element for an intake air cleaner, designated by NSN 2940-00-934-7989, with a requirement for 2,564 units under solicitation SPE7LX-26-U-9236. The item is classified as a critical application component used on a 3 KW, 1800 RPM diesel generator unit and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award dates depending on acquisition size. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the equipment, except for specific exemptions such as batteries, fluorescent lights, instruments, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. A list of approved part numbers from multiple qualified suppliers including Baldwin Filters, Donaldson, Cummins Filtration, WIX, and others is provided, ensuring sourcing flexibility while maintaining technical compliance. Delivery is required FOB origin within 62 days of contract award, with no variance allowed in quantity — exactly 2,564 units must be furnished. Inspection and acceptance occur at the destination, and packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, including the use of Unit of Issue code 001, preservation method 10, and marking in accordance with MIL-STD-129, with no special marking codes applied. Palletization must follow RP001 specifications, and all units must be properly labeled and prepared for transport. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 336390, with Theodore Misiolek listed as the primary point of contact for inquiries. The contract does not guarantee purchase of the estimated quantity by the IDC, and all items must be furnished without government identification if rejected.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
HANDBRAKE ASSY
Solicitation # SPE7L0-26-T-0394
The contract pertains to the procurement of two Handbrake Assemblies with NSN 2530-99-733-4747 under solicitation SPE7L0-26-T-0394, issued by the Department of Defense through the Land Supply Chain ESOC Buys office. Delivery is required within five days of award, with products to be shipped FOB origin and inspected and accepted at the destination. The units must be packaged according to DLA’s strict packaging standards—commercial packaging per ASTM D3951 if nonhazardous, or FED-STD-313-compliant packaging if hazardous, with all labeling and marking adhering to MIL-STD-129 and palletization following RP001 requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting commercial standards. The supply chain involves approved vendors including OLDBURY UK LTD, MOOG FERNAU LTD, and FP & S LTD, each with their respective part numbers. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. Shipments must be sent via the fastest traceable means, excluding parcel post, to the designated receiving location at Tobyhanna Army Depot, with a specific freight address and mark-for information. The contract mandates no variance in quantity—exactly two units must be delivered. The original required delivery date is April 22, 2026, with no need for a ship date currently specified. The contract references multiple technical and quality requirements identified by R and I numbers from the DLA Master List, which governs performance and compliance. The purchasing request number is 7017728712, with a unit price of $2.00 per item, totaling $4.00. The point of contact is Jeffrey Bloom, and the solicitation was posted on August 4, 2026, with responses due by August 17, 2026. All data, packaging, and delivery logistics are tied to government-specific identifiers including W90CGG, W25G1V, and the military freight code TCN W25G1V6107001Q.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7LX-26-U-9234
This contract is for the procurement of fluid filter elements identified as a commercial off-the-shelf item with the NSN 2940-01-567-4003 and an estimated quantity of 724 units. The item is sourced from multiple commercial manufacturers including JCB Inc., Deere & Company, Hitachi Construction Machinery, Vanderfield Pty Ltd DBA, Baldwin Filters Inc., Hastings Filters Inc., and Wix Corp., all of which produce equivalent part numbers such as AT468647, BT9422, HF1019, and WL10186. The contract falls under DLA Direct, CONUS coverage and requires delivery within 62 days FOB origin with zero percent quantity variance permitted. Inspection and acceptance occur at the destination point. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling and adhere to DLA Packaging Requirements for Procurement, including palletization standards outlined in RP001. The unit of issue is each, with a unit price of $724.00 for a total price of $524,576.00. The solicitation, numbered SPE7LX-26-U-9234, was issued as a Women-Owned Small Business Set-Aside under NAICS code 336390, with responses due by August 19, 2026. Primary point of contact is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
BRAKE, SHOE TYPE
Solicitation # SPE7L1-26-T-914H
The contract pertains to the procurement of one unit of a brake, shoe type, identified by NSN 2530-01-602-7974 and part number 82012-3, supplied by PDI GROUND SUPPORT SYSTEMS, INC. Delivery is required within five days of contract award, FOB origin, with no variance allowed in quantity and inspection and acceptance occurring at the destination. The item must comply with all DLA Master List of Technical and Quality Requirements, which override any conflicting specifications, including prohibitions against Class I ozone-depleting chemicals, requiring approved substitutes when necessary. Packaging must adhere to MIL-STD-129 for marking and labeling, and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if classified as hazardous under FED-STD-313, with palletization strictly following RP001 standards. The delivery address is the Marine Aviation Logistics Squadron 14 at CHERRY POINT NC, and shipment must use traceable means—parcel post is forbidden. The solicitation number is SPE7L1-26-T-914H, with a response deadline of August 17, 2026, and the original required delivery date is August 4, 2026. The contract is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)
Fabricated Structural Metal Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details