Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Cable Assembly Manufacturing and Testing

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture, testing, and delivery of military-spec cable assemblies that strictly adhere to Department of Defense standards, including MIL-STD-1916 for sampling procedures and zero-defect quality criteria. All products must meet the technical and compliance requirements established by the Defense Logistics Agency, ensuring full interoperability and reliability in military applications. The work is classified as a subcontract under NAICS code 334310, indicating precision manufacturing of electrical components, and the place of performance is designated as FPO 96616, suggesting operations may support overseas or deployed military units. The solicitation was posted on July 29, 2026, with a firm response deadline of August 6, 2026, under the ASC Commodities Division of the Department of Defense. There is no set-aside designation, meaning all eligible contractors may compete without preference restrictions. While specific performance metrics or volume targets are not detailed, the zero-defect requirement implies rigorous quality control, documentation, and inspection protocols must be integrated throughout the production lifecycle. Successful bidders will be expected to demonstrate proven capability in producing high-reliability cable assemblies for defense systems, with compliance to military specifications being non-negotiable.

General Info

Manufacture and deliver zero-defect military cable assemblies to DOD standards by August 6, 2026, for FPO 96616.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334310 - Audio and Video Equipment ManufacturingView NAICS

Place of Performance

FPO, AP, 96616, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, test, and deliver military-spec cable assemblies compliant with DLA requirements, MIL-STD-1916 sampling, and zero-defect criteria.

Similar Contracts

Same NAICS industry code

High Speed Camera

Solicitation # W911S226U3890

The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is soliciting proposals for a High Speed Camera under a Small Business Set Aside, total, as indicated by NAICS code 334310, which classifies the procurement within the Imaging and Photographic Equipment Manufacturing category. The solicitation, identified by number W911S226U3890, was posted on July 30, 2026, with a firm response deadline of August 6, 2026, at 6:35 PM Eastern Time. Proposals must be submitted by this date to be considered, and the contract is structured as a combined solicitation, meaning it may integrate acquisition approaches for both supply and service requirements. The primary point of contact for inquiries is Gregory Bissey, reachable via email at gregory.j.bissey.civ@army.mil or by phone at 5206936006, and the official office is located at Fort Drum, New York, 13602-5220. While the place of performance is listed with a ZIP code of 31905, the specific location details are not fully defined in the data, suggesting potential flexibility or further clarification in the full solicitation documents. This opportunity is restricted exclusively to small businesses as part of a federal set-aside program designed to promote small business participation in defense contracting.

W6QM Micc-Ft Drum

POSTED

about 19 hours ago

DEADLINE

Giant Voice Enhancement Hill AFB

Solicitation # FA820126Q0031

This is a Firm-Fixed-Price, Total Small Business Set-Aside solicitation for the turn-key enhancement of the Giant Voice Emergency Mass Notification System at Hill Air Force Base, Utah, under solicitation number FA820126Q0031 and NAICS code 334310. The work involves engineering, furnishing, installing, and testing a system upgrade that includes four 16-horn speaker stacks, one Motorola repeater, and a single horn at each of the three base entry gates. All equipment must be exclusively SiRcom and Motorola branded and must fully comply with the performance requirements outlined in the Statement of Objectives. Proposals are evaluated using a Lowest Price Technically Acceptable (LPTA) process, where technical acceptability serves as a pass/fail gate requiring compliance with all SOO specifications including installation standards per UFC 4-021-01, software conformity, and inclusion of all deliverables such as project plans, as-built drawings, equipment manuals, firmware, licenses, and training. Failure to meet these minimum requirements renders a proposal unacceptable and ineligible for award regardless of price. The period of performance is 365 days, commencing September 30, 2026, and concluding September 29, 2027, with CLIN 0001 covering materials and CLIN 0002 covering installation, each to be completed within their respective delivery timelines of 120 and 365 calendar days from award. Performance and delivery are to occur at Hill AFB, UT, with FOB Destination terms applying. Proposals must be submitted electronically no later than 2:00 p.m. MDT on August 7, 2026, to both the Contracting Specialist and Contracting Officer, with the solicitation number included in the email subject line. Offerors must be registered in the System for Award Management (SAM) at the time of submission and comply with multiple FAR and DFARS clauses covering procurement integrity, cybersecurity, labor standards, biobased and recovered material certifications, and prohibitions on covered telecommunications equipment. Contract administration requires electronic invoicing through WAWF using specified DoDAACs, and the contractor must provide a one-year warranty covering all costs of diagnosis, travel, and repair following Government acceptance. A mandatory site visit is scheduled for July 29, 2026, and all technical questions must be submitted by July 3

FA8201 Afsc Ol H Pzio

POSTED

about 19 hours ago

DEADLINE

59--ADAPTER,HEADSET

Solicitation # SPE7M526T362X

The U.S. Department of Defense through DLA Land and Maritime is seeking quotes for 144 units of NSN 5965016976622, an Adapter, Headset, with an approved source identified as 71483 40619G-05. The procurement is conducted under solicitation number SPE7M526T362X, issued as a Request for Quotation with no hard copy available; all submissions must be made electronically. The opportunity is open to all responsible sources, and responses must be received by the deadline of August 10, 2026. Delivery is required to DLA Distribution at W1A8 within 186 days after order placement. The NAICS code for this procurement is 334310, indicating classification under communication equipment manufacturing. The award will be managed from the office located in Columbus, Ohio, and inquiries must be directed via email to the designated point of contact listed in the solicitation. No technical specifications, plans, or drawings are provided, and all details are contained within the electronic solicitation document accessible through the SAM.gov link.

DLA Land And Maritime

POSTED

about 19 hours ago

DEADLINE

Procurement and Supply of Electric Dummy Load (NSN: 5985015245383)The contract calls for the supply, packaging, labeling, and delivery of nine units of electric dummy load conforming to the military National Stock Number specification 5985015245383. All work must adhere to the technical and quality requirements mandated by military standards, ensuring full compatibility and operational readiness for defense applications. The items are to be packaged and labeled in accordance with military logistics protocols to facilitate seamless integration into the supply chain. The contract is classified as a subcontract under NAICS code 334310, indicating it involves the manufacturing of electronic components. Performance must be delivered to the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, giving potential vendors approximately two weeks to submit proposals. The contracting activity falls under the Department of Defense, specifically the Active Devices Division, which oversees specialized electronic equipment procurement. While no point of contact is listed, the official solicitation details can be accessed through the DIBBS portal using the provided link.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Safety-Critical Electromechanical Component ManufacturingThe contract requires the manufacture and delivery of 139 precision electromechanical trip mechanisms designed for light and safety applications, with strict adherence to military packaging, marking, and hazardous materials handling standards. Each unit must meet rigorous defense specifications to ensure operational reliability and safe transportation, reflecting the critical nature of the component in military systems. The work is classified as a subcontract under NAICS code 334310, indicating specialized electronic component manufacturing, and is being procured by DLA Dist San Joaquin on behalf of the Department of Defense. The solicitation was posted on July 29, 2026, with a firm deadline for responses set for August 3, 2026, leaving a narrow window for qualified suppliers to submit bids. The place of performance and specific delivery locations are not detailed, but compliance with federal defense logistics requirements is mandatory. All parties must be prepared to meet defense-grade quality controls, documentation, and supply chain security protocols appropriate for safety-critical components. The contract is accessible via the DIBBS platform, and potential bidders are expected to review all technical and regulatory requirements thoroughly before submission.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

RF Cable Assembly ManufacturingThe contract mandates the manufacture of twelve RF cable assemblies identified by NSN 5995-01-198-1884, strictly adhering to military-grade performance, quality, packaging, and cybersecurity requirements. These assemblies must meet stringent defense standards to ensure operational reliability and secure integration into classified or sensitive systems. The work is to be performed under a subcontract arrangement with a deadline for response set for August 6, 2026, and was posted on July 29, 2026. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the location where deliverables must be sourced or assembled. The North American Industry Classification System code 334310 categorizes this as electronic component manufacturing, underscoring the technical precision and specialized expertise required. The contracting entity is the ASC Commodities Division under the Department of Defense, signaling direct alignment with defense logistics and procurement priorities.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hybrid Relay Component SupplyThe contract encompasses the procurement and delivery of 12 hybrid relays designed to meet stringent military standards for packaging, labeling, and handling of hazardous materials. These components are critical to defense systems and must comply with all applicable military specifications to ensure operational reliability and safety in field environments. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002, indicating a specific logistical and regulatory framework governing the delivery and acceptance of the relays. This subcontract is issued under the NAICS code 334310, which classifies it within the electronic component manufacturing sector, and is managed by the Active Devices Division of the Department of Defense. The solicitation was posted on July 29, 2026, with responses required by August 10, 2026, leaving a limited window for qualified vendors to submit proposals. The contract requires full adherence to military logistics protocols and hazardous material regulations, emphasizing compliance as a non-negotiable condition for award. All parties must ensure that every relay is traceable, properly documented, and packaged to withstand transport and storage under military conditions without compromising performance or safety.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

MICROPHONE,DYNAMIC

Solicitation # SPE7MX26RX073

The U.S. Department of Defense, through DLA Land and Maritime, is seeking to procure the MICROPHONE, DYNAMIC under NSN 5965-01-233-0771 via a Firm-Fixed Price Indefinite Delivery Contract with a five-year ordering period, including a three-year base and two one-year option periods. This acquisition is entirely reserved for small businesses, with a size standard of 750 employees as defined by NAICS code 334310, and is subject to the Buy American Act. The item must comply with military specifications MIL-PRF-26542F(2) and MIL-PRF-26542/12C(1), with the part number M169A/AIC, and technical documentation is accessible through the TDMT portal. The estimated annual demand is 6,619 units, and deliveries must occur within 311 days after the issuance of individual delivery orders, with no shipments permitted prior to a DD Form 1155. The solicitation, numbered SPE7MX26RX073, will be issued around July 20, 2026, with responses due by August 20, 2026. Offers must be submitted via the DIBBS system using a scanned SF-1449 form or emailed directly to the contracting officer, and all submissions must be in English and in U.S. dollars. Evaluation will consider price, delivery, and performance, with FOB origin and delivery to destination as specified.

DLA Land And Maritime

POSTED

DEADLINE

Spangdahlem Building 19 Audio Visual Upgrade - Site Visit

Solicitation # FA5606QA060

On 12 August 2026 at 1300, a site visit is scheduled at Spangdahlem Air Base in Germany to gather feedback and address questions regarding the modernization of outdated Audio Visual and Video Teleconferencing equipment within the Primary Wing Operations Center, Crisis Action Team, and Emergency Operations Center facilities in Building 19. This visit is part of a sources sought solicitation under FA5606QA060, issued on 29 July 2026, with responses due by 1400 on the same day as the visit. The contracting office is the Department of Defense, specifically FA5606 52 Cons Da Lgc, with the point of contact being Danita Urioste and Rhandal Rodriquez, who can be reached via email and phone. All proposed solutions must align with the operational needs of the designated facilities and support the goal of upgrading mission-critical communication infrastructure. The place of performance is specified as Spangdahlem Air Base, while the agency administrative address is listed as APO, AE.

FA5606 52 Cons Da Lgc

POSTED

DEADLINE

Solar-Powered Self-Service Kiosk Design and SupplyThe contract seeks the design, manufacture, and supply of solar-powered, weatherproof self-service kiosks specifically engineered for kayak rental operations. These kiosks must support secure payment processing and include real-time inventory tracking to ensure seamless customer transactions and efficient fleet management. The systems are required to operate reliably in outdoor environments without reliance on external power sources, making solar energy a core design requirement. All units must be durable enough to withstand varied weather conditions and continuous public use without compromising functionality or security. The solicitation is classified as a subcontract under NAICS code 334310, indicating a focus on communications equipment manufacturing. The proposal deadline is set for August 5, 2026, and the work will be performed at an unspecified location designated as "Other," with the overseeing agency listed as Finance Facilities under the Kentucky state organization. While no set-aside provisions or point of contact details are provided, the contract emphasizes technological integration and environmental resilience, positioning the delivered kiosks as essential infrastructure for modern, contactless outdoor recreation services.

Finance Facilities

POSTED

DEADLINE

Quantum and Photonics Research Equipment SupplyThe contract seeks the supply of specialized equipment including quantum computing testbeds, ultrafast lasers, photonic sensors, and cryogenic systems to support naval-relevant research in quantum information and photonic technologies. These components are essential for advancing experimental capabilities in secure communications, sensing, and computing applications critical to naval operations. The work is intended for research and development purposes under the Office of Naval Research, part of the Department of Defense, with a focus on enhancing technological superiority through cutting-edge photonics and quantum systems. Subcontractors are invited to respond to the solicitation with proposals detailing their capability to deliver high-performance, reliable equipment suitable for demanding military research environments. The opportunity is open for submission until November 6, 2026, with a NAICS code of 334310 indicating classification under semiconductor and other electronic component manufacturing. The place of performance and specific delivery locations are not specified, implying potential flexibility for the contractor to determine optimal logistics based on project requirements. All submissions must demonstrate technical proficiency, quality assurance, and alignment with the strategic objectives of the Naval Research enterprise.

Office Of Naval Research

POSTED

DEADLINE

Emergency Vehicle Siren and Audio Alert Systems SupplyThe contract seeks the supply of electronic sirens, public address systems, and interior alert systems designed for emergency vehicles, with mandatory dual-tone functionality and voice evacuation capabilities to ensure clear and effective communication during critical incidents. All equipment must meet stringent performance standards to operate reliably under high-stress conditions, and the systems are intended to integrate seamlessly into existing emergency vehicle fleets. The procurement is structured as a subcontract under NAICS code 334310, which classifies it within the Communication Equipment Manufacturing sector, and is managed by the Office of Contract Administration under the California agency structure, with performance requirements centered in San Francisco. Responses are due by August 31, 2026, at 7:00 PM, and the solicitation was posted on July 29, 2026, providing potential suppliers with approximately six weeks to prepare and submit proposals. Although no set-aside designation is specified, the contract is open to qualified subcontractors capable of delivering compliant, high-performance audio alert systems. The place of performance is fixed in San Francisco, and the sourcing process is managed through the City of San Francisco’s official procurement portal, with all relevant documentation and submission instructions accessible via the provided link. Bidders must ensure full compliance with technical specifications and delivery timelines to be considered for award.

Office of Contract Administration

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Domestic Logistics & Delivery CoordinationThe contract requires coordinated execution of final delivery for cable assemblies to multiple domestic military stock locations, with strict adherence to packaging verification standards and shipping instruction compliance. All activities must ensure that cable assemblies are handled, packaged, and transported according to military requirements to guarantee readiness and operational suitability upon arrival at designated depots across CONUS. The solicitation is a small business set-aside under the SBA program, exclusively open to total small businesses as defined by FAR 19.5, with the NAICS code 484220 classifying it under truck transportation of specialized freight. The contract is managed by the ASC Commodities Division under the Department of Defense and is issued as a subcontract. Proposals must be submitted by the deadline of August 11, 2026, with no specified point of contact or place of performance details provided beyond the domestic scope. All work must align with DLA’s logistical and compliance frameworks to support military supply chain integrity.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.

Engineering Services

POSTED

DEADLINE

Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

MIL-STD-129 Marking and Bar-CodingThe contract requires the application of permanent, compliant markings and barcodes in strict adherence to MIL-STD-129 specifications for military tracking and logistics. This includes using approved symbology, correct label placement, and precise data formatting to ensure seamless integration with Department of Defense inventory and supply systems. All work must meet rigorous military standards for durability, readability, and accuracy under operational conditions. The contract is classified as a subcontract under NAICS code 561910, issued by the ASC Commodities Division of the Department of Defense, with performance required at Hill AFB, Utah, 84056-5734. The solicitation was posted on July 29, 2026, and responses are due by August 6, 2026. Interested parties must submit their proposals through the DIBBS platform using the provided link to be considered for award.

Packaging and Labeling Services

POSTED

DEADLINE

Defense-Compliant Packaging and PalletizationThe contract requires precise packaging and palletization of retaining plates in full compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all components are securely cushioned, wrapped, and palletized to meet military logistics specifications. This subcontract emphasizes rigorous adherence to defense-grade procedures for protection, handling, and transportation, with all materials and methods validated to prevent damage during transit and storage in operational environments. The work must be executed to guarantee readiness for immediate deployment and integration into the DoD supply chain. Performance is mandated at Hill Air Force Base, Utah, with a response deadline of August 6, 2026, and the solicitation falls under NAICS code 561910 for other support activities for warehousing and storage. The contracting entity is the ASC Commodities Division under the Department of Defense, and while no set-aside type is specified, participation is open to qualified subcontractors capable of delivering military-compliant packaging solutions. All work must be completed within the specified timeline to support ongoing defense logistics requirements, and full compliance with the referenced standards is non-negotiable.

Packaging and Labeling Services

POSTED

DEADLINE

Military-Grade Preservation and Protective Coating ApplicationThis contract requires the application of protective lubricants and preservatives to retaining plates in strict accordance with MIL-DTL-197M specifications, ensuring military-grade corrosion resistance and long-term preservation. The work encompasses the careful selection of approved compounds, adherence to standardized application processes, and thorough documentation of all procedures and material usage to maintain compliance and traceability. All activities must be performed to meet the stringent quality and operational requirements established by the Department of Defense for defense-related components. Performance of this subcontract is designated for Hill Air Force Base, Utah, with a firm response deadline of August 6, 2026. The contract falls under NAICS code 339999 for other miscellaneous manufacturing and is issued by the ASC Commodities Division under the Department of Defense. While no specific set-aside provisions are outlined, bidders must be prepared to demonstrate capability in military preservation standards, proper handling of classified or controlled materials if applicable, and the ability to provide complete process documentation as required by the specification. Participation is limited to qualified subcontractors capable of meeting the technical and administrative demands of defense-grade component preservation.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Precision Machining of Retaining Plate (Bearing Component)The contract calls for the manufacture of 11 retaining plates with part number 951B155-1 and NSN 3110-01-004-2387, to be produced in accordance with military specifications for integration into bearing assemblies. Although classified as a commercial item, the product must fully comply with defense standards to ensure operational reliability and compatibility within military systems. The work is being procured as a subcontract under the NAICS code 332991, indicating specialized machinery manufacturing, and is intended for performance at Hill Air Force Base with ZIP code 84056-5734. The solicitation was posted on July 29, 2026, with a response deadline set for August 6, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The procurement is conducted via the DIBBS platform, and while no specific set-aside program is designated, the requirement reflects a strategic need for precision-engineered components supporting critical defense equipment.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance Support (NIST SP 800-171)The contract seeks cybersecurity compliance support to achieve NIST SP 800-171 adherence for the protection of Controlled Unclassified Information under DFARS 252.204-7012 requirements. The scope includes developing a System Security Plan, creating and maintaining a Plan of Actions and Milestones, and ensuring full audit readiness through implementation of technical and administrative controls aligned with the NIST framework. This support is critical for safeguarding CUI handled by the contractor and must be delivered to meet Defense Federal Acquisition Regulation Supplement mandates. The work is classified as a subcontract under NAICS code 541512 and is being managed by the ASC Commodities Division within the Department of Defense. Performance is required to occur at Portsmouth, New Hampshire, with a response deadline of August 6, 2026, and the solicitation was posted on July 29, 2026. The contractor must possess demonstrated expertise in federal cybersecurity compliance, specifically in NIST 800-171 implementation, and be prepared to deliver documentation and operational controls that withstand rigorous defense audits. There is no specified set-aside classification for this opportunity.

Computer Systems Design Services

POSTED

DEADLINE

Logistics and Transportation Provider (Sea Shipment)The contract awards a subcontract for the sea transportation of packaged bearings under strict Defense Federal Acquisition Regulation Supplement (DFARS) 252.247-7023 requirements, ensuring full compliance with U.S. Department of Defense standards for international shipping. All shipments must adhere to MIL-STD-129 marking protocols for uniform identification and packaging, and the contractor is required to fully integrate with the Wide Area WorkFlow (WAWF) system to facilitate accurate and timely documentation, invoicing, and supply chain tracking. Transportation must be coordinated from the designated port of origin to Portsmouth, New Hampshire with precise adherence to delivery timelines and regulatory compliance throughout the logistics chain. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026, targeting experienced logistics providers capable of handling defense-related maritime shipments. The North American Industry Classification System code 488310 identifies the scope as support activities for water transportation, emphasizing specialized freight handling capabilities. This subcontract falls under the ASC Commodities Division of the Department of Defense, and all performance obligations are tied to the Portsmouth delivery location, requiring the contractor to maintain end-to-end visibility, documentation integrity, and regulatory compliance for defense-critical components.

Port and Harbor Operations

POSTED

DEADLINE

Packaging and Preservation Services ProviderThis contract seeks a subcontractor to provide military-compliant packaging and preservation services for bearings in accordance with MIL-STD-2073-1E and MIL-DTL-197M standards, ensuring the components maintain integrity during extended storage and transportation. The work requires strict adherence to Department of Defense packaging protocols to protect against corrosion, physical damage, and environmental degradation, with all processes validated to meet exacting military specifications. The opportunity is issued by the ASC COMMODITIES DIVISION under the Department of Defense and is designated as a subcontract with a response deadline of August 6, 2026. The place of performance is listed as Portsmouth, 03801-5000, and the North American Industry Classification System code is 332999, indicating the nature of the work falls under other fabricated metal product manufacturing. All submissions must be delivered by the specified deadline to ensure consideration for award.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

COTS Bearing Supplier / ManufacturerThe contract solicits the supply of six units of Ball, Annular Bearings identified by NSN 3110013332884, requiring strict compliance with MIL-DTL-197M and MIL-STD-2073-1E specifications to ensure military-grade performance and compatibility. Full traceability and certification are mandatory, confirming sourcing, manufacturing, and quality control meet defense logistics standards for use in critical defense applications. The offering is intended for the ASC COMMODITIES DIVISION of the Department of Defense, with performance located in Portsmouth, NH, and delivery must align with the defense supply chain’s rigorous documentation and accountability protocols. This subcontract opportunity was posted on July 29, 2026, with a response deadline of August 6, 2026, and is categorized under NAICS code 332993 for other miscellaneous fabricated metal product manufacturing. Suppliers must be prepared to provide full technical and certification documentation upon request, with no set-aside provisions indicated, meaning all qualified vendors are eligible to respond. All submissions must adhere to the requirements outlined in the DIBBS system and align with the specific technical, logistical, and compliance benchmarks set by the Department of Defense for defense-critical components.

Ammunition (except Small Arms) Manufacturing

POSTED

DEADLINE

Liquid Level Switch Supply and DeliveryThe contract calls for the supply and delivery of one military-spec liquid level switch designated by NSN 6680016940655, manufactured and packaged to meet all applicable defense quality, packaging, and marking requirements. The item must be delivered FOB destination to Norfolk, VA, with a strict delivery deadline of 20 days from award, ensuring timely compliance with operational readiness needs. The solicitation is issued under the NAICS code 334511, which corresponds to the manufacturing of navigational, measuring, electromedical, and control instruments, indicating a specialized technical requirement. Delivery is to be managed through the ASC Commodities Division of the Department of Defense, and the place of performance is clearly designated as Norfolk, VA with a zip code of 23511. The response deadline for submissions is August 6, 2026, and the contract type is classified as a subcontract, implying it may be awarded to a supplier under a prime contract or broader procurement framework administered by the DoD. All parties must ensure adherence to military specifications and delivery timelines to fulfill contractual obligations.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE