Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CHIP, NITROUS GASES

Active
SPE2DS-26-T-253MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of CHIP, NITROUS GASES, a diagnostic device containing ten capillaries pre-filled with a substance-specific reagent system designed to measure nitric oxide and nitrogen dioxide concentrations within a range of 10.0 to 200 PPM, with a testing capacity of ten tests per unit for use with the CMS analyzer. The item is identified by NSN 6550-01-530-8352 and is governed by solicitation SPE2DS-26-T-253M, with a required delivery within 20 days of award. The product must possess a non-extendable shelf life of 24 months, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring secure containment and safe transport via common carrier to the delivery point at Joint Base Andrews, Maryland. Labels must clearly indicate the date of manufacture, expiration date, contract number, and lot number consistent with MMS1C requirements. The acquisition falls under Federal procurement guidelines and incorporates technical and quality requirements from the DLA Master List, with applicable provisions including packaging, removal of government identification from non-accepted supplies, and the handling of covered defense information.

General Info

One unit of CHIP nitrous gases diagnostic device, 10 tests, 24-month shelf life, delivery to Joint Base Andrews in 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

621410 - Family Planning CentersView NAICS

Place of Performance

3424 TENNESSEE AVE, JOINT BASE ANDREWS, MD, 20762, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE2DS-26-T-253M

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Tiffany Parker
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHIP,NITROUS GASES
CHIP, NITROUS GASES
FEATURES CHIP CONTAINS TEN MEASUREMENT CAPILLARIES FILLED WITH A
SUBSTANCE-SPECIFIC REAGENT DETECTION SYSTEM; MEASURING RANGE IS 10.0-200
PPM; (NO + NO2); THE TEST CAPABILITY IS 10 TESTS; FOR CMS ANALYZER
UNIT OF ISSUE EA (EACH)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a
SPE2DS-26-T-253M
SECTION B
shelf life of 24 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 24 MONTHS. NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE GOVERNMENT. . SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE CONTRACT NUMBER/LOT NUMBER. .. ADEQUATE DATA FOR THE NSN/Part Number: 6550-01-530-8352 Quantity: 1 EA Purchase Request: 7017547713QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 621410
New
DIBBS
CHIP, CARBON DIOXIDEThe item specified is a CHIP, CARBON DIOXIDE, a single-use diagnostic component containing ten measurement capillaries pre-filled with a carbon dioxide reagent designed for use with the CMS gas analyzer. It has a measurement range of 200 to 3000 ppm and is issued in individual units. The contract requires strict compliance with technical and quality standards referenced in the DLA Master List, including packaging per DLA requirements, removal of government identification from non-accepted supplies, and adherence to Medical Marking Standard No. 1 which supersedes MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier at the lowest cost to Joint Base Andrews, Maryland. The item carries a non-extendable shelf life of 24 months, with the condition that no more than three months may have elapsed between date of manufacture and government delivery. Labeling must include the date of manufacture, expiration date, retest date, contract number, and lot number in accordance with the latest revision of MMS1C. The procurement is governed by solicitation SPE2DS-26-T-254L, with a deadline for response on July 27, 2026, and a delivery date of 20 days after award. Two units are required under purchase request 7017553325, and the contract falls under NAICS code 621410 as a federal medical supply acquisition managed by the Department of Defense through the Medical Supply Chain MD Surg FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
BLOOD DILUTING SOLUTIOThe contract requires the supply of 20-liter bottles of blood diluting solution, specifically designed for counting red and white blood cells, and formulated as isotonic with no azide content. The item is identified by NSN 6550-01-034-5640 and is procured under solicitation SPE2DS-26-T-256C with a delivery deadline of 20 days ADO. Each unit must meet stringent packaging and marking standards as defined by Medical Marking Standard No. 1, superseding MIL-STD-129, and must be labeled with the date of manufacture, expiration date, contract number, and lot number in compliance with MMS1C. The product has a non-extendable shelf life of 12 months, and no more than one month may have passed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA requirements, ensuring commercial-grade sealed unit containers and suitable exterior shipping containers capable of safe transport at the lowest possible rate, with government identification removed from non-accepted supplies. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, and the contract is subject to covered defense information provisions. The procurement is managed by the Department of Defense’s Medical Supply Chain, with primary point of contact Marc Canalichio.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
CHIP, OXYGEN
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
CHIP, VINYL CHLORIDEThe item is a CHIP, VINYL CHLORIDE diagnostic test unit containing ten measurement capillaries pre-filled with a substance-specific reagent detection system, designed for use with the CMS analyzer and capable of measuring vinyl chloride concentrations between 10.0 and 250 ppm. Each unit is sold individually and must meet strict technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements under revision SPE2DS-26-T-253R. The product is classified as a Type I (Code M) medical item with a non-extendable shelf life of 24 months, and no more than three months may have passed between the date of manufacture and the delivery date to the government. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must include clear labeling with the date of manufacture, expiration date, and contract or lot number according to MMS1C guidelines. Packaging must ensure protection against damage during shipment, with commercial-grade sealed unit containers and suitable exterior shipping containers appropriate for safe transport by common carriers at the lowest cost to Joint Base Andrews, Maryland, 20762. The procurement is subject to Covered Defense Information requirements and DLA packaging standards, and all items must be marked and packaged to meet federal medical acquisition standards. The solicitation was issued on July 20, 2026, with a response deadline of July 27, 2026, under NSN 6550-01-530-8344, and delivery is required within 20 days after award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
TEST KIT, INFLUENZA +BThe contract specifies the procurement of a rapid diagnostic test kit for the qualitative detection of influenza A and B antigens directly from nasal swabs, nasal washes, or nasal aspirates. Each kit contains 25 individual tests, with results available within 10 minutes, and the kits are designed for room temperature storage between 59°F and 86°F. The product is intended as an aid in the rapid differential diagnosis of acute influenza infections and is identified by NSN 6550-01-531-2897 with a unit of issue of one kit per order. Strict shelf-life requirements mandate a minimum of 24 months from manufacture to expiration, with no more than three months having passed from the date of manufacture to the date of delivery to the government. Labeling must include the date of manufacture, expiration or retest date, and contract or lot number, in compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial-grade, sealed, and protective, with exterior shipping containers ensuring safe, low-cost delivery to the designated delivery point in Groton, Connecticut. The contract enforces compliance with federal regulations regarding hazardous communication, requiring suppliers to provide Safety Data Sheets aligned with OSHA’s Hazard Communication Standard as amended under the Globally Harmonized System, along with compliant labeling as per 29 C.F.R. 1910.1200. Suppliers must also certify employee training on these updated SDS and labeling requirements. Additionally, all documentation must adhere to DLA’s technical and quality requirements referenced in the DLA Master List, and government identification must be removed from non-accepted supplies. The solicitation, issued under contract number SPE2DS-26-T-251A, has a response deadline of July 27, 2026, and requires delivery within five days of award. The product falls under NAICS code 621410 and is managed by the Department of Defense’s Medical Supply Chain Medical Surgical Functional Service Facility, with Seth Tootell designated as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
CHIP, HYDROCHLORIC AThe item is a CHIP, HYDROCHLORIC A, containing ten measurement capillaries filled with a reagent specific to hydrochloric acid testing, designed for use with the CMS analyzer and capable of performing ten tests with a measuring range of 20.0 to 500 ppm. Each unit is sold individually, and the product is subject to strict technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers. It is classified as a Type I (Code M) medical item with a non-extendable shelf life of 24 months, and no more than three months may have passed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, and contract or lot number, in compliance with the latest revision of Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Packaging must be commercial grade, sealed to prevent damage or breakage, and placed in suitable shipping containers that ensure safe and cost-effective delivery to Joint Base Andrews, Maryland. All packaging and marking must conform to MMS No. 1 standards, and the item is subject to DLA packaging requirements and the potential application of covered defense information controls. The solicitation number is SPE2DS-26-T-253J, with a response deadline of July 27, 2026, and the NSN is 6550-01-530-8038.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 621410
New
DIBBS
