Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

CADEX 7400 Battery Analyzer Supplier

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement and delivery of one CADEX 7400 Battery Analyzer for prime contractors supporting Department of Defense supply contracts through the DDSP New Cumberland Facility. The supplier is responsible for ensuring the unit adheres to all DLA Master List technical and quality requirements, with performance taking place in New Cumberland, Pennsylvania. The contract mandates strict adherence to specific military standards, including sampling plans per MIL-STD-1916 or ASQ H1331 Table 1. Additionally, the supplier must comply with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging to ensure the analyzer is delivered fully completed and properly prepared.

General Info

Supplier delivers one CADEX 7400 Battery Analyzer to New Cumberland per military standards.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L7-27-T-0353.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BATTERY OPTIMIZER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies one CADEX 7400 Battery Analyzer for prime contractors delivering DLA supply contracts. Procures and delivers the unit ensuring it meets DLA Master List technical and quality requirements. Adheres to sampling plans per MIL-STD-1916 or ASQ H1331, Table 1. Complies with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Delivers the completed, packaged, and marked analyzer.

Similar Contracts

Same NAICS industry code

Voltmeter Equipment Supplier (NSN 6625-01-392-6261)This subcontract involves the manufacture or procurement of six specialized voltmeters meeting NSN 6625-01-392-6261 specifications for the DLA Weapons Support Maritime Supply Chain. The supplier is responsible for ensuring all units are marked and labeled according to MIL-STD-129 and packaged in compliance with RP001 and RA001 standards. Additionally, the contractor must adhere to the Buy American Act and the Berry Amendment. The completed equipment must be delivered FOB Origin to DLA Distribution in Warner Robins, Georgia. This opportunity falls under NAICS code 334510 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Medical-Grade Rehabilitation Treadmill System SupplierThis subcontract involves the supply and delivery of a commercial and medical-grade rehabilitation treadmill system for the Parkwood Institute, managed through Healthcare Materials Management Services. The selected supplier is responsible for providing a comprehensive hardware and software package designed for clinical gait training, mobility rehabilitation, and patient assessment. The scope of work requires the delivery of a fully functional and installed system. The contract mandates strict adherence to Canada’s Fighting Against Forced Labour and Child Labour in Supply Chains Act. Interested parties must submit their responses by November 13, 2026, for this project based in Canada under NAICS code 334510.

Healthcare Materials Management Services (HMMS)

POSTED

about 12 hours ago

DEADLINE

HMMS04746 - Advanced Contract Award Notice (ACAN) Rehabilitation Treadmill System

Solicitation # rfi_2037

Healthcare Materials Management Services (HMMS) has issued an Advanced Contract Award Notice (ACAN) under solicitation number rfi_2037 for a commercial medical-grade rehabilitation treadmill system. The equipment is intended for clinical gait training, mobility rehabilitation, assessment, and therapeutic applications at St. Joseph's Health Care London, Parkwood Institute in London, Ontario. The procurement specifically identifies the High-Performance Rehabilitation Treadmill (Mercury Med) from manufacturer Atlas Medic. The required deliverable is a complete, fully functional package encompassing all necessary hardware and software, as well as installation, configuration, integration, and initial user training. The purpose of this ACAN is to determine if other proponents can meet the requirements before a sole or single source award is made. Interested respondents must submit their online responses by November 13, 2026. Evaluation focuses on mandatory compliance with Canada's Fighting Against Forced Labour and Child Labour in Supply Chains Act, the provision of a Certificate of Insurance, and the submission of three client and two financial references. Eligibility is strictly defined, as HMMS reserves the right to disqualify U.S. businesses that employ fewer than 250 full-time employees in Canada, while favoring those that qualify as Canadian businesses. Additionally, proponents must disclose any potential conflicts of interest and any funding or in-kind programs provided to HMMS or the associated hospitals.

Healthcare Materials Management Services (HMMS)

POSTED

about 12 hours ago

DEADLINE

Automated Traffic Monitoring Equipment SupplierThis subcontract for an Automated Traffic Monitoring Equipment Supplier involves providing essential hardware and software for automated data collection on Regional Transportation District PnR projects. The scope of work includes the delivery of video-based collection systems, AI-driven image processing software for counting pedestrians and vehicles, and specialized monitoring equipment to track the accumulation of motor vehicles and bicycles. All provided equipment and software licenses must adhere to strict RTD data validation and quality standards. Managed under the Planning agency in Colorado, the opportunity is categorized under NAICS code 334510. Interested parties must submit their responses by the deadline of November 20, 2026. The contract focuses on supporting prime contractors through the deployment of advanced technological tools to ensure accurate traffic and transit data collection.

POSTED

DEADLINE

Submit one complete bid in a sealed, opaque envelope or package. The exterior must be clearly marked SEALED BID - KDMC TELEMETRY SYSTEM - DO NOT OPEN and must identify the bidder. A searchable PDF copy may be included on a USB drive inside the sealed

Solicitation # KDMC-RHTP-TELEMETRY

King's Daughters Medical Center (KDMC) is soliciting firm-fixed price bids under solicitation KDMC-RHTP-TELEMETRY for a turnkey, hospital-wide telemetry and patient monitoring system in Brookhaven, Mississippi. The project requires the contractor to furnish, install, configure, integrate, and support a complete system, including 28 wearable wireless transmitters, 34 bedside monitors, 36 transport-capable modules, and a redundant virtualized central monitoring architecture. A critical requirement is the seamless integration with the Meditech electronic medical record environment and adherence to strict cybersecurity standards, including the provision of a machine-readable Software Bill of Materials. The entire project, including final invoicing, must be completed and accepted by June 30, 2027. Bids must be submitted in a sealed, opaque envelope marked SEALED BID - KDMC TELEMETRY SYSTEM - DO NOT OPEN by the deadline of October 28, 2026. Award will be granted to the responsible bidder offering the lowest responsive bid, with mandatory technical, clinical, and cybersecurity requirements evaluated on a pass/fail basis. The contractor is responsible for all low-voltage cabling, labeling, and asset records, and must provide clinical super-user training. Final acceptance is contingent upon 30 consecutive days of stable production operation and the successful closure of all technical and clinical validation tests. Compliance with federal standards, including SAM.gov exclusion verification and specific environmental and labor acts for contracts exceeding certain thresholds, is mandatory.

POSTED

DEADLINE

PINPOINT SIGMA SYS Manufacturing/SupplyThis subcontract involves the manufacturing and supply of the complete PINPOINT SIGMA SYS for prime contractors supporting DLA Mechanicsburg. The selected provider is responsible for procuring or manufacturing integrated hardware, software, and firmware in strict accordance with technical requirements, while maintaining the total equipment baseline configuration and conducting plant quality assurance. The final deliverable consists of one fully inspected and packaged unit. Compliance is a critical component of this effort, requiring the contractor to hold CMMC Level 1 certification. Additionally, all work must adhere to specific military standards, including MIL-STD-973, MIL-STD-130, MIL-STD-129, and MIL-STD-2073-1. The opportunity falls under NAICS code 334510 and is managed by the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

FAULTFINDER ETS SYS Manufacturing/SupplyThis subcontract involves the manufacturing and supply of the complete FAULTFINDER ETS SYS for prime contractors supporting DLA Mechanicsburg. The scope of work includes the procurement or manufacture of integrated hardware, software, and firmware in strict accordance with technical requirements. The contractor is responsible for maintaining the total equipment baseline configuration and conducting comprehensive plant quality assurance to ensure the delivery of one fully inspected and packaged unit. Compliance is a critical component of this contract, requiring the provider to maintain CMMC Level 1 certification. Additionally, all deliverables must adhere to specific military standards, including MIL-STD-973, MIL-STD-130, MIL-STD-129, and MIL-STD-2073-1. The project falls under NAICS code 334510 and is managed through the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

6530--NX EQ Environmental Disinfection Systems Pulsed Xenon UV Light (VA-27-00012571)

Solicitation # 36C10X27Q0009

The Department of Veterans Affairs Enterprise Procurement Office is conducting market research through this Sources Sought Notice to identify qualified sources capable of providing Xenex LightStrike+ Environmental Disinfection Systems Pulsed Xenon UV Light or equivalent products. The government intends to establish a single Requirements Contract with Firm-Fixed Price orders under FAR 16.503 to supply these systems to medical centers and facilities nationwide. The procurement falls under NAICS code 334510 with a size standard of 1,250 employees. Interested respondents must maintain active registration in the System for Award Management and provide verification in the SBA database if claiming SDVOSB or VOSB status. The required systems must be FDA authorized whole room microbial reduction devices utilizing high intensity pulsed xenon emitters in the 240 to 315 nm range. Key technical requirements include a single mobile unit capable of 360-degree exposure, a unified operator interface with independent cloud-based reporting, and the provision of comprehensive operator training. The government is considering several specific Xenex part numbers and optional one-year warranty extensions. Responses are due by November 4, 2026, and must include the company's UEI, socioeconomic status, country of origin for products, technical literature meeting minimum requirements, and estimated pricing inclusive of flat rate shipping.

Sac Frederick (36C10X)

POSTED

DEADLINE

Sources Sought for Cefaly Devices at VA Puget Sound

Solicitation # 36C260-27-AP-0723

The Department of Veterans Affairs, specifically the VA Puget Sound Health Care System, is seeking sources for the procurement of an estimated 1,224 Cefaly Connected migraine treatment devices. This sources-sought notice, identified by solicitation number 36C260-27-AP-0723, falls under NAICS code 334510. The requirement is managed by the Network Contract Office 20 based in Vancouver, Washington, with the place of performance located in Seattle, Washington. The procurement specifies the need for FDA-cleared CEFALY Connected devices, which are portable, medication-free systems that utilize electric impulses to treat acute migraine attacks and prevent future episodes. Key technical requirements for the devices include Bluetooth-enabled synchronization with the CeCe Migraine Management app and an improved battery life of seven hours. Interested respondents were required to provide information by the deadline of November 4, 2026.

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

Ultrasound Diagnostic System, Hand Carried (USHC) - Prototype

Solicitation # W91CRB-RPP-USHC

The U.S. Army, through the Portfolio Acquisition Executive Maneuver Ground and Project Manager Maneuver Medical Devices, is soliciting prototype proposals for a hand-carried Ultrasound Diagnostic System (USHC). This effort is structured as a Direct Other Transaction Agreement under 10 U.S.C. 4022, meaning it is not a FAR-based contract. The government seeks a Commercial-Off-The-Shelf or Non-Developmental Item capable of supporting medical operations in austere Role of Care 3 environments, specifically for FAST exams, ultrasound-guided procedures, and ruling out deep vein thrombosis. Selected vendors must deliver two prototype units for operational and environmental testing in accordance with MIL-STD-810H. The system must be FDA cleared for human use, Trade Agreements Act compliant, and capable of operating on both CONUS and OCONUS power infrastructures. The estimated period of performance is twelve months, with prototype delivery expected 45 to 60 days after award. Evaluation is based on a comparative best-value methodology, prioritizing technical approach, performance compliance, reliability, schedule realism, and past performance over cost. Key requirements include MIL-STD-130N compliant IUID marking, NIST SP 800-171 cybersecurity compliance, and a minimum one-year warranty. Proposals must be submitted via DoD SAFE or secure email by November 6, 2026, and must adhere to strict page limits across four specific volumes. Notably, participants in this prototype agreement may be eligible for a noncompetitive follow-on production contract.

POSTED

DEADLINE

Mohawk Medbuy Corporation - Notice of Planned Procurement - CW17441 MILR THERMAL ABLATION PRODUCTS 2027 - RFP

Solicitation # AB-2026-07015

Mohawk Medbuy Corporation is seeking proposals for the provision of thermal ablation systems and related products and services, specifically covering Radiofrequency Ablation, Microwave Ablation, and Cryoablation modalities. The scope of the procurement includes equipment, consumables, accessories, and service for each of these three categories. The resulting contract will have an initial term of four years, with the possibility of two additional two-year extensions. Proponents must demonstrate a sufficient breadth of product to meet commitment levels for the awarded categories. All submissions, including technical responses and pricing, must be completed through the Euna Procurement portal by the deadline of November 13, 2026. Interested parties are encouraged to attend the scheduled Bidders Conference and monitor the Euna and Biddingo platforms for further updates and communication.

Mohawk Medbuy Corporation

POSTED

DEADLINE

Specialized Medical Component FabricationThis subcontract for Specialized Medical Component Fabrication involves the production of precision components for medical devices focused on trauma care and fracture stabilization. Working under prime contractors for BARDA projects within the Department of Health and Human Services, the selected provider will utilize precision CNC machining and molding to fabricate hardware from biocompatible polymers and medical-grade alloys. The contract requires strict adherence to FDA regulatory compliance and ISO 13485 certification to ensure the quality of the finished medical device components. Performance will take place in Washington, with a response deadline set for November 18, 2026.

Barda - Aspr / Daappo / Barda Dcma

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Thermal Cycling and Environmental Validation TestingThis subcontract for Thermal Cycling and Environmental Validation Testing involves performing environmental stress testing for prime contractors on DLA supply contracts. The scope of work requires validating the performance of observation windows across a temperature range of -55°C to 65°C, executing at least 100 cycles over a two-hour period using environmental test chambers. The testing must verify structural integrity and clarity in accordance with Navy drawing 1582AS124, culminating in the delivery of certified test reports for 18 units. The project is managed under the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Due to the nature of the technical data handling involved, the contractor must maintain CMMC Level 2 certification. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 2, 2026.

Testing Laboratories and Services

POSTED

about 9 hours ago

DEADLINE

Manufacture of Observation Windows (NSN 9340013261731)This subcontract involves the manufacture of 18 precision observation windows (NSN 9340013261731) for the Department of Defense DDSP New Cumberland Facility. The windows must be fabricated to specific dimensions of 6.125 inches in length, 5 inches in width, and 0.125 inches in thickness, strictly adhering to Navy drawing 1582AS124 and utilizing source-controlled processes. Materials must be rated for temperatures ranging from -55°C to 65°C, and the production process requires the use of precision polishing equipment. Compliance requirements include CMMC Level 2 certification and adherence to the Buy American Act. Finished products must be packaged according to ASTM D3951 and MIL-STD-129 standards. The performance of this contract will take place in New Cumberland, Pennsylvania, with a response deadline set for November 2, 2026.

Optical Instrument and Lens Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Check Valve Cartridges (NSN 4820-01-619-4499)This subcontract involves the procurement or manufacture of four check valve cartridges identified by NSN 4820-01-619-4499 for prime contractors supporting the Defense Logistics Agency. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. All delivered units must strictly adhere to the established technical specifications and be packaged according to RP001 DLA Packaging Requirements for Procurement. A critical restriction of this contract is the absolute prohibition of additive manufacturing in the production of the cartridges. Interested parties must submit their responses by the deadline of November 2, 2026. The contract falls under NAICS code 332919, focusing on the supply of specialized valve components to meet military logistics needs.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized packaging and marking for prime contractors fulfilling DLA supply contracts. The scope of work requires packaging components in accordance with RP001 and MIL-STD-2073-1E, with markings applied per MIL-STD-129. The contractor must utilize industrial marking equipment and MIL-SPEC materials to ensure all shipments are ready for transit. The services are designated for FOB Origin shipping to the Department of Defense DDSP New Cumberland Facility located in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488510, with a response deadline set for November 2, 2026.

Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

Bronze Valve Piston FabricationThis subcontract involves the precision fabrication of two bronze valve pistons for the Department of Defense, specifically for the DDSP New Cumberland Facility. The manufacturer is required to use precision CNC machining to produce the pistons according to Ammcon Corp part number BMC3479A part 12 specifications. All work must strictly adhere to RA001 DLA Technical and Quality Requirements and ensure that all materials used are mercury-free. The contract explicitly prohibits the use of unauthorized additive manufacturing processes. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

POSTED

about 9 hours ago

DEADLINE

Supply of Sauer Compressors Safety Relief ValveThis subcontract involves the procurement and delivery of one Sauer Compressors Safety Relief Valve, part number 033600 and NSN 4820-01-643-1766, to support prime contractors fulfilling DLA supply contracts. The completed component must be delivered to the DLA Distribution New Cumberland Facility in accordance with MIL-STD-129 and RP001 packaging and marking standards. The agreement mandates strict adherence to the Buy American Act and the Berry Amendment. Additionally, the provider must certify compliance regarding covered defense telecommunications equipment as specified in FAR 52.204-24. The opportunity is categorized under NAICS code 423830 and is managed by the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

IP042 Oxygen Cleaning and Military Packaging ServicesThis subcontract involves providing specialized IP042 oxygen clean processing and military-grade packaging services for prime contractors supporting Department of Defense supply contracts. The scope of work requires the removal of hydrocarbons through oxygen cleaning, the application of markings in accordance with MIL-STD-129, and final packaging following MIL-STD-2073-1E standards. The project entails the processing of 82 units, which must be cleaned, marked, and packaged within a dedicated oxygen-cleaning facility. Once completed, the units are to be delivered to the DLA Distribution DDSP New Cumberland facility located in New Cumberland, Pennsylvania.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Manufacturing of Regulating Element Flow ValvesThis subcontract with the Department of Defense DDSP New Cumberland Facility involves the manufacturing of 82 Regulating Element Flow Valves, specifically model YV4501. The scope of work requires precision CNC machining and the assembly of flow regulating elements equipped with small handwheel mechanisms in accordance with NSN 4820-01-428-6043. The contractor must ensure all materials are compliant with the Buy American Act and strictly adhere to prohibitions regarding the use of mercury and Class I ozone-depleting chemicals. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Needle Valve Stems (NSN 4810011806165)This subcontract involves the manufacture and supply of 41 precision-machined needle valve stems for prime contractors supporting the Department of Defense via the DDSP New Cumberland Facility. All components must strictly adhere to the technical specifications associated with NSN 4810011806165 and are to be produced using CNC lathes and mills. The contractor is responsible for ensuring that all units are packaged and palletized in full compliance with RP001 DLA Packaging Requirements for Procurement. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Safety Relief Valve Parts Kits (NSN 4820-01-522-5598)This subcontract involves the procurement or manufacture of 17 safety relief valve parts kits for prime contractors supporting the Department of Defense at the DDSP New Cumberland Facility. The kits must strictly adhere to Bauer Compressors, Inc. part number 014280 and NSN 4820-01-522-5598 specifications. All deliverables must be packaged and marked in accordance with MIL-STD-2073-1, MIL-STD-129, and DLA requirements RP001 and RA001. The completed kits are to be delivered FOB Origin to the performance location in New Cumberland.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Globe Valves (NSN 4820-01-411-4201)This subcontract with the Department of Defense DDSP New Cumberland Facility involves the procurement of 19 Globe Valves meeting NSN 4820-01-411-4201 specifications. The contractor is responsible for manufacturing or procuring the valves, with the possibility of utilizing additive manufacturing provided that ESA approval is obtained. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract is categorized under NAICS code 332911 and requires delivery of the packaged valves FOB Origin. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 22, 2026, with a response deadline set for November 2, 2026.

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Corrosion Resistant Steel Valve Seats (NSN 4820012122500)This subcontract involves the manufacture or procurement of 40 corrosion-resistant steel valve seats meeting NSN 4820012122500 specifications for prime contractors supporting Department of Defense DLA supply contracts. The production process requires precision machining to ensure all units adhere to strict technical standards. The contractor is responsible for packaging the units according to ASTM D3951 and applying markings in compliance with MIL-STD-129 and RP001 DLA Packaging Requirements. Final delivery of the 40 units is designated as FOB Origin to the DLA Distribution DSP New Cumberland Facility.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS