This Solicitation opportunity from Department Of Defense was posted on October 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
Solicitation W81K0027QA015 is a firm-fixed-price requirement issued by the Medical Readiness Contract Office West for the Food Analysis and Diagnostic Laboratory (FADL) at Fort Sam Houston, Texas. The scope of work involves providing ISO 17025:2017 accredited onsite and offsite calibration, temperature mapping, and repair services. Key equipment requirements include the calibration and temperature mapping of up to five autoclaves, annual calibration for up to 26 analytical balances, onsite calibration for up to nine reference thermometers, offsite calibration for up to six reference weight sets, and calibration for a high volume of pipettes, including up to 560 channels for FY27. All services must meet American Association for Laboratory Accreditation (A2LA) standards, with final reports detailing pass/fail status, measurement uncertainties, and traceability delivered within five calendar days of service.
The period of performance is scheduled from December 1, 2026, to November 30, 2027, with an estimated government value of 26,000 dollars. This is an unrestricted acquisition, though a price evaluation preference is granted to HUBZone small business concerns. Proposals are evaluated based on price and technical compliance, with a technical quotation limit of 10 pages. Following multiple amendments, the final response deadline was set for October 28, 2026. Award eligibility requires active registration in the System for Award Management (SAM), and payment will be processed electronically via the Wide Area WorkFlow (WAWF) system.
General Info
ISO 17025 calibration and repair services for FADL, Fort Sam Houston, valued at $26,000.
HighAI Summary for Calibration and Temperature Mapping of Autoclaves and On-Site Calibration of Pipettes, Weights, and Balances: This is a solicitation (Standard Form 1449) for the calibration and temperature mapping of autoclaves and on-site calibration of pipettes, weights, and balances for the Food Analysis and Diagnostic Laboratory (FADL) at Fort Sam Houston, TX. The requirement includes ISO 17025:2017 accredited services for various equipment, including autoclaves, analytical balances, and a high volume of pipettes (up to 560 channels for FY27). The document includes a detailed Statement of Work and a CLIN-based pricing schedule for firm-fixed-price services.
XLSX
XLSX, High priority: read this firstspecifications
HighAI Summary for FY27 Equipment List: An inventory list of laboratory equipment for FY27, specifically detailing pipettes and scales. The document includes serial numbers, volumes, manufacturers, and assigned sections (Molecular, Immuno-Diag, Microbiology, and Chemistry) with corresponding points of contact.
PDF
PDF, High priority: read this firstq-and-a
HighAI Summary for Q&A for Solicitation W81K00-27-Q-A015: Question and Answer document for solicitation W81K00-27-Q-A015 regarding calibration services for autoclaves, thermometers, balances, and pipettes. It clarifies ISO 17025:2017 accreditation requirements, confirms the acquisition is unrestricted, and provides technical details on autoclave temperature mapping and equipment specifications.
PDF
PDF, High priority: read this firstamendment
HighAI Summary for Solicitation Amendment 0004 - W81K0027QA015: Amendment 0004 to solicitation W81K0027QA015, issued on October 21, 2026, by the Medical Readiness Contract Office West. The primary purpose of this amendment is to post answers to questions submitted by September 26th and to extend the response due date from October 21, 2026, to October 28, 2026.
PDF
PDF, High priority: read this first51 pages · rfq
HighAI Summary for Solicitation W81K0027QA015: Standard Form 1449 solicitation for commercial products and services, issue date 01 OCT 2026, solicitation number W81K0027QA015. The procurement is for calibration and temperature mapping of autoclaves and on-site calibration of pipettes, weights, and balances. It includes Section B pricing/CLIN structure, firm-fixed-price line items, NAICS 541380, and Section C statement of work with ISO 17025:2017 accreditation requirements and calibration/reporting specifications.
PDF
PDF, High priority: read this first6 pages · amendment
HighAI Summary for Solicitation W81K0027QA015 Amendment 0002: Amendment 0002 to solicitation W81K0027QA015, issued on October 8, 2026, by the Medical Readiness Contract Office West. The primary purpose of this amendment is to extend the proposal response due date from October 16, 2026, to October 21, 2026. It also provides updated instructions for electronic submission, question deadlines, and technical capability and pricing requirements.
PDF
PDF, High priority: read this firstamendment
HighAI Summary for Solicitation W81K0027QA015 Amendment 0003: Amendment 0003 to solicitation W81K0027QA015, issued on 15 October 2026 by the Medical Readiness Contract Office West. The primary purpose of this amendment is to extend the deadline for answering questions to 21 October 2026 and extend the proposal due date to 28 October 2026. It also provides detailed instructions for electronic submission, technical capability requirements (Factor 1), and pricing requirements (Factor 2).
PDF
PDF, High priority: read this firstsow
HighAI Summary for Statement of Work - ISO 17025 Calibration Services: This Statement of Work outlines requirements for ISO 17025:2017 accredited calibration, temperature mapping, and repair services for the Food Analysis and Diagnostic Laboratory (FADL) at Fort Sam Houston, TX. The scope includes onsite and offsite calibration of pipettes (up to 560 channels for FY27), reference thermometers, analytical balances, and autoclaves, with specific requirements for reporting and scheduling.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC 244386 Center Data Log: Technical data log dated 2/24/26 for Steris Model 20VS (SN: 033222531) at San Antonio MMC. The document records time-stamped temperature (°C) and pressure (bar) readings for a specific center identified as ID 244386.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC 244387 Data Log - 2-24-26: Technical data log dated February 24, 2026, for San Antonio MMC (ID: 244387) involving a Steris Model 20VS. The document contains time-stamped temperature and pressure readings for two channels.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC Data Log - 2/24/26: Technical data log from February 24, 2026, for San Antonio MMC (ID: 121875) involving a Steris Model ANSC Lab 250. The document records time-stamped temperature (°C) and pressure (bar) readings.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC Temperature Data - 2/24/26: Technical data log from Aldinger Co for San Antonio MMC (ID: 244387) dated February 24, 2026. The document contains time-stamped temperature readings in Celsius for a Steris Model 20VS unit (SN: 033222532) located at Sam FT Houston BLDG 2630.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC Temperature Data - 2/24/26: Technical data log from Aldinger Co for San Antonio MMC (ID: 121875) dated February 24, 2026. The document contains time-stamped temperature readings in Celsius for a Steris Model ANSC Lab 250 unit.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC Temperature Data - 2/24/26: Technical data log from Aldinger Co for San Antonio MMC (ID: 121875) dated February 24, 2026. The document contains time-stamped temperature readings in Celsius for a Steris Model ANSC Lab 250 unit.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC Temperature Data - 2/24/26: Technical data log from Aldinger Co for San Antonio MMC (ID: 121875) dated February 24, 2026. The document contains time-stamped temperature readings in Celsius for a Steris Model ANSC Lab 250 unit.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC Temperature Data - 2/24/26: Temperature data log from February 24, 2026, for San Antonio MMC (ID: 244387) using a Steris Model 20VS device. The document contains time-stamped temperature readings in Celsius for Channel 1.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC Temperature Data - ID 121875: Technical data log from February 24, 2026, recording temperature readings in Celsius for equipment (Model: ANSC Lab 250, SN: 0324613-15) at San Antonio MMC, provided by Aldinger Co.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC Temperature Data - ID 244386: Technical data log from Aldinger Co for San Antonio MMC (ID: 244386, SN: 033222531, Model: 20VS) dated 2/24/26. The document contains a time-series record of temperature readings in Celsius for 'Channel 1' at the Front Left position.
XLSX
XLSX, Low priorityother
LowAI Summary for San Antonio MMC Temperature Data - ID 244386: Technical data log from Aldinger Co for San Antonio MMC (ID: 244386) dated 2/24/26. The document contains a time-series record of temperature readings in Celsius for a Steris Model 20VS device.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC Temperature Data - ID 244386: Technical data log from February 24, 2026, recording temperature readings in Celsius for equipment (Model: 20VS, SN: 033222531) at San Antonio MMC, provided by Aldinger Co.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC Temperature Data - ID 244387: Technical data log from February 24, 2026, recording temperature readings in Celsius for equipment (Model: 20VS, SN: 033222532) at San Antonio MMC, provided by Aldinger Co.
XLSX
XLSX, Low priorityspecifications
LowAI Summary for San Antonio MMC Temperature Data - ID 244387: Temperature log data from February 24, 2026, for San Antonio MMC (ID: 244387), involving equipment Model 20VS (SN: 033222532) by Steris, as recorded by Aldinger Co.
XLSX
XLSX, Low priorityother
LowAI Summary for San Antonio MMC Temperature Data Log - 2/24/26: A data log from Aldinger Co for San Antonio MMC (ID: 244386) dated February 24, 2026. The document contains time-stamped temperature readings in Celsius for a Steris Model 20VS unit (SN: 033222531) located at Sam FT Houston BLDG 2630.
Get AI-powered intelligence on the opportunities still open
Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.