Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Carbide-Tipped Snow Plow Blade Manufacturer

Active

State & Local

Response Deadline11/09/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of carbide-tipped snow plow blades for prime contractors working on State of New Hampshire Das Purchasing projects. The manufacturer is responsible for fabricating blades in several specifications, including 28C, 40C, 44C, and 44E, all featuring 3/4 inch by 6 inch dimensions and 8 inch on center hole patterns. Technical requirements include the use of carbide inserts, rubber matrix molding, and the application of identification stamps and a lead-free rust-resistant lacquer. To ensure quality and compliance, the provider must submit shop drawings and a Certificate of Analysis. All finished products are to be delivered F.O.B. Destination. This opportunity is categorized under NAICS code 332510 and is managed through the New Hampshire statewide Bids and Contracts office.

General Info

Manufacture and supply carbide-tipped snow plow blades for New Hampshire state purchasing projects.

Agency

New Hampshire → Das Purchasing (statewide Bids & Contracts)

NAICS

332510 - Hardware Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of 39-27.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLOW BLADES, NOSE PIECES, AND SHOES

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 03:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNew Hampshire → Das Purchasing (statewide Bids & Contracts)

ContactsNo contacts available

OfficeN/A

Organization / AgencyNew Hampshire → Das Purchasing (statewide Bids & Contracts)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies carbide-tipped snow plow blades for prime contractors on State of New Hampshire Das Purchasing projects. Fabricates blades in multiple specifications (28C, 40C, 44C, 44E) with 3/4" x 6" dimensions and 8" o/c hole patterns. Applies lead-free rust-resistant lacquer and identification stamps. Requires carbide inserts and rubber matrix molding. Provides Certificate of Analysis and shop drawings. Delivers finished blades F.O.B. Destination.

Similar Contracts

Same NAICS industry code

Fiber Optic System Tool Kit Manufacturer/SupplierThis subcontract opportunity is for a manufacturer or supplier to provide specialized Fiber Optic System Tool Kits to prime contractors supporting the Defense Logistics Agency Weapons Support ASC Supplier Oper AE and AF Division. The scope of work involves sourcing or manufacturing kits that include termination, testing, and maintenance tools in strict accordance with government specifications and drawings. The selected provider must conduct rigorous quality inspections to ensure part number accuracy and prevent corrosion. The contract spans a five-year period with a delivery requirement of 57 tool kits annually. As a Total Small Business Set-Aside under NAICS code 332510, the contract requires the provider to maintain CMMC unique identifiers for the processing of Federal Contract Information and Controlled Unclassified Information. Interested parties must respond by November 19, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Commercial Door Hardware Supplier/InstallerThis subcontract agreement outlines the requirements for a Commercial Door Hardware Supplier and Installer to support prime contractors on facility projects for the City of Murfreesboro. The selected provider is responsible for the supply and installation of various hardware components, including actuator kits, receivers, continuous hinges, and key switches, all of which must adhere to Section 08 70 00 standards. A critical component of the scope involves the precise keying of cylinders to align with the Owner's factory-registered system in accordance with ANSI/BHMA A156:5 and A156.28 specifications. The ultimate objective of the contract is the delivery of fully functional hardware sets and a completely integrated keyed entry system. Interested parties must submit their responses by November 12, 2026.

POSTED

about 5 hours ago

DEADLINE

53--SEAT,HELICAL COMPRESSI

Solicitation # SPE7LX27U0260

DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

NSN 5320-014147199, PIN-RIVET

Solicitation # SPE4A627Q0114

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7LX27U0286

DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

53--CAP,PROTECTIVE,DUST AN

Solicitation # SPE7LX27U0294

DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

53--COVER,ACCESS

Solicitation # SPE7L127T1834

DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

53--PADLOCK SET

Solicitation # SPE7LX27U0263

DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

53--STRAP,RETAINING

Solicitation # SPE7LX27U0299

DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

53--LATCH,THUMB

Solicitation # SPE7LX27U0297

DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

53--SPRING,HELICAL,COMPRES

Solicitation # SPE7LX27U0262

DLA Weapons Support

POSTED

about 8 hours ago

DEADLINE

Supply of Solid Rivets (NSN 5320-00-935-8991)This subcontract involves the manufacture or sourcing of 46 lbs of solid rivets identified by NSN 5320009358991 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires strict adherence to specific Department of Defense standards, including packaging per RP001, physical identification and bare item marking per RQ017, and origin inspection and acceptance protocols per RQ009. The performance of this contract will take place at Tinker AFB. Interested parties should note the response deadline of October 27, 2026, and the associated NAICS code 332510 for hardware manufacturing.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from New Hampshire → Das Purchasing (statewide Bids & Contracts)

Same awarding agency

Telephone & Data Communication Services

Solicitation # 9d1123e2-7cc2-4349-925e-f840753d3d3c

POSTED

about 4 hours ago

DEADLINE

Heavy Duty Plow Strap SupplierThis subcontract agreement establishes a partnership for the supply of industrial-grade straps used for plow blade attachments on State of New Hampshire Das Purchasing projects. The supplier is responsible for providing bundled straps made from industrial strength material in dimensions of 3 by 3 feet and 3 by 4 feet, ensuring full compatibility with Viking and Frink attachments for prime contractors. The opportunity is categorized under NAICS code 313210 and is managed by the New Hampshire Das Purchasing agency. Interested parties must adhere to the timeline associated with the posting date of October 20, 2026, with a final response deadline set for November 9, 2026.

Broadwoven Fabric Mills

POSTED

about 5 hours ago

DEADLINE

Cast Wing Shoe and Curb Runner ManufacturerThis subcontract involves the manufacture and supply of cast wing shoes and curb runners for prime contractors working on State of New Hampshire Das Purchasing projects. The scope of work includes casting and finishing wing shoes with specific hole configurations and fabricating left and right curb runners measuring 32.5 inches in length. To ensure compliance, the manufacturer must submit shop drawings for approval by the NHDOT Highway Maintenance department before beginning production. The contract is managed by the New Hampshire Das Purchasing agency under NAICS code 331511. Interested parties must adhere to the established timeline, with a response deadline set for November 9, 2026. The selected provider is responsible for the full lifecycle of the components, from initial design approval to the final delivery of the finished products.

POSTED

about 5 hours ago

DEADLINE

ASTM A36 Steel Adapter Blade SupplierThis subcontract involves the fabrication and supply of structural steel adapter blades and setup kits for prime contractors working on State of New Hampshire Das Purchasing projects. The supplier is responsible for cutting and punching adapter blades in 3-foot and 4-foot lengths using ASTM A36 Structural Grade hot rolled flat steel, ensuring specific top and bottom hole patterns are executed for 5/8 inch bolts. Additionally, the scope includes the assembly of 11-foot plow setup kits and the delivery of all finished steel components. To ensure compliance with state standards, the supplier must submit detailed shop drawings for approval by the NHDOT Highway Maintenance department. This procurement is managed through the New Hampshire Das Purchasing agency under NAICS code 332312, with a response deadline set for November 9, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 5 hours ago

DEADLINE

PLOW BLADES, NOSE PIECES, AND SHOES

Solicitation # 39-27

The State of New Hampshire, through the Department of Administrative Services, is soliciting bids for a non-exclusive contract to procure snow plow blades, nose pieces, and shoes. The equipment must be manufactured from new materials by experienced providers capable of producing at least 100 units annually. All components must be compatible with Frink or Viking truck attachments and ready for immediate use without modification. Key deliverables include various carbide blades, adaptor blades, straps, and wing shoes, with specific requirements for ASTM A36 Structural Grade hot rolled flat steel for adapter blades. Bidders are required to submit shop drawings for approval by the NHDOT Bureau of Highway Maintenance and provide Certificates of Analysis for carbide inserts and rubber molding. The award will be granted to the responsible vendor offering the lowest cost for conforming bids, with the possibility of awards by individual items. Technical requirements include specific marking and identification stamps on each blade section, the use of lead-free rust-resistant lacquer, and the exclusion of lacquer on carbide edges to allow for physical inspection. Delivery must be completed within 30 days of a purchase order, with prices quoted as F.O.B. Destination. A pre-inspection is mandatory prior to delivery. Bids must be submitted via email to the Bureau of Purchase and Property by November 9, 2026, and must include a signed transmittal letter, pricing offer, and vendor contact information.

POSTED

about 5 hours ago

DEADLINE

30 Yard Solid Waste Compactor

Solicitation # 48-27

The New Hampshire Department of Administrative Services is soliciting bids for the one-time purchase of a 30-yard self-contained solid waste compactor to be delivered to New Hampshire Hospital in Concord. The equipment must feature a 10 HP, 3-phase, 480V power system and a doughouse container with slanted double rear feed doors. While the initial request specified a refurbished unit, the state will consider offers for both new and refurbished equipment. The successful vendor must provide the cord plug configuration, although the state will handle the actual installation. All deliveries are FOB Destination and must be completed within 30 days of the purchase order receipt. The contract will be awarded to a single vendor that meets all technical specifications and offers the lowest total cost. Bids are due by October 28, 2026, at 11:00 AM Eastern Time and must be submitted via email. Vendors must be registered to conduct business in New Hampshire and have a completed Vendor Application Package on file with the Bureau of Purchase and Property. The equipment includes a warranty period starting upon inspection and acceptance by the state. Payment terms are set at 30 days following the receipt of a detailed invoice or final acceptance of the delivery, whichever occurs later.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Trailer, Tilt Deck Equipment

Solicitation # 44-27

The New Hampshire Department of Administrative Services is soliciting bids for a one-time purchase of a new Tilt Deck Equipment Trailer. The required trailer must feature a minimum GVWR of 18,400 lbs, a usable deck length of 25 feet for full tilt, and a minimum overall width of 102 inches. Technical specifications include a DOT-compliant LED sealed lighting system, Grade 70 safety chains, and an industrial-grade corrosion-resistant coating equivalent to powder-coat or epoxy-based finishes. All equipment must be new and of the current model year. The contract will be awarded to the responsible vendor who submits a conforming bid at the lowest cost, though equivalent models may be considered if documentation proves they meet or exceed all mandatory performance criteria. The successful vendor must deliver the trailer F.O.B. Destination to the NHDES-Dam Bureau in Concord, New Hampshire, within 60 days of receiving the purchase order. A critical delivery requirement specifies that the end user cannot offload trailers from stacked delivery loads. The award includes a warranty for at least one year or the manufacturer's standard period, whichever is greater. Payment is due 30 days after the later of invoice receipt or final inspection and acceptance by the agency. Bids are due by October 27, 2026, at 10:30 AM Eastern Time and must be submitted via email to the Bureau of Purchase and Property. Vendors must be registered to conduct business in New Hampshire and have a completed Vendor Application Package on file.

Truck Trailer Manufacturing

POSTED

DEADLINE

Laboratory Equipment, Microscope & Accessories (Supply and Install) (Echo Revolve)

Solicitation # 40-27

Solicitation 40-27, issued by the New Hampshire Department of Administrative Services, seeks bids for the supply, delivery, and turn-key installation of an Echo Revolve R4 Upright Microscope and associated accessories for the NH Department of Fish and Game in Concord, New Hampshire. The required equipment is a hybrid fluorescence microscope capable of flipping between upright and inverted modes, featuring a 12.9-inch iPad Pro Retina display. Key deliverables include the microscope system, specific LED light cubes, various objective lenses, an ELWD universal condenser, stage inserts, and a digital haze reduction software module. The successful vendor must complete delivery and installation within 45 business days of the contract award. The contract will be awarded to the responsible vendor who submits a conforming bid meeting all technical specifications at the lowest total cost. Bids are due by October 23, 2026, and must be submitted via email to the Bureau of Purchase and Property. Vendors are required to provide proof of comprehensive general liability insurance of at least 1 million dollars per occurrence and 2 million dollars aggregate, as well as workers compensation insurance. Environmental guidelines encourage the elimination of PVC and polystyrene and the use of SmartWay transport partners. Payment terms are set at 30 days following the receipt of an itemized invoice after the equipment has been delivered, inspected, and accepted by the agency.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Rental, Heavy Equipment Rental with or without Operator, Service

Solicitation # 3160-27

Solicitation 3160-27, issued by the New Hampshire Department of Administrative Services, seeks to establish multiple contracts for heavy equipment rental, both with and without operator services. The primary purpose of these rentals is to support the maintenance and repair of wildlife habitats, stream crossings, trails, and woods roads across various New Hampshire counties. The scope includes a vast array of machinery, such as tracked excavators, dozers, wheel loaders, cranes, and specialized attachments like mulching heads and hydraulic breakers. The state intends to award contracts based on the lowest cost per equipment type, location, and availability to ensure comprehensive statewide coverage. The resulting contracts are intended to run for approximately five years, commencing upon approval and continuing through February 29, 2032, with a typical peak season from May 1 to December 1. Vendors must be registered with the NH Bureau of Purchase and Property and the New Hampshire Secretary of State. Key requirements include providing comprehensive general liability insurance of at least 1 million dollars per occurrence and 2 million dollars aggregate, as well as adhering to the Worker's Right to Know Act by providing material safety data sheets. Performance is generally expected between 7:30 A.M. and 4:00 P.M. on business days, with vendors responsible for all labor, transportation, and turnkey delivery and testing.

Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Food, Beverages, Coffee and Tea

Solicitation # 3163-27

Solicitation 3163-27, issued by the New Hampshire Department of Administrative Services, seeks a vendor for the supply and delivery of coffee and tea to state facilities, specifically the NH Veterans Home in Tilton and the Glencliff Home for the Elderly. The contract is scheduled to run for approximately five years, from December 1, 2026, through November 30, 2031, with a possible two-year extension. The scope includes providing all labor, materials, and transportation necessary to deliver regular and decaffeinated coffee and tea bags within five business days of an order. Award will be based on the lowest total cost, provided the offered products meet or exceed the state's minimum quality standards. Vendors must be registered with the NH Bureau of Purchase and Property and the New Hampshire Secretary of State. Required insurance includes comprehensive general liability with limits of 1 million dollars per occurrence and 2 million dollars aggregate, as well as workers compensation. Payment terms are set at 30 days after invoice receipt or delivery acceptance, with prompt payment discounts available for early settlement. Bids must be submitted via email to the Bureau of Purchase and Property by October 23, 2026, at 10:00 AM Eastern Time. All orders must adhere to industry packaging standards, and the successful contractor must provide a dedicated account representative to manage the contract.

Coffee and Tea Manufacturing

POSTED

DEADLINE

Guardrail Delineator Posts

Solicitation # 43-27

Solicitation 43-27, issued by the New Hampshire Department of Administrative Services, is a request for bids for a one-time purchase order for the supply and delivery of guardrail delineator posts. The scope is strictly limited to the procurement of 3,000 Bend Back 72-inch and 3,000 Bend Back 84-inch U-channel delineators, specifically excluding reflector plates and mounting bolts. No installation services are required. All products must meet NHDOT Standard Specifications Section 621, requiring flanged channel section steel conforming to ASTM A 36, galvanization per AASHTO M 111, and retroreflective sheeting conforming to AASHTO M268 Type IV. The contract will be awarded to the responsible vendor submitting a conforming bid at the lowest cost, with the possibility of awards by individual items. Successful vendors must be registered to conduct business in New Hampshire and have a completed Vendor Application Package on file. Deliveries are FOB Destination to various District locations and must be completed within 90 days of the purchase order receipt. Each delivery requires a certificate of compliance, a certified mill test report, and a detailed bill of lading. Bids are due by October 26, 2026, at 9:30 AM Eastern Time via email to the Bureau of Purchase and Property.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Heavy Equipment Freight and Delivery (FOB Destination)This subcontract for Heavy Equipment Freight and Delivery involves the loading, hauling, and unloading of one 30-yard industrial waste compactor for prime contractors working on State of New Hampshire Bureau of Purchase and Property projects. The selected provider must utilize flatbed trailers and heavy-duty loading equipment to ensure the safe transport of heavy industrial machinery. To be eligible, contractors must possess valid New Hampshire business registration and all necessary DOT certifications. The contract requires delivery of the unit FOB Destination within 30 days of the purchase order. This opportunity is managed by Das Purchasing for the state of New Hampshire, with a response deadline of October 28, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS