Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CARBON REMOVING COMPOU

Active
SPE4A6-26-T-11FGFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a carbon removing compound identified as a commercial off-the-shelf item with the NSN 6850-01-644-8407, supplied in boxes containing twelve 13-ounce aerosol cans each. The requirement specifies a quantity of 59 boxes to be delivered FOB destination within 114 days, with no variance allowed in quantity. The item carries a non-extendable shelf life of 30 months classified as Type I (Code P), and must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 to indicate shelf-life classification. Original manufacturer’s commercial packaging is mandatory, and repackaging is prohibited. Safety documentation is strictly regulated: a revised Safety Data Sheet (SDS) and OSHA-compliant hazard warning label must be reviewed, approved by technical personnel prior to award, and submitted to the DLA Aviation HMIRS office. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated in the contract, and verification levels are assigned per critical, major, and minor attributes. Delivery is to be made to the designated receiving warehouse in Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-11FG with a response deadline of August 10, 2026, and is managed by the Department of Defense’s ASC Commodities Division.

General Info

Procure 59 boxes of NSN 6850-01-644-8407 aerosol, FOB destination, no repackaging, 30-month shelf life, SDS and labels approved, zero defects required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-11FG DLA Aviation Automated Simplified Acquisition

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Briana Covington
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CARBON REMOVING COMPOUND
CARBON REMOVING COMPOUND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
"SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS
AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY
CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND
LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO
THE DLA AVIATION HMIRS OFFICE (VBA)."
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RS019: Shelf-life requirement RS001 for a TYPE I (CODE P) item with a shelf life of 30 months (non-extendable) applies to this item.
UNIT OF ISSUE = BOX (BX), ONE BX CONTAINS TWELVE 13-OZ AEROSOL CANS
BRP US INC 1UVT5 P/N 0777185
ZODIAC MILPRO AUSTRALIA PTY LTD Z5411 P/N ZB0777185
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A6-26-T-11FG
SECTION B
PR: 7017696024 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017696024 0001 BX 59.000
NSN/MATERIAL:6850016448407
DELIVERY (IN DAYS):0114
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ORIGINAL MANUFACTURER'S COMMERCIAL UNIT PACKAGING IS REQUIRED. REPACKAGING IS NOT AUTHORIZED.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:12/03/2026 Original Required Delivery Date:12/03/2026
SPE4A6-26-T-11FG
SECTION B
PR: 7017696024 PRLI: 0001 CONT’D

SPE4A6-26-T-11FG NSN/Part Number: 6850-01-644-8407 Quantity: 59 BX Purchase Request: 7017696024QTY: 59 Delivery: 114 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325998
New
DIBBS
FLUX, BRAZING
Solicitation # SPE7M2-26-T-5940
This contract is for the procurement of 6 jars (8 oz each) of Type A brazing flux with a NSN of 3439-00-913-4750, under solicitation SPE7M2-26-T-5940. The item is classified as a Type I (CODE H) critical application item with a non-extendable shelf life of 12 months, requiring strict compliance with shelf-life control markings and packaging standards. All supplies must adhere to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, including the special marking code 32 for Type I shelf life, and must meet ASTM-D-3951 and ICAO technical standards. Packaging must follow DLA’s procurement requirements and be palletized accordingly, with delivery FOB destination within 20 days and no variance allowed in quantity. The item is subject to configuration change management, hazardous communication standards, and strict prohibitions against intentional use of mercury or mercury-containing compounds, except for specific approved applications such as functional batteries or instruments as defined by NAVSEA, which must also include secondary containment. The contract requires full and open competition with performance controlled by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the revision effective on the solicitation issue date governs compliance. Government identification must be removed from non-accepted supplies, and all items must be inspected and accepted at the destination point.
NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325998
New
International
Supply of Industrial ChemicalsThe contract involves the procurement and delivery of industrial-grade chemical products specifically designated for sanitation, disinfection, and cleaning purposes within government facilities under the Ministry of National Security in Jamaica. These chemicals are essential for maintaining public health and operational hygiene across critical infrastructure managed by the agency, ensuring compliance with national safety and environmental standards. The scope encompasses consistent supply chain reliability, adherence to quality specifications, and timely distribution to designated locations across the country. This subcontract falls under the NAICS code 325998, indicating it relates to other chemical product manufacturing, and was posted on August 1, 2026, reflecting the government’s ongoing commitment to securing high-performance cleaning and disinfectant solutions. While specific details regarding quantity, pricing, or delivery schedules are not outlined, the contract implies a long-term operational partnership with suppliers capable of meeting stringent governmental requirements. All activities are to be conducted in alignment with national protocols, and the sole reference point for further information is the official e-procurement portal maintained by the Government of Jamaica.
Ministry of National Security

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325998
New
DIBBS
Antifreeze Supply and DeliveryThe contract entails the procurement and delivery of one unit of antifreeze identified by NSN 6850014649152 to a Defense Logistics Agency facility in Springfield, Ohio. The transaction is subject to DPAS Rating C requirements, ensuring priority handling and timely fulfillment in alignment with national defense priorities. Full traceability must be maintained throughout the shipping process to guarantee accountability and compliance with federal procurement protocols. This subcontract falls under NAICS code 325998 and is managed by the Department of Defense through the Defense Logistics Agency, with all delivery and documentation obligations tied to the referenced contract and delivery records.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325998
New
DIBBS
Antifreeze Supply (NSN 6850014413257)The contract requires the supply of one container of military-specification antifreeze identified by NSN 6850014413257, which must fully comply with the manufacturer’s technical specifications. This delivery is issued under subcontract SPE4A7-26-F-A0M2 and is specifically directed to be delivered to the Philippines. The item falls under NAICS code 325998, indicating it is part of other chemical product and preparation manufacturing, and is being procured by the Defense Logistics Agency on behalf of the Department of Defense. The contract was posted on August 1, 2026, and while details such as the exact delivery location within the Philippines and point of contact are not provided, the performance location is clearly designated to that country. The procurement is structured as a subcontract, meaning it is part of a larger contractual obligation and likely supports logistical or operational readiness requirements for U.S. military or allied forces stationed in the region.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325998
New
DIBBS
Corrosion Preventive Compound SupplierThe contract requires the supply of five gallons of Corrosion Preventive Compound identified by NSN 8030002133279, complying with applicable military specifications to ensure performance and durability under operational conditions. The product must be packaged and labeled strictly according to Defense Logistics Agency standards, ensuring traceability, handling safety, and regulatory compliance throughout the supply chain. Delivery is specified as FOB destination to Joint Base Lewis-McChord in Washington, meaning the supplier bears all transportation costs and risks until the goods are received at the designated military installation. This is a subcontract issued under the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 325998 for other chemical product and preparation manufacturing. The posting date indicates the opportunity was made available in August 2026, and the contract is linked to a specific DIBBS award record. The requirement is focused on timely and precise fulfillment to support defense readiness, with no set-asides or specialized procurement categories specified, implying it is open to qualified general contractors meeting technical and logistical criteria.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325998
New
DIBBS
Supply of Military-Grade Aircraft Grease (NSN 9150002698255)The contract entails the manufacture or supply of five containers of military-spec aircraft grease identified by NSN 9150002698255, meeting all applicable Department of Defense standards and specifications. Compliance with the Defense Federal Acquisition Regulation Supplement and the Defense Priorities and Allocations System is mandatory, ensuring the product adheres to federal procurement protocols for critical defense materials. The contract is classified as a subcontract under NAICS code 325998, managed by the Defense Logistics Agency on behalf of the Department of Defense, and is intended to support military aviation maintenance and operational readiness. Although the solicitation number and point of contact are not provided, the contract has been posted for performance on August 1, 2026, and the place of performance and delivery details remain unspecified. The associated DIBBS link references the award record, indicating that the procurement has been formally initiated under contract SPE4AX16D9008 with delivery order SPE4A726FA0J8. The requirement is part of a broader effort to secure standardized, high-performance lubricants for military aircraft systems, with delivery of the five containers subject to stringent quality control and documentation protocols to ensure full compliance with military specifications.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325998
New
DIBBS
Supply of Distilled Water (NSN 6810001071510) for Fort Richardson, AKTwenty drums of distilled water meeting military specifications are to be delivered to Fort Richardson, Alaska, with a firm delivery deadline of August 21, 2026. The product must conform to federal and Department of Defense standards for purified water, identified by NSN 6810001071510, and will be shipped under a subcontract arrangement. The procurement is managed by the Defense Logistics Agency under the Department of Defense, with the North American Industry Classification System code 325998 indicating it falls under other chemical product and preparation manufacturing. The delivery location is specified as a forward operating base, and all requirements must be fulfilled without deviation to ensure compliance with military operational needs.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325998
New
DIBBS
Supply of Penetrating Oil (SILIKROIL 10 OZ)The contract entails the procurement and delivery of 24 units of SILIKROIL 10 OZ penetrating oil, specifically requiring DFARS-compliant packaging and military labeling in accordance with the National Stock Number 9150012476313. All items must be shipped with full traceability and arrive at the designated location in Bangor, Maine, no later than August 21, 2026. The procurement is structured as a subcontract under the Department of Defense, managed by the Defense Logistics Agency, and classified under the NAICS code 325998 for other chemical product and preparation manufacturing. The delivery timeline and stringent compliance requirements reflect the military’s need for standardized, traceable logistics and regulatory adherence in support of operational readiness.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325998
New
DIBBS
Supply of Parting Compound (Chemical Release Agent)The contract entails the procurement and delivery of three containers of MIL-SPEC parting compound, a chemical release agent, to a U.S. Navy vessel under the National Stock Number 6850014474411. The material must fully comply with military specifications and is scheduled for FOB Destination delivery no later than August 17, 2026. The solicitation is classified as a subcontract issued by the Defense Logistics Agency under the Department of Defense, with the North American Industry Classification System code 325998 for other chemical product and preparation manufacturing. The performance location and point of contact details are unspecified, but the delivery endpoint is explicitly tied to a U.S. Navy vessel. The contract was posted on August 1, 2026, and is accessible via the DLA’s DIBBS system for award records.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325998
New
DIBBS
Supply of Brake Parts Cleaner (NSN: 6850011670678)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325998
New
DIBBS
Supply of Gear Lubricating Oil (NSN 9150010355393)The contract involves the procurement and delivery of 10 cans of gear lubricating oil conforming to NSN 9150010355393 for distribution to Joint Base Lewis-McChord in Washington. The shipment must be fully traceable from origin to destination, ensuring accurate logistics tracking and accountability throughout the supply chain. All invoicing must comply with DFARS requirements, guaranteeing adherence to federal defense contracting standards for documentation and financial reporting. The item falls under NAICS code 325998, indicating classification within miscellaneous chemical product manufacturing, and the contract is issued under the Defense Logistics Agency on behalf of the Department of Defense. The delivery location and compliance specifications reflect the stringent quality and regulatory demands typical of military supply obligations.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325998
New
DIBBS
Supply of Ball and Roller Bearing Grease (NSN 915001491593)The contract entails the procurement and delivery of five containers of military-specification grease formulated for use on ball and roller bearings, designated by NSN 915001491593, to support the USS Carl M. Levin (DDG 120). The grease must comply strictly with Department of Defense logistics standards and meet all technical, performance, and packaging requirements mandated for military-grade lubricants. This is a subcontract under the Defense Logistics Agency, operating within the broader framework of the Department of Defense supply chain, and the item is classified under NAICS code 325998, indicating it falls within other miscellaneous chemical product manufacturing. The delivery is designated for a specific naval vessel, underscoring the critical nature of maintaining operational readiness through reliable, standardized lubrication systems. All materials must align with established DoD quality assurance protocols and be traceable through the military supply network. While the solicitation number is not provided, the contract reference links to official DLA award records, ensuring visibility and accountability. The place of performance and point of contact details are unspecified, implying logistical coordination is managed centrally by DLA, with delivery likely originating from an approved defense contractor or warehouse within the global military logistics infrastructure.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11GX
This contract specifies the procurement of a cable assembly with part number 941292 and NSN 6150-01-678-1631, requiring two units to be delivered within five days of contract award. The items must meet all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and minor at Level II with an AQL of 4.0; unspecified attributes default to major. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adhering to DLA packaging standards. The items are designated as critical application items and must be physically identified per RQ017. Delivery is FOB origin with a zero variance tolerance, and inspection and acceptance occur at the origin. Documentation for source approval and removal of government identification from non-accepted items must follow specified procedures. The shipment is destined for the Joint Logistics Unit Vic in Bandiana, Australia, with freight handled by the Australian Government Cargo Office via DHL. The contract was issued under solicitation SPE4A6-26-T-11GX with a required delivery date of October 22, 2024, and is classified under NAICS code 335311, managed by the Department of Defense’s ASC Commodities Division.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, HEXA
Solicitation # SPE4A6-26-T-11GS
A hexagonal plain slotted nut, identified by NSN 5310-00-849-6883, is being procured in a quantity of 14 units under a fully competitive solicitation governed by military and federal specifications. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance taking place at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation, numbered SPE4A6-26-T-11GS, was posted on August 2, 2026, with responses due by August 10, 2026, and falls under NAICS code 332722 for screw, nut, bolt, and fastener manufacturing. The delivery timeline is set at 89 days after award, and the primary point of contact for inquiries is Vincent Price, reachable via phone or email provided through the Defense Logistics Agency’s DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CM
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-424-8044, for a quantity of four units, under solicitation SPE4A6-26-T-11CM. The required delivery timeline is 316 days after order, and the solicitation closed on August 10, 2026, with a posted date of August 2, 2026. The item falls under NAICS code 334419 and is procured by the Defense Logistics Agency’s ASC Commodities Division. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Marcita Robinson. The cable assembly is subject to stringent technical and quality requirements referenced from the DLA Master List, and must comply with DLA packaging standards. Surplus supply is explicitly not acceptable, and government identification must be removed from any non-accepted items. The item is governed by cybersecurity and export control policies, including CMMC Level 2 certification requirements for the third-party assessment organization involved, and the application of Covered Defense Information. Technical data associated with the cable assembly is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have received explicit approval from DLA authorities. DFARS 252.225-7048 governs the handling of this sensitive technical data.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, NAVIGATIONAL,
Solicitation # SPE4A6-26-T-11FH
The contract pertains to the procurement of a commercial off-the-shelf navigational marine light identified by part number 3680283000 and NSN 6220-01-729-1879, with a requirement for four units to be delivered within twenty days from the order date. The item is classified as a critical application item and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and labeling in accordance with MIL-STD-129 with the special marking code “01 - Fragile.” Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the quantity variance is strictly zero percent. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and is addressed to the Naval Amphibious Base Coronado in San Diego, California, with the freight address and shipment details clearly defined. The contract is issued under solicitation SPE4A6-26-T-11FH with a required delivery date of July 23, 2026, and is governed by DoD authorized unit of issue and acquisition procedures. All supplies must be free of government identification if not accepted, and government use fields indicate specific logistics and distribution codes for internal tracking.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EB
The contract specifies the procurement of a radio frequency cable assembly under solicitation SPE4A6-26-T-11EB, with a quantity of five units to be delivered within 20 days to Naval Station Newport, Rhode Island, FOB origin. All items must comply with stringent technical, quality, and packaging standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must adhere to MIL-STD-2073-1E preservation, MIL-STD-129 marking, and DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated as a critical application with source approval requirements and must be traceable throughout delivery, prohibiting parcel post in favor of certified freight methods. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in the product, packaging, preservation, or marking, with limited exceptions for functional components such as batteries or instruments specified by NAVSEA, which must include secondary containment. Packaging must meet palletization guidelines and use only approved materials, with special attention to the prohibition of mercury in any preservation or packing materials. The NSN 5995017220586 is the sole identified material, with a fixed quantity and no variance allowed. Shipments must be directed to the designated military address, labeled appropriately, and delivered by the required delivery date of July 22, 2026. The contract is managed by the Department of Defense’s ASC Commodities Division, with point of contact Ernest Penrose, and the NAICS code 335931 applies to the nature of the product being procured.
