This Solicitation opportunity from Department Of Defense was posted on July 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CHANNEL, STRUCTURAL

Closed

SPE8E4-26-T-1915Federal

Submission Closed08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A6-26-U-4155

Solicitation SPE4A6-26-U-4155 is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of machine screws under NSN 5305014496660. This is a total small business set-aside that may result in a unilateral simplified indefinite-delivery contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The initial requirement is for 394 units, with a guaranteed minimum quantity of 39 units and an estimated two orders per year. Approved sources include L3Harris Technologies Integrated and Howmet Global Fastening Systems Inc. The contract is awarded to a responsible offeror based on price evaluation, considering cost estimates, breakdowns, and escalation rates. Deliveries are required within 55 days and are shipped FOB Origin to various CONUS and OCONUS DLA depots. All items must be packaged according to ASTM D3951 and marked per MIL-STD-129, with a strict prohibition on the use of additive manufacturing processes. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination. Quotes must be submitted electronically via DIBBS by September 25, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28WF

Solicitation SPE4A6-26-T-28WF is a fixed-price request for quotations issued by the Department of Defense, specifically the DLA Aviation ASC Commodities Division, for the procurement of machine bolts under NSN 5306007756243. The requirement consists of two line items totaling 25,897 units, with 10,202 units on line 0001 and 15,695 units on line 0002. This procurement is specifically set aside for SBA-certified Women-Owned Small Business (WOSB) concerns. Quotes must be submitted electronically via the DIBBS system by September 18, 2026. The contract specifies a delivery period of 121 days after order, with shipments delivered FOB Origin to DLA Distribution Jacksonville. Quality and technical standards require adherence to current Military Part Standards or consensus non-government standards, with inspection and acceptance occurring at the origin. Key compliance requirements include the Buy American Act, the Berry Amendment, and strict prohibitions against the use of asbestos and mercury in preservation and packaging. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, while invoicing and payment must be processed through the Wide Area WorkFlow (WAWF) system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Machine Bolts (NSN 5306012878627)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Helical Compression Springs (NSN 5360-01-209-0150)

POSTED

DEADLINE

Supply of Machine Bolts (NSN 5306004588650)

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7L1-26-T-11C4

Solicitation SPE7L-26-T-11C4 is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 1,667 helical compression springs, identified by NSN 5360-00-630-2372. The procurement is open for full and open competition, with quotes required via the DIBBS system by September 21, 2026. Delivery is expected within 147 days, with a need ship date of February 16, 2027, and a final delivery destination in Phoenix, Arizona. The contract specifies FOB Origin terms, while inspection and acceptance will occur at the destination. The items must be manufactured according to the current revision of the applicable military or non-government part standard. Quality assurance requires sampling in accordance with MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with a requirement of zero non-conformances for acceptance under MIL-STD-105/AQS Z1.4. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. A price evaluation preference is available for certified HUBZone Small Business Concerns. Invoicing and payment processing must be conducted through the Wide Area WorkFlow system.

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28RM

Solicitation SPE4A6-26-T-28RM is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of one machine screw, identified by NSN 5305004041403 and Caterpillar part number 4B1273. The government notes that no approved technical data package is currently available as the data is either proprietary or insufficient for competitive procurement. Quotes must be submitted via the DIBBS system, with a required delivery date of September 4, 2026, and a delivery window of 20 days after the order. The shipment is FOB Origin and will be delivered to the Arizona Army National Guard in Bellemont, Arizona. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing sampling methods based on MIL-STD-1916 or ASQ H1331. Key regulatory requirements include adherence to the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the government will not evaluate offers utilizing additive manufacturing unless specifically authorized, and a price evaluation preference may be applied to HUBZone concerns. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M8-26-T-6468

This solicitation, identified as SPE7M8-26-T-6468, is issued by the Department of Defense Electrical Devices Division for the procurement of 38 sensitive switch assemblies under NSN 5930-01-460-6098. The contract requires delivery within 168 days after order and falls under NAICS code 332112. The procurement is governed by the DLA Master List of Technical and Quality Requirements, specifically incorporating RP001 for packaging and RQ011 regarding the removal of government identification from non-accepted supplies. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional mercury in specific instruments or weapon systems as specified by NAVSEA. Offerors must comply with NAVSEA 5100-003D regarding containment for portable mercury-containing lamps and instruments. Additionally, alternate offerors are required to provide a complete data package for both approved and alternate parts. Quotes must be submitted via the DIBBS system by the deadline of September 21, 2026.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

SPRING, HELICAL, EXTENSI

Solicitation # SPE7L1-26-T-10V1

This contract is for the procurement of eight helical extension springs, identified by NSN 5360008758040 and part number 178314 from Allison Transmission Inc. The order is designated as a critical application item and must adhere to specific technical and quality requirements, including MIL-STD-130N for identification marking and strict prohibitions against the intentional use of mercury. Packaging and palletization must comply with MIL-STD-2073-1E and DLA requirement RP001. The delivery is set for 168 days after the order date, with a required delivery date of June 25, 2027, and a need ship date of March 9, 2027. Shipping is FOB Origin, with the destination and inspection point located at Arizona Industries for the Blind in Phoenix, Arizona. The contract is managed by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-10V1.

