Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CARBON DIOXIDE

Active
SPE4A6-26-T-10YTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of carbon dioxide in cylinder form, with each cylinder containing 50 pounds and the total quantity ordered at 12 cylinders. The item is classified as a commercial off-the-shelf product with the NSN 6830-01-706-6465 and is supplied by Airgas USA, LLC under part number CD 50S. Delivery is required FOB destination within 423 days of the contract award, with no tolerance for quantity variance. The product must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, palletized according to DLA packaging requirements, and transported in accordance with applicable hazardous materials regulations. Cylinders not suitable for UN-certified fiberboard boxes must be palletized as Load Type IX per MIL-STD-147. Safety documentation including an approved SDS and OSHA hazard warning label is mandatory and must be reviewed and retained by technical personnel prior to award, with copies submitted to the DLA Aviation HMIRS office. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major unless otherwise defined in applicable documents. The entire contract incorporates technical and quality requirements referenced from the DLA Master List, including packaging, identification, hazardous communication, and removal of government markings on non-accepted supplies. The delivery destination is the DLA San Joaquin distribution center in Tracy, California, and the contract was issued under solicitation SPE4A6-26-T-10YT, with a response deadline of August 7, 2026, and an original required delivery date of October 5, 2027. Unit of issue is the cylinder (CY), and all transportation protocols are governed by DLA procedural notes C19 and C20.

General Info

Procure 12 cylinders of 50-lb CO₂, FOB destination, compliant with MIL-STD and hazardous material regulations, delivered to Tracy, CA by October 5, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

325120 - Industrial Gas ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A6-26-T-10YT

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
SHAMEKA EDWARDS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CARBON DIOXIDE
CARBON DIOXIDE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
"SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS
AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY
CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND
LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO
THE DLA AVIATION HMIRS OFFICE (VBA)."
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
UNIT OF ISSUE = CYLINDER (CY), ONE CY CONTAINS 50 POUNDS.
AIRGAS USA, LLC 24839 P/N CD 50S
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
SPE4A6-26-T-10YT
SECTION B
PR: 7017695583 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017695583 0001 CY 12.000
NSN/MATERIAL:6830017066465
DELIVERY (IN DAYS):0423
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
HAZARDOUS MATERIALS SHALL BE PACKAGED IAW HAZMAT REGULATIONS APPLICABLE TO THE MODE OF TRANSPORT
CYLINDERS THAT DO NOT LEND THEMSELVES TO USE OF A U.N. CERTIFIED 4G FIBERBOARD BOX DUE TO SIZE, WEIGHT, CONFIGURATION, ETC., SHALL BE PALLETIZED LOAD TYPE IX IAW MIL-STD-147.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
SPE4A6-26-T-10YT
SECTION B
PR: 7017695583 PRLI: 0001 CONT’D
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:10/05/2027 Original Required Delivery Date:10/05/2027
SPE4A6-26-T-10YT NSN/Part Number: 6830-01-706-6465 Quantity: 12 CY Purchase Request: 7017695583QTY: 12 Delivery: 423 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325120
New
Federal
Micro-Bulk Liquid Aviators Breathing Oxygen (LOX), Type II SupplyThe contract seeks the supply and on-demand delivery of 1,200 gallons per month of Micro-Bulk Liquid Aviators Breathing Oxygen (LOX), Type II, compliant with MIL-PRF-27219C specifications, to the U.S. Coast Guard Aviation Logistics Center in Elizabeth City, North Carolina. The product must be delivered reliably and on schedule to support aviation operations requiring high-purity oxygen, with the supplier responsible for maintaining consistent quality and timely response to operational demands throughout the contract period. The NAICS code 325120 indicates this is a chemical manufacturing contract, underscoring the technical and regulatory rigor required for production and handling. The solicitation was posted on July 30, 2026, with a response deadline of August 6, 2026, and is structured as a subcontract under the Department of Homeland Security. The contracting activity is managed by the Aviation Logistics Center (ALC), which requires adherence to military specifications and logistical precision for safe, continuous delivery. There is no set-aside designation specified, meaning the opportunity is open to all qualified contractors without geographic or size-based restrictions. The place of performance is fixed at Elizabeth City, NC, and all deliveries must be coordinated to meet the center’s operational needs without disrupting missions or safety protocols.
Aviation Logistics Center (ALC)(00038)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325120
New
Federal
Supply of Liquid Nitrogen
Aviation Logistics Center (ALC)(00038)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325120
New
Federal
Supply of Compressed Helium Gas
Aviation Logistics Center (ALC)(00038)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325120
New
Federal
Supply of Ultra-High Purity (UHP) Nitrogen Gas
Aviation Logistics Center (ALC)(00038)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325120
New
Federal
Supply of Compressed Argon Gas (333 CF)
Aviation Logistics Center (ALC)(00038)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325120
New
Federal
Supply of Compressed Acetylene Gas (140 CG)
Aviation Logistics Center (ALC)(00038)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325120
New
Federal
Helium Refrigeration System
Solicitation # 481327
Brookhaven Science Associates, LLC is seeking quotations for a Helium Refrigeration System to be used at Brookhaven National Laboratory in Upton, New York, under a contract with the U.S. Department of Energy. The solicitation, numbered 481327, is open for responses until August 10, 2026, and requires a firm price quote in U.S. dollars valid for 120 days, with all pricing submitted via the provided Enclosure C Quotation Pricing Sheet. The requirement is subject to the Buy American Act, and offerors must declare the country of manufacturer. Freight terms are FOB Destination, Freight Prepaid for domestic deliveries and Delivered Duty Paid for international shipments. All domestic offerors must have an active SAM Unique Entity ID and confirm current representations and certifications; foreign offerors are exempt from SAM registration but must submit the completed AMS-Form-050 Annual Representations and Certifications, which must be filed with BSA’s Procurement and Property Management Division prior to award. Offerors whose expected contract value exceeds $900,000 and are not classified as small or foreign businesses must submit a Small Business Subcontracting Plan or, if no subcontracting is anticipated, the Enclosure G Waiver. The successful vendor will also need to complete additional vendor onboarding documentation as required. All inquiries must be directed in writing to the designated point of contact, Kevin Kirkendall.
Brookhaven National Labor -Doe Contractor

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 325120
New
Federal
Compressed Bottled Gases for Aviation Logistics Center
Solicitation # 70Z03826QS0000009
The U.S. Coast Guard’s Aviation Logistics Center is seeking quotations for compressed bottled gases under solicitation number 70Z03826QS0000009, issued as a combined synopsis and request for quotation in accordance with FAR Part 12 and the Revolutionary FAR Overhaul effective April 27, 2026. This is an unrestricted, full and open competition for a firm-fixed price purchase order targeting suppliers with the expertise to deliver commercial-grade compressed gases, classified under NAICS code 325120 with a small business size standard of 1,200 employees. All interested parties must submit offers via email to jeremy.a.wood@uscg.mil by the deadline of August 6, 2026, at 12:00 p.m. EDT, including the solicitation number in the subject line; phone inquiries are not accepted. The required documentation, including detailed requirements, statement of work, and terms and conditions, is attached and must be fully adhered to. The place of performance is not specified beyond the agency’s location in Elizabeth City, North Carolina, and offers may be subject to an independent review process if a protest is filed.
Aviation Logistics Center (ALC)(00038)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325120
New
Federal
Blanket Purchase Agreement for Medical Gases and Dry Ice
Solicitation # HT942626QE031
This contract is a Blanket Purchase Agreement (BPA) for the supply of medical grade compressed and bulk gases, laboratory and specialty gases, gas-related equipment, dry ice pellets, and associated services in support of the Defense Health Agency and key U.S. Army Medical Research and Development Command facilities including WRAIR, USAMRIID, USAMRICD, USAARL, and USARIEM. The BPA encompasses delivery of a wide range of gas products including oxygen, carbon dioxide, nitrogen, air, chlorine, propane, and liquid nitrogen, with specific requirements for cylinder types, purity standards, and regulatory compliance. Dry ice must be delivered in wheeled bins holding 400 to 600 pounds of approximately 1/2 by 3/4 inch pellets and must meet FDA 21 CFR 110 and HACCP standards modeled after ISO 9001. All gas cylinders must be hydrostatically tested per federal regulations—every ten years for standard cylinders and every five years for DOT-3AL marked CO2 cylinders—and must be properly labeled with UN/NA numbers and current test dates, with full compliance to ISO standards for manufacturing, handling, and distribution. The contract requires telemetry access to major gas storage tanks and on-site pickup and delivery of cylinders, with standard deliveries within 48 hours and emergency responses within 24 hours. All deliveries are FOB Destination within the Continental United States, primarily to locations in Silver Spring, Maryland, and Dover, Delaware. The BPA is set aside exclusively for small businesses under FAR 19.5, with a NAICS code of 325120, and contractor performance is subject to strict quality control requirements including the submission of a detailed commercial Quality Control Plan. Invoicing must be submitted through the WAWF Receipt and Acceptance application within five days of delivery and must include valid CLIN and ACRN information. The Contracting Officer's Representative oversees inspection, acceptance, and coordination of facility access, while the contractor must comply with DHA privacy guidelines, HIPAA, OSHA reporting, and DoD security protocols including NCIC-III and TSDB background checks for non-CAC holders. Monthly purchasing reports and annual OSHA 300A reports are mandatory, with the latter due by February 1 each year. The solicitation was posted with a response deadline of July 30, 2026, and questions were due by June 22, 202
Army Medical Resources Acq Activity

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 325120
New
Federal
Microbulk Aviator's Breathing Oxygen for Aviation Logistics Center
Solicitation # 70Z03826QS0000010
The U.S. Coast Guard’s Aviation Logistics Center is soliciting quotations for Microbulk Aviator's Breathing Oxygen under solicitation number 70Z03826QS0000010, issued as a combined synopsis and Request for Quotation in accordance with FAR Part 12 and the Revolutionary FAR Overhaul effective April 27, 2026. This is an unrestricted, full and open competition for a firm-fixed price purchase order targeting small businesses defined as having up to 1,200 employees, with the applicable NAICS code 325120. Interested parties must submit their responses via email to jeremy.a.wood@uscg.mil by the deadline of August 6, 2026, at 12:00 PM EDT, ensuring the solicitation number is clearly stated in the subject line; phone inquiries are explicitly prohibited. Required documentation including the Requirements, Statement of Work, and Terms and Conditions are attached to the solicitation and must be reviewed for compliance. The place of performance is not specified beyond the agency’s location in Elizabeth City, North Carolina, and the point of contact for all submissions is Jeremy A. Wood, with Marina E. Decker available as a secondary contact. Proposals submitted after the deadline or through unauthorized methods will not be considered, and parties may request an independent review of any agency protest beyond the Contracting Officer’s level.
Aviation Logistics Center (ALC)(00038)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325120
New
DIBBS
Ammonia Chip Manufacturing and SupplyThe contract pertains to the manufacture and supply of high-purity ammonia chips identified by part number 6406020 and national stock number 6550-01-530-9390, specifically requiring compliance with military quality standards. The work is classified as a subcontract under NAICS code 325120, which corresponds to the chemical manufacturing sector, and is being procured by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 29, 2026, with a response deadline of August 4, 2026, indicating a narrow window for potential vendors to submit proposals. Although the location of performance and point of contact are unspecified, the procurement is part of a broader effort to secure critical chemical components for defense applications. The contract is open for competitive bidding through the DIBBS platform, and suppliers must demonstrate the ability to meet stringent military specifications for purity, consistency, and reliability of the ammonia chips.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 325120
New
DIBBS
Refrigerant Gas Supply – Tetrafluoroethane (R-134a)The contract entails the supply and delivery of three cylinders of high-purity Tetrafluoroethane, commonly known as HFC-134a or R-134a refrigerant, in DOT-approved pressurized containers, meeting the National Stock Number 6830013706207. The product is designated for use at a military training facility, ensuring compliance with federal specifications for refrigerant quality and safe handling. The material is procured under a subcontract managed by the Defense Logistics Agency under the Department of Defense, with the procurement classified under NAICS code 325120, which pertains to industrial gas manufacturing. The solicitation was posted on July 29, 2026, and while specific delivery location and point of contact details are not provided, the performance and fulfillment are tied to federal defense logistics standards. The contract is administered through the DIBBS system with a reference ID linked to the award SPS4A616D0226 and delivery SPE4A626FD29U.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541380
New
DIBBS
Product Verification Testing CoordinationThe contract requires the preparation, marking, and shipment of Product Verification Test (PVT) samples in full compliance with Department of Defense standards, including proper segregation of materials and complete documentation to ensure traceability and regulatory adherence. All activities must be conducted under strict guidelines to meet the DoD’s quality and procedural requirements for verification testing. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Performance will occur at an unspecified location, and the award is expected to follow competitive procedures under the Federal Acquisition Regulation.
Testing Laboratories and Services

POSTED

about 6 hours ago

DEADLINE

in 20 days
View Details
NAICS: 488510
New
DIBBS
Supply Chain & Logistics Compliance ManagementThe contract requires management of specific DLA logistics modules—C03, C07, C16, and C20—with a focus on maintaining adequate material buffers to prevent stockouts and ensure operational readiness. It mandates rigorous part number tracking to guarantee accurate inventory visibility and accountability across the supply chain, while ensuring full compliance with First Destination Transportation regulations to meet military shipment standards. All activities must align with strict logistical protocols to support timely and accurate delivery of critical components. This is a small business set-aside subcontract under NAICS code 488510, issued by the ASC Commodities Division within the Department of Defense, with a submission deadline of August 20, 2026. The solicitation is posted on the DIBBS system and is open only to small business concerns, emphasizing support for small business participation in defense logistics. While the place of performance and detailed point of contact information are not specified, successful bidders must be prepared to execute responsibilities across the Department of Defense’s logistics network without geographic limitation, ensuring all compliance requirements are met consistently and in real time.
Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

in 20 days
View Details
NAICS: 323111
New
DIBBS
Military-Compliant Labeling & BarcodingThe contract requires the application of permanent, MIL-STD-129-compliant labels and 2D barcodes to shipping containers used by the Department of Defense, ensuring full adherence to military standards for identification and tracking. Special markings must be included for test samples to distinguish them from standard shipments, with all labeling required to be durable and legible under operational conditions. This is a small business set-aside subcontract under NAICS code 323111, exclusively open to small businesses, and is managed by the ASC Commodities Division. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and performance is expected to support DoD logistics operations without specified geographic limitations, though exact location details are not provided.
Commercial Printing (except Screen and Books)

POSTED

about 6 hours ago

DEADLINE

in 20 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging & Preservation ServicesThe contract requires the provision of military-grade packaging and preservation services for adjustable clevises in full compliance with MIL-STD-2073-1E standards, ensuring that all items are properly cleaned, dried, and protected against corrosion and environmental damage during storage and transit. The packaging must include stretch wrap containerization as the specified method for securing and stabilizing the items within shipping containers, maintaining integrity and preventing movement during handling. All work must adhere to strict defense logistics protocols to guarantee readiness and operational reliability. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside category, designated under NAICS code 493190, and issued by the Department of Defense’s ASC Commodities Division. Interested parties must submit proposals by the deadline of August 20, 2026, with performance expected to meet exacting military specifications and timelines. The contract emphasizes quality control, regulatory compliance, and the use of approved preservation and packaging techniques to support the Department of Defense’s supply chain requirements.
Other Warehousing and Storage

POSTED

about 6 hours ago

DEADLINE

in 20 days
View Details
NAICS: 332710
New
DIBBS
Adjustable Clevis Manufacturing & SupplyThe contract calls for the manufacture and supply of adjustable clevises identified by NSN 5342-01-166-0578, to be produced in strict compliance with military specifications. This includes precision machining to exact dimensional and performance standards, along with proper packaging and marking requirements to ensure traceability and readiness for military use. The work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, meaning only eligible small businesses may submit bids. The NAICS code 332710 applies, categorizing the work under Other Metal Forge and Stamp. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, giving interested parties approximately three weeks to prepare and submit proposals. The contracting activity is the ASC Commodities Division under the Department of Defense, and the place of performance and point of contact details are not specified in the provided data. Bidders must ensure complete adherence to military standards, packaging protocols, and marking regulations, and submissions must be made through the official DIBBS portal accessible via the provided link.
Machine Shops

POSTED

about 6 hours ago

DEADLINE

in 20 days
View Details
NAICS: 332710
New
DIBBS
CLEVIS, ADJUSTABLE
Solicitation # SPE4A6-26-R-XC15
This contract, issued under solicitation SPE4A6-26-R-XC15 by the ASC Commodities Division of the Department of Defense, is a Total Small Business Set-Aside for the procurement of adjustable clevises with NSN 5342-01-166-0578, classified under NAICS code 332710. The contract operates as an indefinite-delivery, indefinite-quantity (IDIQ) mechanism with a five-year performance period and a total ceiling value of $350,000, requiring delivery within 80 days of order receipt. Performance is to be conducted at various CONUS stock locations under FOB Origin terms, with all items subject to strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, barcoding, and marking, including special notations for product verification test samples. The contract mandates use of Wide Area WorkFlow (WAWF) for all invoicing and receiving reports and includes detailed requirements for supply chain traceability, material buffer availability, and Vendor Shipment Module submissions. The contract incorporates a comprehensive set of FAR and DFARS clauses governing quality assurance, inspections, subcontracting, and compliance, with inspections occurring at both origin and destination under MIL-STD-1916, ASQ H1331, and MIL-STD-105 standards, demanding zero non-conformances unless otherwise specified. Subcontracting obligations require flowdown of key clauses, including those addressing commercial product sourcing and counterfeit electronic part avoidance, with specific requirements for subcontracts exceeding the simplified acquisition threshold. The contractor must comply with cybersecurity mandates such as NIST SP 800-171 under 252.204-7012, prohibited use of covered defense telecommunications equipment and foreign satellite services, and hazard communication labeling under OSHA guidelines. The contract prohibits unauthorized use of foreign-flag vessels and requires immediate notification if sea transportation is unexpectedly needed. Representations concerning small business status, labor practices, veteran and disability inclusion, trafficking in persons, and foreign sourcing (including Xinjiang and Russian-linked entities) are required and subject to SAM verification, with affirmative responses triggering additional reporting obligations. The award will be made through a best-value trade-off analysis heavily weighted toward past performance, particularly SPRS assessments, with cost considered as neither the sole nor primary factor. All submissions must be made electronically via DIBBS or email to
Machine Shops

POSTED

about 6 hours ago

DEADLINE

in 20 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging, Marking & PalletizationThe contract requires the final packaging, labeling, and palletization of eight cable assemblies in full compliance with MIL-STD-129, RP001, and DLA standards, ensuring all items are properly marked with data matrix barcodes and treated with protective preservation to maintain integrity during transport and storage. All work must be executed to meet rigorous military specifications for identification, traceability, and physical protection of sensitive components. The solicitation is classified as a subcontract under NAICS code 493190 and is managed by the ASC COMMODITIES DIVISION under the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The response deadline is August 4, 2026, and the solicitation was posted on July 30, 2026, leaving a limited window for qualified vendors to submit proposals through the provided DIBBS portal.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract requires the provision of hazard warning labels, Safety Data Sheets, and regulatory compliance documentation for military cable assemblies, ensuring adherence to OSHA and DFARS standards. All deliverables must accurately reflect the physical and chemical hazards associated with the materials used in the cable assemblies and be formatted to meet federal military specifications for safety and traceability. The work is classified as a subcontract under NAICS code 541620, targeting specialized environmental and regulatory compliance services, and is managed by the ASC Commodities Division within the Department of Defense. Performance is required at the designated location in New Cumberland, Pennsylvania, with a strict submission deadline of August 4, 2026, and an initial posting date of July 30, 2026. The solicitation does not specify a set-aside type or small business preference, indicating it is open to all qualified vendors. Compliance must be fully documented and verifiable through official channels, with the contracting office operating under the Defense Logistics Agency’s DIBBS platform for submissions and communications. Failure to meet label accuracy, SDS completeness, or regulatory alignment will result in non-compliance and potential contract termination.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract requires the manufacture of eight units of a military-spec electrical cable assembly identified by NSN 6150-01-632-3571, with full compliance to Department of Defense technical standards, including MIL-STD-129 labeling for uniform identification and hazmat regulations for safe handling and transportation. The work is classified under NAICS code 335999 and is issued as a subcontract through the ASC Commodities Division of the Department of Defense. All units must be delivered to the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, ensuring adherence to stringent military specifications throughout design, fabrication, testing, and packaging. The solicitation was posted on July 30, 2026, with responses due by August 4, 2026, creating a tight five-day window for qualified vendors to submit proposals. The contract is part of a broader defense supply chain initiative and demands strict compliance with all documentation, traceability, and quality assurance protocols aligned with federal procurement guidelines.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332618
New
DIBBS
PIN, LOCK
Solicitation # SPE4A6-26-T-10ZN
The contract pertains to the procurement of one pin and lock assembly identified by NSN 5315-01-686-7674 under solicitation SPE4A6-26-T-10ZN, with a required delivery within 90 days of contract award and a firm delivery date of November 6, 2026. The item is classified as a commercial item and is not subject to Item Unique Identification requirements per DFARS 252.211-7003(c)(1)(i). Packaging must fully comply with MIL-STD-2073-1E and DLA packaging standards, including specific preservation methods, packaging materials, and unit container details, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA’s procurement packaging requirements, and delivery is FOB origin to the specified destination at the DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling protocols aligned with MIL-STD-1916 or comparable zero-based plans, and acceptance criteria follow established quality assurance levels unless otherwise stipulated. The technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The unit of issue is each, and the purchase request number is 7017696787.
Other Fabricated Wire Product Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADIO F
Solicitation # SPE4A6-26-T-10YG
The contract pertains to the procurement of five radio frequency cable assemblies with the NSN 5995-01-671-1806, issued under solicitation SPE4A6-26-T-10YG by the Defense Logistics Agency’s ASC Commodity Division. Delivery is required within 276 days of award, and the work is to be performed at Tracy, California, 95304-5000. The item is subject to stringent technical and quality requirements aligned with the DLA Master List of Technical and Quality Requirements, including specific provisions for physical identification and bare item marking. Cybersecurity compliance mandates CMMC Level 2 certification for any third-party assessment organization involved, and the contract incorporates tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging must adhere to DLA procurement standards, and inspection and acceptance are to occur at origin. The cable assembly contains technical data subject to U.S. export control regulations under either ITAR or EAR, prohibiting unauthorized disclosure or export, including to foreign nationals within the United States. DFARS 252.225-7048 governs handling of this controlled data, and only contractors with an approved US/Canada Joint Certification Program certification, who have completed required DOD export control training and DLA’s questionnaire, may access the information. Government identification must be removed from non-accepted items, and the contract explicitly excludes unapproved distribution. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, under a NAICS code of 335931 for other electronic component manufacturing. Primary point of contact is Victoria Burcham, with contact details provided for inquiries.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-10UR
The contract is for the procurement of four plain hexagonal nuts with NSN 5310-01-392-8585, issued under solicitation SPE4A6-26-T-10UR by the ASC Commodities Division of the Department of Defense. Delivery is required within 336 days of award, and responses must be submitted by August 7, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item must comply with DLA packaging standards and physical identification requirements, and all government identification must be removed from any non-accepted supplies. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed in any sample unless otherwise specified, and attributes are to be classified with defined verification levels or AQLs. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless the contract dictates otherwise. Mercury and mercury compounds are strictly prohibited from intentional addition or direct contact with the hardware except for specific functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. Documentation for source approval must be provided as required, and the point of contact for the solicitation is Kela Griffin, with delivery performance designated to New Cumberland, PA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details