Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Fire Pump System Integration

Active

Federal

Response Deadline08/19/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply, certification, and integration of a fire pump system including the installation of controls on the operator’s panel and comprehensive performance testing to ensure full operational compliance. The work is scoped under NAICS code 333911, indicating specialized machinery manufacturing for fire protection systems, and is structured as a subcontract to support the USDA Forest Service’s infrastructure needs. The system must meet stringent performance standards, with certification and testing protocols required to validate reliability under emergency conditions, and the controls integration must allow for seamless monitoring and operation via the designated operator panel. Performance is anticipated at the location identified by ZIP code 80742, though specific city or state details are not provided in the data. The opportunity was posted on July 30, 2026, with a response deadline of August 19, 2026, giving potential vendors approximately three weeks to prepare and submit proposals. While no set-aside classification or point of contact is listed, the solicitation is accessible through the SAM.gov portal, and bidders are expected to fully comply with federal procurement requirements governing subcontracted technical services for federal land management agencies.

General Info

Fire pump system supply, certification, integration, and testing for USDA Forest Service at ZIP 80742.

Agency

Department Of Agriculture → USDA Forest ServiceView Agency

NAICS

333911 - Pump and Pumping Equipment ManufacturingView NAICS

Place of Performance

80742, DC, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 06:00:00 PM UTCin 19 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → USDA Forest Service

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → USDA Forest Service

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply, certify, and integrate a fire pump system with performance testing and controls installation on the operator’s panel.

Similar Contracts

Same NAICS industry code

Centrifugal Pump Unit SupplyThe contract is for the supply of three centrifugal pump units identified by NSN 4320015863481, with all units required to meet established technical specifications and National Stock Number standards. It is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses qualify to bid, as defined by the Small Business Administration under FAR 19.5. The North American Industry Classification System code is 333911, classifying the procurement within the pump and pumping equipment manufacturing sector. The solicitation was posted on July 30, 2026, with proposals due by August 10, 2026, and the place of performance is specified as Tracy, California, with a zip code of 95304-5000. The contract is managed by the Maritime Supply Chain under the Department of Defense, and all work must be completed in compliance with federal procurement regulations applicable to small business set-asides.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Vacuum Pump Unit Supply (COTS)The contract specifies the supply of one commercial off-the-shelf vacuum pump unit identified by NSN 4310016721960, engineered to meet military specifications with complete traceability throughout the supply chain. The unit must be labeled in full compliance with MIL-STD-129 standards to ensure proper identification, handling, and logistics integration within defense operations. Performance is mandated to occur at Suffolk, Virginia, with the delivery and acceptance subject to strict adherence to military procurement protocols. The solicitation is issued under the NAICS code 333911 for Vacuum Pump and Blower Manufacturing, reflecting the specialized nature of the equipment. This subcontract is part of the Department of Defense's Maritime Supply Chain ESOC Buy initiative, with responses required by August 10, 2026, following a posted solicitation date of July 30, 2026, ensuring timely acquisition of critical operational equipment.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Agitator Pump Supply (Submersible, Hydraulic-Driven)The contract seeks the supply of a submersible, hydraulic-driven agitator pump capable of delivering 200 gallons per minute at 50 pounds per square inch pressure, specifically designed for sediment agitation in reservoir environments. The equipment must meet stringent operational requirements to ensure effective sediment suspension and management in aquatic settings, with performance criteria aligned to field applications in challenging underwater conditions. The pump is intended for use in government-led environmental management or restoration projects under the purview of the Department of the Interior’s Great Plains Regional Office. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is classified as a subcontract under NAICS code 333911, which pertains to other commercial and service industry machinery manufacturing. There is no set-aside designation specified, indicating the opportunity is open to all qualified vendors without preferential treatment based on business size or status. The place of performance and point of contact details are not provided, and the procurement is accessible through the SAM.gov portal for potential bidders seeking further technical specifications or submission guidelines.

Great Plains Regional Office

POSTED

DEADLINE

Dredge Pump Supply (High-Pressure Hydraulic)The contract involves the supply of a high-pressure hydraulic dredge pump capable of delivering 400 gallons per minute at 100 pounds per square inch pressure, including all essential internal components such as the impeller, casing, wear plate, mechanical seal, and o-rings. This equipment is critical for specialized dredging operations requiring reliable, sustained high-pressure performance under demanding conditions, and the full assembly must meet rigorous operational and durability standards to ensure continuous use in rugged environments. The solicitation is classified as a subcontract under NAICS code 333911, associated with the Department of the Interior’s Great Plains Regional Office, with a response deadline of August 10, 2026, at 4:00 p.m. The posting date was July 30, 2026, providing suppliers approximately three weeks to prepare and submit compliant proposals. While no specific set-aside designation or place of performance details are provided, interested parties must ensure their submissions align with the technical specifications and delivery expectations outlined in the solicitation, with all correspondence and proposals directed through the official SAM.gov portal linked in the document.

Great Plains Regional Office

POSTED

DEADLINE

Wastewater Treatment Equipment Supply and InstallationThe contract entails the supply, delivery, and installation of mechanical process equipment for a 0.1 MGD wastewater treatment facility, including aeration systems, clarifiers, pumps, valves, and control panels. The work is classified as a subcontract under NAICS code 333911 and is being procured by the River Valley Regional Commission in Georgia. All equipment must be delivered and installed to meet the operational requirements of the facility, ensuring full compliance with technical and performance standards for wastewater treatment processes. The solicitation was posted on July 28, 2026, with a response deadline of September 3, 2026, at 7:00 PM. The contract does not specify a set-aside type or include details on the point of contact or exact location of performance, but the work is expected to be conducted within Georgia under the oversight of the River Valley Regional Commission. Interested parties must submit proposals by the stated deadline to be considered for award, and the procurement is accessible through the Georgia state procurement portal.

River Valley Regional Commission

POSTED

DEADLINE

in about 1 month

Reciprocating Pump Manufacturing and SupplyThe contract requires the design, fabrication, testing, and delivery of a single reciprocating pump identified by NSN 4320011792488, manufactured to meet all applicable military standards for quality, performance, and durability. The pump must be fully compliant with Defense Department regulations governing packaging, labeling, and shipment procedures to ensure secure and standardized handling throughout the logistics chain. All work must be completed and delivered to the specified location in Williamstown with a zip code of 26187-7952, adhering strictly to the technical and procedural requirements set forth by the Department of Defense through the Maritime Supply Chain agency. The solicitation, posted on July 28, 2026, requires proposals to be submitted by August 10, 2026, and is structured as a subcontract under NAICS code 333911, which classifies it within the pump and pumping equipment manufacturing sector. The contract is part of a broader effort to maintain critical military equipment readiness and relies on precise execution to meet operational needs.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Fuel Metering Pump (NSN 2910016915517)The contract requires the procurement and delivery of two commercial fuel metering pumps identified by NSN 2910016915517, fully compliant with DLA technical specifications, with all units due for delivery no later than July 28, 2026. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and it falls under NAICS code 333911 for engine, turbine, and power transmission equipment manufacturing. The performance location is designated as Fort Eustis, Virginia, with a response deadline of August 10, 2026, and the opportunity was posted on July 28, 2026, through the DLA’s DIBBS platform. The contracting activity is managed under the Land Supply Chain within the Department of Defense.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Sewage Pumping UnitsThe contract calls for the procurement and delivery of three sewage pumping units that must fully comply with military specifications, National Stock Number requirements, and approved packaging standards to ensure interoperability and logistical readiness within defense operations. These units are intended for use in a military context where reliability, durability, and adherence to federal technical guidelines are critical for field performance and maintenance. The procurement is classified as a subcontract under NAICS code 333911, indicating it falls within the Pump and Pumping Equipment Manufacturing sector, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The opportunity was posted on July 28, 2026, with a response deadline of August 10, 2026, and performance is to be carried out at Colts Neck, New Jersey, with a zip code of 07722-5001. The contract does not specify a set-aside designation, meaning it is open to all eligible contractors without preference given to small, veteran-owned, or other specialized business categories. While no point of contact is listed, all communications and submissions must be directed through the DIBBS platform via the provided UI link, ensuring transparency and centralized handling of the procurement process.

Defense Logistics Agency

POSTED

DEADLINE

Rotary Pump Supply – Mechanical Component DeliveryTwo rotary pumps, identified by NSN 4320-01-528-3382, are to be supplied and delivered to USNS CESAR CHAVEZ T-AKE 14 at FPO AP 96662, with full compliance to applicable military specifications. The delivery must be completed within twenty days of contract award, ensuring timely operational readiness for the vessel. The contract falls under the NAICS code 333911 and is classified as a subcontract, issued by the Department of Defense through the Maritime Supply Chain organization. The solicitation opened on July 28, 2026, with responses required by August 10, 2026, and the place of performance is designated as FPO with ZIP code 96662, indicating delivery to a U.S. military vessel stationed at a naval facility.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Centrifugal Pump Unit SupplyThe contract entails the supply of three defense-compliant centrifugal pump units identified by NSN 4320-01-738-3994 and part number 3999513, with strict adherence to military specifications. Delivery must occur FOB origin within a 214-day window following contract award, and no variance in quantity is permitted—the exact number of units must be fulfilled without adjustment. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the Small Business Administration, with the NAICS code 333911 indicating classification in pump and pumping equipment manufacturing. Performance will be executed out of New Cumberland, Pennsylvania, zip code 17070-5002, though the origin point for shipment is undefined in the provided data. The opportunity was posted on July 28, 2026, with offers due by August 10, 2026, under the purview of the Department of Defense’s Maritime Supply Chain organization.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Automated Headworks Screening System InstallationThe City of Point Arena has issued a subcontract for the supply and installation of an automated headworks screening system at its wastewater treatment facility. This project is designed to enhance the initial solids removal process by deploying a modern, automated system that improves efficiency, reduces manual labor, and minimizes operational disruptions at the facility’s intake point. The work is classified under NAICS code 333911, indicating it involves the manufacture of industrial machinery specifically for wastewater treatment applications. Performance of the contract is centered in Point Arena, California, with the zip code 95468 serving as the designated location for installation and commissioning. The solicitation was posted on July 28, 2026, and while the specific subcontractor has not been identified, the project is structured as a downstream contractual arrangement under a broader municipal infrastructure initiative. The contract does not specify a set-aside type, suggesting it is open to general competition without restrictions based on business size or socioeconomic status. The official project reference is available through the California Environmental Quality Act network via the provided link.

City of Point Arena

POSTED

DEADLINE

Reciprocating Pump Supply (NSN: 4320013453940)The contract is for the supply of ten reciprocating pumps identified by NSN 4320013453940, requiring full compliance with military and federal technical specifications, including stringent packaging and labeling standards to meet defense logistics requirements. The pumps must be delivered to the designated place of performance in Jacksonville, Florida, with a zip code of 32212-0103, and the work falls under the NAICS code 333911, categorizing it as pump and pumping equipment manufacturing. This is classified as a subcontract with no set-aside designation, and the solicitation is managed by the Maritime Supply Chain under the Department of Defense. The posting date is July 27, 2026, and all responses are due by August 7, 2026, with the opportunity accessible via the DIBBS platform for qualified subcontractors to submit proposals.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Agriculture → USDA Forest Service

Same awarding agency

Electrical System Documentation and Load AnalysisThe contract requires the performance and detailed documentation of electrical load analysis for fire apparatus to verify system stability under full operational load conditions. This work is essential to ensure that all electrical components function reliably during emergency operations, accounting for peak power demands without risk of failure. The analysis must be thorough, accurately recorded, and aligned with industry standards for electrical systems in emergency response vehicles. The solicitation is categorized as a subcontract under NAICS code 541330, indicating it falls within engineering services, and is issued by the USDA Forest Service under the Department of Agriculture. The response deadline is August 19, 2026, with the opportunity posted on July 30, 2026. Place of performance is specified with a ZIP code of 80742, though no additional geographic details are provided. There is no set-aside designation, and no point of contact information is listed in the contract data.

Engineering Services

POSTED

DEADLINE

DOT-Compliant Conspicuity Tape ApplicationThe contract requires the application of 2-inch wide, alternating red and white DOT-approved conspicuity tape to the rear step of a fire apparatus, ensuring compliance with federal safety standards for visibility. The work must be performed to meet Department of Transportation requirements, emphasizing precision in material placement and adherence to the specified color pattern. This subcontract is issued by the USDA Forest Service under the NAICS code 238990, which pertains to other specialty trade contractors, and is tied to a specific location identified by the ZIP code 80742. The opportunity was posted on July 30, 2026, with a firm deadline for responses set for August 19, 2026, at 6:00 p.m. The contract does not specify a set-aside designation, and no point of contact information is provided, though interested parties can access further details via the SAM.gov link associated with the solicitation.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Final Stage Vehicle Certification and Compliance LabelingThe contract requires final stage manufacturer certification and the installation of a compliance label in the driver’s door jamb in accordance with Federal Motor Vehicle Safety Standards and U.S. Forest Service requirements. This work is essential to ensure the vehicle meets all federal safety regulations prior to delivery and operation. The certification must be performed by a certified final stage manufacturer with the proper authority to affix the compliance label at the designated location, verifying that the vehicle composition and modifications comply with applicable FMVSS standards. This is a subcontract opportunity posted by the USDA Forest Service under the NAICS code 336211, which corresponds to motor vehicle manufacturing. The response deadline is August 19, 2026, and the place of performance is listed as 80742. While specific details about the vehicle type or modification scope are not provided, the requirement is focused strictly on the final certification and labeling process. Contractors must be qualified to perform this specialized compliance task under federal motor vehicle safety regulations and be prepared to demonstrate adherence to the prescribed standards at the specified work location.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

Corrosion-Resistant Identification and LabelingThe contract seeks qualified vendors to supply and install durable, corrosion-resistant labels for critical applications including pump test results, fluid types, safety warnings, and vehicle specifications. These labels must withstand harsh environmental conditions, ensuring legibility and longevity in outdoor or industrial settings. The work is governed under NAICS code 339950, indicating a focus on miscellaneous manufacturing, and is structured as a subcontract under the USDA Forest Service. Performance is required at a location associated with the zip code 80742, though the specific city or state is not detailed in the data. The solicitation was posted on July 30, 2026, with responses due by August 19, 2026, offering a limited window for qualified providers to submit proposals. There is no set-aside designation specified, and the contract does not identify a point of contact, suggesting vendors should rely on the provided SAM.gov link for additional submission details and requirements.

Sign Manufacturing

POSTED

DEADLINE

Pump Operator’s Panel Design and InstallationThe contract calls for the design, build, and installation of a fully functional pump operator’s panel tailored for fire apparatus operations, including integrated gauges, controls, and clear labeling to ensure safe and efficient use during emergency responses. The scope requires adherence to industry standards for durability, readability, and operational reliability under high-stress conditions, with all components fabricated and assembled to meet the specific demands of fire suppression systems. The panel must be engineered for seamless integration into existing fire apparatus designs and must withstand environmental extremes common in wildland and structural firefighting scenarios. The solicitation is issued as a subcontract under NAICS code 334510, targeting manufacturers or builders specializing in fire equipment instrumentation, with responses due by August 19, 2026. The work is to be performed at a location identified by the zip code 80742, though the precise city and state are not specified. The contracting agency is the USDA Forest Service, operating under the Department of Agriculture, indicating this panel will support wildland firefighting efforts. Interested parties must submit proposals by the deadline without the benefit of a set-aside program, and all submissions must demonstrate technical capability, quality assurance processes, and prior experience in delivering similar firefighter control systems.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Stainless Steel Plumbing System InstallationThe contract entails the fabrication and installation of a stainless steel plumbing system using Victaulic couplings specifically for the fire apparatus hydraulic system, ensuring durability and compatibility under high-pressure conditions. The work is classified under NAICS code 238220 for plumbing, heating, and air-conditioning contractors, indicating specialized technical expertise is required for proper execution. The project is solicited as a subcontract by the USDA Forest Service under the Department of Agriculture, with performance obligated at a location identified by the ZIP code 80742. All work must be completed in accordance with technical specifications for stainless steel systems and Victaulic coupling standards to ensure operational safety and reliability in emergency response equipment. The opportunity was posted on July 30, 2026, and responses are due by August 19, 2026, at 6:00 p.m. The solicitation is accessible through the SAM.gov portal, and while no set-aside status or point of contact is specified, interested parties are expected to meet all contractual and regulatory requirements for federal subcontracting. The absence of detailed agency office or contact information suggests that all communications and submissions must be handled through the official SAM.gov platform.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Polypropylene Water Tank FabricationThe contract calls for the fabrication and installation of a polypropylene water tank featuring nitrogen-welded seams to ensure superior corrosion resistance and structural integrity, meeting rigorous performance standards for long-term durability in demanding environments. The work is classified under NAICS code 326199 and is being procured as a subcontract by the USDA Forest Service under the Department of Agriculture, with performance required at a location identified by the ZIP code 80742. The solicitation was posted on July 30, 2026, and responses must be submitted no later than August 19, 2026, by 6:00 p.m. The technical specifications emphasize the use of polypropylene material and nitrogen welding as critical to achieving the required service life and resistance to environmental degradation, with no set-aside provisions specified. All work must comply with applicable industry and federal standards for water storage infrastructure, and the contractor is expected to manage all aspects of manufacturing, delivery, and on-site installation.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

2026 TACTICAL WATER TENDERS

Solicitation # 12318726Q0198

The U.S. Forest Service is seeking proposals for three Tactical Water Tenders configured as body-only units to be mounted on government-furnished 4x2 cab and chassis. The vendor must handle all necessary chassis modifications and preparations, install a 1,500-gallon water tank, a fire pump, warning lights, a designated graphics package, and all other components required to create fully operational units compliant with USFS national standards and NFPA 1900 specifications. Each tender must be delivered complete and ready for service, including on-site familiarization training for personnel. The solicitation, identified as 12318726Q0198, is open for responses until August 19, 2026, and falls under NAICS code 336211 for motor vehicle body manufacturing and PSC 4210 for fire fighting equipment. Proposals must demonstrate proven capability to meet the rigorous technical and operational demands of the USFS fleet requirements. All work is to be performed in coordination with the Washington Office, with delivery and performance based in Washington, D.C. Primary contact for inquiries is Kimberly Turner, with Cassandra Carey available for additional support.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

TYPE 3 FIRE ENGINES

Solicitation # 12318726Q0196

The U.S. Forest Service is seeking proposals for the delivery of sixteen Type 3 fire engines in body-only configuration to be installed on government-furnished 4x2 and 4x4 chassis. The vendor is responsible for all chassis modifications, installation of the fire body, a 600-gallon water tank, a fire pump, warning lights, a required graphics package, and all other components necessary to complete fully operational units. The apparatus must comply with U.S. Forest Service national standards and NFPA 1900 unless otherwise specified. Each proposal must include delivery of all units to the designated location and on-site familiarization training for personnel. The solicitation number is 12318726Q0196, with responses due by August 19, 2026. The contract is classified under NAICS code 336211 for motor vehicle body manufacturing and PSC 4210 for fire fighting equipment. The contracting office is located in Washington D.C., with primary point of contact Kimberly Turner and secondary contact Cassandra Carey.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

GAOA South Park Office Rehab Pike National Forest

Solicitation # 1240BH26Q0028

The USDA Forest Service, through its South Park Ranger District, is soliciting quotes for the GAOA South Park Office Rehab project located at 320 US Hwy 285 in Fairplay, Colorado, within the Pike National Forest at an elevation of approximately 9,953 feet. This acquisition, identified as solicitation 1240BH26Q0028, is a Total Small Business Set-Aside under FAR 19.5 using NAICS code 236220, with a small business size standard of $45 million. The contract requires the selected contractor to furnish all labor, materials, equipment, and services for comprehensive rehabilitation work, including removal and installation of a new standing seam metal roof with all associated components such as underlayment, flashing, gutters, and downspouts; installation of an electrical ice and snow melt system on the roof, valleys, gutters, and downspouts; interior upgrades involving replacement of carpet with carpet tiles, acoustical ceiling panels, and ceiling tiles; sealing of windows; installation of new insulation in dropped ceiling areas; addition of communication outlets and telecom electrical circuits; and construction of a chain link fence with personnel and motorized gates including associated electrical and safety systems. All work must comply with approved drawings, specifications, and standards including TIA/EIA-606-A for labeling, ANSI A13.1 for color coding, and UL 969 for labeling materials. Roofing work is restricted to the months of May through October, with no work permitted on weekends or federal holidays, and building operations must continue uninterrupted. The contractor must begin performance within 10 calendar days of the Notice to Proceed and complete all work within 120 days of NTP or by June 30, 2027, whichever comes first, with performance bound by the 395-day contract duration stated in SF1442. The solicitation mandates submission of four separate PDF documents: a completed and signed SF1442 form with all required blocks filled, a detailed price proposal with offeror details, a technical proposal demonstrating capability to meet all SOW requirements including sequencing of work, resource availability, and subcontractor details, and a bid guarantee in the form of Standard Form 24 and accompanying Power of Attorney. Offerors must maintain an active SAM.gov registration. Technical proposals must address how all scope elements will be fulfilled, identify subcontractors with their experience, and detail work

Commercial and Institutional Building Construction

POSTED

DEADLINE

Type 6 Fire Engines-Model 683U- Body Only

Solicitation # 123187260Q192

The US Forest Service is seeking to award a Firm Fixed Price contract for thirty-three Model 638U Type 6 fire apparatus, compliant with national specifications issued in March 2026, under a 100% Small Business Set-aside. The contract will cover not just the delivery of the fire engines equipped with 4x4 chassis but also include operational training and transportation to designated locations across Arizona, Arkansas, Colorado, Florida, Idaho, Montana, North Carolina, New Mexico, Oregon, Washington, and Wyoming. The acquisition will follow FAR Subpart 12.1 for commercial products and services, supported by simplified acquisition procedures, ensuring a streamlined procurement process. All vehicles must meet USDA Forest Service standards and are required to be delivered no later than December 31, 2028. The solicitation number is 12318726Q0192, with a response deadline of August 6, 2026, and the pre-solicitation was posted on July 28, 2026. The NAICS code for this procurement is 336211, focusing on motor vehicle body manufacturing, and the product classification is 4210 for fire fighting equipment. The contracting office is the USFS Washington Office in Washington, DC, with primary point of contact Kimberly Turner and secondary contact Cassandra Carey available for inquiries. The contract will not include a body-only procurement despite an outdated title reference; the full integrated units as specified in the Model 638U standard are required.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

HDPE and PVC Pipe SupplyThe contract solicits the supply of 4-inch HDPE and PVC pipe compliant with ASTM specifications, requiring full adherence to defined manufacturer standards, including specific size, diameter ratio, pressure class, and marking every five feet for traceability and quality assurance. All materials must meet established industry benchmarks to ensure durability and performance under required conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 423720 indicating wholesale trade of construction materials. The place of performance is located in Fifty Six, Arkansas, with the USDA Forest Service, under the Department of Agriculture, as the procuring agency. The solicitation was posted on July 27, 2026, and responses must be submitted by August 25, 2026, at 9:00 PM Eastern Time.

Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers

POSTED

DEADLINE