Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CABLE ASSEMBLY, SPEC

Active
SPE4A6-26-T-11CVFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a single cable assembly with NSN 6150-01-666-6420 under solicitation SPE4A6-26-T-11CV, requiring delivery within 20 days to Camp Pendleton, California, with FOB origin terms and zero variance in quantity. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including packaging per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking codes applied. Physical identification of the item must adhere to RQ017, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Sampling and inspection follow MIL-STD-1916 or equivalent zero-defect criteria, with acceptance occurring at the destination point after delivery. The cable assembly must be shipped via traceable means, explicitly prohibiting parcel post, and freight must be directed to the designated Distribution Management Office at Camp Pendleton. Packaging follows DLA-specific requirements for palletization and containerization using E5 units with no cushioning material. The contract mandates compliance with all applicable DLA packaging directives, material handling, and government identification protocols, including removal of government markings from non-accepted items. The procurement is managed by the Department of Defense’s ASC Commodities Division with Gloria Frimpong as the primary point of contact and an established required delivery date of July 10, 2026.

General Info

Procure one cable assembly NSN 6150-01-666-6420, deliver by July 10, 2026, to Camp Pendleton, FOB origin, CMMC Level 2, MIL-STD compliant.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

BOX 555524, CAMP PENDLETON, CA, 92055-5524, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-11CV for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
GLORIA FRIMPONG
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CABLE ASSEMBLY,SPEC
CABLE ASSEMBLY,SPEC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
TDP Rev A Gen 1 IAW BASIC DRAWING NR 01365 08020D0226 REVISION NR DTD 09/27/2010 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-11CV
SECTION B
PR: 7017492986 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017492986 0001 EA 1.000
NSN/MATERIAL:6150016666420
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
M11320
COMMANDING OFFICER
2ND BN 11TH MAR
BOX 555524
CAMP PENDLETON CA 92055-5524
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
M11320
DISTRIBUTION MANAGEMENT OFFICE
7TH ST AND A AVE BLDG 2262
M/F:M11320 2ND BN 11TH MAR
CAMP PENDLETON CA 92055-5004
US
M/F: (TCN) M1132061880030
RDD: 281
PROJ: TP 3
SUPP ADD: YCOMM SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:07/10/2026
SPE4A6-26-T-11CV
SECTION B
PR: 7017492986 PRLI: 0001 CONT’D
SPE4A6-26-T-11CV NSN/Part Number: 6150-01-666-6420 Quantity: 1 EA Purchase Request: 7017492986QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11GX
This contract specifies the procurement of a cable assembly with part number 941292 and NSN 6150-01-678-1631, requiring two units to be delivered within five days of contract award. The items must meet all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and minor at Level II with an AQL of 4.0; unspecified attributes default to major. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adhering to DLA packaging standards. The items are designated as critical application items and must be physically identified per RQ017. Delivery is FOB origin with a zero variance tolerance, and inspection and acceptance occur at the origin. Documentation for source approval and removal of government identification from non-accepted items must follow specified procedures. The shipment is destined for the Joint Logistics Unit Vic in Bandiana, Australia, with freight handled by the Australian Government Cargo Office via DHL. The contract was issued under solicitation SPE4A6-26-T-11GX with a required delivery date of October 22, 2024, and is classified under NAICS code 335311, managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-11JC
This contract specifies the procurement of a commercial off-the-shelf wiring harness identified by part number ED0021863230-S and NSN 6150016778881, supplied by LOMBARDINI U.S.A. INC. The item is classified as a critical application component and must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date. A single unit is required for delivery within ten days of contract award, shipped FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and unit containment, and marking must conform to MIL-STD-129 with no special markings required. Palletization follows DLA packaging standards, and the shipment is designated as a RDD/_NMCS type with transportation governed by DLAD procedures. The delivery address is the Distribution Management Office at Camp Kinser, Japan, and the contract is linked to project TP 2 with government-specific identifiers for tracking and distribution. The solicitation number is SPE4A6-26-T-11JC, issued by the ASC Commodities Division of the Department of Defense under NAICS code 335311, with a response deadline of August 10, 2026, and an initial required delivery date of July 1, 2026. The unit of issue is each (EA), with a total price of $1.00. The contract includes detailed logistical instructions including interim container specifications, packing level, and distribution management designations. All documentation and compliance are subject to DLA standards, and point of contact for inquiries is Chinh Le with the provided phone and email. The item is subject to government-only usage tracking codes, and the supply chain process is governed by strict military logistics protocols as outlined in referenced DLA procedures and standards.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
DETECTOR, HEAT
Solicitation # SPE4A6-26-T-11GY
