Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Cancelled: FULL AND OPEN COMPETITION for 10 Kilowatt Laser Welding Work Station

Active
NB194000-14-01577Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to a full and open competition solicitation for a 10 Kilowatt Laser Welding Work Station issued by the Department of Commerce, specifically the National Institute of Standards and Technology (NIST). The solicitation number is NB194000-14-01577, and the work is to be performed in Boulder, Colorado. The solicitation underwent two amendments: Amendment 1 extended the proposal due date to Sunday, May 4, 2014, at 11:59 pm MST and clarified that the competition is open, with no set-aside restrictions. Amendment 2 reiterated that the set-aside noted in the original solicitation sidebar is not applicable and corrected the due date as stated in Amendment 1, reinforcing electronic submission of proposals to the designated contact, Patricia Bullington. Proposals had to be submitted electronically by the specified deadline to be considered, and late submissions were not accepted. The points of contact for this solicitation were Patricia Bullington and Robert Brackett, both contract specialists at NIST, available via email and phone for inquiries. This contract opportunity was eventually cancelled, but the solicitation initially sought vendors capable of meeting the Statement of Work specifications related to a laser welding workstation under NAICS code 334516. The solicitation aimed to ensure transparency and full competition among all interested parties without preference or reservation for specific groups.

General Info

NIST solicited proposals for a 10kW laser welding workstation; competition open, later cancelled.

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Department of Commerce National Institute of Standards and Technology 325 Broadway, BOULDER, CO, 80305, USA

Set-Aside

NONE

Documents

2

Solicitation NB686010-14-01577: 10kW Laser Workstation

DOCX, High priority: read this first9 pages · rfp
High

SOW for 10 Kilowatt Laser Welding Station (NB686010-14-01577)

DOCX, High priority: read this first4 pages · sow
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

3 updates
PhaseCombined Synopsis
Posted

Combined Synopsis

Notice updated

The notice description changed.

Notice updated

The notice title changed. The notice description changed.

Notice updated

The response deadline was removed. The notice title changed. Set-aside removed.

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Commerce Nist
Contacts2 people available
OfficeGAITHERSBURG, MD, 20899, USA
Organization / AgencyDepartment Of Commerce Nist
Office AddressGAITHERSBURG, MD, 20899, USA
Contacts
Patricia M. BullingtonContract Specialist
Robert BrackettContract Specialist

Full Description

Show more
AMENDMENT 2: THE PURPOSE OF AMENDMENT 2 IS TO: 1. Clarify that the set-aside listed in the side-bar of this solicitation is not updatable. THIS SOLICITATION IS FULL AND OPEN TO ALL INTERESTED PARTIES regarding the SOW Specifications in this solicitation. 2. Correct proposal due date on Amendment 1 to: THE DUE DATE FOR ALL PROPOSALS IS Sunday, May 04, 2014, 11:59pm (MST) and MUST BE SUBMITTED ELECTRONICALLY TO patricia.bullington@nist.gov. AMENDMENT 1: THE PURPOSE OF AMENDMENT 1 IS TO: 1. EXTEND THE DUE DATE FOR PROPOSALS TO Sunday, May 4, 2014, 11:59pm MST (otherwise midnight MST). Proposals received after this date will not be considered for award. All proposals must be submitted electronically to patricia.bullington@nist.gov by the due date. 2. OPEN COMPETITION. THIS SOLICITATIONS IS HEREBY FULL AND OPEN COMPETITION, NO SET ASIDE. For questions, please contact Patricia Bullington 303-497-3106.

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
Federal
Low-Range Force Frame Kit
Solicitation # N6426726R1010
Solicitation N6426726R1010 is a request for proposals for a five-year Indefinite Delivery/Indefinite Quantity (IDIQ) contract to procure Low-Range Force Frame Kits (FFK) for the Naval Surface Warfare Center, Corona Division. The government intends to purchase a minimum of two and a maximum of 45 kits to support Navy fleet Calibration Laboratories. These kits must provide a stable platform for mounting and aligning force gages and dynamometers, adhering to Calibration Standards Specification (CSS) 06-3228 and MIL-PRF-28800G Class 4 environmental standards. Key deliverables include the hardware, a transit case with specific gasket and fastening requirements, COTS operator and service manuals (CDRL T001), and a repairable parts list (CDRL A001). All equipment must feature permanent identification plates and two-dimensional Unique Identification (IUID) data matrices conforming to MIL-STD-130N. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) basis, evaluating proposals on total price and a technical rating of acceptable or unacceptable. Technical evaluation includes a review of the offeror's past performance using up to three references from the last three years. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) portal by October 21, 2026. Required submission documents include a completed Cross Reference Matrix in Microsoft Excel, pricing for all CLINs, and a Small Business Subcontracting Plan for offerors other than small business concerns. Delivery is required within 120 calendar days from the issuance of a delivery order, with shipments sent FOB Contractor Destination.
Naval Surface Warfare Center

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334516
New
Federal
Off-Axis Parabolic Mirrors
Solicitation # FA860127Q0003
The Air Force Life Cycle Management Center, on behalf of the Air Force Institute of Technology, is conducting market research via a Sources Sought notice to identify qualified sources for the manufacture and delivery of 66 customized off-axis parabolic mirrors and associated protected-gold coating services. These precision optical components are intended for use in the Extreme Light Laboratory to support ultra-intense laser experiments. The mirrors must feature a 30mm diameter fused-silica substrate with a parabolic focus at 45 degrees, a surface roughness of less than 1nm RMS, and a scratch/dig specification of 20-10. The required protected-gold coating must provide an average reflectivity of at least 97 percent at a wavelength of 780 plus or minus 40nm with a 45-degree angle of incidence. The selected contractor will be responsible for all labor, materials, quality assurance, and transportation to Wright-Patterson Air Force Base, Ohio. Key deliverables include the mirrors and comprehensive test data, including certificates of conformance and surface-measurement data. Delivery is required within 98 calendar days after receipt of order, and the equipment must be warranted against defects for two years following receipt. Payment terms are set at 100 percent after delivery, net 30 days from the invoice date. Interested parties under NAICS code 334516 must submit a capability package by October 23, 2026.
FA8601 Aflcmc Pzio

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334516
New
Federal
Flight Model Solar Array Wings
Solicitation # 80NSSC27946791Q
NASA/NSSC is seeking capability statements for the procurement of flight-qualified solar array wings for the TERP RAPTOR 12U CubeSat mission to asteroid Apophis. The requirement includes the acquisition and delivery of one flight model consisting of two solar array wings, each featuring 20 solar cells, hinges, spacers, and a thermal knife deployment system. The scope of work encompasses a comprehensive test campaign involving vibrations, TVAC, and bake-out tests, as well as the delivery of interface documentation, software, and calibration data. The contractor must also provide technical support during solar panel acceptance, spacecraft integration, and initial functional verification at the NASA Goddard Space Flight Center in Greenbelt, Maryland. This procurement is being conducted under FAR Part 12 for commercial items, with a planned period of performance for unit testing and integration from July 1, 2027, through October 31, 2027. While NASA/NSSC intends to issue a sole source contract to DHV Technology under FAR 12.102(a), they are currently requesting capability statements to determine if the procurement should be conducted on a competitive basis. Interested parties must submit their qualifications in writing to the designated point of contact by October 28, 2026. Please note that quotes will not be evaluated at this stage, and all correspondence must reference the notice ID 80NSSC27946791Q.
National Aeronautics And Space Administration

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334516
New
Federal
ICP-OES for Oil Analysis
Solicitation # W911S227U0057
Solicitation W911S227U0057 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of new equipment for the material analysis lab at Yuma Test Center. The requirement consists of one Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) and one compatible Autosampler. The ICP-OES must feature a radial torch with radial view, oxygen burn capability, chiller-free operation, and the ability to export data via .csv for LIMS database entry. The Autosampler must include mixing and sample induction heads, a capacity for up to 384 samples across four 96-position racks, and dimensions not exceeding 20 by 24 by 24 inches. Both pieces of equipment must be designed to meet ASTM D-5185 and Caterpillar SOS program performance standards. This procurement is a Total Small Business Set-Aside under NAICS code 334516. The solicitation is brand name or equal, specifically referencing Perkin Elmer for the ICP-OES and Teledyne Cetac for the Autosampler; any equal products must meet all salient physical and functional characteristics and be supported by descriptive literature. Award will be granted to the responsible offeror deemed most advantageous based on price and technical merit. Quotes must be submitted via the PIEE Solicitation module, with a preferred delivery time of 30 days on an F.O.B. destination basis. Only new equipment will be accepted, and offerors must provide certifications regarding the country of origin as part of the Buy American and Balance of Payments Program requirements.
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 24 days
View Details

More opportunities from Department Of Commerce Nist

Same awarding agency

NAICS: 236210
New
Federal
Building 215 Clean Room HEPA Filter Replacement
Solicitation # RFI-195000-26-00181
The National Institute of Standards and Technology is conducting market research through a Request for Information for the Building 215 Advanced Measurement Laboratory cleanroom repair and HEPA filter replacement project in Gaithersburg, Maryland. This initiative follows a previous solicitation that failed to produce an acceptable offer, prompting NIST to reassess its acquisition strategy and seek industry feedback on constructability, cost, and schedule feasibility. The project scope involves the modernization of an 1,800 square meter facility, including the replacement of approximately 1,200 HEPA filters, 70 VAV terminal units, and 54 airflow monitoring devices, as well as the installation of 32 exhaust air control valves and associated ductwork repairs, testing, and recertification. A critical component of the project is the proposed phasing plan, which aims to minimize research disruptions by utilizing 19 construction phases, including 18 critical cleanroom outage phases. Each critical outage is currently envisioned as a nine-day window starting Friday evening and requiring 24/7 operations to achieve ready-for-re-occupancy by the following Monday morning. NIST is specifically requesting rough-order-of-magnitude cost estimates and industry input on whether this aggressive outage schedule is realistic or if it creates prohibitive risks and costs. Responses, including company experience and recommendations for improving competition and project execution, are due by October 14, 2026.
Industrial Building Construction

POSTED

2 days ago

DEADLINE

in 12 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS