CHIP, CHEMICAL, AMMON
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract specifies the procurement of a chemical chip designed for ammonia detection, with a measurement range of 2.0 to 50.0 ppm, and is part of a diagnostic system that utilizes ten capillary channels filled with substance-specific reagents to eliminate cross-sensitivity and ensure accurate readings. Each chip is manufactured with integrated gas type, part number, and batch number printed directly on the device, and is calibrated during production with a validity period of two years. The end item is identified by NSN 6640-01-497-5784, with a unit of issue as each, and must have a minimum shelf life of 24 months, with no more than four months having elapsed from the date of manufacture to the date of delivery to the government. Packaging and marking must comply strictly with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be sealed in suitable containers that protect against damage and ensure safe, cost-effective delivery via common carrier to the designated delivery point in APO, 96260-5479. Labels must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number, and bidders must clearly identify the source and part number being offered. The solicitation is issued under SPE2DH-26-T-5735, with a response deadline of August 10, 2026, and is subject to DLA’s Master List of Technical and Quality Requirements, with packaging and documentation requirements binding under Federal acquisition guidelines applicable to medical procurements.
General Info
Agency
NAICS
Place of Performance
UNIT 15479, APO, AP, 96260-5479, USSet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Response Deadline
Organization & Contact Information
Full Description
CHIP, CHEMICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
PROVIDES BEST RESULTS POSSIBLE CAPILLARIES
OF SEVERAL CHIPS HAVE MULTIPLE LEVELS TO HELP
ELIMINATE CROSS SENSITIVITY OR DERIVE A
SPECIFIC MEASUREMENT OF THE TARGETED CHEMICAL
CHIP CONSISTS OF 10 MEASUREMENT CAPILLARIES
FILLED WITH SUBSTANCE SPECIFIC REAGENT SYSTEMS;
GAS TYPE, PART NUMBER AND BATCH NUMBER ARE
PRINTED ON CHIP AND
BARCODE READ BY THE ANALYZER OPTICS
SPE2DH-26-T-5735
SECTION B
CONTAINS INFORMATION ABOUT GAS TYPE, MEASURING
RANGE AND MEASURING TIME REQUIRED FOR COMPLETING THE MEASUREMENT; EACH
CHIP IS CALIBRATED
DURING MANUFACTURING AND IS VALID FOR 2 YEARS;
AMMONIA, RANGE 2.0-50.0 PPM
.
END ITEM NSN 6640-01-497-5784
.
UNIT OF ISSUE:EACH (EA)
.
SHALL HAVE A SHELF LIFE OF 24 MONTHS.
NOT MORE THAN FOUR MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
LABELS SHALL INCLUDE:
NSN
MANUFACTURER AND CAGE
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER
.
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6640-01-497-5789 Quantity: 1 EA Purchase Request: 7017723151QTY: 1 Delivery: 84 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
Same awarding agency