Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Ultrasonic Ocular Scanner Hardware Supply

Active

Federal

Response Deadline11/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of Defense agency W6QK Acc-Apg, involves the supply of four prototype standalone ultrasonic ocular scanner systems for U.S. Army prototype projects. The required hardware must support anatomical visualization of both anterior and posterior eye segments and perform IOL calculations using A-Scan, B-Scan, and UBM probes. Technical specifications mandate that the systems operate on 110-120 VAC at 60 Hz and maintain full compliance with MIL-STD-130N. To be eligible, providers must ensure the equipment is TAA compliant and holds either FDA 510(k) Class II approval or Class I registration. The project is categorized under NAICS code 334510, with the place of performance located in Frederick, Maryland. Interested parties must submit their responses by the deadline of November 3, 2026.

General Info

DoD subcontract for four prototype ultrasonic ocular scanner systems due November 3, 2026.

Agency

Department Of Defense → W6QK Acc-Apg

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus Manufacturing

Place of Performance

Frederick, MD, 21702, USA

Set-Aside

NONE

Documents

This scope was carved out of W91CRB-26-AWSP-Scanner-Ultrasonic-Ocular-RPP.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Scanner Ultrasonic Ocular

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 3

Submission deadline

Response Deadline

11/03/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QK Acc-Apg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies standalone ultrasonic ocular scanner systems for prime contractors on U.S. Army prototype projects. Provides systems capable of anatomical visualization of anterior/posterior eye segments and IOL calculations, including A-Scan, B-Scan, and UBM probes. Hardware must be 110-120 VAC (60 Hz) and MIL-STD-130N compliant. Requires FDA 510(k) Class II approval or Class I registration and TAA compliance. Delivers four prototype units.

Similar Contracts

Same NAICS industry code

Voltmeter Equipment Supplier (NSN 6625-01-392-6261)This subcontract involves the manufacture or procurement of six specialized voltmeters meeting NSN 6625-01-392-6261 specifications for the DLA Weapons Support Maritime Supply Chain. The supplier is responsible for ensuring all units are marked and labeled according to MIL-STD-129 and packaged in compliance with RP001 and RA001 standards. Additionally, the contractor must adhere to the Buy American Act and the Berry Amendment. The completed equipment must be delivered FOB Origin to DLA Distribution in Warner Robins, Georgia. This opportunity falls under NAICS code 334510 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

CADEX 7400 Battery Analyzer SupplierThis subcontract involves the procurement and delivery of one CADEX 7400 Battery Analyzer for prime contractors supporting Department of Defense supply contracts through the DDSP New Cumberland Facility. The supplier is responsible for ensuring the unit adheres to all DLA Master List technical and quality requirements, with performance taking place in New Cumberland, Pennsylvania. The contract mandates strict adherence to specific military standards, including sampling plans per MIL-STD-1916 or ASQ H1331 Table 1. Additionally, the supplier must comply with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging to ensure the analyzer is delivered fully completed and properly prepared.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

ANALYZER, BLOOD CHOLEST

Solicitation # SPE2DH-27-T-0248

This fixed-price solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of one blood cholesterol analyzer kit (NSN 6630-01-689-9343). The required AccuTrend Plus meter is a portable, lightweight device featuring an ergonomic design, a large display, and built-in self-testing safety features. Each kit must include the meter, manual, reference card, troubleshooting guide, four AAA batteries, and a carrying case. The delivery is required within 20 days after the order, with the place of performance located at Fort Campbell, Kentucky. The contract mandates strict adherence to medical packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial-grade, utilizing sealed unit containers and suitable exterior shipping containers to prevent damage. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Compliance with various FAR and DFARS clauses is required, including regulations regarding the Buy American Act, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 19 hours ago

DEADLINE

Medical-Grade Rehabilitation Treadmill System SupplierThis subcontract involves the supply and delivery of a commercial and medical-grade rehabilitation treadmill system for the Parkwood Institute, managed through Healthcare Materials Management Services. The selected supplier is responsible for providing a comprehensive hardware and software package designed for clinical gait training, mobility rehabilitation, and patient assessment. The scope of work requires the delivery of a fully functional and installed system. The contract mandates strict adherence to Canada’s Fighting Against Forced Labour and Child Labour in Supply Chains Act. Interested parties must submit their responses by November 13, 2026, for this project based in Canada under NAICS code 334510.