Current-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-11CQ
The contract pertains to the procurement of one unit of a PIN, RETAINING with NSN 5315-58-002-1217 and part number MUHLD148-831 from HIAB USA INC, issued under solicitation SPE4A6-26-T-11CQ. Delivery is required within 10 days FOB origin to the US Army SSA SUSBDE APS 405TH AFSB at Leutsestraat 34, Zutendaal 3690, Belgium, with inspection and acceptance occurring at the destination. The item is to be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging and palletization must adhere to DLA’s standardized requirements, and the unit of issue is EA. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated in the sample unless otherwise specified, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List, and the revision in effect at the solicitation issue date governs. The required delivery date is June 25, 2026, with no variance allowed in quantity. Transportation and shipping details align with DLAD Proc Notes C19 and C20, and the contract designates W51109 as the RDD and freight address, with government use codes and project identifiers included for tracking.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-11FE
The contract pertains to the procurement of three sleeve bearings identified by NSN 3120-01-198-2352 and part number KDJ08C015-241, with delivery required within 169 days to Robins Air Force Base in Georgia. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and manufacturing may involve casting or forging processes, necessitating potential tooling that the government does not necessarily possess; suppliers must submit a Casting and Forging Assistance Request if needed. The bearings must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 with no special marking codes applied. Unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Although item unique identification is not required per the service customer’s request, physical identification and bare item marking are still mandatory. The contract is governed by DFARS clauses and DLA packaging directives, with delivery FOB origin and transportation logistics defined by DLA procedural notes. The sole approved source data includes multiple manufacturers with identical part numbers, and the contract originates from the Department of Defense’s ASC Commodities Division under solicitation SPE4A6-26-T-11FE, responding to purchase request 7012343205 with a need ship date of November 16, 2025, and an original required delivery date of March 25, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EA
This contract pertains to the procurement of a cable assembly identified as RADI with NSN 5995-01-722-6071 and part number MINIBEND LR-41.00 manufactured by HUBER+SUHNER ASTROLAB, INC. A total of five units are required with a unit price of $5.00, resulting in a total contract value of $25.00, to be delivered within 20 days to the Naval Undersea Warfare Center Division Newport in Rhode Island. Delivery is FOB origin and inspection and acceptance occur at the destination. The item is classified as a commercial off-the-shelf (COTS) product and a critical application item, subject to specific quality and technical requirements referenced from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Strict packaging regulations apply, requiring compliance with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes needed. Packaging must adhere to DLA requirements, prohibiting any mercury or mercury-containing compounds in preservation, packaging, or labeling, in alignment with NAVSEA 5100-003D, except for specific functional uses in batteries, sensors, or instrumentation. Parcel post is prohibited; shipping must occur via traceable means. The item is not subject to Item Unique Identification per customer request, and all documentation must follow source approval and removal of government identification protocols where applicable. The contract references precise unit of issue standards and requires delivery by July 23, 2026, with procurement governed under solicitation SPE4A6-26-T-11EA and governed by the Department of Defense through the ASC Commodities Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
KEY, WOODRUFF
Solicitation # SPE4A6-26-T-11HZ
The contract under reference KEY, WOODRUFF, solicitation number SPE4A6-26-T-11HZ, issued by the Department of Defense’s ASC Commodities Division, requires the delivery of 20 units of NSN 5315-01-173-9441 with a delivery deadline of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions, unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stipulated. Documentation for source approval requests must comply with RC001 standards. The supplier is strictly prohibited from intentionally adding mercury or mercury-containing compounds to any supplied hardware or materials, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. All supplies must be marked per physical identification requirements and government identification removed from non-accepted items. The point of contact is Samantha Hopkins, and performance is set in San Diego, CA, with responses due by August 10, 2026.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-11GF
The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-11GW
The contract specifies the procurement of one shoulder screw, part number SR-16 with NSN 5305-01-549-2013, under solicitation SPE4A6-26-T-11GW, with a required delivery within 20 days from the contract date. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130N for physical identification marking and MIL-STD-129 for labeling. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The screw must be free of intentional mercury or mercury compounds throughout its manufacturing, packaging, and preservation, except for narrowly defined functional exceptions such as batteries or sensors, and even then must meet NAVSEA containment standards. Packaging must conform to MIL-STD-2073-1E with preservation methods specified, palletization as per DLA requirements, and prohibition of mercury in any preservation or packing materials. Delivery is FOB origin to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, with shipper required to use the fastest traceable means, explicitly excluding parcel post. The contract requires CMMC Level 2 self-assessment compliance, and all markings, packaging, and documentation must precisely follow government-prescribed formats, with no variance allowed in quantity.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details