Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE ASSEMBLY, CONTROL

Active
SPE4A726R-700Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through DLA Aviation, is seeking proposals for a Cable Assembly, Control, identified by NSN 1680-01-321-6778 and 1000236575, under an indefinite quantity contract with a five-year base period and a total term of 60 months. The contract is designated as an unrestricted other-than-full-and-open procurement, with estimated annual quantities of 40 units, and delivery is required within 195 days of award. The item is classified as a configuration control and critical application component, and manufacturing must comply with NAICS code 336413. FOB origin applies, and inspection and acceptance will occur at the point of origin. The Government will provide limited specifications, plans, or drawings, and export control drawings are not applicable. Offerors must complete and submit the full solicitation document to be considered, and submissions must be made via the DLA Internet Bid Board System (DIBBS) after its issuance on or about July 31, 2026, with a proposal deadline of August 31, 2026. Potential suppliers include Transdigm, Inc., Lockheed Martin Corp., Lockheed Martin Aeroparts, and Derco Aerospace, Inc. Evaluation will consider price, past performance, and other factors as outlined in the solicitation. Supplier Performance Risk System (SPRS) data will be used in the award decision. The point of contact for inquiries is Renee Griffin, reachable at renee.griffin@dla.mil.

General Info

DLA Aviation seeks 40 yearly cable assemblies under 5-year contract, FOB origin, deadline August 31, 2026.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

VA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Aviation
Contacts1 person available
OfficeRICHMOND, VA, 23237, USA
Organization / Agency
Department Of Defense → DLA Aviation
View Agency Profile
Office AddressRICHMOND, VA, 23237, USA
Contacts
Renee Griffin
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

Solicitation for End Item: C-130 Aircraft, Cable Assemby, Control, NSN: 1680-01-321-6778, 1000236575. TERM OF THE CONTRACT: 60 MONTHS. DELIVERY SCHEDULE 195 DAYS ARO. Configuration Control item. Critical Application item. NAICS is 336413. This is an unrestricted other than full and open procurement. Potential Sources: Transdigm, Inc., CAGE 04638; Lockheed Martin Corp. CAGE 98897; Lockheed Martin Aeroparts, CAGE 0A489; Lockheed Martin Corp., CAGE 563JJ; Derco Aerospace, Inc., CAGE 8X044. FOB Origin, Inspection/Acceptance: Origin. This is a request for proposal for an Indefinite Quantity Contract. Estimated Annual Quantities for the 5-year base period will be 40 each. Export Control drawings do not apply. Limited specifications, plans, or drawings relating to the procurement described will be furnished by the Government. Request is for a written proposal. OFFERORS MUST COMPLETE A COPY OF THE SOLICITATION IN ORDER TO BE CONSIDERED FOR AWARD. A copy of the solicitation will be available via the DLA Internet Bid Board System (DIBBS) at https://www.dibbs.bsm.dla.mil/rfp on the issue date cited in the solicitation.  The solicitation will be issued on or about July 31, 2026. All responsible sources may submit an offer, which will be considered. Supplier Performance Risk System (SPRS) applies. The final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation.  POC: Renee Griffin; Email address: renee.griffin@dla.mil.

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
GASKET AND SEAL SETThe contract is for a Gasket and Seal Set with NSN 1680-01-732-8787, quantity of 455 units, at a unit price of $455.00, for a total contract value of $206,975. The item is classified as a critical application item for aviation and electronic systems, requiring compliance with stringent technical and quality standards. Delivery is scheduled for 66 days after award, with FOB origin terms and zero variance allowed on quantity. Inspection and acceptance occur at origin, with packaging mandated to meet ASTM D3951 standards, unless superseded by any DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must conform to MIL-STD-129, and palletization must adhere to RP001 DLA Packaging Requirements. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are to be verified using specified AQL levels. Configuration changes require an Engineering Change Proposal or Request for Variance, and government identification must be removed from non-accepted items. The seller must comply with Cybersecurity Maturity Model Certification Level 2 requirements, and documentation for source approval must be submitted per RC001. The contract is a total small business set-aside under NAICS 336413, with a response deadline of July 22, 2026. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation is governed by DLA Procurement Notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
BELL CRANKThe contract solicitation is for a Bell Crank part identified by NSN 1680-01-155-6036, with a requested quantity of three units. The solicitation number is SPE4A5-26-T-269P, issued by the Defense Logistics Agency under the Department of Defense, and was posted on June 30, 2026. Responses are due by July 8, 2026, and the procurement is structured as a federal solicitation with no specific set-aside designation. The place of performance and office address details are not specified beyond the United States, and no point of contact information is provided within the available data. The solicitation can be accessed via the DIBBS platform using the provided UI link.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURALThe contract under solicitation number SPE4A7-26-T-564P requires the supply of eight units of a structural support item identified by NSN 1560-01-549-8284, with delivery due within 30 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, while unspecified attributes are treated as major. Zero non-conformances are required in sampled lots unless otherwise stated. Inspection and acceptance must occur at the origin, and any configuration changes require formal Engineering Change Proposals or variance requests. Measuring and test equipment used must comply with established standards. Technical data associated with this item is subject to export controls under ITAR or EAR, and its dissemination is restricted to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Unauthorized disclosure to foreign nationals, including those within the U.S., is prohibited. The place of performance is Tinker AFB, Oklahoma, with primary point of contact at the Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
PARTS KIT, CARTRIDGEThe contract is for a Parts Kit, Cartridge with part number C5746-75K and NSN 1650-00-442-8055, supplied by CAGE 70236 TACTAIR FLUID CONTROLS. This is a critical application item subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The product must be inspected and accepted at origin using zero-based sampling per MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E Appendix D for kits, requiring all components to be secured in a single box with adequate cushioning to prevent movement and damage, accompanied by a detailed contents list. Marking must conform to MIL-STD-129 with no special marking codes, and palletization must follow DLA packaging requirements. Delivery is FOB origin, with no quantity variance allowed, and the full order of seven units must be delivered within 171 days to the DLA Distribution facility in New Cumberland, PA. The contract includes provisions for removal of government identification from non-accepted supplies and applies covered defense information controls. The solicitation was issued on July 17, 2026, with a response deadline of July 22, 2026, and the required delivery date is June 20, 2027.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
Federal
MANIFOLD ASSEMBLY,H
Ok DLA Aviation At Oklahoma City

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
LINING,FRICTIONThis solicitation, issued by DLA Aviation at Philadelphia under solicitation number SPRPA126QUB42, seeks friction lining supplies under NAICS code 336413 with a response deadline of August 17, 2026. All offerings must consist of newly manufactured parts only; refurbished, remanufactured, or repaired materials are explicitly prohibited and will render an offer technically unacceptable. Suppliers must be government-approved sources, and distributors must submit an authorized distributor letter on the original manufacturer’s letterhead at the time of proposal submission. The items are Foreign Military Sales (FMS) assets fully owned by foreign customer nations, delivered through a U.S. freight forwarder to the designated country without ever entering the U.S. Department of Defense supply chain. As such, Item Unique Identification and Valuation requirements under DFARS 211.274 are not applicable because the U.S. Government never assumes ownership or control of these assets. All components must be FAA-certified with a valid FAA Form 8130-3 Airworthy Approval Tag, and Critical Safety Items are subject to DFARS 252.209-7010. Government inspection will occur at the supplier’s facility under DLAD 52.?-9004, and Contractor Business Systems may apply as relevant. The Buy American Act and Free Trade Agreements certification requirements are in effect, and small business subcontracting obligations are mandated with Maura Scanlon designated as the point of contact for compliance and inquiries. Warranty coverage is twelve months from date of acceptance or forty-five days after discovery of defect, whichever is later. Offers must comply with security restrictions, equal opportunity provisions for veterans and workers with disabilities, and specific payment and workflow instruction protocols as outlined in the contract clauses. No drawings are available; offers are based solely on supplied technical information.
Pa DLA Aviation At Philadelphia

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
Pump-Motor, Windshield
Aviation Logistics Center (ALC)(00038)

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
Federal
Purchase of 5G Bandpass FilterThis solicitation requests quotations for 30 units of a 5G Bandpass Filter, part number 68013467-001, with National Stock Number 5915-01-HS3-8048, manufactured by Honeywell International under Cage Code 22373. The procurement is strictly a 100% small business set-aside under NAICS code 336413, with a small business size standard of 1,250 employees, and all offered items must be new, genuine parts directly traceable to the original equipment manufacturer with full documented audit trails. The contractor is required to submit a Certificate of Conformance in the format specified by FAR clause 52.246-15, and no drawings, specifications, or schematics are provided by the agency. Offers must be submitted via email to the designated points of contact by 12:00 PM Eastern Time on July 22, 2026, with the solicitation number included in the subject line. Award is anticipated around July 30, 2026, and will be made on a firm-fixed price basis following competitive evaluation as outlined in the attached Terms and Conditions and Schedule documents. All submissions must comply fully with the requirements set forth in this solicitation, and only the items explicitly listed will be considered for award. The contract is administered by the Aviation Logistics Center under the Department of Homeland Security, with performance to be executed in accordance with the Revolutionary FAR Overhaul provisions effective April 27, 2026.
Aviation Logistics Center (ALC)(00038)

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
Federal
Amendment-0001 -FD20302600725_ FA8118-26-R-0047 Reman F-15 Safety Relief Valve
FA8118 Afsc Pzabb

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
Overhaul of Pumps and Valves
Aviation Logistics Center (ALC)(00038)

POSTED

about 20 hours ago

DEADLINE

in 16 days
View Details
NAICS: 336413
New
Federal
F-35 HOTASThe solicitation seeks commercial supply of F-35 Simulation Hands on Throttle and Stick Systems (HOTAS) for Edwards AFB under a full small business set-aside, with the NAICS code 336413 and a size standard of 1,250 employees. The acquisition follows Simplified Acquisition Procedures and is conducted as a Request for Quote without a written solicitation, using the SF1449 form and a separate PDF quote for full compliance. All submissions must be emailed to two designated government points of contact, with a maximum file size of 10MB, and oral offers are not accepted. The quote must include complete contractor information such as SAM UEI, TIN, CAGE code, pricing, warranty, delivery terms, FOB destination, and a technical approach demonstrating compliance with the Statement of Requirements. Price and technical acceptability are the sole evaluation factors, with award determined by the Lowest Price Technically Acceptable method, meaning the lowest-priced offer that meets all technical requirements will be selected without discussions unless the government determines otherwise. The period of performance is 160 days after award, and all quotes must be submitted by 9:00 AM Pacific Daylight Time on July 20, 2026, with questions due by July 15, 2026 at the same time. The contract will be awarded under FAR 52.212-1, -2, and -4, incorporating standard commercial product terms and conditions, and the government reserves the right to evaluate only the lowest-priced offer or consider additional submissions if necessary. The offeror’s quote must be fully responsive to meet the technical specifications of the F-35 HOTAS as defined in the attachments, and failure to provide complete information will render the submission non-responsive. The solicitation is issued under federal acquisition rules through Federal Acquisition Circular 2025-06, DFARS Change 10/24/2025, and DAFAC 2024-1016, with payment terms assumed to be NET 30 unless otherwise specified. No DPAS rating applies, and no additional contract terms beyond those cited are required.
FA9302 Aftc Pzz

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
Federal
SPE4A526R0268; 1650010462787; Slide, DirectionalThe U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking information on potential manufacturers capable of producing the item with NSN 1650-01-046-2787, identified as a Slide Directional. This request is strictly for market research and informational purposes and does not constitute a solicitation, request for proposal, or any form of government commitment. Respondents are encouraged to provide the name of the manufacturer, their city and state location, and a point of contact, all to be submitted to Annette Pruett at Annette.pruett@dla.mil. No funds are available to cover the cost of preparing responses, and all submissions are voluntary with no expectation of award or payment. The solicitation number is SPE4A526R0268, posted on July 17, 2026, with responses due by July 21, 2026, and the NAICS code associated with this requirement is 336413. The contracting office is based in Richmond, Virginia, and the place of performance is also listed in Richmond, Virginia.
DLA Aviation

POSTED

about 20 hours ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

NAICS: 336413
New
Federal
FILTER ELEMENT, FLUIDThe contract seeks proposals for the procurement of Filter Element, Fluid, NSN 1650-01-553-0426, intended for use on F-15 Aircraft, under an Indefinite Quantity Contract with a six-year term. The estimated annual requirement is 1,880 units over the five-year base period, with an initial delivery schedule of 246 days after contract award. This is a configuration control and critical application item, classified under NAICS code 336413, and is being procured as an unrestricted other than full and open competition, with Pall Aeropower Corp. identified as a potential source. Delivery is FOB Origin, and acceptance will occur at destination. No government-provided specifications, plans, or drawings are available, and export control drawings do not apply. Offerors must submit a completed copy of the solicitation to be considered, and proposals must be submitted via the DIBBS portal by the deadline of August 31, 2026. The solicitation was issued on July 31, 2026, and is open to all responsible sources. Evaluation will consider price, past performance, and other factors as outlined in the solicitation, with the Supplier Performance Risk System (SPRS) used to assess vendor reliability. The point of contact is Renee Griffin at the DLA Aviation office in Richmond, Virginia.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334416
New
Federal
NSN: 6685-01-698-2840, SENSOR, AMBIENT TEMP, WSDC: JDN, ARLEIGH BURKE CLASS DDGThe contract is a Firm Fixed Price, Indefinite Quantity Contract with a five-year base term and no option periods, awarded as a Total Small Business Set-Aside under NAICS code 334416 for Sensor, Ambient Temp with NSN 6685-01-698-2840. The minimum guaranteed quantity is 14 units over the contract period, with a maximum cap of 80 units, and an estimated annual requirement of 54 units. Deliveries must be made to DLA stock locations on the east and west coasts under FOB Destination terms with Inspection and Acceptance at origin, and the item is subject to export control and heightened quality standards. Surge requirements are excluded, and the requested delivery schedule is 230 DARO. The solicitation will be issued on or about August 7, 2026, via the DLA Internet Bid Board System, with no paper copies available and no reverse auction conducted. Proposals must be submitted by August 3, 2026, and the award will consider price, past performance, and other factors outlined in the solicitation. The point of contact is Danisha Wright at DLA Aviation in Richmond, Virginia.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 17 days
View Details
NAICS: 332911
New
Federal
VALVE AND YOKE, PILOThe solicitation seeks proposals for the Valve and Yoke, Pilo, identified by NSN 2915-01-051-3748, under an indefinite quantity contract with a five-year base period, during which an estimated 80 units will be required annually. The contract term spans 60 months, with delivery scheduled to commence within 466 days after award, and all items are subject to Government Factory Acceptance Test and Government Product Limitation Testing. This is a critical application item subject to export control and configuration control, with limited technical data provided by the Government. The NAICS code is listed as 332911, and the procurement is unrestricted and not conducted through full and open competition, with Ontic Engineering & Mfg. Inc. identified as a potential source. FOB destination terms apply, and inspection and acceptance occur at origin. Offerors must submit a complete copy of the solicitation to be considered, and proposals must be submitted via the DIBBS system prior to the August 31, 2026 deadline. The award will consider price, past performance, and other evaluation criteria as outlined in the solicitation, with the Supplier Performance Risk System informing assessment. The point of contact for inquiries is Renee Griffin, reachable at renee.griffin@dla.mil.
Industrial Valve Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
SENSING ELEMENT, FIRE DETECTOR SYSTEMThe contract solicitation is for the procurement of a Sensing Element, Fire Detector System with NSN 6340-01-317-1209 under an indefinite quantity contract for a five-year term, with a delivery schedule of 537 days after order award. This is a configuration control and critical application item with a NAICS code of 334511, and the procurement is classified as an unrestricted other than full and open competition, with Meggitt Safety Systems, Inc. identified as the potential source. All offers must be submitted in writing via a completed solicitation available through the DLA Internet Bid Board System on or about July 31, 2026, with proposals due by August 31, 2026. Delivery is FOB origin, and inspection and acceptance occur at origin; no government-provided specifications, plans, or drawings are available. Estimated annual quantities are 40 units over the base period, and export control drawings do not apply. The award will be based on a combination of price, past performance, and other criteria outlined in the solicitation, with the Supplier Performance Risk System (SPRS) factored into evaluation. The procuring activity is the Department of Defense through DLA Aviation, based in Richmond, Virginia, and inquiries should be directed to Renee Griffin at renee.griffin@dla.mil.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
FAIRING BACK/AIRCRAFT SEAT BACK CUSHION/AIRCRAFT SEAT CUSHION
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332994
New
Federal
53--MOUNT,RESILIENT,WEAPONThe U.S. Department of Defense, through the Defense Logistics Agency Aviation, is soliciting quotes for 5,447 units of NSN 5342013717973, a resilient weapon mount, to be delivered to DLA Distribution by contract delivery date 0193 days after award. This procurement is being conducted as a simplified acquisition under an RFQ, with all responses required to be submitted electronically and no hard copies available. The solicitation is restricted exclusively to small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, and the NAICS code 332994 applies to this requirement. The response deadline is July 19, 2026, with the solicitation published on July 17, 2026, and available solely through the SAM.gov website. All responsible small business suppliers are invited to submit competitive quotes, provided they meet the timing and electronic submission requirements. Contractual details, including digital drawings and military specifications, can be accessed electronically via the provided links or through the DIBBS portal using the solicitation number SPE4A775. The point of contact for inquiries is listed via email, with all correspondence directed to the buyer specified in the solicitation document. The office managing this procurement is located in Richmond, Virginia, and performance location details are not specified.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
Federal
SPE4A726R0715-011532314-CYLINDER ASSEMBLY,AThe Defense Logistics Agency is conducting market research to identify qualified industries capable of manufacturing the Cylinder Assembly, A, identified by NSN 1650-011532314 and part number 1168960-507. The requirement calls for full new manufacture including component procurement, inspection, testing, preservation, packaging, and shipping, with additional responsibilities spanning supply chain management, production forecasting, procurement of long-lead items, and addressing diminishing manufacturing sources and material shortages. The estimated annual need is 92 units, and unit pricing will be determined upon contract award. This effort is classified under NAICS code 336413 and is being managed by the DLA Aviation office in Richmond, Virginia, with no set-aside provisions applied. Responses are due by July 24, 2026, and the outcome will inform the subsequent procurement strategy. Interested parties must possess the infrastructure and expertise to independently execute all aspects of production and logistics for this critical aerospace component. The point of contact for inquiries is April Reed, reachable via email or phone, and all submissions must be directed through the official SAM.gov portal referenced in the posting. The place of performance is unspecified beyond Virginia, and contractors are expected to handle end-to-end delivery of conforming assemblies to meet military requirements. This synthesis of technical, logistical, and supply chain demands highlights the need for experienced manufacturers with proven capabilities in defense-grade component fabrication.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332439
New
Federal
81--COVER,SHIPPING AND STOThe U.S. Department of Defense, through DLA Aviation, is soliciting quotes for 143 units of NSN 8140015933819, labeled as COVER, SHIPPING AND STO, with an approved source of 18565 13658034 in tan color. The requirement is to deliver all items to W1A8 DLA DISTRIBUTION, with a lead time of 323 days after order placement. This procurement is issued as a Request for Quote under solicitation number SPE4A526Q0589 and is open to all responsible sources; no hard copies of the solicitation are available, and technical specifications, plans, or drawings are not provided. Quotes must be submitted electronically and received by the deadline of July 26, 2026, with no set-aside designation applied. The solicitation was posted on July 17, 2026, and the NAICS code 332439 applies. All inquiries must be directed via email to DibbsBSM@dla.mil, with further details accessible through the SAM.gov link or the DIBBS website by entering the solicitation number.
Other Metal Container Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
Federal
15--TRACK,FORWARD,DOORThe contract solicitation is for the procurement of three forward door tracks and four additional forward door tracks, identified by NSN 1560001054454, to be delivered to DLA Distribution Warner Robins within 317 days after award. The solicitation, numbered SPE4A726Q0849, is a combined RFQ posted on July 17, 2026, with a response deadline of July 21, 2026, and is open to all responsible sources without set-aside restrictions. The item falls under NAICS code 336413 and is managed by the Department of Defense’s DLA Aviation office located in Richmond, Virginia. Quotations must be submitted electronically, and no hard copies of the solicitation are available; all technical documentation including digitized drawings and military specifications must be accessed online through the provided SAM.gov link or via the DIBBS portal by entering the solicitation number. Inquiry questions should be directed via email to the designated primary point of contact listed in the solicitation document.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336412
New
Federal
Cutback shroud replacements, T64 SIO Contract SPE4AX19D9400
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
16--DUCT ASSEMBLY,AIR CThe U.S. Department of Defense through DLA Aviation is seeking quotes for the procurement of 40 units of NSN 1660007995861 DUCT ASSEMBLY,AIR C, with 39 units to be delivered to DLA Distribution Depot Oklahoma within 999 days after award and one unit to be delivered within 270 days after award. This solicitation, identified as SPE4A7726Q0848, is a total small business set-aside under FAR 19.5, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 336413 covering aircraft propulsion system and engine parts manufacturing. Responses must be submitted electronically before the deadline of July 29, 2026, and are open to all responsible sources that meet eligibility criteria. The contract is managed by the Office of DLA Aviation located in Richmond, Virginia, with all inquiries directed to the designated point of contact via email. There is no specified place of performance beyond the delivery destinations listed, and the solicitation document can be accessed through the SAM.gov workspace or the DIBBS website using the provided solicitation number.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details