Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CALIBRATING GAS MIXTUR

Active
SPE4A6-26-T-22AWFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of ammonia gas (NH3) 50ppm with a nitrogen balance, supplied in 58-liter cylinders. The item is identified as a commercial off-the-shelf product with a non-extendable shelf life of 18 months. The agreement covers multiple line items, each for a quantity of one cylinder, to be delivered to various destinations including Scott AFB, Tampa, Andersen AFB, Dover AFB, Little Rock AFB, and Al Udeid AB. Key requirements include strict adherence to hazardous materials shipping and packaging standards, specifically DOT for domestic and UN international requirements. Safety Data Sheets and OSHA hazard warning labels must be approved by technical personnel prior to award. The contract specifies a delivery window of 20 days, with a required delivery date of August 24, 2026. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplies.

General Info

Procurement of ammonia gas cylinders for multiple military bases by August 24, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

325120 - Industrial Gas ManufacturingView NAICS

Place of Performance

BLDG/FLOOR BLD RM/SUITE P49, TAMPA, FL, 33621-5552, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-22AW.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Briana Covington
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CALIBRATING GAS MIXTURE
CALIBRATING GAS MIXTURE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
"SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS
AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY
CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND
LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO
THE DLA AVIATION HMIRS OFFICE (VBA)."
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RS013: Shelf-life requirement RS001 for a TYPE I (CODE K) item with a shelf life of 18 months (non-extendable) applies to this item.
SPE4A6-26-T-22AW
SECTION B
GAS, AMMONIA (NH3) 50PPM WITH NITROGEN BALANCE, CYLINDER DIMENSIONS: 5"
X 14", 58L.
PROPER SHIPPING NAME: COMPRESSED GASES, N.O.S.
HAZARD CLASS NUMBER AND DESCRIPTION: 2.2 (NON-FLAMMABLE GAS)
UN IDENTIFICATION NUMBER: UN 1956
DOT LABEL(S) REQUIRED: NON-FLAMMABLE GAS DOT-39 CYLINDER
UNIT OF ISSUE = EACH (EA), ONE EA EQUATES TO A CYLINDER THAT CONTAINS
58.0 LITERS.
HONEYWELL INTERNATIONAL INC. 65507 P/N 600-0058-000
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017982076 0001 EA 1.000
NSN/MATERIAL:6830016093728
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IN THE CLEAR:
FB4407 375 LRS LGRDDC
102 S ADAMS ST BLDG 4010
SPE4A6-26-T-22AW
SECTION B
PR: 7017982076 PRLI: 0001 CONT’D
MARK FOR: SSGT WILLIAM COLE 618-256-4831
WILLIAM.COLE.12@US.AF.MIL
SCOTT AFB IL 62225
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) FB48196231ATQE
RDD:
PROJ: CXR TP 3
SUPP ADD: FB4407 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A0E DIST: 4 ADV: 2L FC: 30
Need Ship Date:00/00/0000 Original Required Delivery Date:08/24/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017967324 0001 EA 1.000
NSN/MATERIAL:6830016093728
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
SPE4A6-26-T-22AW
SECTION B
PR: 7017967324 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB4814
FB4814 6 LRS LGRDDC
8307 CYPRESS STAND DR CP 8288131800
BLDG/FLOOR BLD RM/SUITE P49
TAMPA FL 33621-5552
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4814
FB4814 6 LRS LGRDDC
CP (813) 828-8874
8307 CYPRESS STAND DR SUITE P49
TAMPA FL 33621
US
M/F: (TCN) FB48196231ASLE
RDD:
PROJ: CXR TP 3
SUPP ADD: FB4814 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A0A DIST: 4 ADV: 2L FC: 30
Need Ship Date:00/00/0000 Original Required Delivery Date:08/24/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-22AW
SECTION B
PR: 7017981972 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017981972 0001 EA 1.000
NSN/MATERIAL:6830016093728
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE
PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT
SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
SPE4A6-26-T-22AW
SECTION B
PR: 7017981972 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE
PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT
SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IN THE CLEAR:
FB5240 36 LRS LGRM
ANDERSEN AFB BLDG 18002
MARK FOR BRIANNA R. PICKENS
BRIANNA.PICKENS@US.AF.MIL 671-362-6618 FE5240
YIGO GU 96929
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
M/F: (TCN) FB48196231AR8E
RDD:
PROJ: CXR TP 3
SUPP ADD: FB5240 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A05 DIST: 4 ADV: 2L FC: 30
Need Ship Date:00/00/0000 Original Required Delivery Date:08/24/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7017981920 0001 EA 1.000
NSN/MATERIAL:6830016093728
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE4A6-26-T-22AW
SECTION B
PR: 7017981920 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE
PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT
SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
SPE4A6-26-T-22AW
SECTION B
PR: 7017981920 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE
PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT
SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IN THE CLEAR:
FB4497 436 LRS LGRS TRT IRP
639 EVREUX ST BLDG 639 DR 8
MARK FOR SSGT JUSTIN HANBERRY / 302-677-5636
JUSTIN.HANBERRY@US.AF.MIL
DOVER AFB DE 199025139
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) FB48196231ATDE
RDD:
PROJ: CXR TP 3
SUPP ADD: FB4497 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A0E DIST: 4 ADV: 2L FC: 30
Need Ship Date:00/00/0000 Original Required Delivery Date:08/24/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0005 7017981975 0001 EA 1.000
NSN/MATERIAL:6830016093728
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPE4A6-26-T-22AW
SECTION B
PR: 7017981975 PRLI: 0001 CONT’D
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE
PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT
SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
SPE4A6-26-T-22AW
SECTION B
PR: 7017981975 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE
PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT
SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IN THE CLEAR:
FB4460 19 LRS LGRDDC
450 3RD ST
MARK FOR: KEVIN GARZA (501)-987-2908
KEVIN.GARZA.5@US.AF.MIL
LITTLE ROCK AFB AR 72099
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) FB48196231AT5E
RDD:
PROJ: CXR TP 3
SUPP ADD: FB4460 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A0E DIST: 4 ADV: 2L FC: 30
Need Ship Date:00/00/0000 Original Required Delivery Date:08/24/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-22AW
SECTION B
PR: 7017967318 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0006 7017967318 0001 EA 1.000
NSN/MATERIAL:6830016093728
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE4A6-26-T-22AW
SECTION B
PR: 7017967318 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE
PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT
SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGE IAW DOT FOR DOMESTIC SHIPMENTS. EXPORT SHIPMENTS SHALL BE PACKAGED IAW UN INTERNATIONAL REQUIREMENTS. DOMESTIC AND EXPORT SHIPMENTS SHALL BE MARKED/LABELED IAW MIL-STD-129 MARKING REQUIREMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
SPE4A6-26-T-22AW
SECTION B
PR: 7017967318 PRLI: 0001 CONT’D
IN THE CLEAR:
FB4804 USCENTCOM US AIR FORCE 379
5452 PRECISION AND POWER DRIVE
A1C PEIXOTO, HUNTER 318-455-2156
HUNTER.PEIXOTO@US.AF.MIL
AL UDEID AB QA 00000 QA
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
M/F: (TCN) FB48196231AUME
RDD:
PROJ: CXR TP 3
SUPP ADD: FB4804 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A05 DIST: 4 ADV: 27 FC: 30
Need Ship Date:00/00/0000 Original Required Delivery Date:08/24/2026

SPE4A6-26-T-22AW NSN/Part Number: 6830-01-609-3728 Quantity: 1 EA Purchase Request: 7017967318QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325120
New
DIBBS
CALIBRATING GAS MIXTUR
Solicitation # SPE4A6-26-T-22AR
This contract is for the procurement of a non-flammable calibrating gas mixture consisting of nitrogen and 10 ppm hydrogen cyanide, identified by NSN 6830016088520. The gas is supplied in 58-liter DOT-39 cylinders and is classified as a commercial off-the-shelf item. The agreement includes six separate line items, each for one unit, to be delivered to various destinations including Andersen AFB, Langley AFB, Al Udeid AB, Scott AFB, Dover AFB, and a facility in Tampa, Florida. The original required delivery date for these items is August 24, 2026, with a delivery window of 20 days. The contract mandates strict adherence to hazardous materials communication standards, requiring approved Safety Data Sheets and hazard warning labels. Technical requirements include a non-extendable shelf life of 18 months and a prohibition on the intentional addition of mercury. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, with specific instructions for palletization using Load Type IX if standard fiberboard boxes are unsuitable. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and all deliveries are set as FOB Destination.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325120
New
DIBBS
CALIBRATING GAS MIXTUR
Solicitation # SPE4A6-26-T-22AS
This contract is for the procurement of a calibrating gas mixture consisting of 10ppm chlorine balanced with nitrogen, supplied in 58-liter cylinders with male regulator solutions. The item is classified as a commercial off-the-shelf product with a non-extendable shelf life of nine months. The agreement covers multiple line items for delivery to various Air Force bases, including locations in Arkansas, Delaware, Guam, Illinois, and Qatar, with a required delivery date of August 24, 2026. Strict compliance is required for hazardous materials handling, including the provision of approved SDS and OSHA hazard warning labels. Packaging and marking must adhere to MIL-STD-129 and DOT or UN international requirements, with specific instructions for palletization via MIL-STD-147 if standard fiberboard boxes are unsuitable. The contract specifies a delivery timeframe of 20 days and mandates the use of traceable shipping means, explicitly prohibiting the use of parcel post.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325120
New
Federal
68--RFI for Laboratory Gases
Solicitation # 68HE0726R0035
The Environmental Protection Agency Region 7 Contracting Office has issued a Request for Information regarding the procurement of laboratory gases under solicitation number 68HE0726R0035. This sources sought notice is categorized under NAICS code 325120, which pertains to the manufacture of basic chemical manufacturing. The primary place of performance for this requirement is located in Kansas City, Kansas, with the contracting office based in Lenexa, Kansas. Interested parties must submit their responses by the deadline of September 4, 2026, at 3:00 PM. The solicitation was officially posted on August 24, 2026, to identify potential sources capable of meeting the agency's needs. For inquiries or further information regarding this request, the designated point of contact is Arlo Hurst, who can be reached via email or telephone.
Region 7 Contracting Office

