Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Centrifugal Pump Unit Supply

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Fifteen centrifugal pump units are required under a subcontract to meet specific technical specifications, including compliance with MIL-STD-129 labeling standards and applicable defense procurement regulations. The contract is issued by the Department of Defense through the MARITIME SUPPLY CHAIN and is targeted for performance in Jacksonville, Florida, with a ZIP code of 32212-0103. The solicitation, categorized under NAICS code 333911 for pump and pumping equipment manufacturing, was posted on July 30, 2026, and responses must be submitted by August 10, 2026. All units must adhere strictly to military standards for documentation, packaging, and identification, ensuring seamless integration into defense logistics systems. The contract is not subject to any set-aside provisions and is open to qualified subcontractors through the DIBBS platform.

General Info

Fifteen centrifugal pumps required by DoD, must comply with MIL-STD-129, deliver to Jacksonville, FL, by August 10, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

333911 - Pump and Pumping Equipment ManufacturingView NAICS

Place of Performance

JACKSONVILLE, FL, 32212-0103, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 15 centrifugal pump units in compliance with technical specifications, MIL-STD-129 labeling, and defense procurement regulations.

Similar Contracts

Same NAICS industry code

Centrifugal Pump Unit SupplyThe contract is for the supply of three centrifugal pump units identified by NSN 4320015863481, with all units required to meet established technical specifications and National Stock Number standards. It is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses qualify to bid, as defined by the Small Business Administration under FAR 19.5. The North American Industry Classification System code is 333911, classifying the procurement within the pump and pumping equipment manufacturing sector. The solicitation was posted on July 30, 2026, with proposals due by August 10, 2026, and the place of performance is specified as Tracy, California, with a zip code of 95304-5000. The contract is managed by the Maritime Supply Chain under the Department of Defense, and all work must be completed in compliance with federal procurement regulations applicable to small business set-asides.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Air Compressor Supply and DeliveryThe contract mandates the supply and delivery of three commercial off-the-shelf air compressors identified by NSN 4310016600641, with strict adherence to military packaging and labeling standards as required for defense logistics. All items must comply with destination inspection protocols to ensure readiness and conformity before acceptance. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing support for small business participation in defense contracting. The NAICS code 333911 indicates the industry classification for other commercial and service industry machinery manufacturing, aligning with the nature of the compressors being procured. The contract was posted on July 30, 2026, with responses due by August 10, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a specific zip code provided for delivery coordination. The procurement falls under the Maritime Supply Chain organization within the Department of Defense, underscoring its relevance to naval or coastal logistics operations.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Vacuum Pump Unit Supply (COTS)The contract specifies the supply of one commercial off-the-shelf vacuum pump unit identified by NSN 4310016721960, engineered to meet military specifications with complete traceability throughout the supply chain. The unit must be labeled in full compliance with MIL-STD-129 standards to ensure proper identification, handling, and logistics integration within defense operations. Performance is mandated to occur at Suffolk, Virginia, with the delivery and acceptance subject to strict adherence to military procurement protocols. The solicitation is issued under the NAICS code 333911 for Vacuum Pump and Blower Manufacturing, reflecting the specialized nature of the equipment. This subcontract is part of the Department of Defense's Maritime Supply Chain ESOC Buy initiative, with responses required by August 10, 2026, following a posted solicitation date of July 30, 2026, ensuring timely acquisition of critical operational equipment.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Agitator Pump Supply (Submersible, Hydraulic-Driven)The contract seeks the supply of a submersible, hydraulic-driven agitator pump capable of delivering 200 gallons per minute at 50 pounds per square inch pressure, specifically designed for sediment agitation in reservoir environments. The equipment must meet stringent operational requirements to ensure effective sediment suspension and management in aquatic settings, with performance criteria aligned to field applications in challenging underwater conditions. The pump is intended for use in government-led environmental management or restoration projects under the purview of the Department of the Interior’s Great Plains Regional Office. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is classified as a subcontract under NAICS code 333911, which pertains to other commercial and service industry machinery manufacturing. There is no set-aside designation specified, indicating the opportunity is open to all qualified vendors without preferential treatment based on business size or status. The place of performance and point of contact details are not provided, and the procurement is accessible through the SAM.gov portal for potential bidders seeking further technical specifications or submission guidelines.

Great Plains Regional Office

POSTED

DEADLINE

Dredge Pump Supply (High-Pressure Hydraulic)The contract involves the supply of a high-pressure hydraulic dredge pump capable of delivering 400 gallons per minute at 100 pounds per square inch pressure, including all essential internal components such as the impeller, casing, wear plate, mechanical seal, and o-rings. This equipment is critical for specialized dredging operations requiring reliable, sustained high-pressure performance under demanding conditions, and the full assembly must meet rigorous operational and durability standards to ensure continuous use in rugged environments. The solicitation is classified as a subcontract under NAICS code 333911, associated with the Department of the Interior’s Great Plains Regional Office, with a response deadline of August 10, 2026, at 4:00 p.m. The posting date was July 30, 2026, providing suppliers approximately three weeks to prepare and submit compliant proposals. While no specific set-aside designation or place of performance details are provided, interested parties must ensure their submissions align with the technical specifications and delivery expectations outlined in the solicitation, with all correspondence and proposals directed through the official SAM.gov portal linked in the document.

Great Plains Regional Office

POSTED

DEADLINE

Custom Fire Pump System IntegrationThe contract calls for the supply and integration of a custom fire pump system designed to deliver 200 gallons per minute at 300 pounds per square inch of pressure, ensuring robust performance under demanding fire suppression conditions. All equipment must meet stringent compliance requirements under OSHA and NFPA standards, with comprehensive certified testing conducted prior to delivery and detailed documentation provided along with an official compliance plaque. The system must be fully integrated for immediate operational readiness at the designated location in Washington, D.C., 20019. This subcontract, issued under NAICS code 333911 by the USDA Forest Service within the Department of Agriculture, requires all proposals to be submitted by August 19, 2026, at 6:00 PM Eastern Time. The posting date was July 30, 2026, indicating a four-week window for qualified vendors to respond. There is no specified set-aside status, and the opportunity is open to eligible subcontractors seeking to fulfill this critical infrastructure requirement for federal emergency response systems.

USDA Forest Service

POSTED

DEADLINE

Fire Pump System IntegrationThe contract involves the supply, certification, and integration of a fire pump system including the installation of controls on the operator’s panel and comprehensive performance testing to ensure full operational compliance. The work is scoped under NAICS code 333911, indicating specialized machinery manufacturing for fire protection systems, and is structured as a subcontract to support the USDA Forest Service’s infrastructure needs. The system must meet stringent performance standards, with certification and testing protocols required to validate reliability under emergency conditions, and the controls integration must allow for seamless monitoring and operation via the designated operator panel. Performance is anticipated at the location identified by ZIP code 80742, though specific city or state details are not provided in the data. The opportunity was posted on July 30, 2026, with a response deadline of August 19, 2026, giving potential vendors approximately three weeks to prepare and submit proposals. While no set-aside classification or point of contact is listed, the solicitation is accessible through the SAM.gov portal, and bidders are expected to fully comply with federal procurement requirements governing subcontracted technical services for federal land management agencies.

USDA Forest Service

POSTED

DEADLINE

Wastewater Treatment Equipment Supply and InstallationThe contract entails the supply, delivery, and installation of mechanical process equipment for a 0.1 MGD wastewater treatment facility, including aeration systems, clarifiers, pumps, valves, and control panels. The work is classified as a subcontract under NAICS code 333911 and is being procured by the River Valley Regional Commission in Georgia. All equipment must be delivered and installed to meet the operational requirements of the facility, ensuring full compliance with technical and performance standards for wastewater treatment processes. The solicitation was posted on July 28, 2026, with a response deadline of September 3, 2026, at 7:00 PM. The contract does not specify a set-aside type or include details on the point of contact or exact location of performance, but the work is expected to be conducted within Georgia under the oversight of the River Valley Regional Commission. Interested parties must submit proposals by the stated deadline to be considered for award, and the procurement is accessible through the Georgia state procurement portal.

River Valley Regional Commission

POSTED

DEADLINE

in about 1 month

Reciprocating Pump Manufacturing and SupplyThe contract requires the design, fabrication, testing, and delivery of a single reciprocating pump identified by NSN 4320011792488, manufactured to meet all applicable military standards for quality, performance, and durability. The pump must be fully compliant with Defense Department regulations governing packaging, labeling, and shipment procedures to ensure secure and standardized handling throughout the logistics chain. All work must be completed and delivered to the specified location in Williamstown with a zip code of 26187-7952, adhering strictly to the technical and procedural requirements set forth by the Department of Defense through the Maritime Supply Chain agency. The solicitation, posted on July 28, 2026, requires proposals to be submitted by August 10, 2026, and is structured as a subcontract under NAICS code 333911, which classifies it within the pump and pumping equipment manufacturing sector. The contract is part of a broader effort to maintain critical military equipment readiness and relies on precise execution to meet operational needs.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Fuel Metering Pump (NSN 2910016915517)The contract requires the procurement and delivery of two commercial fuel metering pumps identified by NSN 2910016915517, fully compliant with DLA technical specifications, with all units due for delivery no later than July 28, 2026. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and it falls under NAICS code 333911 for engine, turbine, and power transmission equipment manufacturing. The performance location is designated as Fort Eustis, Virginia, with a response deadline of August 10, 2026, and the opportunity was posted on July 28, 2026, through the DLA’s DIBBS platform. The contracting activity is managed under the Land Supply Chain within the Department of Defense.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Sewage Pumping UnitsThe contract calls for the procurement and delivery of three sewage pumping units that must fully comply with military specifications, National Stock Number requirements, and approved packaging standards to ensure interoperability and logistical readiness within defense operations. These units are intended for use in a military context where reliability, durability, and adherence to federal technical guidelines are critical for field performance and maintenance. The procurement is classified as a subcontract under NAICS code 333911, indicating it falls within the Pump and Pumping Equipment Manufacturing sector, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The opportunity was posted on July 28, 2026, with a response deadline of August 10, 2026, and performance is to be carried out at Colts Neck, New Jersey, with a zip code of 07722-5001. The contract does not specify a set-aside designation, meaning it is open to all eligible contractors without preference given to small, veteran-owned, or other specialized business categories. While no point of contact is listed, all communications and submissions must be directed through the DIBBS platform via the provided UI link, ensuring transparency and centralized handling of the procurement process.

Defense Logistics Agency

POSTED

DEADLINE

Rotary Pump Supply – Mechanical Component DeliveryTwo rotary pumps, identified by NSN 4320-01-528-3382, are to be supplied and delivered to USNS CESAR CHAVEZ T-AKE 14 at FPO AP 96662, with full compliance to applicable military specifications. The delivery must be completed within twenty days of contract award, ensuring timely operational readiness for the vessel. The contract falls under the NAICS code 333911 and is classified as a subcontract, issued by the Department of Defense through the Maritime Supply Chain organization. The solicitation opened on July 28, 2026, with responses required by August 10, 2026, and the place of performance is designated as FPO with ZIP code 96662, indicating delivery to a U.S. military vessel stationed at a naval facility.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

RESOLVER, ELECTRICAL

Solicitation # SPE7M1-26-T-165Z

This contract is for the procurement of one electrical resolver, part number B-0720-015187-001, identified by NSN 5990-01-642-0113, supplied by IMECO INC under a restricted source requirement that mandates government engineering source approval. The item must comply with stringent DLA packaging and technical standards including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited except in specified functional applications such as batteries, fluorescent lights, sensors, and weapon systems, with any allowable mercury-containing portable devices requiring shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. Delivery is due within 20 days FOB origin to the destination point at USS TRIPOLI LHA 7, FPO AP 96694-2900, with zero tolerance for quantity variance and inspection and acceptance occurring at the destination. Shipping must be via the fastest traceable method, explicitly excluding parcel post, and must adhere to standardized palletization and container codes. The supplier is required to use the DLA VSM system for shipping coordination and must follow all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The contract, issued under solicitation SPE7M1-26-T-165Z, has a required delivery date of October 24, 2024, and is governed by Federal procurement regulations with the Department of Defense’s Maritime Supply Chain as the contracting authority.

Motor and Generator Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-220J

The contract pertains to the procurement of 45 power supply units identified by NSN 6120-01-705-6913 under solicitation SPE7M1-26-T-220J, with a delivery deadline of 181 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to source-controlled drawing requirements, meaning only the approved sources listed on the drawing are currently authorized, though additional approved sources may exist and have not yet been reflected. Offerors seeking future qualification must contact the cognizant design activity specified on the drawing. Configuration changes require formal engineering change proposals and variance requests. Cybersecurity compliance mandates CMMC Level 2 certification, either through a self-assessment or third-party assessment by a certified organization. Technical data associated with the item is subject to strict export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization; access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and DLA authorization. The place of performance is New Cumberland, Pennsylvania, and inquiries should be directed to Michael Reese at the provided DLA contact information.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M1-26-Q-1322

The contract pertains to the procurement of 127 units of a voltmeter with NSN/Part Number 6625-01-523-3022 under solicitation SPE7M1-26-Q-1322, issued by the Department of Defense through the Maritime Supply Chain office. Delivery is required within 155 days after contract award, and responses must be submitted by August 15, 2026. The item is subject to export control regulations due to the presence of technical data governed by either ITAR or EAR, meaning any disclosure, including to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies, and access to this technical data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by DLA. The place of performance is New Cumberland, Pennsylvania, with Misty Slone as the primary point of contact, and the NAICS code is 334514 for measuring and navigating instrument manufacturing.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

GRILLE, REAR, HOOD

Solicitation # SPE7M1-26-T-219L

The contract is for the procurement of 21 units of a rear grille for a hood, identified by NSN 4310-01-584-3027 and part number 158-72261, sourced from approved suppliers Parts Life Inc and Atlas Copco Hurricane LLC DBA. The item is to be delivered in 213 days from the contract award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all packaging and labeling subject to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. Palletization must adhere to RP001: DLA Packaging Requirements for Procurement. The delivery address is DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and the unit of issue is each, with a total price of $441.00 at $21.00 per unit. The contract is governed by the DLA solicitation SPE7M1-26-T-219L, issued on July 20, 2026, with responses due by July 31, 2026. The NAICS code is 333912, under the Department of Defense’s Maritime Supply Chain, and the primary point of contact is Michael Reese. The required ship date is March 2, 2027, with the original delivery deadline set for October 14, 2026. Transport and shipping instructions are governed by DLAD Proc Notes C19 and C20.

Air and Gas Compressor Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-218S

The contract solicitation SPE7M1-26-T-218S is for the procurement of five antennas with NSN 5985-01-682-0443 under a Women-Owned Small Business set-aside, with a total estimated value of $25.00. Delivery is required within 95 days after the delivery order, with the final destination being the DLA Distribution Facility in New Cumberland, Pennsylvania. The contract mandates strict compliance with DLA packaging requirements RP001 and MIL-STD-2073-1E, including specific packaging materials, palletization, and the use of Special Packaging Instruction AK16820443 Revision B for preservation. Marking and labeling must follow MIL-STD-129 with barcoding for all containers, alongside adherence to the Hazard Communication Standard for hazardous materials, requiring submission of Safety Data Sheets prior to award. The solicitation references the DLA Master List of Technical and Quality Requirements, with technical specifications governed by R and I numbers not fully detailed in this document. The contract includes numerous FAR and DFARS clauses relating to cybersecurity, including NIST SP 800-171 and safeguarding covered contractor information systems, as well as mandatory representations for small business status, employment eligibility, trafficking in persons, sustainable products, and prohibition of internal confidentiality agreements. Invoicing must be conducted electronically via Wide Area WorkFlow, and delivery is FOB destination, with government inspection and acceptance occurring at the destination. Contract administration requires electronic submission via DIBBS by the July 30, 2026 deadline, with no physical submissions permitted. All offerors must provide complete technical and compliance data packages, including UEI and CAGE codes, and certify their socioeconomic status, with failure to submit required documentation such as SDS leading to disqualification. The contracting officer is Caylee Frabott of the DLA Maritime Supply Chain, and while contract type and evaluation methodology are not explicitly stated, the context implies a simplified acquisition likely following a Lowest Price Technically Acceptable approach.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

MICROCIRCUIT, LINEAR

Solicitation # SPE7M1-26-T-219W

This contract is for the procurement of 50 units of a linear microcircuit under Federal Supply Class 5962, with a total value of $2,500. The item, identified by NSN 5962011407689 and part number 7109258-002, must be sourced from approved manufacturers including GE Aviation Systems LLC, Micro USPD Inc, and Microsemi Corp Massachusetts. Delivery is required FOB origin within 52 days to a designated storage and distribution facility in Columbus, Ohio, with no variance allowed in quantity. The contract mandates strict compliance with military packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, including special packaging for ESD and EMI protection that must meet MIL-PRF-81705 specifications using qualified barrier materials from QPL-81705. Each unit pack must be marked in accordance with IPC/JEDEC J-STD-609 to indicate lead content and finish. Traceability is critical: contractors must maintain supply chain documentation per DLA Procurement Note C03, submit a completed DLA L&M Form 918 with unredacted traceability or test reports via email no later than 15 days before delivery, and await written authorization before shipping. Shipment without authorization or discrepancies in documentation void payment. Sampling must follow MIL-STD-1916 or equivalent zero-defect standards, and all attributes are assigned strict verification levels. Mercury and mercury compounds are prohibited except in specific exempted applications per NAVSEA 5100-003D. The contractor must comply with cybersecurity requirements, including CMMC Level 2 self-assessment and DFARS 252.204-7012 for safeguarding covered defense information. The contract is a total small business set-aside under FAR 19.5, and all offerors must be registered in SAM and provide valid CAGE and UEI codes. Packaging must use A-A-59136 cushioning with density between 1.7 to 2.2 pounds per cubic foot and thickness exceeding component lead length by at least 1/8 inch, or use form-fitting ESD containers. Payment is to be rendered electronically through WAWF, and all submissions must follow strict email attachment protocols including file size limits and naming conventions. Compliance with all

Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

VALVE, SOLENOID

Solicitation # SPE7M1-26-T-4081

The contract pertains to the procurement of three solenoid valves with NSN 4810-01-325-4661 under solicitation SPE7M1-26-T-4081, with a required delivery within 83 days after award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds in direct contact with the supplied hardware, except for specific exemptions such as functional mercury in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA. Portable devices containing mercury must be shockproof and include a secondary containment boundary compliant with NAVSEA 5100-003D. The solicitation, posted on July 31, 2026, with a response deadline of August 5, 2026, is managed by the Maritime Supply Chain under the Department of Defense, with performance to be delivered to Tracy, California, 95304-5000. Primary point of contact is Haley Clark, reachable via email and phone provided.

Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

ELECTRICAL STANDARD

Solicitation # SPE7M1-26-T-219R

This contract, issued under solicitation SPE7M1-26-T-219R by the Department of Defense through the Maritime Supply Chain, requires the delivery of one unit of electrical equipment identified by NSN 6625013663837 with a specified delivery window of 20 days from the contract award. All supplies must comply with the DLA Master List of Technical and Quality Requirements referenced via R and I numbers, which take precedence over other standards such as ASTM D3951. The item may contain batteries and must be packaged according to RP001 for procurement, with detailed labeling and unit of issue protocols aligned to MIL-STD-129. Packaging must follow TQ requirement IP025 if the item is classified as hazardous under FED-STD-313; otherwise, commercial packaging per ASTM D3951 is acceptable. A complete Safety Data Sheet and OSHA-compliant hazard label must be provided at the time of quote if hazardous materials are present, and the offeror is responsible for self-identifying hazardous content per FED-STD-313 and FAR 52.223-3. The item must be delivered FOB origin with zero quantity variance, inspected and accepted at destination, and shipped using traceable freight methods—parcel post is prohibited. Delivery must reach the designated military supply facility at Twentynine Palms, California, and the contract specifies a required delivery date of March 6, 2026. All documentation and compliance must align with the DLA eProcurement system standards active on the solicitation issue date, with primary point of contact provided for procurement inquiries.

Bare Printed Circuit Board Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-220K

The contract specifies the procurement of piston rings identified by NSN 4310-12-332-0605 and part numbers K129850, 035962, and 062495, supplied by FEDERAL MOGUL GOETZE GMBH and SAUER COMPRESSORS USA, INC. The item is designated as a critical application component and must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; when present in portable lamps or instruments, mercury must be contained within shockproof units with a secondary barrier per NAVSEA 5100-003D. The contract mandates packaging consistent with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containment, and marking must adhere to MIL-STD-129 with no special marking codes applied. Palletization follows DLA packaging requirements and items must be delivered FOB origin with a total quantity of 11 units at a unit price of $11.00. Delivery is required within 136 days, with the original due date of October 29, 2026, and a need ship date of December 15, 2026. Inspection and acceptance occur at the destination, and the sole delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation, issued under SPE7M1-26-T-220K, is a total small business set-aside under NAICS code 333912, with response deadlines and contract details publicly accessible through DIBBS.

Air and Gas Compressor Manufacturing

POSTED

about 13 hours ago

DEADLINE

INDICATOR, FAULT LOC

Solicitation # SPE7M1-26-T-145G

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

FILTER ELEMENT, FLUI

Solicitation # SPE7M1-26-T-8835

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M1-26-U-4470

This contract is for the procurement of a nonmetallic hose assembly identified by NSN 4720013022941 and part number MS8005J490B, classified as a critical application item listed on the Qualified Products List or Qualified Manufacturers List, requiring strict compliance with specified technical and quality standards. The item must conform to MIL-DTL-25579H(4), Revision H dated November 17, 2025, and reference specification MS8005E NOT 1, Revision E dated April 4, 2024, with all requirements detailed in the DLA Master List of Technical and Quality Requirements identified by R or I numbers, which supersede other standards such as ASTM D3951. The contract is issued under the Defense Logistics Agency Master Solicitation for Automated Simplified Acquisitions Revision 105, applicable to indefinite-quantity contracts below the simplified acquisition threshold for a one-year period, with estimated annual quantity of two units, which is not firm and may not be purchased by the Indefinite Delivery Contracting office. Delivery is required within 78 days, FOB origin, with inspection and acceptance occurring at the destination under FAR 52.246-2, and packaging must comply with MIL-STD-129 for marking and labeling, palletization per RP001, and unit of issue as specified in the contract. The contract incorporates a comprehensive set of Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses addressing cybersecurity, data safeguarding, whistleblower rights, conflict of interest, hazardous materials, export controls, and prohibitions on certain foreign-origin equipment and services, including specific requirements under DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, DFARS 252.240-7997 for NIST SP 800-171 compliance with a deviation, and DFARS 252.223-7008 prohibiting hexavalent chromium. Contractors must use the Wide Area Workflow system for electronic payment requests and receiving reports, comply with Hazard Communication Standard labeling for hazardous substances unless exempted by other federal statutes, and submit hazard labels with Material Safety Data Sheets prior to award if applicable. All submissions must be made through the DLA Internet Bid Board System by July 31, 2026, and offerors are prohibited

Fabric Coating Mills

POSTED

about 13 hours ago

DEADLINE