Healthcare Materials Management Services (HMMS)

POSTED

about 22 hours ago

DEADLINE

HMMS04746 - Advanced Contract Award Notice (ACAN) Rehabilitation Treadmill System

Solicitation # rfi_2037

Healthcare Materials Management Services (HMMS) issued Advanced Contract Award Notice HMMS04746 on October 22, 2026, to identify potential providers for a high-performance rehabilitation treadmill system for St. Joseph's Health Care London, Parkwood Institute in Ontario, Canada. The procurement specifically identifies the Mercury Med system by Atlas Medic as the intended solution for clinical gait training, mobility rehabilitation, assessment, and therapeutic applications. This notice serves as a market test to determine if other suppliers can meet the minimum technical requirements before HMMS proceeds with a sole-source award. The complete package must include all necessary hardware and software, installation, configuration, integration, and initial user training. Interested proponents must submit their responses online by November 13, 2026. Requirements for submission include technical specifications, product literature, equipment dimensions, patient weight capacity, a certificate of insurance, and three client references of similar scope along with two financial references. Proponents must warrant compliance with Canada's Fighting Against Forced Labour and Child Labour in Supply Chains Act and disclose any potential conflicts of interest or funding programs provided to HMMS. Additionally, the agency reserves the right to disqualify bidders defined as U.S. businesses, which are those headquartered in the United States with fewer than 250 full-time employees in Canada.

Healthcare Materials Management Services (HMMS)

POSTED

about 22 hours ago

DEADLINE

Mobile MRI Suite ProvisionThis subcontract opportunity, managed by the Department of Veterans Affairs through Pcac, involves the provision and setup of a temporary mobile MRI suite for prime contractors working on VA Medical Center facility projects in West Roxbury, Massachusetts. The selected provider will be responsible for the delivery, precise positioning, and coordination of all necessary utility connections to ensure the suite is fully operational on-site. Due to the nature of the equipment, the project requires the use of specialized transport and installation machinery. This opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 334510. The solicitation was posted on October 22, 2026, with a response deadline set for November 27, 2026.

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Scanner Ultrasonic Ocular

Solicitation # W91CRB-26-AWSP-Scanner-Ultrasonic-Ocular-RPP

The Portfolio Acquisition Executive Maneuver Ground Project Manager Maneuver Medical Devices is soliciting prototype proposals for a Scanner Ultrasonic Ocular device under Other Transaction Authority pursuant to 10 U.S.C. 4022. This effort is not a FAR-based contract and seeks to award two prototype agreements for the delivery and demonstration of devices capable of anatomical visualization of anterior and posterior eye segments, internal eye structure measurements, and intraocular lens calculations. The primary goal is to identify an FDA-approved commercial-off-the-shelf or non-developmental item that requires minimal modification. Selected awardees will deliver four prototype units for operational and environmental testing within 45 to 60 days of award, with a total estimated period of performance of twelve months. Successful prototype validation may lead to a follow-on production agreement for approximately ten additional units. The procurement is categorized under NAICS code 334510 and requires the system to be a standalone device compliant with NIST SP 800-171 and the Trade Agreements Act. Deliverables include technical manuals, on-site operator training, and ruggedized transport cases meeting MIL-STD-810H standards. Proposals are evaluated using a comparative best-value methodology, prioritizing technical approach, maturity, performance compliance, reliability, schedule realism, and past performance over cost. All tangible hardware must feature MIL-STD-130N compliant 2D Data Matrix marking. Proposals must be submitted as PDFs via DoD SAFE or secure email by November 3, 2026, adhering to strict page limits across four volumes.

POSTED

about 24 hours ago

DEADLINE

Supply of Ultrasonic Atomization PlatformThis subcontract involves the supply of a specialized Ultrasonic Atomization Platform for prime contractors working on projects at Southern University at Baton Rouge. The provider is responsible for delivering the operational platform along with comprehensive technical documentation, including detailed responses to specification paragraphs, descriptive literature, and technical data to ensure quality verification. Additionally, the provider must outline all necessary utility and service requirements essential for the system's operation. Logistical responsibilities include the coordination of shipping and the provision of critical data such as shipping weights and the designated FOB point. The opportunity was posted on October 22, 2026, with a response deadline of November 5, 2026. This procurement falls under NAICS code 334510 and is managed through the state of Louisiana.

