This Solicitation opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

CHARGER, BATTERY

Closed

SPE7LX-26-U-8814Federal

Submission Closed07/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335999

New

DIBBS

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-28QB

Solicitation SPE4A6-26-T-28QB is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of electrical insulation tape, identified as NSN 5970009445015. This commercial item is designated as a critical application item with a non-extendable shelf life of 18 months. The requirement is for a quantity of 4.000 rolls, with a delivery lead time of 20 days and a delivery destination in Okinawa, Japan. Quotations must be submitted via the DLA Internet Bid Board System by September 18, 2026. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking and RP001 for palletization. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity requirements, specifically regarding the safeguarding of covered defense information, is required. Invoicing and payment processing must be conducted through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-27CU

Solicitation SPE4A6-26-T-27CU is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of electrical insulation tape, identified by NSN 5970-00-480-1329. The requirement consists of multiple line items with quantities ranging from 1 to 20 rolls, with required delivery dates scheduled between August 28 and September 8, 2026. Delivery is required within five days of the award, with FOB, inspection, and acceptance all set at the destination. Shipments are directed to various locations, including the USS Shoup DDG 86, the DLA LMP Zone 1 depot in Texas, the Lockheed Martin Distribution Center in Georgia, ASD Oceana in Virginia, and the Base Naval de Rota in Spain. The contractor must adhere to strict quality and packaging standards, including sealing each tape in a waterproof polyfilm bag and packing 10 to 12 rolls per intermediate container. All marking must comply with MIL-STD-129, specifically using Special Marking Code 32 for Type I shelf-life items, which have a non-extendable shelf life of 18 months. The use of mercury or mercury compounds is strictly prohibited in all preservation, packaging, and marking. Technical and quality requirements are further governed by the DLA Master List and RP001 packaging requirements. Evaluation for award will consider price, with a preference for certified HUBZone Small Business Concerns. Offers utilizing additive manufacturing processes are ineligible for award. The procurement is subject to the Buy American Act and the Berry Amendment, requiring disclosure of any non-domestic materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS cybersecurity standards for safeguarding covered defense information.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Electrical Contacts (NSN 5999-01-132-8787)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of Special Purpose Branched Cable Assemblies

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Battery Box Manufacturer/Supplier

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

Supplier of Electromagnetic Relays (NSN 5945-01-136-7909)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Electrical Caps (NSN 5999-00-033-6574)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Electrical Solenoids (NSN 5945-00-369-0865)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Sleeve Bushings (NSN 3120011153346)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

UPS Preventative Maintenance Services

Solicitation # 36C24727Q0028

The Department of Veterans Affairs, specifically Network Contract Office 7, is seeking a provider for UPS Preventative Maintenance Services under solicitation number 36C24727Q0028. This is a combined contract opportunity set aside as a sole source for Service-Disabled Veteran-Owned Small Businesses under NAICS code 335999. The services will be performed in Dublin, Georgia, with the primary point of contact being Quentin Deloney. The solicitation was posted on September 11, 2026, and requires a response by September 22, 2026, at 5:00 PM. Interested parties should refer to the attached documentation for the full scope of the solicitation requirements.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

59--INSULATION SLEEVING,EL

Solicitation # SPE4A6-26-U-4183

Solicitation SPE4A6-26-U-4183 is a request for quotations issued by the ASC Commodities Division of the Department of Defense for the procurement of electrical insulation sleeving, identified by NSN 5970010203420. This is a Women-Owned Small Business set-aside under NAICS code 335999. The government intends to award a unilateral Simplified Indefinite-Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum ceiling of 350,000.00 dollars. The estimated annual quantity is 474 units, with a guaranteed minimum of 47 units and an expected average of two orders per year. Delivery is required within 117 days after order, with shipping to various CONUS and OCONUS DLA Depots under FOB Origin terms. The material must be procured in one continuous length on a reel or spool and marked according to MIL-STD-129. Packaging must comply with RP001 and the Hazard Communication Standard for any hazardous materials. Inspection and acceptance will occur at the destination, utilizing a zero-based sampling plan per MIL-STD-1916 or ASQ H1331. Award will be based on the most advantageous offer considering price and other factors, though items produced via additive manufacturing are ineligible. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotes must be submitted electronically via DIBBS by September 25, 2026.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 13 days

AI Contract Overview

The contract is for the procurement of 16 battery chargers under NSN 6130-01-487-1154, issued as an indefinite-delivery contract with a maximum value of $350,000 and a guaranteed minimum of two units. Delivery is required within 48 days FOB origin, with inspection and acceptance occurring at the destination point, and no variance is permitted in quantity. Packaging must comply with MIL-STD-2073-1E using preservation method 41—clean and dry—with no chemical or barrier materials applied, and labeling must adhere to MIL-STD-129 with a 2D Data Matrix bar code for traceability. Palletization follows DLA’s RP001 packaging requirements. All items must meet zero non-conformance acceptance criteria under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively; if not specified, attributes are treated as major. Mercury and mercury-containing compounds are prohibited unless used functionally in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shock-proof with a secondary containment barrier. Compliance with numerous FAR and DFARS clauses is required, including safeguarding covered defense information, cyber incident reporting, prohibition of hexavalent chromium, restrictions on certain foreign-sourced equipment, and whistleblower protections. Electronic invoicing and receiving reports must be submitted through Wide Area WorkFlow, and the offeror must provide a valid Unique Entity ID and CAGE code with full socioeconomic representations, including small business and HUBZone status if applicable. The contract incorporates by reference the DLA Master List of Technical and Quality Requirements, and deviations apply to specific clauses regarding cybersecurity, changes, and subcontracting. No evaluation factors or award basis are explicitly stated, and pricing is not provided, rendering the contract non-binding until individual delivery orders are issued.

General Info

Procure 16 chargers and batteries, NSN 6130-01-487-1154, FOB origin, 48-day delivery, MIL-STD compliant, zero defects.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7LX-26-U-8814 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 14

Solicitation

Response DeadlineJul 29

Deadline has passed

Submission Closed

07/29/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressUSA

Contacts

Theodore Misiolek

contact@example.gov

+1 (555) 000-0000

Full Description

CHARGER,BATTERY
CHARGER,BATTERY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
MIL-STD-129P(4) REQUIRED
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CRITICAL APPLICATION ITEM
THALES DEFENSE & SECURITY INC 23386 P/N MA6751
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7LX-26-U-8814
SECTION B
PR: 1000237405 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000237405 0001 EA 16.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:6130014871154
DELIVERY (IN DAYS):0048
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A UNIT CONT:D3 OPI:O INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7LX-26-U-8814 NSN/Part Number: 6130-01-487-1154 Quantity: 16 EA Purchase Request: 1000237405QTY: 16 Delivery: 48 days ADO