Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

CABLE ASSEMBLY, SPEC

Awarded
SPE4A6-26-T-080NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded contract SPE4A626P8159 to ASRC Federal Facilities Logistics, LLC, with a total value of $48,199.62, for the procurement of one cable assembly identified by NSN 6150016781651. The award was issued on July 17, 2026, under solicitation SPE4A6-26-T-080N, with performance to occur at the contractor’s facility in Fairfield, New Jersey. The contract is governed by FAR 52.222-90, addressing DEI discrimination by federal contractors, implemented under DoD Class Deviation 2026-00040, Revision 1, which mandates flow-down to all subcontractors and requires reporting of violations, legal challenges, or noncompliance related to Executive Orders 14275, 14265, 14398, and OMB Memorandum M-25-26. The contractor’s CAGE code is 79343, and the contract is classified under NAICS 335931 for cable and other communication equipment manufacturing. No specific delivery schedule, FOB terms, or quantities were provided, and the place of performance is limited to the contractor’s location. The contracting officer is Dean Allen, reachable at CARL.ALLEN@DLA.MIL, with no designated COR or COTR identified. The contract does not include specified packaging, preservation, or marking requirements, nor does it reference any MIL-STDs or detailed inspection criteria. Payment office and accounting data such as AAC, TAS, or ACRN lines are absent, and no invoicing system like WAWF or IPP is specified. The award basis, evaluation factors, and source selection methodology were not disclosed. The contract contains no enumerated attachments or option periods, and socioeconomic status, UEI, or size certification details were not provided. All compliance obligations derive from the incorporated FAR clause and DoD deviation, with no additional special requirements such as security clearances or OCI provisions cited.

General Info

ASRC FEDERAL FACILITIES LOGISTICS awarded $48,199.62 for cable assembly NSN 6150016781651 under DLA contract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$48,199.62

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

ASRC Federal Facilities Logistics, LLCView Profile

Award Issued Date

Documents

(1)

SPE4A626P8159_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts

Full Description

Show more
DLA award SPE4A626P8159 posted on DIBBS. Awardee: ASRC FEDERAL FACILITIES LOGISTICS, (CAGE 79343) Total Contract Price: $48,199.62 Award Date: 07-17-2026 Solicitation: SPE4A6-26-T-080N Line items: - CABLE ASSEMBLY, SPEC (NSN/Part 6150016781651, PR 7014545690)

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-11LJ
This contract specifies the procurement of a branched electrical cable assembly for special purposes, with the NSN 5995-01-670-8770 and part number 0024-0K-0852, under solicitation SPE4A6-26-T-11LJ. Seven units are required to be delivered FOB origin with zero variance in quantity, due within 229 days of contract award, by March 29, 2027. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and must be packaged and marked per MIL-STD-129 and RP001 packaging guidelines. The assembly must not contain intentionally added mercury or mercury-containing compounds unless exempted for functional uses in specified devices like batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Identification markings must conform to RQ017 requirements, and all packaging must be labeled with the correct Unit of Issue and Quantity per Unit Pack as specified. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Notes C19 and C20. The contract is managed by the ASC Commodities Division under the Department of Defense, with point of contact Angela Boyce.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-11LM
This contract specifies the procurement of a special-purpose electrical cable assembly with unique technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size. The item is subject to tailored higher-level quality requirements including inspection and acceptance at origin, mandatory first article testing on two units manufactured at the production facility, and a 100% dimensional characteristics check with objective evidence provided to confirm compliance with material and process standards. The approved first article sample must be preserved and delivered with the final production run unless degraded during testing or used for government verification. Sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan with designated verification levels for critical, major, and minor attributes and zero non-conformances required unless otherwise stated. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, restricted to contractors with approved JCP certification, completed DOD export training, and DLA authorization, with DFARS 252.225-7048 governing compliance. The contract references NSN 0001S00000053 for five units, with a 543-day delivery timeline, solicitation SPE4A6-26-T-11LM, and performance directed to New Cumberland, PA, under the Department of Defense’s ASC Commodities Division, with Berkeley Vaughan as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
Federal
CONNECTOR,RECEPTACL
Solicitation # N0010426QFE91
This contract pertains to the procurement of a specialized pressure-proof receptacle connector, designated as M24231/13-001, intended for critical shipboard systems where failure could lead to catastrophic consequences including loss of life or vessel. The item must comply strictly with MIL-DTL-24231 and associated specifications, with additional requirements emphasizing quality assurance, traceability, and safety. All materials, particularly the receptacle body, must meet QQ-N-281 Class A standards, and specific processes such as welding and brazing must adhere to approved procedures outlined in S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278. The contract mandates first article testing of one unit at Portsmouth Naval Shipyard with destructive evaluation to validate compliance, and all production must be supported by comprehensive objective quality evidence including chemical, mechanical, and non-destructive test certifications. Traceability is required from raw material through final assembly, with unique heat-lot markings permanently affixed, and certifications must be electronically signed and verifiable with no disclaimers permitted. The contractor is required to maintain an ISO-9001 quality system or an approved alternative, subject to government oversight at source, with no changes permissible without prior approval. All weld procedures, qualification data, and filler metal certifications must be submitted for review and approved before any production welding occurs, including mandatory 72-hour notification to DCMA for new qualifications. Certified documentation must be transmitted via Wide Area Work Flow to the Portsmouth Naval Shipyard with specific routing and electronic notification, and no material may be shipped without formal acceptance. The contract includes strict requirements for material handling, subcontractor control, inspection protocols, and zero-defect acceptance criteria for lot sampling. Mercury is prohibited, and adherence to Buy American Act provisions, small business set-aside status, and national defense priority ratings are enforced. All documentation, including engineering change proposals, waivers, and deviations, must be submitted electronically through the ECDS system, and the successful bidder must ensure full compliance with government inspection protocols and delivery schedules, culminating in a final delivery window of 365 days from contract award.
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
Federal
59--ADAPTER,CONNECTOR
Solicitation # N0010426RFC78
This contract pertains to the procurement of a specialized connector adapter, designated as a Critical Safety Item, for use in essential shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must conform to strict military specifications, primarily MIL-C-82620 and Naval Ordnance Systems Command Drawing LD162875, with specific engineering change proposals incorporated and certain clauses modified or exempted. All components, particularly those made of QQ-N-286 material, require rigorous certification, traceability, and inspection protocols. Each part must be traceable from raw material through fabrication to final assembly via unique heat-lot or traceability markings, with documentation verified at every stage. Non-destructive and destructive testing, including ultrasonic inspection, dye penetrant testing, and first article testing of four units, are mandatory, and results must be formally certified with electronic signatures accepted as legally binding. Quality assurance requirements enforce compliance with ISO-9001 or MIL-I-45208, with government inspection at source and mandatory submission of Objective Quality Evidence including chemical, mechanical, and weld certifications. Material handling, subcontractor oversight, and configuration control are tightly regulated, including prohibitions on mercury use and restrictions on repairs. The delivered product must meet a zero-defect standard for lot acceptance, and all certifications must be complete, legible, and unqualified, with no disclaimers permitted. The deadline for proposal submission is July 17, 2026, with delivery required within 365 days of contract award under a DO-priority rating for national defense use.
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 336413
New
DIBBS
CARTRIDGE, RESPIRATO
Solicitation # SPE8E6-26-T-3961
This contract specifies the procurement of respiratory cartridges, part number 7000051851 manufactured by 3M Company, with the NSN 4240-01-342-2857, under solicitation SPE8E6-26-T-3961. Each package contains 60 cartridges, and the item is classified as a Type I respirator cartridge with a non-extendable shelf life of 60 months, requiring compliance with NIOSH approval TC-23C-1062. The product must be free of intentionally added mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lamps, and controlled instruments, with additional containment requirements for portable mercury-containing devices per NAVSEA 5100-003D. The contract enforces strict packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129P, with special labeling for shelf life and the prohibition of plastic wrap, cushioning, or dunnage materials whenever possible. Palletization must adhere to DLA Packaging Requirements, and hazardous material shipping protocols are applicable. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. Delivery is FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Five separate delivery lines specify quantities ranging from one to ten packages, with required delivery dates between March and August 2026, and destinations spanning multiple U.S. military installations including Oahu, Offutt AFB, Yokota AB, and Tampa, with explicit instructions against using parcel post in favor of traceable transportation methods. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 423510
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0342
The contract specifies the procurement of aluminum alloy 6061 bar stock with a flat cross section, 0.500 inches thick and 1.250 inches wide, available in whole-foot lengths of 10, 11, or 12 feet, with an approximate weight of 0.735 pounds per foot. The material must conform to SAE AMS4117M Revision M, ASTM B666/B666M-20, and ASTM B660-23 standards, with a temper designation of T6, and requires a Certificate of Quality Compliance (mill material certification) to be included with each shipment. All units must be permanently marked with minimum required data including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stamping or stenciling; adhesive labels are required for bars under 0.250 inches nominal diameter. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation per ASTM B660 and marking as per MIL-STD-129R, including special code ZZ for preservation and packing. The item is subject to strict compliance with the Qualified Suppliers List for Distributors (QSLD) program; only distributors listed on the QSLD are eligible to supply this product, and any deviation or use of non-approved suppliers constitutes an unauthorized substitution that may result in criminal penalties. Government inspection and quality conformance requirements are waived for QSLD-compliant suppliers. The contract is firm fixed price with zero variance allowed in quantity, and delivery is required within 30 days after award. All shipments must be sent via traceable freight, not parcel post, to the designated DLA depot in Tobyhanna, Pennsylvania, with full compliance to all marking and documentation requirements.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details