This Pre-Solicitation opportunity from National Aeronautics And Space Administration was posted on August 11, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Calibration and Metrology Services (CAMS) IV

Closed

80JSC021R0051Federal

Submission Closed01/15/2021, 10:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

SLED

Force Plate SKID Truck Calibration for the MNT team

Solicitation # 601440000054633

The Texas Department of Transportation has issued solicitation number 601440000054633 for Force Plate SKID Truck Calibration for the MNT team. This procurement focuses on pavement testing and data collection equipment, specifically pavement sensors used for reading road conditions. The performance of these services will take place within the state of Texas. Interested vendors must register and submit their responses through the Euna Procurement portal. The deadline for submittals is November 4, 2026, at 9:00 PM, and no responses will be accepted after this time. The primary point of contact for this solicitation is Karina Flores, who can be reached via email at Karina.Flores@txdot.gov or by phone at 512-460-8826.

Texas Department of Transportation

POSTED

DEADLINE

Trace Organic Analysis Laboratory ServicesThis subcontract for Trace Organic Analysis Laboratory Services supports prime contractors on wastewater projects for the City of Atlanta Department of Watershed Management. The selected provider will perform laboratory testing of wastewater samples to verify compliance with industrial pretreatment program requirements and NPDES permits, adhering strictly to Georgia EPD and EPA standards. The contractor must hold NELAP or a state-equivalent certification to deliver certified data and laboratory analysis reports. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

POSTED

DEADLINE

MS-IFB/DWM/2609-1270093/Trace Organic Laboratory Services

Solicitation # PE-66062-NONST-2027-000000508

The City of Atlanta Department of Watershed Management is seeking specialized trace organic laboratory testing services under solicitation number PE-66062-NONST-2027-000000508. These services are required to support compliance with National Pollutant Discharge Elimination System permits and industrial pretreatment program requirements that exceed the internal capabilities of the City Wastewater Services Laboratory. The procurement is essential for maintaining regulatory compliance with EPA and Georgia EPD standards for wastewater treatment plants and CSO control facilities within the state of Georgia. Interested suppliers must be registered on the Atlanta suppliers portal to view or download the solicitation documents. The solicitation was posted on October 21, 2026, with a response deadline of October 30, 2026, at 7:00 PM. Primary inquiries and coordination for this effort are managed by Lyndon McCluskey.

POSTED

DEADLINE

Material Testing and Special InspectionsThis subcontract for East Texas A&M University involves providing third-party testing of construction materials and specialized inspections for prime contractors on university facility projects. The scope of work includes conducting soil compaction, concrete slump and strength, and weld testing, as well as performing special inspections to ensure compliance with applicable building codes. The selected provider must utilize an accredited testing laboratory and non-destructive testing tools to deliver certified material test reports and detailed inspection logs. Qualified contractors are required to hold ICC certifications to perform these specialized services. This opportunity is categorized under NAICS code 541380 and was posted on October 21, 2026, with a response deadline of November 6, 2026.

East Texas A&M University

POSTED

DEADLINE

Third-Party Materials Testing and InspectionThis subcontract for Third-Party Materials Testing and Inspection, issued by the Fulton County Purchasing Department in Georgia, involves providing independent testing and inspection of coatings for prime contractors on water storage projects. The scope of work includes inspecting surface profiles after blasting, measuring dry film thickness, conducting adhesion testing, and performing quality assurance inspections using holiday detectors and DFT gauges. Qualified providers must employ NACE/AMPP certified coating inspectors to ensure all standards are met and deliver detailed inspection reports and certifications of compliance. The solicitation was posted on October 21, 2026, with a response deadline of November 18, 2026, falling under NAICS code 541380.

Fulton County Purchasing Department

POSTED

DEADLINE

Environmental Laboratory Analysis and Technical ServicesThe Environmental Laboratory Analysis and Technical Services subcontract supports prime contractors on projects for the Rhode Island Department of Environmental Management. The scope of work involves performing chemical analysis of unknown materials and providing environmental consulting, specifically focusing on organic and inorganic analysis, EPA Method 1311 Zero Headspace Extraction, and comprehensive geological and hydrological assessments. The primary deliverables for this engagement are detailed analytical reports and compliance summaries. To qualify for this contract, service providers must maintain laboratory accreditation for the required EPA methods. Additionally, the contract mandates that personnel performing specialized tasks hold professional licenses in geology, biology, or toxicology. This effort falls under NAICS code 541380 and is managed through the State of Rhode Island.

State of Rhode Island

POSTED

DEADLINE

Water Quality Testing and AnalysisThis subcontract for Water Quality Testing and Analysis involves providing specialized water sampling and laboratory services for prime contractors working on Alabama state facility projects at Old Cahawba. The selected provider will be responsible for collecting water samples and analyzing them for biological agents or contaminants in strict accordance with state standards. To qualify, the contractor must utilize a certified laboratory with NELAP or a state-equivalent accreditation and employ certified equipment to ensure accuracy. The final deliverable for this engagement is the provision of certified water analysis reports. This opportunity is categorized under NAICS code 541380 and is associated with the Cahawba/JT Morgan house.

Cahawba/JT Morgan house

POSTED

DEADLINE

0045 Water Testing - Old Cahawba

Solicitation # SRC0000037270

Solicitation SRC0000037270 is for monthly water testing services at Old Cahawba Park in Orrville, Alabama, to ensure compliance with ADEM requirements. The service period is scheduled from October 2026 through September 2027. The contract is managed by the Cahawba/JT Morgan house under the agency of Alabama and is subject to a total cost ceiling of 25,000 dollars. This agreement may be renewed annually for up to five years, provided the total cost does not exceed the 25,000 dollar limit. Subcontracted bids are not permitted, and vendors must provide professional licensing and insurance certificates upon request. The contract is governed by the Department of Finance Administrative Code and the Code of Alabama, with the City of Montgomery serving as the sole venue for litigation. Vendors must be registered in Alabama Buys and certify compliance with state tax laws, non-collusion agreements, and open trade policies. Price escalations are limited to 5 percent of the annual contract cost. Payment will be handled electronically via state-issued credit cards, P-cards, or EFT. The State of Alabama reserves the right to evaluate bids based on cost realism and price reasonableness, and the contract may be cancelled if funds are not appropriated for subsequent fiscal periods.

Cahawba/JT Morgan house

POSTED

DEADLINE

Construction Inspection and Quality AssuranceThis subcontract for Construction Inspection and Quality Assurance involves performing on-site inspections of construction activities for prime contractors on City of Okeechobee projects. The primary objective is to ensure all work complies with engineering plans and specifications. Responsibilities include attending Technical Review Committee meetings and utilizing specialized field testing equipment and inspection software to monitor progress. Qualified candidates must be certified inspectors, with credentials such as ACI or NICET. Key deliverables for the contract include the submission of daily inspection reports, non-compliance reports, and final inspection sign-offs. The solicitation was posted on October 21, 2026, with a response deadline of November 6, 2026.

POSTED

DEADLINE

Material Testing and Special Inspection ServicesThe Pioneer Valley Transit Authority is seeking a subcontractor to provide Material Testing and Special Inspection Services for its bus and paratransit facility projects in Springfield, Massachusetts. The selected provider will be responsible for performing technical testing and owner-required special inspections for concrete, asphalt, and steel materials. To ensure compliance and quality, the contractor must operate an accredited testing laboratory and employ licensed professional inspectors. The primary deliverables for this engagement include the submission of certified material test reports and official inspection certificates. Interested parties must submit their responses by November 18, 2026, in accordance with the solicitation guidelines for NAICS code 541380.

PTA01 - Pioneer Valley Transit Authority

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Hydrostatic CertificationThis subcontract, issued by the Department of Defense under the Navsup Weapon Systems Support Mech, involves providing specialized non-destructive testing and hydrostatic certification for critical safety items on Naval Sea Systems Command projects. The scope of work includes performing hydrostatic testing at 150 percent pressure, dye penetrant inspections, and quantitative chemical and mechanical analysis of titanium alloys to ensure structural integrity and safety compliance. Qualified contractors must hold a Confidential security clearance and possess ASNT Level II or III certifications to perform these technical evaluations. The primary deliverables for this engagement are certified test reports and detailed analysis data. Interested parties should note the response deadline of November 20, 2026, for this opportunity categorized under NAICS code 541380.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Flight-Critical Module Testing and CertificationThe Flight-Critical Module Testing and Certification subcontract involves performing final testing and inspection of repaired NRP/NSPR Module Assemblies for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider must execute testing procedures according to approved repair and overhaul manuals, utilizing calibrated measuring and test equipment that complies with NCSL Z540.3 or ISO 10012 standards. The primary deliverables for this engagement include detailed test reports and the certification of Ready For Issue status for every unit processed. This Department of Defense requirement falls under NAICS code 541380, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

about 18 hours ago

DEADLINE

in 30 days

General Info

Agency

National Aeronautics And Space Administration → NASA Johnson Space Center

Contract Value

$15,227,286.5

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Houston, TX, 77058, USA

Set-Aside

SBA

Awardee

ROHMANN SERVICES, INC.

Award Issued Date

09/01/2021, 12:00:00 AM UTC

Documents

80JSC021R0051+-+Amendment+1+SF30.pdf

80JSC021R0051+-+Amendment+2+SF30.pdf

80JSC021R0051+-+Amendment+3+SF30.pdf

80JSC021R0051+-+Amendment+4.pdf

80JSC021R0051.pdf

80JSC021R0051+T+and+Cs+-+Amendment+4.docx

Attachment+J-1.pdf

Attachment+J-3.xls

Attachment+J-5.pdf

Attachment+J-6.xlsx

Attachment+L-3.xlsx

Attachment_L3.xlsx

Attachment+L-5.xlsx

CAMS+IV+Draft+RFP+Changes+to+Final+RFP.pdf

CAMS+IV+Draft+RFP+QAs.pdf

CAMS+IV+Final+RFP+Amendment+2+QAs.pdf

CAMS+IV+Final+RFP+Amendment+3+QAs.pdf

CAMS+IV+Final+RFP+Cover+Letter.pdf

CAMS+IV+final+SSS.pdf

CAMS+IV+Preproposal+Bulletin.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

6 updates

PhaseClosed

PostedNov 24

Presolicitation

Notice updatedDec 14

Response deadline changed from Dec 2, 2020 to Jan 15, 2021. The notice description changed.

Notice updatedDec 14