Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

CGC OAK WATER TIGHT DOORS, HATCHES, SCUTTLES RENEWAL

Active
70Z08526Q0027652Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The United States Coast Guard Deputy Commandant for Systems, acting for the Surface Forces Logistics Center, is soliciting a firm-fixed-price service contract for the fabrication of watertight and non-watertight doors, hatches, and scuttles for the CGC OAK. All work must be performed on-site at the vessel's homeport in Newport, Rhode Island. This acquisition is a 100 percent total small business set-aside under NAICS code 332321 for metal door manufacturing, with a corresponding product service code of 2040 for marine hardware and hull items. The government will award the contract to the responsible offeror providing the lowest evaluated price among those who pass the technical capability and past performance evaluations. Technical capability is assessed on a pass/fail basis based on the offeror's understanding of the work statement and adherence to specifications. Past performance is evaluated based on satisfactory completion of similar work within the last three years, though those with no relevant experience will be considered neutral. All quotes must be all-inclusive and submitted electronically to the designated points of contact.

General Info

Small business contract for fabricating doors and hatches for CGC OAK in Newport.

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)View Agency

NAICS

332321 - Metal Window and Door ManufacturingView NAICS

Place of Performance

Newport, RI, 02841, USA

Set-Aside

SBA

Documents

(3)

SOW_OAK+DS+FY27_Doors+Hatches+Scuttle+Fabrication_RHH+25R0.pdf

PDF

FAR Clauses for Services - Fixed-Price SAP Below SAT

PDFclauses-incorporated-by-reference

Wage+and+Determinations+Newport+RI.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)
Contacts2 people available
OfficeALAMEDA, CA, 94501, USA
Organization / Agency
Department Of Homeland Security → Sflc Procurement Branch 2(00085)
View Agency Profile
Office AddressALAMEDA, CA, 94501, USA

Full Description

Show more

Combined Synopsis/Solicitation - 70Z08526Q0027652


The United States Coast Guard Deputy Commandant for Systems (DCS) is issuing this combined synopsis/solicitation on behalf of the Surface Forces Logistics Center (SFLC) to award a firm-fixed-price service contract, as detailed in the attached Statement of Work.


1.1 Intent. This work item describes the requirements for the Contractor to fabricate watertight and non water tight doors, hatches, and scuttles identified in Table 1 in accordance with drawings and references.


Weathertight Door


Watertight Hatch


Watertight Scuttle


SEE SOW


This acquisition is a 100% total small business set-aside under NAICS code 332321 Doors, Metal, Manufacturing, with a corresponding small business size standard of 750 employees. The applicable Product Service Code is 2040 marine hardware and hull items.


All services must be performed on-site at:



CGC OAK


47 Chandler Street


Newport, RI 02841


USA



Period of Performance: 03/24/027 to 02/06/027 at homeport.



The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforming to the solicitation is most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:


• Technical Capability (Pass/Fail)
• Past Performance (Pass/Fail)
• Total Price


A quotation must receive an Acceptable rating for all non-price factors to be eligible for award. Among all acceptable quotations, award will be made to the responsible offeror submitting the lowest evaluated price.


To establish Technical Capability (Pass/Fail), the quotation must demonstrate a clear understanding of the work statement requirements, conform strictly to all specifications in the attached Statement of Work, and provide any adequate capability and corporate experience documentation required by the solicitation. Failure to meet these criteria will render the quotation unacceptable.


The Government will evaluate recent (completed within the last three years) and relevant past performance to assess the likelihood of successful performance. Past performance will be evaluated on an acceptable or unacceptable basis. To receive an acceptable rating, past performance must demonstrate a rating of satisfactory or higher performance of similar work. Offerors without recent or relevant past performance will be assessed as "Neutral" and considered acceptable for award. Past performance demonstrating marginal or below performance is unacceptable.


Offerors shall identify all subcontractors anticipated to perform work under this contract. For each subcontractor, the offeror shall provide the subcontractor’s name, address, point of contact, phone number, the specific work items/specifications they will perform, and the percentage of work they will execute.


Submit offers electronically via email to the points of contact identified in this notice. The Government does not prescribe a specific quotation format. Offerors must submit a quotation that clearly identifies the items offered and demonstrates compliance with the stated requirements. Submissions must be complete, clear, and presented in a format that allows effective evaluation by the Government. Submit all questions via email to the points of contact identified in this notice. The Government will not accept telephone inquiries.


Submit offers on a firm-fixed-price basis. Prices must be all-inclusive and must cover all costs associated with providing the services, including but not limited to labor, materials, equipment, supervision, transportation, and any other costs. The Government may consider offers nonresponsive if they include conditional pricing, price escalation language, or statements indicating that prices are subject to adjustment based on future costs or fees. The Government intends to evaluate offers and make award without discussions; therefore, offerors should submit their best offer with initial submission.


The Statement of Work, market research report, and the list of applicable FAR provisions and clauses are attached to this notice.


Similar Contracts

Same NAICS industry code

NAICS: 332321
New
DIBBS
GUARD, LAMP
Solicitation # SPE8E7-26-T-3534
The contract is for the procurement of seven GUARD, LAMP items identified by NSN 6210-01-702-1246, with delivery required 120 days after order award, targeting a need ship date of July 6, 2026, and a final delivery date of October 17, 2026, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The solicitation, issued under request number SPE8E7-26-T-3534, is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and falls under NAICS code 332321. Technical specifications are defined by multiple drawings, including a basic drawing and referenced revisions, with paint finishing requirements superseded by DCSC Drawing 16236 CS-2300-0001, which specifies Chemical Agent Resistant Coatings (CARC) and high-temperature coatings. Sampling must adhere to MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, respectively, while unspecified attributes are treated as major. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization meeting RP001 requirements. The item is subject to export control under ITAR or EAR, requiring offerors to hold a valid US/Canada Joint Certification Program certification, complete mandatory DLA export control training, and be approved by DLA to access controlled data. Manufacturing using additive technology is prohibited, and failure to submit a Safety Data Sheet prior to award renders an offer ineligible. Quality assurance requires compliance with ISO 9001:2015 or an equivalent standard, and the contractor must maintain an active System for Award Management (SAM) registration, including accurate socioeconomic status representations. The contractor is obligated to use WAWF for electronic invoicing and receiving reports and must comply with DFARS requirements including the Buy American Act, Berry Amendment, prohibition of hexavalent chromium, safeguarding covered defense information under NIST SP 800-171, and restrictions on covered telecommunications equipment. All offerings must be submitted electronically via DIBBS by August 1
DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

NAICS: 334513
New
Federal
CGC MIDGETT SSDG ALIGNMENT TOOLS
Solicitation # 70Z08526Q0027991
The United States Coast Guard Deputy Commandant for Systems, acting on behalf of the Surface Forces Logistics Center, is soliciting a firm-fixed-price contract to procure precision alignment equipment for the CGC MIDGETT SSDG Generator. The requirement specifies a laser shaft alignment system, brand name or equal to Fluke Reliability / PRUFTECHNIK ROTALIGN ELITE (P/N ALI-54.003-OP.NA.ST), including all necessary components, software, and licenses for full operation. Optional items include two tension chains (P/N ALI 2.115) and one compact magnetic bracket set (P/N ALI 2.112). The equipment is to be delivered to the Naval Engineering Mat at USCG Base Honolulu, Hawaii. This acquisition is a 100 percent total small business set-aside under NAICS code 33415. Award will be granted to the responsible offeror providing the lowest evaluated price among those who pass the technical capability and past performance evaluations. Technical capability is assessed on a pass/fail basis based on the offeror's understanding of the work statement and compliance with specifications. Past performance is evaluated over the last three years, with a satisfactory rating or neutral status required for eligibility. All offers must be submitted electronically and must be all-inclusive, as the government intends to make an award without further discussions.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS