This Solicitation opportunity from Department Of Defense was posted on May 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CASE, MEDICAL INSTRU
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract involves the procurement of a medical instrument case constructed of polyethylene plastic with dimensions approximately 32.75 inches long, 20.88 inches wide, and 25.94 inches high. The case features a detachable lid, tongue and groove gasketed parting line, spring action handles, and a pressure relief valve, designed to securely store and protect medical instruments. The unit of issue for this item is each (EA), and the contract specifies a quantity of one unit with delivery to be made within 84 days to the designated location. The packaging requirements follow commercial standards suited to protect contents from damage during shipment and comply with Medical Marking Standard No. 1. Additional contract provisions emphasize compliance with technical and quality specifications outlined in the DLA master list, as well as packaging and labeling requirements under the Defense Logistics Agency's guidelines. The contract excludes FDA regulation for this product and requires bidders to specify the source and part number they intend to supply. Inspection and acceptance of the goods occur at the destination point, with delivery to a military APO location. The solicitation is managed by the Department of Defense’s Medical Supply Chain MD SURG FSF and includes points of contact and relevant acquisition details for interested parties.
General Info
Agency
NAICS
Place of Performance
ATTN CL VIII MED REQ PROCES ACT, APO, AE, 09227-0000, USSet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
CASE, MEDICAL INSTRUMENT AND SUPPLY SET<(>,<)>
32.75 INCHES LONG BY 20.88 INCHES WIDE
BY 25.94 INCHES HIGH, POLYETHYLENE
PLASTIC WITH DETACHABLE LID<(>,<)>
TONGUE AND GROOVE GASKETED PARTING
LINE, WITH SPRING ACTION HANDLES AND
A PRESSURE RELIEF VALVE.
.
UNIT OF ISSUE EACH, EA
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
NOT REGULATED BY THE FDA.
.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
SPE2DS-26-T-057G
SECTION B
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
HARDIGG INDUSTRIES, LLC 11214 P/N 472-MED-30181509
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016702361 0001 EA 1.000
NSN/MATERIAL:6545015085608
DELIVERY (IN DAYS):0084
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
SPECIAL NSN/Part Number: 6545-01-508-5608 Quantity: 1 EA Purchase Request: 7016702361QTY: 1 Delivery: 84 days ADO