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 325120
New
Federal
124th Liquid Nitrogen Generator
Solicitation # W50S7326QA002
The 124th Liquid Nitrogen Generator contract is a small business set-aside solicitation issued by the Department of Defense under the office of W7M5 Uspfo Activity Idang 124 located in Boise, Idaho. The solicitation, identified by number W50S7326QA002, was posted on July 10, 2026, and responses are due by August 17, 2026, at 10:00 PM Eastern Time. The contract falls under NAICS code 336413, which pertains to the manufacturing of other transportation equipment, and is structured as a combined action to streamline the procurement process. The opportunity is fully reserved for small businesses, as defined by the Small Business Administration, ensuring only eligible small entities may compete. The equipment is required for performance at the same Boise, Idaho location, with no mention of alternate or multiple delivery sites. Primary point of contact is Treyvlin Jones, reachable via email and phone, with Jeffrey DeHaven serving as the secondary contact for additional inquiries. All submissions and information must be processed through the official SAM.gov portal linked in the solicitation.
W7M5 Uspfo Activity Idang 124

POSTED

about 22 hours ago

DEADLINE

in 3 days
View Details
NAICS: 325120
New
SLED
27-0081 MONTHLY - GAS TANKS
Solicitation # RFB-IS-27200116
The County of Los Angeles has issued a solicitation for the monthly supply of gas tanks under tender number RFB-IS-27200116. This contract focuses on providing various laboratory gases, specifically including argon, carbon dioxide, helium, hydrogen, and nitrogen. The procurement process is managed by the County of Los Angeles, with the performance of the contract centered in Los Angeles. Interested vendors must submit their responses by the closing deadline of September 9, 2026, at 12:00 PM. Prospective bidders are advised that they may need to register on the official County of Los Angeles website to participate in this opportunity. For specific inquiries regarding the language or content of the bid, vendors should contact the designated representative, Li Zhu, via the provided contact information.
County of Los Angeles

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 325120
New
Federal
RFI for Laboratory Gases
Solicitation # 68HE0726R0035
The Environmental Protection Agency Region 7 has issued a Request for Information regarding the procurement of laboratory gases under solicitation number 68HE0726R0035. This sources sought notice is intended to gather information from potential vendors capable of providing these specialized gases, categorized under NAICS code 325120. The procurement process is being managed by the agency's office in Lenexa, Kansas, with the place of performance designated for Kansas City. Interested parties must submit their responses by the deadline of September 4, 2026, at 3:00 PM. The primary point of contact for this solicitation is Contracting Officer Arlo Hurst, who can be reached via email for official inquiries. Prospective respondents should utilize the provided FedConnect link to access necessary documentation and ensure compliance with the submission requirements.
Region 7

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 325120
New
DIBBS
SENCER OXYGEN
Solicitation # SPE4A5-26-T-384C
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of SENCER OXYGEN, identified by NSN/Part Number 6680-01-154-7845. The contract, tracked under solicitation number SPE4A5-26-T-384C and purchase request 7017864585, calls for a quantity of one unit. This federal procurement is categorized as a solicitation with a posting date of August 23, 2026, and requires a response by the deadline of August 31, 2026. The procurement process is managed through the Defense Logistics Agency to support Department of Defense requirements. Interested parties can access further details and submit documentation through the provided DIBBS link. No specific set-aside designations or NAICS codes are listed in the current contract data, indicating a standard federal solicitation for the specified oxygen component.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325120
New
Federal
68--CALIBRATING GAS MIXTUR
Solicitation # SPE2DP26T4718
This procurement request, solicitation number SPE2DP26T4718, is issued by the DLA Troop Support for the acquisition of 150 units of calibrating gas mixture, identified by NSN 6830016423624. The contract is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 325120. Delivery is required to DLA Distribution San Joaquin within 53 days after receipt of the order. The solicitation is conducted as a Request for Quote, with all submissions required to be sent electronically by the deadline of August 26, 2026. While an approved source is listed as 1CEG4, all responsible sources are invited to submit quotes. Detailed specifications and drawings are not provided, and the solicitation is available exclusively through the provided electronic link.
DLA Troop Support

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 325120
New
Federal
6830--Research Gas
Solicitation # 36C26027Q0024
The Department of Veterans Affairs, through the Network Contract Office 20, has issued a solicitation for Research Gas under solicitation number 36C26027Q0024. This procurement is designated as a total Small Business Set-Aside, meaning it is reserved exclusively for small businesses. The contract falls under NAICS code 325120, which pertains to basic chemical manufacturing. The place of performance for this requirement is located in Portland, Oregon. Interested parties must submit their responses by the deadline of September 4, 2026, at 7:00 PM. The solicitation was officially posted on August 21, 2026. For inquiries regarding this opportunity, the primary point of contact is Contracting Officer Nazanin Kreiner, who can be reached via email or telephone. All formal submissions and detailed documentation should be managed through the official government procurement channels provided in the solicitation.
260-NETWORK Contract Office 20 (36C260)

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 325120
New
Federal
Medical Gas Services for Pine Ridge IHS Hospital
Solicitation # 75H70626Q00226
The Great Plains Area Indian Health Service intends to award a firm-fixed-price contract for medical gas services at the Pine Ridge IHS Hospital in South Dakota. This requirement includes providing medical gas for a bulk oxygen system, as well as the rental of cylinders and the supply of medical gas. The contract is a 100% small business set-aside under NAICS code 325120 and is structured with a 12-month base period followed by four 12-month option periods. The award will be made using the Lowest Price Technically Acceptable (LPTA) method, evaluating proposals based on technical capability, past performance, and price. To be considered, offerors must demonstrate a technical approach that meets all performance work statement requirements, provide proof of medical gas transport licensure, and submit at least three relevant past performance references from the last three years. Quotes must be submitted electronically by August 31, 2026, at 12:00 pm MST and must include all-inclusive pricing, technical descriptions, and a statement of price firmness for at least 60 days. All successful contractors must be registered in the System for Award Management (SAM) and will be required to use the Invoice Processing Platform (IPP) for electronic invoicing.
Great Plains Area Indian Health Svc

POSTED

4 days ago

DEADLINE

in 6 days
View Details
NAICS: 325120
New
SLED
Calibration Gas Supply
300 Sower Blvd.

POSTED

4 days ago

DEADLINE

in 28 days
View Details
NAICS: 325120
New
Federal
Medical Gases and Cylinders (Tiered) - VISN23
Solicitation # 36C26326Q0197
This solicitation, identified as 36C26326Q0197, seeks quotes for the provision of medical gases and cylinders to multiple facilities within Veterans Integrated Service Network 23 under a firm-fixed-price, five-year IDIQ contract. The procurement is conducted under FAR Part 12 simplified acquisition procedures and is structured as a total set-aside for Service-Disabled Veteran-Owned Small Businesses using a tiered, cascading evaluation process that prioritizes certified SDVOSBs first, followed by certified small businesses, and then other-than-small businesses, with award made to the lowest-priced technically acceptable offer within the highest eligible tier. All offerors must be registered and active in the System for Award Management (SAM) and must meet the NAICS code 325120 size standard of 1,200 employees. The primary place of performance is Eagan, Minnesota, with delivery required across VA medical facilities in Minnesota, North Dakota, and South Dakota. Quotes must be submitted electronically via email to Emanuel Nevarez, Contract Specialist, by 13:00 CST on August 22, 2026, and technical inquiries must be submitted by 11:00 CST on August 3, 2026. No specific pricing, contractual line items, or detailed delivery schedules are provided beyond the overall five-year duration, and while the solicitation references additional requirements in the attached RFQ document, these are not included in the available data. Acceptance of quotes is the responsibility of the Government, and compliance with federal acquisition regulations, including responsible contractor status and accurate socioeconomic representation, is mandatory. No COTR, COR, payment details, invoicing methods, or specific packaging and inspection standards are specified in the provided information, and the full scope of technical and administrative requirements remains in the unattached solicitation document.
Network Contract Office 23 (36C263)

POSTED

5 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-15WU
Solicitation SPE4A6-26-T-15WU, issued by the DLA Aviation ASC Commodities Division, is a request for 1,477 threaded pin-rivets under NSN 5320014527666. This critical application item is identified as a commercial off-the-shelf product and requires a manufacturer Certificate of Compliance conforming to DI-MISC-81356, along with documentation substantiating traceability to the certified lot. Due to the nature of the item, casting or forging may be required, and offerors are directed to authorized manufacturers or the DLA Casting and Forging Assistance Request process for sourcing and tooling information. The contract specifies a delivery window of 100 days after receipt of order, with a need ship date of November 29, 2026, and a required delivery date of January 3, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and compliance with the Berry Amendment and Buy American Act.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 7 hours
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNLOCK
Solicitation # SPE4A6-26-T-16DP
Solicitation SPE4A6-26-T-16DP is a request for quotations issued by the Department of Defense ASC Commodities Division for the procurement of 1,152 units of Stud Assembly, Turnlock Fasteners (NSN 5325011695657). The requirement is for a critical application item with a delivery schedule of 112 days after receipt of order, with an original required delivery date of August 12, 2026. Delivery is specified as FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging via ASTM D3951 and RP001, and marking per MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance at the destination point. Security and compliance obligations include CMMC Level 2 self-assessment, safeguarding of covered defense information, and adherence to OSHA hazard communication standards. All submissions must be processed electronically through the DLA Internet Bid Board System (DIBBS), and post-award invoicing must be conducted via the Wide Area WorkFlow (WAWF) system.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 7 hours
View Details
NAICS: 332510
New
DIBBS
PIN, SHOULDER, HEADLE
Solicitation # SPE4A6-26-T-21SZ
This solicitation is for the procurement of 10 headless shoulder pins under contract number SPE4A6-26-T-21SZ for the Department of Defense ASC Commodities Division. The delivery requirement is 20 days after receipt of order, with the place of performance located in Keyport. The procurement is governed by DLA packaging requirements and technical quality standards found in the DLA Master List, with sampling methods adhering to MIL-STD-1916 or ASQ H1331. The contract includes strict security and regulatory compliance mandates, including CMMC Level 2 certification and the protection of covered defense information. Due to the nature of the technical data, the item is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the necessary data.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-21UR
This contract is a solicitation for the procurement of four units of a closing assembly handle for a nose landing gear kneeling door, identified by NSN/Part Number 0001S00000052. Issued by the Department of Defense ASC Commodities Division, the contract requires delivery within 590 days after receipt of order. Performance is centered at Robins Air Force Base, and the procurement falls under NAICS code 336413. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, physical identification, and bare item marking standards. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with zero-based sampling generally required. Additionally, the contract is subject to rigorous export controls under ITAR and EAR regulations, requiring contractors to have approved JCP certification and completed specialized training to access technical data.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-15WY
Solicitation SPE4A6-26-T-15WY is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 890 units of Collar, Pin-Rivet (NSN 5320016230156). This critical application item must be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB, with a required delivery date of March 7, 2027, and a lead time of 197 days after receipt of order. The procurement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105, with an expected award basis of Lowest Price Technically Acceptable. The contract mandates strict adherence to quality and technical standards, including sampling per MIL-STD-1916 or ASQ H1331 and packaging according to ASTM D3951 and RP001. Marking and labeling must comply with MIL-STD-129, and physical identification is required per RQ017. Key regulatory requirements include DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.223-7001 for hazardous material warning labels. Inspection and acceptance will occur at the destination. All quotations must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by August 25, 2026.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 7 hours
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-21WN
Solicitation SPE4A6-26-T-21WN is a federal requirement for 20 shear bolts, identified as item 5306 / 8019754. A critical requirement of this contract is the delivery of one first article unit to Hill Air Force Base within 120 calendar days for government testing. The government will notify the contractor of approval or disapproval within 150 days of receipt. These first article units are not part of the final production quantity and will be retained by the government as manufacturing standards or destroyed during testing. Offerors must comply with domestic material restrictions, including the Berry Amendment and the Buy American Act, and must certify that no covered telecommunications equipment or services will be provided. Additionally, contractors are required to register via the Account Management and Provisioning System to access the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized. Quotes should be submitted via DIBBS by September 1, 2026, and offerors are encouraged to provide quantity ranges to accommodate potential demand volatility.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334514
New
DIBBS
GAGE ROD, LIQUID LEV
Solicitation # SPE4A6-26-T-21UD
This contract is for the procurement of five liquid level gage rods, identified by NSN 6680017223486 and part number 100893 from American Metal Bearing Co. Each of the five line items consists of one unit to be delivered to different naval vessels, including the USS Chung Hoon, USS Gravely, USS Jack H. Lucas, USS Daniel Inouye, and USS Mustin. The required delivery dates range from August 4 to August 18, 2026, with a delivery timeframe of 20 days. The terms specify FOB Destination for all shipments, with inspection and acceptance also occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with a specific prohibition on the use of mercury or mercury compounds in preservation and packaging. All shipments must follow DLA packaging requirements and be sent via the fastest traceable means where specified.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-21YC
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 12 sleeve bushings under NSN 3120-01-491-2867. The contract requires delivery within 158 days after the order is placed and is categorized under NAICS code 332991. The place of performance is located in New Cumberland, Pennsylvania. The contract mandates strict adherence to several technical and quality requirements, including CMMC Level 2 certification for third-party assessment organizations and specific DLA packaging and marking standards. Notably, the item is subject to stringent export controls under ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access technical data. Inspection and acceptance will occur at the origin.
Ball and Roller Bearing Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
BRUSH, ELECTRICAL CONTA
Solicitation # SPE4A6-26-T-21KY
This contract is for the procurement of electrical contact brushes, specifically part number SRP-L-11-STR from Shaft Current Solutions, Inc., under NSN 5977015183353. The agreement consists of three line items totaling 34 units, distributed across different delivery locations including Sasebo Japan, the USS Zumwalt, and the USS Lyndon B. Johnson. Delivery is required within five days, with required delivery dates ranging from March to August 2026. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, packaging, and marking processes, except for specific functional exceptions.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332991
New
DIBBS
BALL SET, BEARING
Solicitation # SPE4A6-26-T-21ZK
This contract is a solicitation for 105 units of a bearing ball set, identified as a commercial off the shelf critical application item with NSN 3110-01-481-9923 and RTX Corporation part number 4950825. The delivery timeline is set for 163 days after the order, with FOB, inspection, and acceptance all occurring at the origin. A primary requirement of this agreement is strict adherence to domestic sourcing restrictions. The bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component costs originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Additionally, the contract mandates specific packaging and preservation standards according to MIL-STD-2073-1E and MIL-DTL-197M, explicitly prohibiting the use of mercury or mercury compounds.
Ball and Roller Bearing Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-21XM
This solicitation is for the procurement of 13 annular ball bearings, part number 2553379, under solicitation number SPE4A6-26-T-21XM. The requirements specify that the bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component costs originating from these regions. Acceptable sources include The Barden Corporation and New Hampshire Ball Bearings Inc. Technical specifications include a raceway surface finish not exceeding 2 micro-inch AA and the use of lube/oil L01 per MIL-PRF-6085D. The contract mandates strict adherence to DLA packaging, marking, and quality requirements, including MIL-STD-129 and MIL-DTL-197M. The items are subject to a 12-month extendable shelf life and require a contractor declaration regarding the domestic or foreign nature of the materials. Delivery is required within five days after order, with inspection and acceptance occurring at the destination. Cybersecurity compliance via CMMC Level 2 self-assessment and adherence to covered defense information regulations are also required.
Ball and Roller Bearing Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-21VJ
This contract is for the procurement of 18 sleeve bushings, identified by NSN 3120-01-354-0277 and part number 4-195-9-00215 from Grove U.S. LLC. The solicitation, numbered SPE4A6-26-T-21VJ, is issued by the Department of Defense ASC Commodities Division. Delivery is required within 165 days after order, with a need ship date of February 14, 2027, and an original required delivery date of July 2, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Ball and Roller Bearing Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details