Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical System Documentation and Load Analysis

Active

Federal

Response Deadline08/19/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance and detailed documentation of electrical load analysis for fire apparatus to verify system stability under full operational load conditions. This work is essential to ensure that all electrical components function reliably during emergency operations, accounting for peak power demands without risk of failure. The analysis must be thorough, accurately recorded, and aligned with industry standards for electrical systems in emergency response vehicles. The solicitation is categorized as a subcontract under NAICS code 541330, indicating it falls within engineering services, and is issued by the USDA Forest Service under the Department of Agriculture. The response deadline is August 19, 2026, with the opportunity posted on July 30, 2026. Place of performance is specified with a ZIP code of 80742, though no additional geographic details are provided. There is no set-aside designation, and no point of contact information is listed in the contract data.

General Info

Electrical load analysis for fire apparatus due August 19, 2026, under USDA Forest Service subcontract.

Agency

Department Of Agriculture → USDA Forest ServiceView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

80742, DC, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 06:00:00 PM UTCin 19 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → USDA Forest Service

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → USDA Forest Service

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform and document electrical load analysis to ensure stability under full operational load on the fire apparatus.

Similar Contracts

Same NAICS industry code

Quality Assurance and Inspection Services (Sub-tier Support)The contract entails providing independent quality assurance and inspection services as a sub-tier support to ensure compliance with DLA and MIL-STD standards across multiple stages of manufacturing and delivery. Key responsibilities include conducting first article inspections to validate initial production samples, performing in-process checks to maintain consistent quality during production, and executing final acceptance testing to confirm that end products meet all technical and performance specifications. Additionally, the contractor is required to review all associated documentation for accuracy and completeness and to systematically track, report, and manage non-conformances to ensure timely resolution and prevent recurrence. The work must be executed with precision and adherence to federal defense procurement standards, ensuring that all deliverables are traceable, auditable, and fully compliant with applicable military specifications. This subcontract is issued under NAICS code 541330 and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026. Although specific location details and point of contact information are not provided, performance is expected to align with the needs of the defense supply chain, likely involving coordination with prime contractors and defense manufacturing facilities. Participation requires demonstrated expertise in military quality systems and the ability to operate independently within a highly regulated environment, ensuring that all inspection and assurance activities support mission-critical defense outcomes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Government First Article Testing (FAT) SupportThis contract supports Government-conducted Factory Acceptance Testing for up to two units, requiring the contractor to ensure full site access, provide comprehensive documentation, and deliver test-ready units ready for evaluation. The effort is tied to the Government’s First Article Testing process and demands coordination to meet all technical and procedural requirements necessary for successful FAT execution. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. The North American Industry Classification System code 541330 designates the scope as engineering services, aligning with technical support and testing services for defense-related systems. The contract was posted on July 31, 2026, with a response deadline of August 28, 2026, and is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, indicating potential flexibility or site-specific arrangements to be determined post-award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks third-party quality assurance support to ensure full compliance with ISO 9001:2015 standards, MIL-STD-1916 sampling procedures, and zero-defect acceptance criteria specifically for government inspection readiness. The service provider will be responsible for implementing and verifying quality control processes that align with these rigorous standards to prepare for and pass formal military and government inspections. Attention must be paid to systematic documentation, traceability, and defect prevention across all stages of production or service delivery to meet the zero-defect mandate. This is a subcontract under the NAICS code 541330, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026. The place of performance and specific location details are not provided, indicating flexibility in where services may be rendered as long as compliance requirements are met. Proposals must demonstrate proven experience in supporting defense-related quality systems, with clear methodologies for auditing, sampling, and defect resolution that align with federal inspection protocols. All activities must be designed to ensure uninterrupted readiness for government evaluation at any time.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 21 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 21 hours ago

DEADLINE

Transportation Planning and Mobility Analysis

City of Powder Springs

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Architectural & Engineering Services

Solicitation # RFP-125390

The Virginia Housing Development Authority is soliciting proposals for Architectural and Engineering Services under solicitation number RFP-125390, with a response deadline of September 28, 2026. The contract is targeted at SLED entities and will be performed at 601 S. Belvidere St., Richmond, VA 23229, where all project activities and deliverables must be completed. Interested parties must submit their responses by the stated deadline to be considered for award. The contract does not specify a NAICS code or set-aside type, indicating it is open to general competition without preference for small, minority-owned, or other specialized business categories. Cheryl Price is the designated point of contact for inquiries and can be reached via email at cheryl.price@virginiahousing.com or by phone at 804-343-5723. Further details, including evaluation criteria and technical requirements, are available through the vendor portal link provided.

Virginia Housing Development Authority

POSTED

DEADLINE

in about 2 months

Final Design & Construction DrawingsThe contract titled Final Design & Construction Drawings seeks a subcontractor to develop complete construction documents for housing or public works projects, encompassing civil, structural, and utility plans necessary for project execution. The work requires detailed engineering deliverables that align with local and state standards and is anticipated to support infrastructure development under the jurisdiction of the City of Griffin in Georgia. The solicitation was posted on July 30, 2026, with a deadline of September 4, 2026, for responses, leaving approximately six weeks for qualified parties to prepare and submit proposals. The North American Industry Classification System code 541330 identifies this as an architectural and engineering services contract, indicating the need for professional expertise in design and technical documentation. While no set-aside preferences or agency contact details are specified, interested parties must respond through the official state procurement portal linked in the solicitation. Performance location is not detailed beyond the state of Georgia, implying potential project sites may vary within the city's jurisdiction.

City of Griffin

POSTED

DEADLINE

in about 1 month

Preliminary Engineering Report (PER) DevelopmentThe contract seeks the development of a Preliminary Engineering Report for federally funded infrastructure or housing projects, requiring a detailed feasibility analysis, accurate cost estimates, and viable design concepts. The work must align with federal funding guidelines and deliver comprehensive technical documentation to support project approval and future planning phases. The submission is structured as a subcontract under NAICS code 541330, indicating specialized engineering services are expected from qualified firms with expertise in civil or infrastructure engineering. The opportunity is issued by the City of Griffin in Georgia with a response deadline of September 4, 2026, and was posted on July 30, 2026. There is no specified set-aside type, meaning the contract is open to all eligible subcontractors without demographic or size-based restrictions. Performance location details are not provided, suggesting the work may be conducted remotely or across multiple sites under the jurisdiction of the agency. All submissions must be completed and delivered by the stated deadline, and the official portal for further information is accessible through the provided link.

City of Griffin

POSTED

DEADLINE

in about 1 month

27-002- GRANT WRITING/ADMINISTRATIVE & RELATED GRANT SERVICES

Solicitation # PE-72650-NONST-2027-000000044

The City of Griffin, Georgia is soliciting qualified engineering firms to provide comprehensive services for federally assisted projects, including the preparation of a Preliminary Engineering Report, final design, and construction administration. Firms must demonstrate a proven track record in supporting local governments through all phases of federally funded initiatives, ensuring compliance with federal requirements and efficient project delivery. The scope requires technical expertise in navigational federal grant frameworks and the ability to manage complex engineering tasks from concept through to construction oversight. Proposals must be submitted by September 4, 2026, and should be directed to Suzanne Partin at the City of Griffin, with inquiries handled via email at lpartin@cityofgriffin.com or phone at 470-497-3452. This solicitation, identified by PE-72650-NONST-2027-000000044, is categorized under grant writing and administrative services and is open to firms capable of delivering full-cycle engineering support for projects funded through federal dollars. All work is expected to be performed within the state of Georgia, and firms are expected to align their capabilities with the city’s objectives for infrastructure development and federal funding utilization.

City of Griffin

POSTED

DEADLINE

in about 1 month

RFP for General Engineering Services

Solicitation # 430-13488

Grant County PUD is soliciting proposals for General Engineering Services under RFP number 430-13488, with an estimated contract value of $12 million. The opportunity is open for bidding with a submission deadline of September 2, 2026, at 4:00 PM Pacific Time, and was posted on July 30, 2026. Bidders must register and log in to access detailed bid information and submit proposals, as this is a proposal-based procurement process conducted offline. The contract is not subject to any specific set-aside classifications, and the work will be performed within the state of Washington. Primary contact for inquiries is Tom Hammond, Procurement Officer, reachable at thammond1@gcpud.org, with additional support available from Rebecca Diaz, Procurement Officer, at rdiaz@gcpud.org. The estimated value is preliminary and subject to change upon final contract determination.

Grant County PUD

POSTED

DEADLINE

in about 1 month

Term Engineering Services

Solicitation # RFP-125328

Alleghany County in Virginia is seeking qualified engineering service providers through a term contract solicitation titled Term Engineering Services with solicitation number RFP-125328. The solicitation was posted on July 30, 2026, and responses are due by September 10, 2026, at 7:00 p.m. This contract is intended to establish a framework for securing professional engineering services across a range of projects within the county over a defined period. The services will be performed in Alleghany County, Virginia, and the county is not specifying a set-aside type or NAICS code at this time. Interested vendors should direct all inquiries to Beverley Bowers, the designated point of contact, via email at bbowers@co.alleghany.va.us or by phone at 540-863-6650. Further details and submission guidelines are available through the vendor portal at the provided UI link.

Alleghany County

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Agriculture → USDA Forest Service

Same awarding agency

DOT-Compliant Conspicuity Tape ApplicationThe contract requires the application of 2-inch wide, alternating red and white DOT-approved conspicuity tape to the rear step of a fire apparatus, ensuring compliance with federal safety standards for visibility. The work must be performed to meet Department of Transportation requirements, emphasizing precision in material placement and adherence to the specified color pattern. This subcontract is issued by the USDA Forest Service under the NAICS code 238990, which pertains to other specialty trade contractors, and is tied to a specific location identified by the ZIP code 80742. The opportunity was posted on July 30, 2026, with a firm deadline for responses set for August 19, 2026, at 6:00 p.m. The contract does not specify a set-aside designation, and no point of contact information is provided, though interested parties can access further details via the SAM.gov link associated with the solicitation.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Final Stage Vehicle Certification and Compliance LabelingThe contract requires final stage manufacturer certification and the installation of a compliance label in the driver’s door jamb in accordance with Federal Motor Vehicle Safety Standards and U.S. Forest Service requirements. This work is essential to ensure the vehicle meets all federal safety regulations prior to delivery and operation. The certification must be performed by a certified final stage manufacturer with the proper authority to affix the compliance label at the designated location, verifying that the vehicle composition and modifications comply with applicable FMVSS standards. This is a subcontract opportunity posted by the USDA Forest Service under the NAICS code 336211, which corresponds to motor vehicle manufacturing. The response deadline is August 19, 2026, and the place of performance is listed as 80742. While specific details about the vehicle type or modification scope are not provided, the requirement is focused strictly on the final certification and labeling process. Contractors must be qualified to perform this specialized compliance task under federal motor vehicle safety regulations and be prepared to demonstrate adherence to the prescribed standards at the specified work location.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

Corrosion-Resistant Identification and LabelingThe contract seeks qualified vendors to supply and install durable, corrosion-resistant labels for critical applications including pump test results, fluid types, safety warnings, and vehicle specifications. These labels must withstand harsh environmental conditions, ensuring legibility and longevity in outdoor or industrial settings. The work is governed under NAICS code 339950, indicating a focus on miscellaneous manufacturing, and is structured as a subcontract under the USDA Forest Service. Performance is required at a location associated with the zip code 80742, though the specific city or state is not detailed in the data. The solicitation was posted on July 30, 2026, with responses due by August 19, 2026, offering a limited window for qualified providers to submit proposals. There is no set-aside designation specified, and the contract does not identify a point of contact, suggesting vendors should rely on the provided SAM.gov link for additional submission details and requirements.

Sign Manufacturing

POSTED

DEADLINE

Pump Operator’s Panel Design and InstallationThe contract calls for the design, build, and installation of a fully functional pump operator’s panel tailored for fire apparatus operations, including integrated gauges, controls, and clear labeling to ensure safe and efficient use during emergency responses. The scope requires adherence to industry standards for durability, readability, and operational reliability under high-stress conditions, with all components fabricated and assembled to meet the specific demands of fire suppression systems. The panel must be engineered for seamless integration into existing fire apparatus designs and must withstand environmental extremes common in wildland and structural firefighting scenarios. The solicitation is issued as a subcontract under NAICS code 334510, targeting manufacturers or builders specializing in fire equipment instrumentation, with responses due by August 19, 2026. The work is to be performed at a location identified by the zip code 80742, though the precise city and state are not specified. The contracting agency is the USDA Forest Service, operating under the Department of Agriculture, indicating this panel will support wildland firefighting efforts. Interested parties must submit proposals by the deadline without the benefit of a set-aside program, and all submissions must demonstrate technical capability, quality assurance processes, and prior experience in delivering similar firefighter control systems.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Stainless Steel Plumbing System InstallationThe contract entails the fabrication and installation of a stainless steel plumbing system using Victaulic couplings specifically for the fire apparatus hydraulic system, ensuring durability and compatibility under high-pressure conditions. The work is classified under NAICS code 238220 for plumbing, heating, and air-conditioning contractors, indicating specialized technical expertise is required for proper execution. The project is solicited as a subcontract by the USDA Forest Service under the Department of Agriculture, with performance obligated at a location identified by the ZIP code 80742. All work must be completed in accordance with technical specifications for stainless steel systems and Victaulic coupling standards to ensure operational safety and reliability in emergency response equipment. The opportunity was posted on July 30, 2026, and responses are due by August 19, 2026, at 6:00 p.m. The solicitation is accessible through the SAM.gov portal, and while no set-aside status or point of contact is specified, interested parties are expected to meet all contractual and regulatory requirements for federal subcontracting. The absence of detailed agency office or contact information suggests that all communications and submissions must be handled through the official SAM.gov platform.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Polypropylene Water Tank FabricationThe contract calls for the fabrication and installation of a polypropylene water tank featuring nitrogen-welded seams to ensure superior corrosion resistance and structural integrity, meeting rigorous performance standards for long-term durability in demanding environments. The work is classified under NAICS code 326199 and is being procured as a subcontract by the USDA Forest Service under the Department of Agriculture, with performance required at a location identified by the ZIP code 80742. The solicitation was posted on July 30, 2026, and responses must be submitted no later than August 19, 2026, by 6:00 p.m. The technical specifications emphasize the use of polypropylene material and nitrogen welding as critical to achieving the required service life and resistance to environmental degradation, with no set-aside provisions specified. All work must comply with applicable industry and federal standards for water storage infrastructure, and the contractor is expected to manage all aspects of manufacturing, delivery, and on-site installation.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Fire Pump System IntegrationThe contract involves the supply, certification, and integration of a fire pump system including the installation of controls on the operator’s panel and comprehensive performance testing to ensure full operational compliance. The work is scoped under NAICS code 333911, indicating specialized machinery manufacturing for fire protection systems, and is structured as a subcontract to support the USDA Forest Service’s infrastructure needs. The system must meet stringent performance standards, with certification and testing protocols required to validate reliability under emergency conditions, and the controls integration must allow for seamless monitoring and operation via the designated operator panel. Performance is anticipated at the location identified by ZIP code 80742, though specific city or state details are not provided in the data. The opportunity was posted on July 30, 2026, with a response deadline of August 19, 2026, giving potential vendors approximately three weeks to prepare and submit proposals. While no set-aside classification or point of contact is listed, the solicitation is accessible through the SAM.gov portal, and bidders are expected to fully comply with federal procurement requirements governing subcontracted technical services for federal land management agencies.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

2026 TACTICAL WATER TENDERS

Solicitation # 12318726Q0198

The U.S. Forest Service is seeking proposals for three Tactical Water Tenders configured as body-only units to be mounted on government-furnished 4x2 cab and chassis. The vendor must handle all necessary chassis modifications and preparations, install a 1,500-gallon water tank, a fire pump, warning lights, a designated graphics package, and all other components required to create fully operational units compliant with USFS national standards and NFPA 1900 specifications. Each tender must be delivered complete and ready for service, including on-site familiarization training for personnel. The solicitation, identified as 12318726Q0198, is open for responses until August 19, 2026, and falls under NAICS code 336211 for motor vehicle body manufacturing and PSC 4210 for fire fighting equipment. Proposals must demonstrate proven capability to meet the rigorous technical and operational demands of the USFS fleet requirements. All work is to be performed in coordination with the Washington Office, with delivery and performance based in Washington, D.C. Primary contact for inquiries is Kimberly Turner, with Cassandra Carey available for additional support.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

TYPE 3 FIRE ENGINES

Solicitation # 12318726Q0196

The U.S. Forest Service is seeking proposals for the delivery of sixteen Type 3 fire engines in body-only configuration to be installed on government-furnished 4x2 and 4x4 chassis. The vendor is responsible for all chassis modifications, installation of the fire body, a 600-gallon water tank, a fire pump, warning lights, a required graphics package, and all other components necessary to complete fully operational units. The apparatus must comply with U.S. Forest Service national standards and NFPA 1900 unless otherwise specified. Each proposal must include delivery of all units to the designated location and on-site familiarization training for personnel. The solicitation number is 12318726Q0196, with responses due by August 19, 2026. The contract is classified under NAICS code 336211 for motor vehicle body manufacturing and PSC 4210 for fire fighting equipment. The contracting office is located in Washington D.C., with primary point of contact Kimberly Turner and secondary contact Cassandra Carey.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

GAOA South Park Office Rehab Pike National Forest

Solicitation # 1240BH26Q0028

The USDA Forest Service, through its South Park Ranger District, is soliciting quotes for the GAOA South Park Office Rehab project located at 320 US Hwy 285 in Fairplay, Colorado, within the Pike National Forest at an elevation of approximately 9,953 feet. This acquisition, identified as solicitation 1240BH26Q0028, is a Total Small Business Set-Aside under FAR 19.5 using NAICS code 236220, with a small business size standard of $45 million. The contract requires the selected contractor to furnish all labor, materials, equipment, and services for comprehensive rehabilitation work, including removal and installation of a new standing seam metal roof with all associated components such as underlayment, flashing, gutters, and downspouts; installation of an electrical ice and snow melt system on the roof, valleys, gutters, and downspouts; interior upgrades involving replacement of carpet with carpet tiles, acoustical ceiling panels, and ceiling tiles; sealing of windows; installation of new insulation in dropped ceiling areas; addition of communication outlets and telecom electrical circuits; and construction of a chain link fence with personnel and motorized gates including associated electrical and safety systems. All work must comply with approved drawings, specifications, and standards including TIA/EIA-606-A for labeling, ANSI A13.1 for color coding, and UL 969 for labeling materials. Roofing work is restricted to the months of May through October, with no work permitted on weekends or federal holidays, and building operations must continue uninterrupted. The contractor must begin performance within 10 calendar days of the Notice to Proceed and complete all work within 120 days of NTP or by June 30, 2027, whichever comes first, with performance bound by the 395-day contract duration stated in SF1442. The solicitation mandates submission of four separate PDF documents: a completed and signed SF1442 form with all required blocks filled, a detailed price proposal with offeror details, a technical proposal demonstrating capability to meet all SOW requirements including sequencing of work, resource availability, and subcontractor details, and a bid guarantee in the form of Standard Form 24 and accompanying Power of Attorney. Offerors must maintain an active SAM.gov registration. Technical proposals must address how all scope elements will be fulfilled, identify subcontractors with their experience, and detail work

Commercial and Institutional Building Construction

POSTED

DEADLINE

Type 6 Fire Engines-Model 683U- Body Only

Solicitation # 123187260Q192

The US Forest Service is seeking to award a Firm Fixed Price contract for thirty-three Model 638U Type 6 fire apparatus, compliant with national specifications issued in March 2026, under a 100% Small Business Set-aside. The contract will cover not just the delivery of the fire engines equipped with 4x4 chassis but also include operational training and transportation to designated locations across Arizona, Arkansas, Colorado, Florida, Idaho, Montana, North Carolina, New Mexico, Oregon, Washington, and Wyoming. The acquisition will follow FAR Subpart 12.1 for commercial products and services, supported by simplified acquisition procedures, ensuring a streamlined procurement process. All vehicles must meet USDA Forest Service standards and are required to be delivered no later than December 31, 2028. The solicitation number is 12318726Q0192, with a response deadline of August 6, 2026, and the pre-solicitation was posted on July 28, 2026. The NAICS code for this procurement is 336211, focusing on motor vehicle body manufacturing, and the product classification is 4210 for fire fighting equipment. The contracting office is the USFS Washington Office in Washington, DC, with primary point of contact Kimberly Turner and secondary contact Cassandra Carey available for inquiries. The contract will not include a body-only procurement despite an outdated title reference; the full integrated units as specified in the Model 638U standard are required.

Motor Vehicle Body Manufacturing

POSTED

DEADLINE

HDPE and PVC Pipe SupplyThe contract solicits the supply of 4-inch HDPE and PVC pipe compliant with ASTM specifications, requiring full adherence to defined manufacturer standards, including specific size, diameter ratio, pressure class, and marking every five feet for traceability and quality assurance. All materials must meet established industry benchmarks to ensure durability and performance under required conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 423720 indicating wholesale trade of construction materials. The place of performance is located in Fifty Six, Arkansas, with the USDA Forest Service, under the Department of Agriculture, as the procuring agency. The solicitation was posted on July 27, 2026, and responses must be submitted by August 25, 2026, at 9:00 PM Eastern Time.

Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers

POSTED

DEADLINE