The contract is for the procurement of two heat detectors, identified by NSN 6350-01-724-6797 and part number 3001-311-850/265-26 from Meggitt Safety Systems Inc, to be delivered within five days of contract award. Strict prohibitions apply to the intentional use or direct contact of mercury or mercury-containing compounds in any hardware or supplies, with exceptions limited to functional uses in batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, and chemical analysis reagents specifically approved by NAVSEA. Portable devices containing mercury must be shock-proof and include a secondary containment barrier compliant with NAVSEA 5100-003D. Mercury is also explicitly banned in preservation, packaging, packing, and marking processes. The items must be packaged per MIL-STD-2073-1E, marked per MIL-STD-129 with no special marking codes, and palletized according to DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are assigned verification levels or AQLs as defined. The delivery is FOB origin, with inspection and acceptance occurring at destination, and shipping must occur via the fastest traceable means—parcel post is prohibited. The destination is Assault Craft Unit 4 in Virginia Beach, VA, and the contract obligates compliance with DLA’s technical and quality requirements referenced from the DLA Master List. The required delivery date is July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11HQ
This contract specifies a single commercial off-the-shelf cable assembly with part number U038-006 manufactured by Tripplite Division of Trippe Mfg Co, identified by NSN 6150-01-737-8084. The item must be delivered within 20 days FOB destination to USS NEW YORK LPD 21 at FPO AA 34092, with strict adherence to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. No quantity variance is permitted, and inspection and acceptance occur at the delivery point. The contract prohibits the intentional use of mercury or mercury-containing compounds in the product or its packaging, with exceptions limited to functional components like batteries and fluorescent lamps that meet NAVSEA 5100-003D standards for shock resistance and dual containment. Packaging must comply with DLA’s procurement requirements and exclude mercury in preservation, packaging, and marking as mandated by IP056. Shipment must use traceable freight methods—parcel post is explicitly forbidden—and must be delivered by the original required date of June 18, 2026. Documentation and technical compliance are governed by the DLA Master List of Technical and Quality Requirements referenced in RA001 and RC001, particularly for source approval and critical application status. The contract is issued under a federal acquisition vehicle with a solicitation number SPE4A6-26-T-11HQ and a NAICS code of 335311 for electrical equipment manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
SOCKET BASE, FIRE DE
Solicitation # SPE8E8-26-T-4938
The contract specifies the procurement of socket bases for fire department use under solicitation SPE8E8-26-T-4938, with the NSN 6350332109888 and part number SPB-ADAPT-NA, supplied by CONSILIUM MARINE & SAFETY AB. Eighteen identical line items are listed, each for one unit at a unit price of $1.00, totaling $18.00, with all deliveries required within 20 days FOB destination and no variance permitted in quantity. Inspection and acceptance occur at the destination, and all packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951. Packaging must adhere to MIL-STD-129 labeling, and palletization must follow RP001 guidelines. If deemed hazardous per FED-STD-313, item must be packaged under TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item must be shipped via VSM using the fastest traceable means, with parcel post strictly prohibited. Delivery is destined for USS FT LAUDERDALE (LPD 28), FPO AE 09595, under RDD 777 and Project LK5 TP 2. All shipments must reference the provided TCN and government identifiers, with original delivery dates ranging from July 20 to July 22, 2026.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-11BZ
The contract specifies the procurement of three cable assemblies under the NSN 6150-01-657-0502 with a delivery requirement of 395 days after award, issued as a total small business set-aside under NAICS code 335311. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, with applicable revisions determined by the solicitation issue or award date depending on acquisition size. Packaging, item marking, and removal of government identification from non-accepted supplies must comply with DLA-specific directives. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. Inspection and acceptance occur at the manufacturer’s origin, and configuration changes require formal engineering change proposals or variance requests. Export control applies to technical data under ITAR or EAR, restricting disclosure to foreign persons and requiring prior authorization; access is limited to DLA contractors with approved JCP certification, completed training, and formal approval. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization. Documentation for source approval requests and covered defense information handling are required, though item unique identification is waived per customer request. All data and performance are subject to DFARS 252.225-7048 and other relevant provisions. The contract was solicited by the DLA Commodities Division, with performance assigned to New Cumberland, PA, and primary contact is Marcita Robinson.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CB
This contract specifies the procurement of a special-purpose cable assembly identified by NSN 6150999684675 and part number MRI MBM 1121/I from L3HARRIS RELEASE & INTEGRATED SOLUTIONS, with a quantity of eight units to be delivered FOB origin within 347 days of contract award. The item is classified as a critical application item, requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Compliance with DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking is mandatory, and palletization must conform to DLA packaging guidelines. The product must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The contract enforces zero-defect sampling standards under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. A Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment is required, and covered defense information protocols apply. Documentation for source approval requests must be submitted in accordance with RC001, and government identification must be removed from non-accepted supplies per RQ011. The unit of issue is each (EA), and the contract number is SPE4A6-26-T-11CB with a response deadline of August 10, 2026, issued by the Department of Defense’s ASC Commodities Division. The required delivery date is July 24, 2027, and transportation details follow DLA procedural notices C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE7L5-26-T-4731
The contract pertains to the procurement of a wiring harness with NSN 6150-01-514-1692 and part number 3462464, for a quantity of six units, under solicitation SPE7L5-26-T-4731. Delivery is required within 88 days of the contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must fully comply with MIL-STD-2073-1E, including specific preservation methods, container types, and marking requirements per MIL-STD-129. Special handling applies as the item is designated as protected cargo, requiring omission of all item nomenclature on shipping containers to ensure security and confidentiality. The packaging must also indicate reusable container status per MIL-STD-2073-1 Appendix C, with clear labeling for reuse. Cables must be coiled to minimize volume without compromising functionality or damaging connectors, and secured to prevent kinking. The delivery address is DLA Dist San Joaquin in Tracy, California, and transportation follows DLA procurement notes C19 and C20. This item is classified as a repairable component and must be packaged in containers that allow for return and reuse. The unit price is $6.00 per unit, with a total contract value of $36.00. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and the original required delivery date is January 25, 2027, though the need ship date is November 10, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the controlling revision determined by the solicitation or award date. The point of contact for this procurement is Bradley Evans of the Department of Defense, reachable via email and phone listed in the contract data.
LAND SUPPLIER OPNS ENGINES

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-11CF
This contract is for the procurement of three special-purpose electrical cable assemblies identified by part number C10908-513 and NSN 6150012902919, supplied by Glenair, Inc. and Lockheed Martin Corporation under solicitation SPE4A6-26-T-11CF. The items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with verification levels and sampling procedures mandated to MIL-STD-1916 or equivalent zero-based plans, requiring zero non-conformances unless otherwise specified. Configuration control is enforced through engineering change proposals and variance requests, and physical identification of bare items must follow RQ017 guidelines. The cable assemblies are designated as critical application items, subject to cybersecurity compliance under CMMC Level 2 Self-Assessment and covered defense information protocols. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required, and palletization adheres to DLA packaging standards. Delivery is FOB origin, with inspection and acceptance occurring at the destination warehouse in Tracy, California, and the required delivery date is April 22, 2027, with no variance permitted in quantity. The contract mandates full documentation for source approval and compliance with all DLA logistics and transportation directives, including the designated parcel post and shipping address.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11FP
This contract pertains to a single cable assembly identified by NSN 6150-01-716-9389 with a delivery deadline of 20 days ADO, issued under solicitation SPE4A6-26-T-11FP by the Defense Logistics Agency’s ASC Commodities Division. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, government identification must be removed from non-accepted items, and all bare components must be physically marked according to RQ017. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are classified with defined verification levels or AQLs; unspecified attributes default to major. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved JCP certification, completion of DLA-mandated training and questionnaires, and explicit authorization from DLA. The place of performance is Cherry Point, North Carolina, with Ashley Sheppard as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-11CJ
The contract is for the procurement of 12 electrical cable assemblies of special purpose with part number 197C8534 and NSN 6150013372496, issued under solicitation SPE4A6-26-T-11CJ by the Defense Logistics Agency. Delivery is required within 255 days after award, with FOB origin terms and no quantity variance permitted. Inspection and acceptance occur at the destination facility, specifically the DLA Distribution Center in New Cumberland, Pennsylvania. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 and no special marking codes. The assemblies must be palletized per DLA guidelines and shipped via approved transportation procedures outlined in DLAD Proc Notes C19 and C20. The contract enforces strict compliance with technical and quality standards referenced in the DLA Master List, including cybersecurity requirements under CMMC Level 2, configuration change management through Engineering Change Proposals, and removal of government identification from non-accepted items. Sampling for quality verification follows MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Covered defense information applies, and the supplier must adhere to all applicable requirements noted by R or I numbers. The contract specifies two approved suppliers—General Dynamics-OTS, Inc. and DCX-Chol Enterprises, Inc.—with the delivery deadline set for April 23, 2027, and the point of contact for inquiries is Larry Ferguson, DLA.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
POWER SUPPLY
Solicitation # SPE7M2-26-T-5941
This contract pertains to the procurement of two power supply units under solicitation SPE7M2-26-T-5941, with a delivery requirement of 161 days from award and an original required delivery date of January 22, 2027. The items are identified by NSN 6120-01-686-5782 and must be delivered FOB origin with zero variance in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using the packaging code U and specific preservation methods. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with identical shipping and parcel post addresses. The contract strictly prohibits the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional applications in batteries, lighting, instruments, weapons, and specified reagents; portable mercury-containing devices must include shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions. The unit of issue is each (EA) at a fixed unit price, totaling a contract value of two units. Critical application item NAG, LLC 1PL37 P/N 1011RS0072 is specified, and transportation logistics are governed by DLA procedural notes C19 and C20.
NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, HEXA
Solicitation # SPE4A6-26-T-11GS
A hexagonal plain slotted nut, identified by NSN 5310-00-849-6883, is being procured in a quantity of 14 units under a fully competitive solicitation governed by military and federal specifications. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance taking place at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation, numbered SPE4A6-26-T-11GS, was posted on August 2, 2026, with responses due by August 10, 2026, and falls under NAICS code 332722 for screw, nut, bolt, and fastener manufacturing. The delivery timeline is set at 89 days after award, and the primary point of contact for inquiries is Vincent Price, reachable via phone or email provided through the Defense Logistics Agency’s DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CM
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-424-8044, for a quantity of four units, under solicitation SPE4A6-26-T-11CM. The required delivery timeline is 316 days after order, and the solicitation closed on August 10, 2026, with a posted date of August 2, 2026. The item falls under NAICS code 334419 and is procured by the Defense Logistics Agency’s ASC Commodities Division. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Marcita Robinson. The cable assembly is subject to stringent technical and quality requirements referenced from the DLA Master List, and must comply with DLA packaging standards. Surplus supply is explicitly not acceptable, and government identification must be removed from any non-accepted items. The item is governed by cybersecurity and export control policies, including CMMC Level 2 certification requirements for the third-party assessment organization involved, and the application of Covered Defense Information. Technical data associated with the cable assembly is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have received explicit approval from DLA authorities. DFARS 252.225-7048 governs the handling of this sensitive technical data.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, NAVIGATIONAL,
Solicitation # SPE4A6-26-T-11FH
The contract pertains to the procurement of a commercial off-the-shelf navigational marine light identified by part number 3680283000 and NSN 6220-01-729-1879, with a requirement for four units to be delivered within twenty days from the order date. The item is classified as a critical application item and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and labeling in accordance with MIL-STD-129 with the special marking code “01 - Fragile.” Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the quantity variance is strictly zero percent. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and is addressed to the Naval Amphibious Base Coronado in San Diego, California, with the freight address and shipment details clearly defined. The contract is issued under solicitation SPE4A6-26-T-11FH with a required delivery date of July 23, 2026, and is governed by DoD authorized unit of issue and acquisition procedures. All supplies must be free of government identification if not accepted, and government use fields indicate specific logistics and distribution codes for internal tracking.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EB
The contract specifies the procurement of a radio frequency cable assembly under solicitation SPE4A6-26-T-11EB, with a quantity of five units to be delivered within 20 days to Naval Station Newport, Rhode Island, FOB origin. All items must comply with stringent technical, quality, and packaging standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must adhere to MIL-STD-2073-1E preservation, MIL-STD-129 marking, and DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated as a critical application with source approval requirements and must be traceable throughout delivery, prohibiting parcel post in favor of certified freight methods. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in the product, packaging, preservation, or marking, with limited exceptions for functional components such as batteries or instruments specified by NAVSEA, which must include secondary containment. Packaging must meet palletization guidelines and use only approved materials, with special attention to the prohibition of mercury in any preservation or packing materials. The NSN 5995017220586 is the sole identified material, with a fixed quantity and no variance allowed. Shipments must be directed to the designated military address, labeled appropriately, and delivered by the required delivery date of July 22, 2026. The contract is managed by the Department of Defense’s ASC Commodities Division, with point of contact Ernest Penrose, and the NAICS code 335931 applies to the nature of the product being procured.
Current-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-11CQ
The contract pertains to the procurement of one unit of a PIN, RETAINING with NSN 5315-58-002-1217 and part number MUHLD148-831 from HIAB USA INC, issued under solicitation SPE4A6-26-T-11CQ. Delivery is required within 10 days FOB origin to the US Army SSA SUSBDE APS 405TH AFSB at Leutsestraat 34, Zutendaal 3690, Belgium, with inspection and acceptance occurring at the destination. The item is to be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging and palletization must adhere to DLA’s standardized requirements, and the unit of issue is EA. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated in the sample unless otherwise specified, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List, and the revision in effect at the solicitation issue date governs. The required delivery date is June 25, 2026, with no variance allowed in quantity. Transportation and shipping details align with DLAD Proc Notes C19 and C20, and the contract designates W51109 as the RDD and freight address, with government use codes and project identifiers included for tracking.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-11FE
The contract pertains to the procurement of three sleeve bearings identified by NSN 3120-01-198-2352 and part number KDJ08C015-241, with delivery required within 169 days to Robins Air Force Base in Georgia. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and manufacturing may involve casting or forging processes, necessitating potential tooling that the government does not necessarily possess; suppliers must submit a Casting and Forging Assistance Request if needed. The bearings must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 with no special marking codes applied. Unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Although item unique identification is not required per the service customer’s request, physical identification and bare item marking are still mandatory. The contract is governed by DFARS clauses and DLA packaging directives, with delivery FOB origin and transportation logistics defined by DLA procedural notes. The sole approved source data includes multiple manufacturers with identical part numbers, and the contract originates from the Department of Defense’s ASC Commodities Division under solicitation SPE4A6-26-T-11FE, responding to purchase request 7012343205 with a need ship date of November 16, 2025, and an original required delivery date of March 25, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EA
This contract pertains to the procurement of a cable assembly identified as RADI with NSN 5995-01-722-6071 and part number MINIBEND LR-41.00 manufactured by HUBER+SUHNER ASTROLAB, INC. A total of five units are required with a unit price of $5.00, resulting in a total contract value of $25.00, to be delivered within 20 days to the Naval Undersea Warfare Center Division Newport in Rhode Island. Delivery is FOB origin and inspection and acceptance occur at the destination. The item is classified as a commercial off-the-shelf (COTS) product and a critical application item, subject to specific quality and technical requirements referenced from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Strict packaging regulations apply, requiring compliance with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes needed. Packaging must adhere to DLA requirements, prohibiting any mercury or mercury-containing compounds in preservation, packaging, or labeling, in alignment with NAVSEA 5100-003D, except for specific functional uses in batteries, sensors, or instrumentation. Parcel post is prohibited; shipping must occur via traceable means. The item is not subject to Item Unique Identification per customer request, and all documentation must follow source approval and removal of government identification protocols where applicable. The contract references precise unit of issue standards and requires delivery by July 23, 2026, with procurement governed under solicitation SPE4A6-26-T-11EA and governed by the Department of Defense through the ASC Commodities Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
KEY, WOODRUFF
Solicitation # SPE4A6-26-T-11HZ
The contract under reference KEY, WOODRUFF, solicitation number SPE4A6-26-T-11HZ, issued by the Department of Defense’s ASC Commodities Division, requires the delivery of 20 units of NSN 5315-01-173-9441 with a delivery deadline of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions, unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stipulated. Documentation for source approval requests must comply with RC001 standards. The supplier is strictly prohibited from intentionally adding mercury or mercury-containing compounds to any supplied hardware or materials, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. All supplies must be marked per physical identification requirements and government identification removed from non-accepted items. The point of contact is Samantha Hopkins, and performance is set in San Diego, CA, with responses due by August 10, 2026.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-11GF
The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-11GW
The contract specifies the procurement of one shoulder screw, part number SR-16 with NSN 5305-01-549-2013, under solicitation SPE4A6-26-T-11GW, with a required delivery within 20 days from the contract date. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130N for physical identification marking and MIL-STD-129 for labeling. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The screw must be free of intentional mercury or mercury compounds throughout its manufacturing, packaging, and preservation, except for narrowly defined functional exceptions such as batteries or sensors, and even then must meet NAVSEA containment standards. Packaging must conform to MIL-STD-2073-1E with preservation methods specified, palletization as per DLA requirements, and prohibition of mercury in any preservation or packing materials. Delivery is FOB origin to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, with shipper required to use the fastest traceable means, explicitly excluding parcel post. The contract requires CMMC Level 2 self-assessment compliance, and all markings, packaging, and documentation must precisely follow government-prescribed formats, with no variance allowed in quantity.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details