Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Calibrating Gas Mixture (Isobutylene) Supplier

Active

Federal

Response Deadline10/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the supply of specialized calibrating gas mixtures to support prime contractors on DLA ASC Commodities Division projects. The requirement specifically calls for Isobutylene 100 PPM, Balance Air, delivered in 34-liter high-pressure cylinders at 494 PSIG. Due to the nature of these Critical Application Items, the supplier must maintain strict adherence to purity and concentration standards and comply with all Department of Defense shipping and labeling regulations for pressurized gases. The contract is designated as a Total Small Business Set-Aside under NAICS code 325120 and is managed by the Department of Defense. Performance will take place in Norfolk, Virginia. Interested parties must submit their responses by October 2, 2026, following the posting date of September 24, 2026.

General Info

DOD small business contract for specialized calibrating gas mixtures delivered in Norfolk, Virginia.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

325120 - Industrial Gas Manufacturing

Place of Performance

NORFOLK, VA, 23511-0001, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A6-26-T-36LZ.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CALIBRATING GAS MIXTUR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 24

subcontract

Response DeadlineOct 2

Submission deadline

Response Deadline

10/02/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized calibrating gas mixtures for prime contractors on DLA ASC Commodities Division projects. Provides Isobutylene 100 PPM, Balance Air at 494 PSIG in 34-liter high-pressure cylinders. Ensures strict adherence to purity and concentration standards for Critical Application Items and complies with DoD shipping and labeling requirements for pressurized gases. Delivers 34-liter cylinders containing the specified gas mixture.

Similar Contracts

Same NAICS industry code

6835--VISN 2 Prosthetics Downstate Home Oxygen Services

Solicitation # 36C24226R0081

Solicitation 36C24226R0081 is a request for proposals from the Department of Veterans Affairs for home oxygen services to support beneficiaries within the VISN 2 Downstate New York Healthcare Network. This service-disabled veteran-owned small business set-aside falls under NAICS code 325120 and requires the contractor to provide rental equipment, including concentrators, liquid oxygen systems, and ventilators, across multiple sites in downstate New York. The contract emphasizes strict safety and quality compliance, mandating that providers meet Joint Commission standards or maintain equivalent accreditation from a nationally recognized organization throughout the term of the contract. Additionally, the contractor must adhere to mandatory requirements for the use of thermal fuses in oxygen therapy systems and comply with Department of Labor wage determinations and Immigration and Nationality Act certifications. The evaluation process prioritizes technical capability and past performance over cost, focusing on staffing, management, and the ability to implement a seamless transition plan. Performance is monitored through a Quality Assurance Surveillance Plan that tracks metrics such as timely set-ups, respiratory therapist visit notes, beneficiary education, and customer satisfaction. The pricing structure includes a base period from October 1, 2026, to September 30, 2027, with potential pricing periods extending through mid-2032. Proposals are managed by the Samuel S. Stratton VA Medical Center in Albany, New York, with the primary point of contact being Contract Specialist Corey Swinton.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 20 hours ago

DEADLINE

in about 2 months

IDIQ contract for assorted compressed gases and cylinders

Solicitation # 1232SA26Q0421

Solicitation 1232SA26Q0421 is a combined synopsis and request for quotation for an Indefinite Delivery Indefinite Quantity (IDIQ) contract to provide assorted compressed gases and cylinders for the USDA Agricultural Research Service (ARS) Southern Regional Research Center in New Orleans, Louisiana. This procurement is a total small business set-aside under NAICS code 325120. The contract covers a five-year period of performance from September 30, 2026, to September 29, 2031, consisting of a base year and four option years. The scope includes the delivery and maintenance of various industrial and specialty gases, such as Argon, Helium, Nitrogen, Oxygen, Hydrogen, and Carbon Dioxide, with a required delivery timeline of five working days from the date of order. The contractor is responsible for all maintenance, testing, and cleaning of contractor-owned cylinders, as well as providing specific status tags and pin-indexing where required. Pricing must be submitted via a CLIN-based schedule and include the base cost of the gas, cylinders, and necessary accessories. Award will be based on the best value, evaluated through a comparative methodology considering technical approach, price, relevant experience, and past performance. Invoicing is handled via PDF for orders under 14,999 dollars and through the Invoice Processing Platform for orders exceeding that amount. All deliverables are requested as FOB Destination.

USDA Ars Afm Apd

POSTED

about 20 hours ago

DEADLINE

CALIBRATING GAS MIXTUR

Solicitation # SPE4A6-26-T-36LZ

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # W912NW26QA049

Solicitation W912NW26QA049 is a total small business set-aside for the procurement of dry ice to support the Corpus Christi Army Depot in Texas. The contractor is required to provide dry ice in three forms: 60 lb blocks/cubes, 60 lb slabs, and 33 lb pellet bundles. The primary requirement consists of 340,080 lbs of blocks delivered twice weekly to 12 depot-wide locations, 18,720 lbs of slabs delivered twice weekly to the T700 Engines location, and 3,432 lbs of pellets delivered once weekly to the Rotating Electric location. The base period of performance runs from December 3, 2026, to December 2, 2027, with an option period extending to December 2, 2028. The contract is awarded based on the lowest price among responsible offerors. Key operational requirements include the provision of delivery containers for specific sites, adherence to strict safety standards including OSHA and Army Regulation 385-10, and the submission of a Safety Data Sheet for solid carbon dioxide prior to the first delivery. Because the work is performed on a military installation, contractor personnel must comply with comprehensive security requirements, including criminal history checks, DBIDS registration, and the use of government-issued identification. Invoicing is processed electronically through the Wide Area WorkFlow system. Notably, amendment 0001 removed the CMMC cybersecurity requirements, and amendment 0002 reduced the annual quantity of dry ice blocks from 390,000 lbs to 340,080 lbs.

W6QK Ccad Contr Office

POSTED

DEADLINE

Cylinder & Oxygen Tank Rentals for DVA

Solicitation # 3000026709

The State of Louisiana Office of State Procurement has issued solicitation 3000026709 for a blanket order contract to provide cylinder and oxygen tank rentals and refills for the Department of Veterans Affairs Northeast LA War Veterans Home in Monroe, Louisiana. The scope of work includes the provision of liquid oxygen, GP-55 cylinders, and monthly rentals and refills for E and H cylinders. The contractor is required to perform weekly deliveries on a day agreed upon by the agency and the vendor. The contract will be awarded on an all-or-none basis to the lowest responsive and responsible bidder. The initial period of performance begins on the date of award and ends on June 30, 2027, with the possibility of two additional 12-month renewals, not to exceed a total term of 36 months. Bids are due by October 20, 2026, and must be submitted via the LaGov Vendor portal or in a sealed envelope. All pricing must be quoted as F.O.B. Destination and inclusive of freight charges. Bidders must comply with various state and federal regulations, including Louisiana Secretary of State registration, the Anti-Kickback Act, and the Clean Air Act. Payments will be processed electronically via the LaCarte procurement card or Electronic Funds Transfer.

POSTED

DEADLINE

Specialized Lubricant/Oil SupplierThis subcontract opportunity with the Department of Defense Fluid Handling Division seeks a supplier to provide specialized lubricating oil for prime contractors. The selected provider will be responsible for sourcing, bottling, and delivering the specific grade of oil required for end-items, ensuring all products meet strict government specifications and certifications. The contractor must possess hazardous material handling capabilities and maintain full compliance with FAR 52.223-23 regarding sustainable products. This requirement falls under NAICS code 325120, with a response deadline set for October 5, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

JPMC Medical and Laboratory Gases

Solicitation # 27-416CMS-BOSS4-B-52903

BOSS41610 - Strategic Sourcing

POSTED

DEADLINE

Bulk Liquid Oxygen (LOX) Supply and LogisticsThis subcontract involves the supply and delivery of bulk Liquid Oxygen (LOX) for prime contractors working on USACE Nashville District projects at Wolf Creek Dam. The contractor is responsible for dispatching 23-ton cryogenic tankers across five seasonal phases to maintain four 15,000-gallon storage tanks, utilizing telemetry monitoring equipment to ensure required tank levels are met. All delivered LOX must adhere to CGA G-4.3 specifications with a minimum purity of 99.5 percent, and the provider must supply batch Certificates of Analysis. This operation falls under NAICS code 325120 and is managed by the Department of Defense under the W072 Endist Nashville agency.

W072 Endist Nashville

POSTED

DEADLINE

Propane Delivery and Tank Rental for Howard Hanson Dam and Mud Mountain Dam in Washington State

Solicitation # W912DW26QA073

Solicitation W912DW26QA073 is a total small business set-aside under NAICS 325120 for a non-personal services contract to provide propane delivery and tank leasing for the Howard Hanson Dam in Ravensdale, Washington, and the Mud Mountain Dam in Enumclaw, Washington. The contract structure consists of one base year starting September 28, 2026, with four optional one-year extensions. The scope of work includes automatic and on-call propane deliveries, with specific seasonal schedules requiring bi-weekly deliveries from October through March and monthly or on-call deliveries during the remainder of the year. Additionally, the contractor must lease four tanks at the Mud Mountain Dam, consisting of three 500-gallon tanks and one 250-gallon tank, ensuring compatibility with existing nozzles. Award will be granted to the lowest priced, responsible vendor. Offerors must be registered in the System for Award Management and submit a business license and a complete price schedule by the deadline of October 6, 2026. Performance is subject to the USACE Safety and Health Requirements Manual EM 385-1-1 and requires strict adherence to site access protocols, including the use of CB radios for deliveries to Howard Hanson Dam. Quality assurance is managed through a Quality Assurance Surveillance Plan, which mandates zero missed automatic deliveries and a 95 percent success rate for on-call deliveries within 48 hours. Invoicing is processed electronically via the Wide Area WorkFlow system.

W071 Endist Seattle

POSTED

DEADLINE

Wolf Creek Seasonal Supply of Liquid Oxygen

Solicitation # W912P526QA054

Solicitation W912P526QA054, issued by the USACE Nashville District, seeks a contractor to provide the seasonal supply and delivery of bulk Liquid Oxygen (LOX) to the cryogenic facility at Wolf Creek Dam in Jamestown, Kentucky. The contract period extends through December 31, 2026, with the operational dissolved oxygen season estimated to run through November 30, 2026. The base requirement consists of 2,000 short tons of LOX, with two optional line items for an additional 1,000 short tons each and a third option for warm fill inspection and purging services. The total estimated demand is 4,000 tons, requiring the contractor to scale deliveries across five seasonal phases, including a start-up phase with daily averages between 23 and 46 tons. The LOX must maintain a purity of at least 99.5% and comply with Compressed Gas Association (CGA) G-4.3 specifications. The contractor is solely responsible for all safety, equipment, and structural inspections during transport and delivery to the four 15,000-gallon storage tanks. Award will be granted to the offeror who demonstrates full compliance with technical specifications, acceptable past performance, and the lowest evaluated price, with a 10 percent price preference applied to HUBZone small businesses. Quotes are due by October 7, 2026, and must include a completed price schedule, SAM registration, and evidence of the capacity to handle bulk industrial-gas deliveries.

W072 Endist Nashville

POSTED

DEADLINE

Acetylene Gas SupplierThis subcontract through the Department of Defense ASC Supplier Oper OEM Division involves the supply of 2,000 cubic yards of Acetylene gas, identified by NSN 6830017193841, for prime contractors supporting DLA Aviation supply contracts. The gas must be delivered FOB Destination to Mansfield, Ohio. The supplier is required to adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E, MIL-STD-147 Palletized Load Type IX, and MIL-STD-129. Additionally, the contract mandates compliance with FAR 52.223-3 and requires Safety Data Sheets that meet 29 CFR 1910.1200(g) regulations.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Propane Gas Material SupplyThis subcontract opportunity is for the supply of bulk propane gas to support prime contractors working on US Army installation projects at Fort Leonard Wood and LORA. The provided gas must meet or exceed GPA Standard 2140-97 to ensure compatibility with government-owned tanks, with delivery required to the designated transport vehicle or distribution point. Managed by the Department of Defense under the W6QM Micc-Ft Leonard Wood agency, this project is designated as a total Small Business Set Aside under NAICS code 325120. The place of performance is located in Fort Leonard Wood, Missouri, with a response deadline set for October 30, 2026.

W6QM Micc-Ft Leonard Wood

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Military-Standard Packaging and Palletization ServicesThis subcontract for Military-Standard Packaging and Palletization Services supports prime contractors on ASC Commodities Division projects within the Department of Defense. The service provider is responsible for executing specialized packaging, marking, and palletization to ensure shipments are ready for government acceptance. All work must strictly adhere to MIL-STD-2073-IE for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical requirements include the application of Preservation Method 33 and the use of Unit Container D3 and Intermediate Container E5. The contract falls under NAICS code 561910 and was posted on September 25, 2026, with a response deadline of October 2, 2026.

Packaging and Labeling Services

POSTED

about 15 hours ago

DEADLINE

Supply of Sleeve Bearings (NSN 3120-01-499-7708)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture or sourcing of 42,000 sleeve bearings under NSN 3120-01-499-7708. The contractor is responsible for delivering these units to prime contractors while ensuring strict adherence to supply chain traceability standards per C03 (JUN 2023) and identifying domestic end products in accordance with FAR 25.105. To be eligible, the provider must maintain an active SAM registration and provide Buy American Act certification. The project falls under NAICS code 332999, with a response deadline set for October 2, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305011382082)This subcontract through the Department of Defense ASC Commodities Division involves the supply of 733 socket head cap screws under NSN 5305011382082 for prime contractors on DLA Aviation supply contracts. The contractor must ensure all units meet the required technical specifications, with packaging adhering to ASTM D3951 and marking and labeling following MIL-STD-129. The delivery of the 733 units is set as FOB Origin with the place of performance located in Cherry Point. This opportunity falls under NAICS code 332722 and was posted on September 25, 2026, with a response deadline of October 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

Military Specification Packaging and Palletization ServicesThis subcontract for the Department of Defense ASC Commodities Division involves specialized packaging, marking, and palletization services for prime contractors fulfilling DLA supply contracts. The provider is responsible for delivering 6,000 units prepared for F.O.B. Origin shipment, utilizing industrial palletizing and standardized military labeling systems. All work must strictly adhere to military specifications, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. The process requires the use of military-grade cushioning and moisture barriers to ensure compliance with defense logistics standards.

General Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

Manufacturing and Supply of Special Purpose Electrical Cable AssembliesThis subcontract with the Department of Defense ASC Commodities Division involves the manufacturing and supply of 6,000 Special Purpose Electrical Cable Assemblies, identified by NSN 5995-01-722-4497. The contractor is responsible for fabricating and assembling electrical components according to specific technical drawings, ensuring all units undergo rigorous electrical continuity and signal integrity testing. To ensure quality and compliance, the contractor must maintain comprehensive supply chain traceability documentation and successfully pass source inspections. These assemblies are intended for prime contractors fulfilling DLA supply contracts, with the project falling under NAICS code 335999.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supplier of Spacer, Plate (NSN 5365-011661754)This subcontract involves the supply of precision-manufactured spacer plates identified by NSN 5365-011661754 for the Department of Defense ASC Commodities Division. The selected vendor is responsible for manufacturing or sourcing parts that strictly adhere to Product Verification Testing and Inspection of Supplies Fixed Price standards. This requirement is designated as a Total Small Business Set-Aside, meaning it is reserved specifically for small business entities. To fulfill the contract, providers must maintain EJCP registration, ensure full compliance with Export Control regulations, and utilize the Vendor Shipment Module for logistics. The scope of work requires the physical delivery of the spacer plates to various CONUS stock locations. Interested parties must submit their responses by the specified deadline in October 2026 to be considered for this procurement opportunity.

Precision Turned Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Electrical Contact Brushes (NSN 5977-011530247)This subcontract through the Department of Defense ASC Commodities Division involves the manufacture and supply of electrical contact brushes under NSN 5977-011530247. The contractor is responsible for sourcing or producing these components using carbon and graphite materials and must provide all necessary design, material, and performance data to facilitate inspection and testing. Final products are to be delivered directly to DLA Depots. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335999. Compliance with FAR 52.204-21 regarding the basic safeguarding of information systems is required. Interested parties must submit their responses by the deadline of October 12, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontracting opportunity with the Department of Defense ASC Commodities Division requires specialized services for the preservation, packaging, and marking of bearings to support prime contractors. The scope of work involves executing precise preservation protocols in accordance with MIL-DTL-197M, managing packaging data per MIL-STD-2073-1E, and applying markings according to MIL-STD-129. All tasks must be completed using military-specification materials and industrial marking equipment to ensure all delivered components meet strict military standards. The solicitation is classified under NAICS code 493110 and is managed through the ASC Commodities Division. Interested parties must adhere to a tight response window, as the deadline for submission is September 30, 2026. This contract is essential for maintaining the integrity and traceability of military-grade components throughout the supply chain, ensuring that all items are properly prepared for deployment and storage.

General Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

Bearing Component Manufacturer/SupplierThis subcontract under the Department of Defense ASC Commodities Division requires a manufacturer or supplier to provide specialized precision bearings for prime contractors. The selected provider must ensure all components comply with specific technical solicitation requirements and deliver the physical bearings to designated government shipping points. A critical component of this agreement is the submission of a Contractor's Declaration verifying the domestic or foreign origin of materials to ensure compliance with the Buy American Act and the Trade Agreements Act. The opportunity is categorized under NAICS code 332991, with a response deadline set for September 30, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 15 hours ago

DEADLINE

RF Cable Assembly Supplier (NSN 5995-017196633)This subcontract opportunity with the Department of Defense ASC Commodities Division seeks a supplier to provide Radio Frequency cable assemblies meeting NSN 5995-017196633 specifications. The contractor is responsible for manufacturing or sourcing assemblies that utilize the required cabling, connectors, and shielding while ensuring full compliance with FAR 52.211-5 Material Requirements. Deliverables must consist of OEM or approved equivalent parts, with order quantities ranging from 12 to 25 units. The contract is designated as a Total Small Business Set-Aside under NAICS code 335931. Interested parties must submit their responses by the deadline of October 12, 2026. This requirement supports prime contractors operating under ASC Commodities Division supply contracts to ensure the delivery of critical RF hardware.

Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly SupplyThis subcontract through the ASC Commodities Division of the Department of Defense involves the sourcing and manufacture of a Special Purpose Electrical Cable Assembly. The specific requirement is for the assembly identified by NSN 5995-01-625-8908 and Part Number EB4749-8-100A, intended for use by prime contractors on procurement projects. The contractor is responsible for ensuring all packaging and marking strictly adhere to MIL-STD-129 standards. Delivery of the physical cable assembly is required FOB Origin, with the place of performance located in Tracy, California. The solicitation was posted on September 25, 2026, with a response deadline of September 30, 2026, under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 15 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services, issued by the Department of Defense ASC Commodities Division, requires the performance of military packaging, marking, and palletization for prime contractors on DLA supply contracts. The service provider must ensure all shipments are marked according to MIL-STD-129, palletized per RP001, and packaged using MIL-STD-2073-1E standards, including the use of specified preservatives and cushioning. Additionally, the contractor is responsible for applying hazard labels in compliance with 29 CFR 1910.1200 and DFARS 252.223-7001 to prepare hardware for delivery to the DLA Distribution DDSP New Cumberland Facility. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488510. The response deadline is October 2, 2026, with the place of performance located in New Cumberland, Pennsylvania. This contract focuses on the technical execution of military shipping standards to ensure hardware is ready for official distribution.

Freight Transportation Arrangement

POSTED

about 15 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS