Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CHIP, MERCAPTAN

Active
SPE2DS-26-T-224DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The CHIP, MERCAPTAN item is a diagnostic test device containing ten measurement capillaries pre-filled with a substance-specific reagent system designed for use with the CMS analyzer, capable of detecting mercaptan concentrations within a range of 0.25 to 6.0 ppm and providing ten individual tests per unit. Each unit is sold individually and must comply with strict packaging and labeling standards, including commercial packaging that ensures protection from damage and proper shipping to the government delivery point at the lowest carrier rate. All packaging and marking must adhere strictly to Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and must include the date of manufacture, expiration date, contract number, and lot number as specified in the latest revision of MMS1C. This item carries a non-extendable shelf life of 24 months from the date of manufacture, with the requirement that no more than three months may have passed between manufacture and delivery to the government. The contract is governed by technical and quality requirements referenced in the DLA Master List, with the revision in effect on the solicitation issue date controlling compliance. The NSN 6550-01-530-8027 is procured under solicitation SPE2DS-26-T-224D, with a single unit ordered and a delivery deadline of five days after award. Applicable defense information protocols apply, and the solicitation is managed by the Department of Defense’s Medical Supply Chain unit, with primary point of contact Kendall Jones at DLA. All supplier obligations are bound by federal acquisition regulations and packaging mandates for medical supplies.

General Info

CHIP, MERCAPTAN test device, ten capillaries, 0.25–6.0 ppm range, 24-month shelf life, MMS1C labeling, delivery in five days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

621410 - Family Planning CentersView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE2DS-26-T-224D Medical Supply Chain

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Kendall Jones
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHIP,MERCAPTAN
CHIP, MERCAPTAN
FEATURES CHIP CONTAINS TEN MEASUREMENT CAPILLARIES FILLED WITH A
SUBSTANCE-SPECIFIC REAGENT SYSTEM; MEASURING RANGE IS 0.25-6.0PPM; THE
TEST CAPABILITY IS 10 TESTS; FOR CMS ANALYZER
UNIT OF ISSUE EACH, EA
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a
SPE2DS-26-T-224D
SECTION B
shelf life of 24 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 24 MONTHS.
NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
ADEQUATE DATA FOR THE NSN/Part Number: 6550-01-530-8027 Quantity: 1 EA Purchase Request: 7017447565QTY: 1 Delivery: 5 days ADO

Similar Contracts

NAICS: 621410
New
DIBBS
CHIP, PHOSPHINEThe product is a CHIP, PHOSPHINE designed for use with the Dräger CHIP-Measurement-System, containing ten measurement capillaries pre-filled with a reagent specific to phosphine detection, with a measuring range of 20.0 to 500 ppm and a total capacity for ten tests per unit. Each unit is individually packaged and must be shipped in sealed, commercial-grade containers that protect against damage and ensure safe delivery via common carrier at the lowest cost to the specified delivery point. Packaging and labeling must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and must include the date of manufacture, expiration date, contract number, and lot number as required by MMS1C. The item has a strict non-extendable shelf life of 24 months, with no more than four months allowed to have passed from date of manufacture to delivery to the government. Storage must be maintained between 5 °C and 25 °C to preserve integrity. The item is identified by NSN 6550-01-530-8370, and bidders must clearly state the source and part number being supplied. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and packaging must adhere to DLA procurement standards. This solicitation, issued under contract number SPE2DS-26-T-223V, requires delivery within five days of award and is managed by the Department of Defense’s Medical Supply Chain organization with primary contact Anh Lam.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
CHLORINE TEST TABLEThe contract specifies the procurement of chlorine test tablets designated as DPD No. 3, which measure combined chlorine levels in water—sanitizers that have reacted with impurities—supplied in push-through packaging with a unit of issue of one pound containing 100 tablets. The product is governed by technical and quality requirements from the DLA Master List, with compliance based on the revision in effect at the solicitation or award date depending on acquisition size. Shelf life is strictly limited to 30 months from manufacture, with no extensions permitted, and delivery to the government must occur within four months of manufacturing. Labeling requirements mandate clear display of manufacture date, expiration or retest date, and contract or lot number in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129. Packaging must be commercial-grade, sealed to prevent damage, and shipped in suitable exterior containers ensuring safe, cost-effective delivery to the specified point, with all markings compliant with MMS No. 1. The NSN is 6550-01-574-6867, quantity is one pound, and delivery must occur within five days of award under contract SPE2DS-26-T-222R. The solicitation was issued on July 12, 2026, with responses due by July 20, 2026, managed by the Department of Defense’s Medical Supply Chain, with point of contact Anh Lam at DLA.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
PLASMA CONTROL, NORMALPLASMA CONTROL, NORMAL LEVEL is a certified quality control solution intended exclusively for use with citrated plasma samples in coagulation testing, specifically for Prothrombin Time (PT) and Activated Partial Thromboplastin Time (APTT) assays on the NS 6630-01-519-3589 coagulation analyzer. Each packaging unit contains 15 vials arranged in 4 sleeves, and the product must be stored refrigerated between 2°C and 8°C (36°F–46°F) to maintain stability. It is classified as a TYPE I (CODE G) medical device with a non-extendable shelf life of 9 months, strictly regulated by the FDA, and must be procured under the specified part number 000DCJCPT-N supplied by WERFEN USA LLC. The item is identified by NSN 6550-01-519-7696 and requires compliance with Medical Marking Standard No. 1, superseding MIL-STD-129, with all packaging and labeling meeting DLA specifications for containment, protection, and shipping integrity. The contract requires delivery of two packaging groups (PG), each containing 15 vials, for a total of 30 vials, under solicitation SPE2DS-26-T-221S with a delivery deadline of 84 days to APO 96260-5479, FOB destination. Inspection and acceptance occur at the delivery point with zero tolerance for quantity variance. All packaging must conform to MIL-STD-2073-1E guidelines and incorporate proper commercial shipping containers suitable for safe transport by common carriers at the lowest cost. The bidder must provide the exact source and part number, and the acquisition is subject to DLA’s technical and quality requirements as outlined in their Master List, with mandatory referral through EBS to confirm regulatory compliance. The product is designated for federal medical procurement under the Department of Defense, and all documentation must adhere to the applicable federal acquisition standards and marking protocols.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
CONTROL, COOMBS TESTThe CONTROL, COOMBS TEST is a liquid control product designed for 200 tests, requiring refrigerated storage between 2 to 8 degrees Celsius and must not be frozen. Each unit is packaged in a 10 mL container and sold individually. The product is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, and it is classified as a Type I (Code A) medical item with a non-extendable shelf life of one month. At least 85% of the shelf life must remain from the date of manufacture to the date of delivery to the government, with labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards and be suitable for safe transport via common carrier, with export packaging when necessary, and must be marked according to Medical Marking Standard No. 1. The item is governed by the contract solicitation SPE2DS-26-T-223L, with a delivery requirement of five days after delivery order, under the NSN 6550-01-269-4302, and is managed by the Department of Defense’s Medical Supply Chain at the performance location in San Antonio, Texas, with point of contact Mary-Kathryn Donahue.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
PLASMA CONTROL, NORMALPLASMA CONTROL, NORMAL LEVEL is a quality control solution designed for use with citrated samples in prothrombin time (PT) and activated partial thromboplastin time (APTT) coagulation testing, specifically compatible with NS 6630-01-519-3589 coagulation analyzers. The product is supplied as 15 vials arranged in four sleeves per packaging unit and must be stored under refrigeration between 2 and 8 degrees Celsius (36 to 46 degrees Fahrenheit) to maintain stability. It is classified as a Type I (Code G) medical device with a non-extendable shelf life of nine months and is regulated by the FDA, requiring confirmation through the EBS referral process prior to procurement. The item is identified by NSN 6550-01-519-7696 and manufacturer part number 000DCJCPT-N, provided by WERFEN USA LLC. The contract mandates adherence to Medical Marking Standard No. 1 (MMS NO. 1) for labeling, superseding MIL-STD-129, and packaging must comply with MIL-STD-2073-1E to ensure protection against damage during transport. Shipments must be consolidated in commercial exterior containers suitable for safe delivery via common carrier at the lowest feasible rate to the specified destination, with delivery required within five days FOB destination. No quantity variance is permitted, and inspection and acceptance occur at the delivery point. The procurement is governed by DLA’s Master List of Technical and Quality Requirements, with sourcing and part number disclosures required from bidders. The solicitation number is SPE2DS-26-T-223P, issued by the Department of Defense’s Medical Supply Chain, with procurement managed by the Office of the Contracting Officer in San Antonio, Texas.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details