POSTED

DEADLINE

Solicitation # SPE7L4-26-T-6842

Solicitation SPE7L4-26-T-6842 is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Land and Maritime LSO Combat Vehicles and Armament, for the procurement of 80 machine bolts identified by NSN 5306-01-313-9962. The procurement falls under NAICS 332112 and requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The delivery timeline is set for 168 days after the award, with a need ship date of March 9, 2027, and an original required delivery date of June 26, 2027. All quotes must be submitted via the DIBBS system by September 21, 2026. The contract mandates strict adherence to packaging and marking standards, including ASTM D3951, MIL-STD-129, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-1. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7L1-26-T-09M1

Solicitation SPE7L1-26-T-09M1 is a request for quotations issued by DLA Land and Maritime for the procurement of 4,783 helical compression springs, identified as NSN 5360007994943. This is designated as a critical application item and must be manufactured according to Technical Data Package Rev A Gen 1 and Reference Drawing NR 19207 7994943. The procurement is conducted under full and open competition, with a need ship date of March 9, 2027, and an original required delivery date of March 11, 2027. Delivery is set as FOB Origin, with the final destination being Industries of the Blind Inc in Greensboro, North Carolina. The contract mandates strict quality and compliance standards, including inspection and acceptance at origin. Sampling must follow MIL-STD-1916 or ASQ H1331, with a requirement of zero non-conformances for acceptance. Marking and identification must comply with MIL-STD-129 and MIL-STD-130N, and packaging must adhere to RP001 and MIL-STD-2073-1E. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Offerors must also adhere to the Buy American Act and provide necessary representations regarding HUBZone status and telecommunications equipment.

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3768

This fixed-price solicitation, issued by DLA Troop Support, is for the procurement of 72 feet of Nickel Alloy 400 metal bar. The material must be cold drawn, hexagonal, 0.750 inches wide across flats, and supplied in whole feet lengths between 6 and 20 feet. The procurement is designated as a critical application item and requires a Certificate of Quality Compliance (Mill-Material Certification) to be provided with every shipment. Delivery is required by September 10, 2026, with the destination and acceptance point located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous packaging and marking standards, including compliance with RP001, MIL-STD-129, and ASTM A700, with a specific requirement for continuous identification markings on each unit. All quotes must be submitted via the DIBBS system by September 21, 2026, and must be based on FOB Origin. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and specific cybersecurity requirements for safeguarding covered defense information.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

1 day ago

DEADLINE

in 9 days

AI Contract Overview

This contract specifies the procurement of aluminum alloy channel and structural material made from 2024/T-8511 alloy with exact dimensional requirements: height of 0.375 inches, width of 1.00 inch, thickness of 0.078 inches, and lengths restricted to 10, 11, or 12 feet in whole-foot increments only. The material must comply with stringent technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, including certifications such as CDRL-METALSCERT and a Certificate of Quality Compliance that must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. Each unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper designation, manufacturer’s name, heat and lot number, and dimensions using stamped or stenciled markings that are legible, waterproof, and non-contaminating; adhesive labels are required for small-diameter bars, tubes, and shapes. Strict adherence to the Qualified Suppliers List for Distributors (QSLD) is mandatory, and any deviation must be explicitly declared; failure to use an approved supplier may result in criminal penalties. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with preservation per ASTM B660 and palletization per DLA packaging requirements. The contract requires delivery of 29 feet of material FOB origin within 207 days, with a 10% quantity variance allowed, and inspection and acceptance to occur at the destination. The designated delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, and all documentation must align with referenced standards including SAE AMS-QQ-A-200/3A, ASTM B666/B666M-20, and NAS345.

General Info

Procure 29 feet of 2024/T-8511 aluminum alloy channel, 0.375x1.00x0.078 inches, 10–12 ft lengths, per strict DLA and MIL standards.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE8E4-26-T-1915 for DLA Troop Support Metals

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 22

Solicitation

Response DeadlineAug 3

Deadline has passed

Submission Closed

08/03/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressUSA

Contacts

Pamela Duffey

contact@example.gov

+1 (555) 000-0000

Full Description

CHANNEL,STRUCTURAL
CHANNEL, STRUCTURAL
ALUMINUM ALLOY
2024/T-8511
H:0.375 "
W:1.00"
THK:0.078"
10 TO 12 FT LG
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
SPE8E4-26-T-1915
SECTION B
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev C Gen 3 IAW BASIC NON GOVT STD SAE AMS-QQ-A-200/3A REVISION NR A DTD 11/01/2019 PART PIECE NUMBER:
SPE8E4-26-T-1915
SECTION B
TDP Rev C Gen 3 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev C Gen 3 IAW REFERENCE NON GOVT STD NAS345 REVISION NR 1 DTD 01/01/1978 PART PIECE NUMBER: P/N NAS345-21
TDP Rev C Gen 3 IAW REFERENCE NON GOVT STD SAE AMS-QQ-A-200C REVISION NR C DTD 11/01/2019 PART PIECE NUMBER:
TDP Rev C Gen 3 IAW REFERENCE NON GOVT STD ASTM B666/B666M-20 REVISION NR M DTD 11/01/2020 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017586037 0001 FT 29.000
NSN/MATERIAL:9540011313142
DELIVERY (IN DAYS):0207
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:10
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:10 OPI:M
INTRMDTE CONT:10 INTRMDTE CONT QTY:000
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM B660 PACKING Z = IAW ASTM B660 MARKING IAW MIL-STD-129
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE
SPE8E4-26-T-1915
SECTION B
PR: 7017586037 PRLI: 0001 CONT’D
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/12/2026 Original Required Delivery Date:07/03/2027
SPE8E4-26-T-1915 NSN/Part Number: 9540-01-131-3142 Quantity: 29 FT Purchase Request: 7017586037QTY: 29 Delivery: 207 days ADO