Southern University at Baton Rouge

POSTED

DEADLINE

Automated Traffic Monitoring Equipment SupplierThis subcontract for an Automated Traffic Monitoring Equipment Supplier involves providing essential hardware and software for automated data collection on Regional Transportation District PnR projects. The scope of work includes the delivery of video-based collection systems, AI-driven image processing software for counting pedestrians and vehicles, and specialized monitoring equipment to track the accumulation of motor vehicles and bicycles. All provided equipment and software licenses must adhere to strict RTD data validation and quality standards. Managed under the Planning agency in Colorado, the opportunity is categorized under NAICS code 334510. Interested parties must submit their responses by the deadline of November 20, 2026. The contract focuses on supporting prime contractors through the deployment of advanced technological tools to ensure accurate traffic and transit data collection.

POSTED

DEADLINE

Submit one complete bid in a sealed, opaque envelope or package. The exterior must be clearly marked SEALED BID - KDMC TELEMETRY SYSTEM - DO NOT OPEN and must identify the bidder. A searchable PDF copy may be included on a USB drive inside the sealed

Solicitation # KDMC-RHTP-TELEMETRY

King's Daughters Medical Center (KDMC) is soliciting firm-fixed price bids under solicitation KDMC-RHTP-TELEMETRY for a turnkey, hospital-wide telemetry and patient monitoring system in Brookhaven, Mississippi. The project requires the contractor to furnish, install, configure, integrate, and support a complete system, including 28 wearable wireless transmitters, 34 bedside monitors, 36 transport-capable modules, and a redundant virtualized central monitoring architecture. A critical requirement is the seamless integration with the Meditech electronic medical record environment and adherence to strict cybersecurity standards, including the provision of a machine-readable Software Bill of Materials. The entire project, including final invoicing, must be completed and accepted by June 30, 2027. Bids must be submitted in a sealed, opaque envelope marked SEALED BID - KDMC TELEMETRY SYSTEM - DO NOT OPEN by the deadline of October 28, 2026. Award will be granted to the responsible bidder offering the lowest responsive bid, with mandatory technical, clinical, and cybersecurity requirements evaluated on a pass/fail basis. The contractor is responsible for all low-voltage cabling, labeling, and asset records, and must provide clinical super-user training. Final acceptance is contingent upon 30 consecutive days of stable production operation and the successful closure of all technical and clinical validation tests. Compliance with federal standards, including SAM.gov exclusion verification and specific environmental and labor acts for contracts exceeding certain thresholds, is mandatory.

POSTED

DEADLINE

PINPOINT SIGMA SYS Manufacturing/SupplyThis subcontract involves the manufacturing and supply of the complete PINPOINT SIGMA SYS for prime contractors supporting DLA Mechanicsburg. The selected provider is responsible for procuring or manufacturing integrated hardware, software, and firmware in strict accordance with technical requirements, while maintaining the total equipment baseline configuration and conducting plant quality assurance. The final deliverable consists of one fully inspected and packaged unit. Compliance is a critical component of this effort, requiring the contractor to hold CMMC Level 1 certification. Additionally, all work must adhere to specific military standards, including MIL-STD-973, MIL-STD-130, MIL-STD-129, and MIL-STD-2073-1. The opportunity falls under NAICS code 334510 and is managed by the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

FAULTFINDER ETS SYS Manufacturing/SupplyThis subcontract involves the manufacturing and supply of the complete FAULTFINDER ETS SYS for prime contractors supporting DLA Mechanicsburg. The scope of work includes the procurement or manufacture of integrated hardware, software, and firmware in strict accordance with technical requirements. The contractor is responsible for maintaining the total equipment baseline configuration and conducting comprehensive plant quality assurance to ensure the delivery of one fully inspected and packaged unit. Compliance is a critical component of this contract, requiring the provider to maintain CMMC Level 1 certification. Additionally, all deliverables must adhere to specific military standards, including MIL-STD-973, MIL-STD-130, MIL-STD-129, and MIL-STD-2073-1. The project falls under NAICS code 334510 and is managed through the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Apg

Same awarding agency

Supply of Mechanical De-reefer DevicesThis subcontract, issued by the Department of Defense through the U.S. Army Contracting Command-Aberdeen Proving Ground, requires the procurement and supply of 40 new Mechanical De-reefer Devices for Foreign Military Sales projects. The contractor is responsible for manufacturing or procuring new units, with a strict prohibition against the use of remanufactured or gray market items. All materials must be Berry Amendment compliant, and the provider must submit a side-by-side characteristic comparison for any equivalent products offered. The project is designated as a Total Small Business Set Aside under NAICS code 333998. The final deliverables include 40 warranted devices packaged for pickup within the continental United States, with the place of performance located in New Cumberland, Pennsylvania. The solicitation was posted on October 22, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 24 hours ago

DEADLINE

Defense Logistics Data & NSN Generation ServicesThe Defense Logistics Data and NSN Generation Services subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, focuses on the collection and formatting of critical logistics data for U.S. Army medical device projects. The primary objective is to enable the generation of National Stock Numbers by developing comprehensive Bills of Materials and documenting CAGE codes and part numbers for entire systems and their respective repair parts. All work must adhere to Department of Defense logistics data standards, culminating in the delivery of a provisioning data package per ADRL A-006. This opportunity falls under NAICS code 541614 and is designated for performance in Frederick, Maryland. Interested parties should note the posting date of October 22, 2026, with a response deadline set for November 3, 2026.

Process, Physical Distribution, and Logistics Consulting Services

POSTED

about 24 hours ago

DEADLINE

NIST SP 800-171 Cybersecurity ConsultingThis subcontract opportunity, titled NIST SP 800-171 Cybersecurity Consulting, involves providing specialized cybersecurity assessments and Authority to Operate documentation for prime contractors working on U.S. Army medical device projects. The selected provider will be responsible for ensuring system compliance with NIST SP 800-171 standards and supporting Risk Management Framework activities in close coordination with PM M2S personnel. Key technical requirements include the use of cybersecurity auditing tools to validate security controls and the delivery of final compliance certifications. Managed under the Department of Defense through agency W6QK Acc-Apg, the work is designated under NAICS code 541512 and will be performed in Frederick, Maryland. Interested parties must submit their responses by November 3, 2026, to support these critical security initiatives for Army medical systems.

Computer Systems Design Services

POSTED

about 24 hours ago

DEADLINE

Medical Device Technical Writing and Training ServicesThe Medical Device Technical Writing and Training Services subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, requires the authoring of technical manuals and training materials for U.S. Army medical device projects. The selected provider will develop physical and digital User, Operator, Maintenance, and Service manuals, as well as operational training videos or digital sites. All content must adhere to OEM standards specifically tailored for military Biomedical Equipment Technician personnel, with final deliverables submitted according to ADRLs A-004 and A-009. This opportunity is categorized under NAICS code 541430 and will be performed in Frederick, Maryland. Interested parties must submit their responses by November 3, 2026, at 5:00 PM.

Graphic Design Services

POSTED

about 24 hours ago

DEADLINE

MIL-STD-810H Ruggedized Case SupplyThis subcontract, managed by the Department of Defense under agency W6QK Acc-Apg, involves the design and manufacture of ruggedized transport cases for U.S. Army medical device projects. The contractor is responsible for producing custom-fitted cases utilizing high-impact polymers and specialized foam inserts to ensure the stability of medical equipment during military transit. All deliverables must strictly adhere to MIL-STD-810H environmental and durability standards to withstand rigorous operational conditions. The scope of work specifically requires the delivery of ruggedized cases for four prototype units, with performance taking place in Frederick, Maryland. Interested parties should note the response deadline of November 3, 2026. This effort falls under NAICS code 326199, focusing on the specialized production of protective housing for critical medical technology.

All Other Plastics Product Manufacturing

POSTED

about 24 hours ago

DEADLINE

Mechanical De-reefer Device

Solicitation # W91CRB-27-Q-DEREEFER

The U.S. Army Contracting Command-Aberdeen Proving Ground is soliciting quotes for a commercial firm-fixed-price contract to procure forty new Mechanical De-reefer Devices. This procurement supports Foreign Military Sales to the Government of the Arab Republic of Egypt under Case EG-B-VRH. The acquisition is a total small business set-aside under NAICS code 334511. All provided equipment must be new, covered by a manufacturer warranty, and Berry Amendment compliant. Remanufactured or gray market items are strictly prohibited. Award will be based on the Lowest Priced Technically Acceptable approach, evaluating technical capabilities and past performance on an acceptable or unacceptable basis. Offerors must be actively registered in the System for Award Management and provide their Unique Entity Identification code with their submission. The vendor is not responsible for delivery but must prepare the shipment for pickup at a location within the continental United States and coordinate with a government-funded freight forwarder. Quotes are due by November 4, 2026, and must include a proposed delivery date and a side-by-side characteristic comparison if an alternate or equal product is offered.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 24 hours ago

DEADLINE

TAA-Compliant Medical Component SupplierThis subcontract through the Department of Defense involves the supply of internal electronic and mechanical components for U.S. Army medical device projects. The scope of work focuses on the manufacture of power modules, circuit boards, and ultrasound transducers utilizing piezoelectric materials and medical-grade electronics. Performance will take place at Aberdeen Proving Ground under NAICS code 334111. A critical requirement of this agreement is strict adherence to the Trade Agreements Act. The supplier must provide full Country of Origin certification and deliver a Trade Agreements Certificate alongside all compliant components. The solicitation was posted on October 21, 2026, with a response deadline of November 6, 2026.

Electronic Computer Manufacturing

POSTED

DEADLINE

BMET Certification & Clinical Training ProviderThis subcontract opportunity, managed by the Department of Defense under agency W6QK Acc-Apg, seeks a provider to deliver specialized BMET Certification and Clinical Training. The selected contractor will perform on-site training for prime contractors involved in U.S. Army medical device projects, specifically focusing on certifying military Biomedical Equipment Technicians to OEM-equivalent standards for the maintenance and calibration of USHC prototype units. The scope of work involves conducting training sessions within the continental United States, with the primary place of performance located at Aberdeen Proving Ground. The ultimate objective of the contract is the successful delivery of completed training sessions and the formal certification of military BMET personnel. Interested parties should note the response deadline of November 6, 2026.

Other Technical and Trade Schools

POSTED

DEADLINE

Ultrasound Diagnostic Software ProviderThis subcontract opportunity with the Department of Defense, managed by W6QK Acc-Apg, seeks a provider of specialized diagnostic software and imaging algorithms to support prime contractors on U.S. Army medical device projects. The required software must support advanced imaging capabilities, including live color Doppler, HD Flow, Power Doppler, Pulse Wave Doppler, and Continuous Wave Doppler. The selected provider will be responsible for delivering software licenses and installing the diagnostic software on prototype units. A critical requirement for this contract is that the software and device combination must obtain FDA 510(k) clearance. The work will be performed at Aberdeen Proving Ground under NAICS code 513210. Interested parties must respond by November 6, 2026.

Software Publishers

POSTED

DEADLINE

Ruggedized Hardened Transport Case ProviderThis subcontract opportunity with the Department of Defense, managed by W6QK Acc-Apg, seeks a provider to supply and modify hardened transport cases for prime contractors working on U.S. Army medical device projects. The scope of work involves the design and manufacture of protective cases featuring custom foam inserts, high-impact polymers, and water-resistant seals. Specifically, the contractor must deliver two ruggedized transport cases configured for the USHC system that adhere to MIL-STD-810H environmental testing standards. The project will be performed at Aberdeen Proving Ground under NAICS code 339999. Interested parties should note that the solicitation was posted on October 21, 2026, with a response deadline of November 6, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

MIL-STD Environmental Testing LaboratoryThis subcontract opportunity involves providing independent validation and testing services for prime contractors supporting US Army C5ISR Center UAS projects. The selected provider will perform critical MIL-STD-810 testing, specifically focusing on temperature, shock, and vibration, alongside water ingress and pull-force mechanical stress evaluations. These operations require the use of specialized equipment, including vibration tables and environmental chambers, to ensure all hardware meets rigorous military standards. The work will be performed at Aberdeen Proving Ground under NAICS code 541380 for the Department of Defense. A mandatory requirement for this contract is ISO/IEC 17025 accreditation to ensure the quality and competence of the laboratory testing. The primary deliverables for this engagement include the provision of certified test reports and formal validation certificates.

Testing Laboratories and Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS