Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

BUSHING, SLEEVE

Active
SPE4A6-27-T-8282Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-27-T-8282 is issued by the DLA Weapons Support ASC Commodities Division for the procurement of 263 sleeve bushings under NSN 3120005855108. These items are designated as critical application items for The Boeing Company (P/N 66-9431) and must adhere to TDP Rev C Gen 3 and Reference QAP 13873 QAP-B02 Revision B. The delivery is required within 171 days, with a need ship date of May 3, 2027, and an original required delivery date of March 2, 2027. Shipping is FOB Origin, with the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict quality and packaging standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical requirements taking precedence. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331, where acceptance requires zero non-conformances. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and adherence to various FAR and DFARS clauses, including Buy American and Balance of Payments and safeguarding of covered defense information. Quotes must be submitted through the DLA Internet Bid Board System (DIBBS).

General Info

DLA solicitation for 263 critical sleeve bushings for Boeing, delivered by March 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332991 - Ball and Roller Bearing Manufacturing

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
Robye Dewitt
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BUSHING,SLEEVE
BUSHING,SLEEVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
IDENTIFY TO:
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N 66-9431
TDP Rev C Gen 3 IAW REFERENCE QAP 13873 QAP-B02 REVISION NR B DTD 12/11/2013
SPE4A6-27-T-8282
SECTION B
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018997921 0001 EA 263.000
NSN/MATERIAL:3120005855108
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:05/03/2027
SPE4A6-27-T-8282
SECTION B
PR: 7018997921 PRLI: 0001 CONT’D
Original Required Delivery Date:03/02/2027
SPE4A6-27-T-8282 NSN/Part Number: 3120-00-585-5108 Quantity: 263 EA Purchase Request: 7018997921QTY: 263 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-27-T-8297
Solicitation SPE4A6-27-T-8297 is a fixed-price procurement issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for 358 units of sleeve bearings and bushings, identified by NSN 3120-00-589-9414. This opportunity is set aside for HubZone small businesses, though other small businesses may be considered if no qualified HubZone offers are received. The required delivery date is June 11, 2027, with a delivery period of 171 days, and the place of performance is Anniston, Alabama. The contract mandates strict adherence to quality and technical standards, including SAE AS9003 or ISO 9001 compliance for manufacturer inspection systems. Inspection and acceptance will occur at the origin per FAR 52.246-2. Packaging must follow MIL-STD-2073-1E and RP001 requirements, specifically requiring each sleeve to be wrapped in neutral paper to prevent damage. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification. Additionally, the contract incorporates the Buy American and Balance of Payments Program and prohibits the use of mercury or mercury compounds in the hardware or packaging. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-27-T-8284
Solicitation SPE4A6-27-T-8284 is a request for quotations from the Defense Logistics Agency for the procurement of sleeve bushings, identified by NSN 3120006614251 and part number NAS77-4-018. The requirement consists of two line items totaling 311 units, with 94 units designated for delivery to DLA Distribution San Joaquin in Tracy, California, and 217 units for the DDSP New Cumberland Facility in Pennsylvania. The need ship date is May 3, 2027, with an original required delivery date of June 27, 2027. This is designated as a critical application item, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. The contract specifies that inspection and acceptance will occur at the origin. Quality assurance follows a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while palletization must follow DLA requirement RP001. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Invoicing is to be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 12, 2026, and a price evaluation preference is available for HUBZone Small Business Concerns.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-27-T-8288
Solicitation SPE4A6-27-T-8288 is a fixed-price contract issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of 490 units of thrust washer bearings, identified by NSN 3120-01-484-0447. The requirement specifies a delivery timeline of 171 days after order, with a need ship date of May 3, 2027, and a final required delivery date of August 3, 2027. Delivery, inspection, and acceptance are all set as FOB Origin, with the final shipping destination located in New Cumberland, Pennsylvania. The contract mandates strict adherence to quality and security standards, requiring manufacturers to maintain inspection systems compliant with SAE AS9003 or ISO 9001. Key technical requirements include packaging per ASTM D3951 and MIL-STD-129, and compliance with the DLA Master List of Technical and Quality Requirements. Security and regulatory obligations are significant, including CMMC Level 2 certification, ITAR and EAR export controls, and safeguarding of covered defense information. Additionally, the procurement incorporates the Buy American Act and Berry Amendment restrictions. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
Cylindrical Roller Bearing ManufacturerThis subcontract involves the manufacture and supply of 37 cylindrical roller bearings, identified by NSN 3110-00-079-1181, for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes precision machining and assembly conducted in strict accordance with Air Force Critical Safety Item protocols and the DLA Master List of Technical and Quality Requirements. To qualify for this project, the provider must maintain SAE AS9100 certification and ensure full compliance with the Berry Amendment and the Buy American Act. The contract is managed under NAICS code 332991 for the Department of Defense, with a response deadline set for November 12, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
Federal
THRUST SHOE W/INSTR
Solicitation # N0010427QTA17
Solicitation N00104-27-Q-TA17 is issued by Navsup Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of one Thrust Shoe w/Instr (NSN 7HH 3120-01-623-3046). The government requires a Repair Turnaround Time (RTAT) of 229 days, measured from the physical receipt of the asset to final government acceptance. Failure to meet this RTAT may result in price reductions per unit per month, implemented via a reconciliation modification. The award will be made to a single, technically acceptable offeror based on a best-value determination, with past performance as the primary evaluation factor via the DoD Supplier Performance Risk System (SPRS) and price as a secondary factor. Key operational requirements include mandatory Government Source Inspection (GSI) and strict adherence to MIL-STD-129 for marking and MIL-STD-2073 for packaging. All freight is FOB Origin and handled by the Navy per the Commercial Asset Visibility (CAV) Statement of Work. The contractor must ensure the material is mercury-free and comply with cybersecurity maturity model certification requirements. Invoicing and receiving reports must be processed electronically through Wide Area WorkFlow (WAWF). The procurement is issued under Emergency Acquisition Flexibilities, and the resulting award will be bilateral, requiring written acceptance by the contractor.
Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332991
New
Federal
31- BEARING, ROLLER, NEEDLE
Solicitation # SPE4A627RX186
DLA Aviation

POSTED

about 6 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
31--BEARING,ROLLER,CYLINDR
Solicitation # SPE4A6-27-T-8275
Solicitation SPE4A6-27-T-8275 is a fixed-price procurement issued by the Defense Logistics Agency (DLA) for the supply of 37 cylindrical roller bearings (NSN 3110-00-079-1181). This item is designated as an Air Force Critical Safety Item (CSI), requiring manufacturers to maintain a quality management system compliant with SAE AS9100 or an equivalent standard. Delivery is required within 171 days after the order, with a need ship date of May 3, 2027, and a final delivery destination of Tinker AFB, Oklahoma. Inspection and acceptance will occur at the point of origin. Offerors must submit quotes via the DIBBS portal and are encouraged to provide quantity ranges to accommodate potential demand volatility. Compliance with the Berry Amendment and the Buy American Act is mandatory, and any use of non-domestic materials must be disclosed. The contract mandates strict adherence to MIL-DTL-197M for packaging and MIL-STD-129 for marking. Additionally, contractors must utilize the Wide Area WorkFlow (WAWF) system for invoicing and are required to register through the Account Management and Provisioning System (AMPS) to access the Vendor Shipment Module (VSM). The solicitation also includes stringent requirements regarding the prohibition of covered telecommunications equipment and the safeguarding of covered defense information per DFARS 252.204-7012.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
Supplier of NSN 3110-01-391-8136This subcontract involves the procurement of 151 units of NSN 3110013918136 to support prime contractors fulfilling DLA supply contracts. The selected supplier is responsible for manufacturing or sourcing the parts to ensure they meet all technical specifications associated with the National Stock Number while adhering to strict domestic origin requirements. The agreement mandates full compliance with FAR 52.204-24 concerning the prohibition of certain telecommunications equipment. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract specifies delivery of the 151 units on a FOB Origin basis. Performance for this requirement is centered at Hill AFB. The opportunity was posted on November 3, 2026, with a response deadline of November 12, 2026, falling under NAICS code 332991.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
Solenoid Valve Repair Kit SupplierThis subcontract involves the sourcing and manufacture of four solenoid valve repair kits, specifically identified by NSN 4810-01-540-5689, to support prime contractors delivering maritime hardware for the Defense Logistics Agency. The selected supplier must ensure all items adhere to MIL-STD-2073-1E packaging data standards and deliver the kits FOB Destination to the USNS CESAR CHAVEZ T-AKE 14. Eligible providers are required to possess a valid CAGE code and UEI to participate. The opportunity is categorized under NAICS code 332991 and is managed through the Department of Defense. Interested parties must submit their responses by the deadline of November 16, 2026.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
Supply of Hydraulic Swivel Joint (NSN 4730016895293)This subcontract involves the procurement or manufacture of one Hydraulic Swivel Joint meeting NSN 4730016895293 specifications for the Department of Defense, specifically the DLA Weapons Support Maritime Supply Chain ESOC Buys. The selected provider must ensure the item is packaged according to RP001 DLA Packaging Requirements and marked in compliance with MIL-STD-129. The contract requires the provider to maintain an active SAM registration. Performance will take place in Fort Irwin, California, with a response deadline set for November 16, 2026. The project falls under NAICS code 332991 and is intended for prime contractors delivering DLA supply contracts.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
Manufacturer of Inner Bearing Rings (NSN 3110-01-434-0579)This subcontract involves the manufacture and supply of five inner bearing rings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be produced according to Drawing L43720 and NSN 3110-01-434-0579, utilizing precision machining and grinding to meet strict aerospace tolerances. All deliverables must be packaged and marked in accordance with established military standards. Qualified providers must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with ITAR/EAR regulations and NIST SP 800-171 cybersecurity standards. The performance of this contract is centered in San Diego, California, with a response deadline set for November 12, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
Supply of Roller Bearings (NSN 3110016757324)This subcontract involves the supply of four roller bearings meeting NSN 3110016757324 specifications for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing the bearings and ensuring all deliverables are handled according to strict military standards, including preservation and packaging per MIL-DTL-197M, marking per MIL-STD-129, and packaging data per MIL-STD-2073-1E. Delivery is required FOB Origin. Compliance and security are critical components of this agreement, requiring the contractor to maintain a CMMC Level 2 self-assessment and adhere to DFARS 252.204-7012 regulations. The opportunity falls under NAICS code 332991 and is managed by the Department of Defense. Interested parties must have submitted their responses by the November 12, 2026, deadline.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 488410
New
DIBBS
MIL-SPEC Packaging and Fragile Logistics ServicesThis subcontract for MIL-SPEC Packaging and Fragile Logistics Services involves providing specialized packaging for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the secure packaging of optical components in strict accordance with MIL-STD-2073-1E and RP001 standards, requiring the use of MIL-SPEC anti-static, shock-absorbent, or moisture-barrier materials and the application of fragile marking code 01. The contractor is responsible for coordinating the delivery of shipment-ready, compliant packages to the USS George Washington (CVN 73) at FPO AP 96607. This requirement falls under NAICS code 488410 and is managed by the Department of Defense.
Motor Vehicle Towing

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
Precision Optical Lens Fabrication (NSN 6210-01-460-6632)This subcontract involves the manufacture and supply of a single precision light lens for the DLA Weapons Support ASC Commodities Division under NSN 6210-01-460-6632. The contractor is required to fabricate the optical lens to exact government specifications using precision grinding and polishing techniques, with a strict prohibition on the use of additive manufacturing. To qualify, the provider must maintain SAE AS9003 or ISO 9001 quality systems and hold certification from the US/Canada Joint Certification Program. Additionally, the contractor must ensure full compliance with ITAR or EAR export controls. The project is categorized under NAICS code 332994 and requires performance at FPO 96607.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 334418
New
DIBBS
Special Purpose Electrical Cable Assembly SupplierThis subcontract opportunity is for a supplier to provide four units of special purpose electrical cable assemblies, specifically NSN 5995017291083, to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider must manufacture or source these assemblies in strict accordance with the DLA Master List of Technical and Quality Requirements and adhere to DFARS Buy American standards. To be eligible, the supplier must maintain a quality system compliant with either SAE AS9003 or ISO 9001. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026, falling under NAICS code 334418.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and International Freight ForwardingThis subcontract involves providing specialized military packaging, marking, and international freight forwarding services for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for preparing a cable assembly according to MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items are correctly marked and packaged for secure transport. The scope of work includes coordinating FOB Origin transportation and managing all necessary customs documentation for final delivery to Spangdahlem Air Base in Germany. To be eligible, the provider must have experience with WAWF invoicing and the capability to manage logistics through to the destination inspection point.
Freight Transportation Arrangement

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
Manufacture and Supply of RF Cable Assembly (P/N 583R094H44)This subcontract involves the manufacture and supply of one completed and tested Radio Frequency Cable Assembly for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor is responsible for fabricating the assembly according to Northrop Grumman part number 583R094H44 specifications and adhering to the DLA Master List of Technical and Quality Requirements RA001. Quality assurance is a critical component of the agreement, requiring sampling and inspection performed in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contractor must maintain a CMMC Level 2 self-assessment to meet security requirements. The opportunity is categorized under NAICS code 335999 and was posted by the DLA Weapons Support ASC Commodities Division.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
Electrical Component & Wire SupplyThis subcontract for Electrical Component and Wire Supply supports the DLA Weapons Support ASC Commodities Division within the Department of Defense. The scope of work involves sourcing and delivering raw materials and specialized components, specifically Mil-Spec wire, terminals, connectors, and heat shrink tubing, in strict accordance with Drawing 53711 8690753 Revision A. All materials must be delivered to the prime manufacturer and accompanied by Certificates of Conformance to ensure quality and specification adherence. A critical requirement of this agreement is full compliance with the Buy American Act for all sourced components. The project is categorized under NAICS code 335999, with the place of performance located in Hampton, Virginia. Interested parties should note the response deadline of November 12, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
Custom Wiring Harness FabricationThis subcontract involves the fabrication of a custom wiring harness, specifically the Bran model with NSN 5995-01-690-7408, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the assembly of the harness according to Basic Drawing 53711 8690753 Revision A, encompassing all necessary wire cutting, stripping, crimping, and electrical continuity testing to ensure full functionality. The project mandates strict adherence to quality and security standards, including MIL-STD-2073-1E, MIL-STD-129, and NIST SP 800-171. The final deliverable consists of one completed, packaged, and marked wiring harness to be performed in Hampton. Interested parties must respond by November 12, 2026, under NAICS code 335931.
Current-Carrying Wiring Device Manufacturing

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 334418
New
DIBBS
Supply of Power Cable Assemblies (NSN 5995-01-729-2713)This subcontract involves the supply of four electrical power cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing assemblies that strictly adhere to NSN 5995-01-729-2713 specifications. Quality assurance must be maintained through sampling and inspection conducted per MIL-STD-1916 or ASQ H1331, with all product markings applied in accordance with MIL-STD-129. The agreement requires full compliance with DFARS 252.225-7001 regulations. This procurement falls under NAICS code 334418 and is managed by the Department of Defense. Interested parties must note the response deadline of November 12, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 334418
New
DIBBS
Special Purpose Electrical Cable Assembly SupplierThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the supply of two special purpose electrical cable assemblies for prime contractors. The supplier is responsible for the manufacture or procurement of L3Harris part number 12282-0710-A006, ensuring that all units undergo quality assurance sampling in accordance with MIL-STD-1916 or ASQ H1331 standards. The contractor must provide all necessary documentation for covered defense telecommunications equipment as mandated by FAR requirements. Performance for this contract is located at Schofield Barracks, and the procurement falls under NAICS code 334418.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 333241
New
DIBBS
Manufacturer of Thrust Washer Bearings (NSN 3120-01-484-0447)This subcontract involves the manufacture and supply of 490 Thrust Washer Bearings under NSN 3120-01-484-0447 for prime contractors supporting DLA Weapons Support ASC projects. The selected provider must ensure all items are precision manufactured, marked according to RQ017 standards, and packaged in compliance with ASTM D3951 and MIL-STD-129. The final products are to be delivered FOB Origin to New Cumberland, Pennsylvania. To qualify for this contract, the manufacturer must maintain either SAE AS9003 or ISO 9001 quality systems and hold CMMC Level 2 certification. The opportunity is categorized under NAICS code 333241 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.
Food Product Machinery Manufacturing

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the processing of critical bearing components, specifically 26 units of bearing retainers and rollers, ensuring full compliance with MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129 standards. The contractor is responsible for utilizing specialized marking equipment to meet regulatory requirements and managing shipping documentation through the Wide Area Workflow system. All completed units are to be delivered to Norfolk, Virginia. The project falls under NAICS code 488510 and is managed under the Department of Defense.
Freight Transportation Arrangement

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
Precision Manufacturing of Bearing Retainers and RollersThis subcontract involves the precision manufacturing of 26 bearing retainers and rollers for the DLA Weapons Support ASC Commodities Division. The components must be produced in strict accordance with drawings 76301 ST4M151, 76301 ST4M162, and 98752 200415485, while adhering to quality assurance reference QAP 13873 QAP-B02. Performance of the contract will take place in Norfolk. Eligible contractors must possess precision machining equipment and hold either SAE AS9003 or ISO 9001 certification. Additionally, the provider must be certified under the US/Canada Joint Certification Program. The solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026.
Mechanical Power Transmission Equipment Manufacturing

POSTED

34 minutes ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS