Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CAPACITOR, FIXED, CER

Active
SPE7M5-26-T-400XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation is for a fixed ceramic capacitor identified by NSN 5910-01-728-7829, with a quantity of six units required under Purchase Request 7014418802. The item is restricted source, meaning only the manufacturers cited in the solicitation are prequalified to supply it, and submissions based on alternative manufacturers must include detailed technical data for evaluation per DLAI 3200.1. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from non-accepted supplies. Configuration changes require formal engineering change proposals and variance requests. The contract is subject to Covered Defense Information provisions. Delivery is due 101 days after order placement to New Cumberland, PA, 17070-5002. The solicitation, issued under SPE7M5-26-T-400X, was posted on August 10, 2026, with responses due by August 21, 2026. Primary point of contact is Samuel Cooper of the Department of Defense’s Active Devices Division.

General Info

Six ceramic capacitors, NSN 5910-01-728-7829, restricted source, due in 101 days to New Cumberland, PA.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7M5-26-T-400X Request for Quotations Dated 2026-08-11

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA
Contacts
SAMUEL COOPER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CAPACITOR,FIXED,CER
CAPACITOR,FIXED,CERAMIC DIELECTRIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
NOTE: THIS IS A RESTRICTED SOURCE ITEM
MANUFACTURED TO THE OEM DRAWING(S) CITED
HEREIN AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED BELOW HAS/HAVE BEEN
PREQUALIFIED TO MANUFACTURE THE ITEM.
OFFERS BASED ON SUPPLYING OTHER MANUFACTURER'S
PARTS SHALL BE ACCOMPANIED BY TECHNICAL AND
OTHER DATA SUFFICIENT TO EVALUATE THE ITEM FOR
THE INTENDED APPLICATION AS PER DLAI 3200.1,
ENCL 6. SAID NSN/Part Number: 5910-01-728-7829 Quantity: 6 EA Purchase Request: 7014418802QTY: 6 Delivery: 101 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334416
New
Federal
MILES CITY CONVERTER THYRISTOR ASSEMBLIESThe Western Area Power Administration, under the U.S. Department of Energy, has forecasted a procurement for MILES CITY CONVERTER THYRISTOR ASSEMBLIES, targeting suppliers capable of providing specialized power electronics components used in high-voltage conversion systems. This forecast, posted on August 10, 2026, falls under NAICS code 334416, which classifies the manufacturing of electronic components and accessories, indicating the procurement is for custom-engineered thyristor assemblies critical to converter station operations. No solicitation number has been assigned yet, and the contract type remains unspecified as this is a pre-solicitation forecast, meaning formal bidding has not commenced and details such as contract value, timeline, or delivery schedules are not yet public. The place of performance and delivery location have not been defined, though the context suggests the components are intended for use in Western Area Power Administration’s transmission infrastructure. The procurement is being managed by the agency’s Small Business Program Managers, with contacts listed at tetrault@wapa.gov and setzel@wapa.gov, signaling a focus on engaging small businesses in the supply chain. No set-aside classification or description has been provided, leaving open the possibility of either open competition or a targeted small business preference. While the forecast serves as an early indicator of upcoming procurement activity, potential vendors should monitor official channels for the formal solicitation, which will include detailed technical specifications, submission deadlines, evaluation criteria, and contractual requirements. No office address or zip code has been included for the contracting office, emphasizing that this is a high-level forecast rather than a binding opportunity.
Western Area Power Administration

POSTED

about 18 hours ago

DEADLINE

N/A
View Details
NAICS: 334416
New
DIBBS
Supply of Electrical Connector (MIL-SPEC Compliant)The contract solicits the supply and delivery of five military-specification electrical connectors identified by NSN 5935-01-261-5598, requiring full compliance with defense standards for packaging, labeling, and material restrictions to ensure suitability for federal military applications. All units must meet stringent technical and regulatory criteria to align with Department of Defense requirements, emphasizing reliability and interoperability in operational environments. The contract is classified as a subcontract under NAICS code 334416, issued by the Active Devices Division of the Department of Defense, with a response deadline of August 25, 2026, and a posted date of August 10, 2026. Performance is required at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The offering is open through the DIBBS platform, and while no set-aside designation or point of contact is specified, bidders must ensure adherence to all military-grade specifications and deliverables outlined in the solicitation.
ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334416
New
DIBBS
BATTERY POWER SUPPLY
Solicitation # SPE7L7-26-T-4680
The contract requires the supply of a sealed lead acid battery power supply classified as a TYPE I (CODE H) item with a non-extendable shelf life of 12 months, compliant with commercial off-the-shelf standards and verifiable catalog data. Delivery is for a single unit under NSN 6130-01-418-5230, with a requirement to ship within 20 days from contract award, FOB origin, and deliver to the specified location in Latham, NY. Inspection and acceptance occur at the destination under FAR 52.246-2, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances for acceptance unless otherwise stated. Attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively, and unspecified attributes are treated as major. Packaging must adhere strictly to MIL-STD-2073-1E with defined material codes and palletization per DLA’s RP001, while labeling follows MIL-STD-129 including the special marking code 32 for Type I shelf life. Hazardous materials are restricted under the Hazard Communication Standard, with mercury or mercury-containing compounds prohibited unless functionally essential in batteries or other specified equipment, in which case portable devices must be shockproof and contain a second boundary of containment per NAVSEA 5100-003D. The contract mandates electronic invoicing via WAWF and compliance with a comprehensive set of DFARS and FAR clauses covering safeguarding defense information, cyber incident reporting, prohibiting acquisition of covered telecommunications equipment, whistleblower rights, trafficking in persons, employment eligibility verification, and sustainable product requirements. Payment is based on historical pricing of $4,500 per unit, though the current line item price is unlisted. The solicitation is automated, closed via DIBBS by August 21, 2026, and governed by DLA’s Master Solicitation for Automated Simplified Acquisitions Revision 105.
Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7M5-26-T-401B
The contract pertains to Production Lot Testing for NSN 0001S00000062, with a quantity of 43 units, under solicitation SPE7M5-26-T-401B, which is a Total Small Business Set-Aside designated for small businesses under NAICS code 334416. The work must be performed at the place of performance in New Cumberland, Pennsylvania, with a delivery deadline 655 days after contract award. The contractor is required to conduct production lot testing and submit a formatted Production Lot Test Report clearly marked with the contract and lot/item numbers, which must be presented to the Quality Assurance Representative for review. All shipments of PLT reports must include mandatory documentation such as DD Form 1222 and DD Form 250 or iRAPT receiving reports signed by the QAR, a copy of the contract or order, all applicable test reports with actual results and tolerances from the technical data package, material and process certifications, process operations and inspection method sheets, and drawings used to manufacture the test samples with appropriate markings to restrict public disclosure and limit government use as necessary. The solicitation was posted on August 10, 2026, with a response deadline of August 21, 2026, and is managed by the Active Devices Division within the Department of Defense, with Matthew Stanko as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M0-26-T-035P
This procurement is for a single unit of a Transformer, Power and Transformer, Radio Frequency with National Stock Number 5950-00-671-6701, sourced from Honeywell Intl Inc Defense under part number 1289103-1, designated as a Critical Application Item. The contract is issued under solicitation SPE7M0-26-T-035P by the Department of Defense through the DLA Land and Maritime Maritime Supply Chain ESOC Buys office, with a required delivery date of August 7, 2026, and a delivery window of five days ADO under FOB Origin terms. Inspection and acceptance both occur at the destination location, Tinker AFB, OK, with the contractor required to comply with DLA’s Master List of Technical and Quality Requirements, which supersede commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for labeling, with hazardous materials following FED-STD-313 and TQ requirement IP025, while non-hazardous items must meet commercial packaging standards unless overridden by DLA requirements. Palletization must conform to RP001, and all shipments must use traceable freight methods; parcel post is expressly prohibited. The contractor must also comply with stringent cybersecurity mandates, including CMMC Level 2 self-assessment and DFARS 252.204-7012 for safeguarding Covered Defense Information, along with related clauses on cyber incident reporting, third-party data disclosure, and prohibition of certain telecommunications equipment under DFARS 252.204-7018. The Buy American Act and DFARS 252.225-7001 apply due to the contract value exceeding the micro-purchase threshold, with additional constraints prohibiting hexavalent chromium and hazardous material disposal. The contract incorporates mandatory clauses on whistleblower rights, disclosure controls, electronic payment processing via WAWF, and limitations on arbitration agreements. All offers must be submitted through DIBBS by August 21, 2026, and the solicitation is structured as a small business set-aside with specific representations required from respondents regarding their compliance with federal regulations, entity identification, and supply chain security prohibitions, particularly those targeting Communist Chinese military companies. The item is certified under DPAS for national defense priority rating, and all administrative and payment data must align with government-established DoDAAC codes upon
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTR
Solicitation # SPE7M5-26-T-400D
The contract solicits a single unit of a fixed electrolytic capacitor with NSN 5910010128952, manufactured by Cornell-Dubilier Marketing Inc under part number 500123U025AC2B, for delivery to the U.S. Army AWCF SSF at Fort Campbell, Kentucky. Delivery is required within 10 days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, with compliance to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including a special marking code ZZ for unique requirements. The contractor must apply lead status markings per IPC/JEDEC J-STD-609 on each unit pack, with placement following paragraph 6.2 of the standard. Technical and quality requirements from the DLA Master List, identified by R or I numbers, are incorporated by reference. The item is subject to stringent hazardous material handling protocols, including labeling per 29 CFR 1910.1200, prohibition of hexavalent chromium, and restrictions on toxic substance storage. Shipping must be via the fastest traceable means excluding parcel post, with mandatory electronic submission through DIBBS by August 21, 2026. The contract includes compliance with numerous FAR and DFARS clauses, including cybersecurity safeguards under DFARS 252.204-7012, prohibitions on covered telecommunications equipment, restrictions on sourcing from Communist Chinese military companies, and adherence to Buy American and Berry Amendment requirements. The contractor must maintain current SAM representations, affirm non-provision of restricted telecommunications equipment, and comply with all workforce representation and anti-trafficking obligations. Payment and logistics administration follow electronic submission standards under Wide Area Workflow and Electronic Submission of Payment Requests. The contract is not a small business set-aside, and the offeror must certify compliance with all socioeconomic, environmental, and defense procurement regulations applicable to the acquisition.
ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, VARIABLE
Solicitation # SPE7M5-26-T-401E
The contract solicitation SPE7M5-26-T-401E seeks the procurement of 14 units of a variable resistor with NSN 5905-01-568-7038 under a simplified acquisition process, with a total contract value of $196.00 at a unit price of $14.00. Delivery is required within 164 days from the order date, with FOB Origin terms placing transportation responsibility on the contractor, and all supplies must be delivered to the designated receiving warehouse in Tracy, California. Packaging must strictly adhere to MIL-STD-2073-1E, utilizing QUP 001, preservation method 41 (Clng/Dry), and unit container E5 with eight units per intermediate container, while palletization follows DLA’s RP001 packaging requirements. Marking must comply with MIL-STD-129, including the special code ZZ for lead finish identification per IPC/JEDEC J-STD-609, requiring individual unit labeling to accurately denote Pb, Pb-Free, or other attributes in accordance with specified paragraphs of the standard. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with exceptions limited to functional uses in batteries, fluorescent lamps, instrumentation, sensors, weapon systems, or NAVSEA-specified reagents; portable mercury-containing devices must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. All hazardous materials must be documented and labeled per 29 CFR 1910.1200 and DFARS 252.223-7001, with Safety Data Sheets and hazard warning labels required prior to award. The contractor is subject to several compliance clauses including the prohibition on trafficking in persons, employment eligibility verification, safeguarding defense information per 252.204-7012, cybersecurity requirements linked to NIST SP 800-171 with a specific DoD deviation, and restrictions on the acquisition of covered telecommunications equipment. Inspection and acceptance occur at the destination by the government, and invoicing must be submitted electronically through WAWF using approved document types. Offerors must possess a valid UEI and CAGE code, represent their small business status if applicable, and submit proposals exclusively via the DIBBS portal by August 21, 2026. The contract includes
ACTIVE DEVICES DIVISION

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-T-6201
This contract pertains to the procurement of two electrical contacts identified by NSN 5999-01-170-7654, with a delivery deadline of 31 days after award. The solicitation number is SPE7M2-26-T-6201, posted on August 10, 2026, with responses due by August 21, 2026. It falls under NAICS code 334416 and is managed by the Nuclear Reactor Program under the Department of Defense. Performance is required in San Diego, California, with Alisha Blanton listed as the primary point of contact. The contract incorporates DLA packaging requirements and technical/quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware except in specified functional applications such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all items must be physically marked according to bare item marking requirements. The alternate offeror must submit a complete data package including details for both the approved and alternate parts, as no data is currently provided.
NUCLEAR REACTOR PROGRAM

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
Federal
59--TRANSFORMER,POWER, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEC
This contract pertains to the repair and modification of a POWER TRANSFORMER under a sole-source solicitation issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The requirement mandates that all repair work adhere strictly to the contractor’s approved technical procedures, manufacturer’s drawings, and government standards, with specific attention to the CAGE code 73030 and reference number NV822158-3. The item must be marked in compliance with MIL-STD-130 Rev N and must be entirely free of metallic mercury and any contamination, with strict prohibitions on its use unless explicit written approval is obtained. Any design, material, or part number changes require prior written authorization from the Contracting Officer and must be classified under one of six defined change codes depending on interchangeability and impact. The contract includes a one-year warranty on the repaired item, beginning from the date of delivery, with defects to be remedied within 45 days of discovery. Quality assurance responsibilities rest fully with the contractor, who must implement a comprehensive inspection system aligned with original manufacturer specifications and maintain all inspection records for 365 days post-delivery. Packaging and preservation must conform to MIL-STD-2073. The solicitation explicitly requires compliance with Buy American provisions, small business subcontracting goals, and security restrictions under recent government deviations. An optional increase in quantity is available within 180 days of award, with pricing submitted for both base and option quantities, and award will be based on the lowest aggregated total cost. The estimated repair-to-acceptance time is 81 days, inclusive of return shipment, and all contractual documents are deemed issued upon electronic delivery. Only authorized distributors of the original manufacturer may submit offers, and all supplied documentation must include proper distribution statements per OPNAVINST 5510.1.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 28 days
View Details
NAICS: 334416
New
DIBBS
Battery Power Supply Manufacturing and AssemblyThe contract calls for the full manufacturing, testing, and quality assurance of a defense-compliant Battery Power Supply designated by NSN 6130014459539, with stringent zero-defect standards required throughout all production phases. Compliance with CMMC Level 2 cybersecurity protocols is mandatory, ensuring the protection of controlled unclassified information during design, fabrication, and testing. The work must be performed at the specified place of performance in Elizabeth City, North Carolina, with all delivered units meeting exacting military specifications and undergoing rigorous quality controls to guarantee reliability and performance in operational environments. This is a total small business set-aside under the SBA program, reserved exclusively for small business concerns as defined by FAR 19.5, with the NAICS code 334416 covering battery manufacturing. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. The contracting activity falls under the Defense Logistics Agency, part of the Department of Defense, indicating the product's critical role in military logistics and power systems. All subcontractors must adhere to the full scope of performance requirements without deviation and must be prepared to demonstrate compliance with both quality and cybersecurity mandates during contract execution.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334416
New
DIBBS
Electronic Component Manufacturing – Ceramic CapacitorsThe contract pertains to the manufacture of fixed ceramic capacitors adhering strictly to military specifications MIL-PRF-20/36H and MIL-DTL-39028, encompassing all phases from wafer fabrication through assembly, testing, packaging, and final delivery. The performance must meet rigorous defense standards for reliability and performance under extreme conditions, with all work requiring full compliance with applicable military requirements. This is a subcontract opportunity issued under the Department of Defense’s Maritime Supply Chain, targeting industry partners capable of delivering high-integrity electronic components to specified military-grade criteria. The place of performance is established in Jacksonville, Florida, with the deadline for response set for August 20, 2026, and opportunity posted on August 9, 2026. The NAICS code 334416 classifies the work under Semiconductor and Other Electronic Component Manufacturing, indicating the specialized nature of the production process. No set-aside classification is designated, and while no point of contact is listed, the opportunity is accessible through the DIBBS platform using the provided RFQ link. Bidders are expected to demonstrate proven capability in military-grade capacitor production, with emphasis on quality control, traceability, and on-time delivery to support defense system requirements.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334416
New
DIBBS
Manufacture of MIL-SPEC Fixed CapacitorsThe contract requires the manufacture of a fixed electrical capacitor with NSN 5910014518713 and part number CWR06KB155KC, produced to meet the stringent technical specifications of MIL-PRF-55365K and MIL-PRF-55365/4L for use in defense systems. This is a subcontract for defense-related production, emphasizing strict adherence to military performance and quality standards to ensure reliability in classified or mission-critical applications. The capacitors must be fabricated to exacting tolerances and undergo rigorous testing to conform to the referenced military specifications, with the end product intended for deployment in military hardware under the oversight of the Department of Defense. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is classified under NAICS code 334416 for semiconductor and other electronic component manufacturing. The place of performance is specified as Fort Riley, Kansas, with a zip code of 66442-0000, indicating that production, testing, or delivery activities must occur at or near this location. The contract is managed by the Active Devices Division under the Department of Defense, and bidders must be prepared to fulfill all technical, compliance, and delivery requirements outlined in the military specifications without deviation. All work must be executed under the terms of a subcontracting arrangement, and the vendor must demonstrate capability to meet defense-grade timelines and quality controls.
ACTIVE DEVICES DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 326199
New
DIBBS
ESD/EMI Protective Packaging Supply
All Other Plastics Product Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541330
New
DIBBS
Traceability & Compliance Documentation Services
Engineering Services

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334413
New
DIBBS
Linear Microcircuit Component Supply (NSN 5962-01-107-9042)
Semiconductor and Related Device Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Small Business & Socioeconomic Reporting ComplianceThe contract requires support to the prime contractor in ensuring accurate and up-to-date representations on SAM.gov and full compliance with all small business and socioeconomic reporting obligations. This includes maintaining proper certifications, tracking changes in business status, and ensuring that all required data elements are correctly reflected in federal databases to preserve eligibility for set-aside programs and avoid penalties or contract disqualifications. The work focuses on administrative and compliance tasks critical to sustaining contractual status under federal procurement rules. This subcontract is issued under NAICS code 541611 for Management Consulting Services and is tied to the Department of Defense's Active Devices Division, with performance taking place at an FPO address with ZIP code 96694. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026. No specific set-aside designation is listed, and while the contracting office details are limited, the scope remains focused on safeguarding small business compliance for the prime contractor’s DoD obligations. All work must align with federal reporting standards and be executed with precision to avoid disruption to larger procurement activities.
Administrative Management and General Management Consulting Services

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Packaging SupportThe contract requires comprehensive regulatory support for the packaging, labeling, and submission of safety data sheets for hazardous materials associated with circuit breaker components, ensuring full compliance with applicable federal and international regulations. The work involves coordinating with internal and external stakeholders to classify materials accurately, prepare compliant packaging and labeling documentation, and timely submit safety data sheets where required, with the goal of maintaining uninterrupted supply chain operations and avoiding regulatory penalties. Performance is to be conducted under the Department of Defense’s Active Devices Division, with the place of performance listed as FPO, ZIP 96694, indicating the work may involve logistics support for military deployments or overseas operations. As a subcontract under NAICS Code 541690, the scope focuses on other scientific and technical consulting services tailored to hazardous materials regulatory compliance. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, and interested parties must meet all compliance requirements and deadlines to be considered for award.
Other Scientific and Technical Consulting Services

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335313
New
DIBBS
Circuit Breaker Supply – NSN 5925-99-357-9382A single circuit breaker with NSN 5925-99-357-9382 is being procured under a subcontract arrangement to meet DLA Master List compliance standards. The item must be delivered no later than 20 days after contract award, with all requirements tied to military specifications and logistical protocols. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, and is managed by the Active Devices Division within the Department of Defense. Performance is required at FPO, zip code 96694, under NAICS code 335313, indicating the procurement is specific to electrical equipment manufacturing within the defense supply chain.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541611
New
DIBBS
Export Control and Technical Data Management
Administrative Management and General Management Consulting Services

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Cybersecurity and CMMC Compliance Assessment
Administrative Management and General Management Consulting Services

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Logistics Compliance
Other Warehousing and Storage

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332320
New
DIBBS
Electrical Bracket Manufacturing and Delivery

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334418
New
DIBBS
Fixed Electrolytic Capacitor SupplyThe contract solicits the supply of a single fixed electrolytic capacitor identified by NSN 5910-01-012-8952, requiring full compliance with military and electronic component standards for marking, packaging, and hazardous materials handling. The item is intended for use in defense-related applications and must meet stringent quality and reliability benchmarks consistent with Department of Defense specifications. The solicitation is structured as a subcontract under NAICS code 334418, with performance required at Fort Campbell, Tennessee, and the deadline for responses set for August 21, 2026. The posting date is August 10, 2026, and the procurement is managed by the Active Devices Division within the Department of Defense. All submissions must be made through the designated DIBBS platform, and no set-aside provisions or agency-specific procurement preferences are indicated.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details
NAICS: 385990
New
DIBBS
Military Packaging & Marking Services

POSTED

about 24 hours ago

DEADLINE

in 10 days
View Details