This Solicitation opportunity from Department Of Defense was posted on May 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CAST SEAT RING

Closed

SPMYM226Q7194Federal

Submission Closed05/22/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332919

New

SLED

Butterfly Valves & Fittings

Solicitation # 8936

The City of Waterbury is seeking sealed bids for the procurement of butterfly valves and fittings under bid number 8936. This invitation to bid is currently open, with a clarification deadline set for September 18, 2026, at 2:00 PM. All bids must be submitted to the office of the Director of Purchasing at City Hall, 235 Grand Street, Waterbury, CT 06702, by the deadline of 11:30 AM on September 29, 2026. Bids will be publicly opened and read aloud at that time, and no submissions will be accepted after the specified cutoff. For further inquiries, the primary point of contact is mmccauley@waterburyct.org.

POSTED

DEADLINE

47--REPAIR KIT,PIPE,EME

Solicitation # SPE7M3-26-T-9062

Solicitation SPE7M3-26-T-9062 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, Fluid Handling Division, for the procurement of 128 emergency damage control pipe repair kits under NSN 4730014146976. This is a total small business set-aside under NAICS 332919, with quotes due by September 21, 2026, via the DIBBS electronic system. The approved source is listed as 01CL4 BV-USA-2. Delivery is required by September 17, 2026, to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073-1 and MIL-STD-129. Suppliers of hazardous materials must provide Safety Data Sheets in accordance with Federal Standard No. 313-E and follow the Hazard Communication Standard for labeling. Payment will be processed electronically through the Wide Area Workflow system. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information is required. All quotes must be submitted electronically, and any use of non-domestic materials must be disclosed during the bidding process.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # N0010426QFF42

This solicitation is for the procurement of a Straight Tailpiece (piece 73), designated as Special Emphasis material due to its critical role in shipboard systems where failure could result in serious injury or loss of the vessel. The contract requires the use of ASTM-B369 UNS C96400 material and mandates rigorous quality controls, including hydrostatic testing, dye penetrant inspection, and radiography. All internal threads must be cut rather than cold-formed, and the contractor must adhere to strict DPAS DO-rated priority and Buy American standards. The delivery process involves a phased schedule including the submission of Radiographic Shooting Sketches and Production Radiography for approval prior to final delivery, which must occur within 365 days of the contract effective date. Documentation and certifications must be submitted via Wide Area Workflow (WAWF) to Portsmouth Naval Shipyard. The contract emphasizes strict configuration control, requiring formal Engineering Change Proposals for any modifications and a comprehensive certificate of compliance for all delivered items.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPE7M8-26-T-6631

This contract, solicitation number SPE7M8-26-T-6631, is issued by the Department of Defense Electrical Devices Division for the procurement of 46 pressure switches, identified by NSN 5930-01-410-9221 and Detroit Switch Inc part number 222-10NB16-2223676. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is January 11, 2027, with a delivery window of 75 days after receipt of order. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific prohibitions against the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Configuration change management and engineering change proposals are required for any variances, and the contract specifies that government identification must be removed from any non-accepted supplies.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Solicitation # N0010426QFD90

This firm fixed price solicitation is for the refurbishment of a control valve, designated as Special Emphasis SUBSAFE/Non-Level I material due to its critical role in shipboard systems. The contract requires the prime contractor to be the original equipment manufacturer and mandates that all work be performed according to specific NAVSEA approved procedures and technical data packages. Key requirements include strict adherence to quality systems such as ISO-9001, the application of unique serial numbers for traceability, and the submission of comprehensive certificates of compliance and test reports for non-destructive and hydrostatic testing. The agreement emphasizes rigorous quality assurance, requiring government source inspection and the approval of all welding and brazing procedures prior to execution. It establishes a strict configuration control process where any waivers, deviations, or engineering change proposals must be reviewed and approved by the contracting officer. All certification data and final documentation must be submitted via Wide Area Workflow for review and acceptance by the Portsmouth Naval Shipyard before any material is shipped.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

FPAIC AUGMENTATION PARTS

Solicitation # FA527026QA058

POSTED

DEADLINE

VACUUM BREAKER ASSY — 4820015535794 — SPRMM126QGF68

Solicitation # SPRMM1-26-Q-GF68

Solicitation SPRMM1-26-Q-GF68, issued on September 11, 2026, by DLA Mechanicsburg for the Department of the Navy, seeks the manufacture and procurement of a Vacuum Breaker Assembly (NSN 4820-01-553-5794). The required assembly must conform to the design represented by Cage Code 57RT4, reference number 153-003-D-063, and adhere to TDP version 002. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations based on LPTA criteria and supplier performance risk as tracked in the Supplier Performance Risk System. The contractor is responsible for all inspection and quality assurance at the point of origin, maintaining records for 365 days after final delivery. Physical identification must comply with MIL-STD-130, and packaging must adhere to MIL-STD-2073-1, with specific marking requirements per MIL-STD-129. Offerors who are not the original manufacturer must provide proof of authorized distributorship on company letterhead and provide traceability evidence for identification. Payment and invoicing shall be processed electronically through the Wide Area Workflow system. Special requirements include compliance with cybersecurity standards for safeguarding covered defense information and the provision of Material Safety Data Sheets for any hazardous materials delivered.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Supply of Pipe Cross Assemblies (NSN 4730-01-541-8067)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Hose Elbows (NSN 4730015085468)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Strip Seals (NSN 5330005881051)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Check Valves (NSN 4820016177314)

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of Fluid Filter Elements (P/N ACB856F2)

MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days

AI Contract Overview

The solicitation SPMYM226Q7194 seeks quotes for a CAST SEAT RING under a Request for Quotation with a firm deadline of 1:00 PM Pacific Time on May 22, 2026. All responses must include a fully completed and signed solicitation form, the manufacturer’s name and country of origin, the CAGE code or DUNS number, the company’s size classification as small or large, and pricing quoted exclusively as FOB Destination Bremerton, WA, along with the lead time for delivery. Offerors are required to submit the part number and original manufacturer specification sheets—copied and pasted versions are not acceptable—and must provide a redacted quote or email from the manufacturer or distributor. The item is governed by multiple Federal Acquisition Regulation clauses, including compliance with commercial item acquisition procedures under FAR 52.212-1 and 52.212-4, representation requirements under FAR 52.204-7 and 52.204-22, and specific supply chain security mandates such as the Federal Acquisition Supply Chain Security Act and prohibitions on procurement from the Xinjiang Uyghur Autonomous Region. Packaging and marking must conform to ASTM-D-3951 and MIL-STD-2073, with mandatory use of ISPM-15 compliant wood packaging and prohibition of asbestos, excelsior, loose fill polystyrene, newspaper, and shredded paper. Items must be uniquely identified per MIL-STD-130 with 2D Data Matrix symbols for Item Unique Identification, and all containers must be clearly marked with NSN or part number, noun nomenclature, quantity, contract number, and origin and destination details. Inspection and acceptance will occur at the Puget Sound Naval Shipyard in Bremerton, WA, with strict adherence to MIL-STD-2035A, Class 3 for dye penetrant inspection of castings and FAR 52.246-2 for fixed-price inspection. Any single nonconformance may result in rejection of the entire lot. Payment will be processed electronically through Wide Area WorkFlow, and invoices must reference DoDAAC N50082. The award will be made based on the most advantageous offer considering price and other unspecified factors, with no LPTA designation indicated. Offerors must also certify size status and disclose ownership relationships and potential use of covered telecommunications equipment or services in compliance

General Info

Request for CAST SEAT RING quotes, submit by May 22, 2026, FOB Bremerton, WA.

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

NONE

Documents

(2)

Material Ordering Data ASTM-A494/A494M

PDF•ordering-data

Solicitation SPMYM226Q71940001 for Seat Ring

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 20

Solicitation

Response DeadlineMay 22

Deadline has passed

Submission Closed

05/22/2026, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Maritime - Puget Sound

Contacts1 person available

OfficeBREMERTON, WA, 98314-5000, USA

Organization / Agency

Department Of Defense → DLA Maritime - Puget Sound

View Agency Profile

Office AddressBREMERTON, WA, 98314-5000, USA

Contacts

KIM VO

contact@example.gov

Full Description

The attachments are the Solicitation SPMYM2-26-Q-7194 and the Technical Ordering Data for a Quote Request.

** Only fully completed quotes submitted with a completed and signed solicitation, name & country of the manufacture, lead time for delivery (please quote with FOB destination price) will be considered. Quotes must be submitted via email to kim.vo@dla.mil.

Please make sure:

Fill out the solicitation for a completed quote.
Read box 28 and sign page 1 boxes 30 a, b, and c.
Provide your CAGE CODE or DUNS number.
Provide your company if it is SMALL or LARGE.
Please quote prices as FOB Destination Bremerton, WA.
Provide the LEAD TIME.
Provide the Name of MANUFACTURE.
Provide the Country of MANUFACTURE.
Provide the part #.
Provide the manufacture’s specification sheets of the quoted item. The copied and pasted one is not accepted.
Provide the redacted quote and email from the manufacturer/distributor for the quote you received.