CHIP, SULFUR DIOXIDEThe contract is for a single unit of a CHIP, SULFUR DIOXIDE test device containing ten measurement capillaries with a substance-specific reagent detection system designed to measure sulfur dioxide concentrations between 5.0 and 150 ppm, intended for use exclusively with the CMS analyzer. The item has a National Stock Number of 6550-01-530-8357 and is governed by the procurement document SPE2DS-26-T-253N. It is classified as a TYPE I (CODE M) medical supply with a strict non-extendable shelf life of 24 months, requiring that no more than three months have passed from the date of manufacture to the date of delivery to the government. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container that ensures safe transport via commercial carriers at the lowest possible rate. Packaging must include mandatory labeling with the date of manufacture, expiration or retest date, contract number, and lot number in alignment with the latest revision of MMS1C. The item is subject to Defense Logistics Agency packaging requirements and the potential application of covered defense information protocols, with all technical and quality requirements referenced from the DLA Master List. The solicitation was issued on July 20, 2026, with a response deadline of July 27, 2026, and the anticipated delivery is within 20 business days after award. The purchasing entity is the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required at Joint Base Andrews, Maryland, 20762. The primary point of contact for inquiries is Tiffany Parker, reachable by phone or email. The contract falls under NAICS code 621410 and is a federal acquisition with no set-aside classification. The item is classified as a medical procurement, triggering specific commercial packaging and marking standards, and must be delivered without government identification removed if non-accepted, per relevant regulations. All documentation and compliance obligations are tied to the DLA Master List of Technical and Quality Requirements as in effect on the solicitation issue date, with adherence to these standards mandatory for acceptance.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 621410
New
DIBBS
CUVETTE, TEST, PROTHRThis contract specifies the procurement of prothrombin time test cuvettes designated for use with the HemoChronic Signature JR coagulation analyzer, designed specifically for citrated whole blood samples. The item is identified by NSN 6550-01-519-3890 and must be supplied in packaged units of 45 cuvettes per PG, with a strict shelf-life requirement of 12 months from manufacture, non-extendable. No more than two months may have elapsed between the date of manufacture and delivery to the government, and each container must be clearly marked with the lot number and manufacture date prefixed by “MFD.” The product requires refrigeration between 2 and 8 degrees Celsius throughout storage and transport and is subject to FDA regulation. Packaging must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and all units must be sealed in commercial containers that protect against damage and ensure safe, cost-effective delivery to the designated destination under FOB destination terms. The solicitation, issued under contract number SPE2DS-26-T-250Q, requires bidders to clearly state the source and part number of the item supplied, with manufacturer identifiers including WERFEN USA LLC P/N 000J201C and HENRY SCHEIN INC P/N 6738980. The order quantity is one PG with zero variance allowed, and delivery is due within 84 days. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date. Packaging must adhere to MIL-STD-2073-1E standards, and government identification must be removed from non-accepted supplies. The contract includes provisions for covered defense information and mandates that buyers refer the bid to the product specialist via EBS for confirmation, providing full manufacturer and bidder details. All deliveries must be made to APO, 09227-0000, with inspection and acceptance occurring at the destination.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
CHLORIDE TEST REAGEThe contract specifies the procurement of Chloride Test Reagent, a powdered reagent used in argentometric titration with silver nitrate for chloride determination, supplied in 100 mL sample sizes in pillow form. The product must have a shelf life of 60 months, with no more than nine months elapsed between the date of manufacture and the delivery date to the government. All units must be sealed in suitable containers to prevent damage or breakage and packed in commercial exterior shipping containers that ensure safe, low-cost delivery to the specified point of performance, including export requirements when applicable. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be properly labeled in accordance with this standard. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation or award date controlling based on procurement type. The item is identified by NSN 6550-01-494-3677, with a quantity of one purchase group, and must be delivered within ten days of award. The solicitation is issued by the Department of Defense under Medical Supply Chain MD Surg FSF with a place of performance at Fort Carson, Colorado, and primary point of contact is Anh Lam at DLA.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
TEST KIT, SALMONELLA IDA rapid latex-based test kit for Salmonella identification is being procured, designed to quickly group Salmonella strains through distinctive color reactions using two latex reagents, along with red, blue, and green positive controls to ensure accuracy. The kit includes all necessary disposable components such as mixing sticks, reaction cards, sample dispensers, and suspension tubes to maintain sterility and ease of use in laboratory or field settings. The item is identified by NSN 6550-01-360-5759 with a single unit order under purchase request 7017531809 and is scheduled for delivery within five days after order placement. This procurement falls under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with the solicitation number SPE2DS-26-T-248N posted on July 19, 2026, and responses due by July 27, 2026. The NAICS code 621410 indicates alignment with medical laboratories, and the delivery point is Williamsburg, Virginia, 23185-5830, with Tiffany Parker listed as the primary point of contact for inquiries.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIUM, MOTIThe contract specifies the procurement of Culture Medium for Motility Determination, identified by NSN 6550-01-732-8840, with a quantity of 2 packages, each containing 20 tubes of 5 mL each. The medium contains TTC indicator for motility testing and is supplied in 15mm x 103mm tubes. The item has a non-extendable shelf life of 12 months, and no more than one month may have elapsed from the date of manufacture to the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, requiring clear markings for the date of manufacture, expiration date, contract number, and lot number in accordance with MMS1C. The product must be stored between 2 to 8 degrees Celsius and must not be frozen. Packaging must meet DLA requirements, ensuring commercial-grade sealed unit containers and suitable exterior shipping containers that guarantee safe delivery at the lowest freight rate, with all items marked per MMS No. 1. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, and applicable defense information controls are in force. The item requires refrigeration upon receipt and must be delivered within five days of award. Bidders must provide the source and part number, and all documentation must align with the solicitation SPE2DS-26-T-248U, issued by the Department of Defense under the Medical Supply Chain MD Surg FSF, with delivery to Williamsburg, VA.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 621410
New
DIBBS
TEST KIT, REVERSE BLOODThe test kit for reverse blood grouping consists of two 10 ml dropper-top bottles, one containing Group A1 cells and the other Group B cells, designed to confirm forward blood grouping results. The product must be stored under refrigeration between 2 to 8 degrees Celsius and must not be frozen. It is sold in units of issue as a set of two 10 ml bottles and is subject to strict packaging and marking requirements in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport at the lowest carrier rate to the delivery point in Williamsburg, Virginia. The item has a non-extendable shelf life of one month, with no more than four days elapsed between the date of manufacture and the date of delivery to the government. Labels must clearly indicate the date of manufacture, expiration date, contract number, and lot number, all formatted per the latest revision of MMS1C. This procurement is governed by the DLA Master List of Technical and Quality Requirements referenced in RA001 and subject to DLA packaging standards under RP001 and the removal of government identification from non-accepted supplies under RQ011. The NSN is 6550-01-204-5367, with a quantity of 2 sets required, delivery due within five days of award, and the solicitation number is SPE2DS-26-T-248S, with a response deadline of July 27, 2026. Point of contact for inquiries is Anh Lam at DLA Troop Support.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
NEBULIZER, MEDICINALThe contract specifies the procurement of 50 units of a medicinal nebulizer, each comprising a mouthpiece, TEE, 7-foot tubing, and a 6-inch flex tube, with the unit of issue listed as PG/50EACH. Each complete unit must be sealed in a protective container to prevent damage or breakage and packed in commercial shipping containers suitable for safe transport via common carriers at the lowest cost to the delivery point at Fort Campbell, Tennessee. All items must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and markings must be applied in accordance with this standard, which is available through DLA Troop Support. The procurement is governed by technical and quality requirements from the DLA Master List, with applicable revisions tied to the solicitation or award date. Bidders are required to clearly identify the source and part number of the supplied product. The NSN is 6515-01-466-0371, with a delivery requirement of 20 days after order award under solicitation SPE2DS-26-T-254Q, issued by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 423450
New
DIBBS
BAG, URINE COLLECTIONThe contract is for a urine collection bag with a 2000 CC capacity, featuring 182.88 cm (72 inch) tubing and a 400 mL urine meter with a white background and graduated markings, including a small burette chamber and a spring-loaded sample port designed for use with a Foley catheter. The package includes a Foley tray and a 10 CC prefilled syringe in 18 French size with a 5 CC capacity, supplied as a disposable unit in packages of ten. The item is identified by NSN 6515-01-406-7748, with a quantity of two packages required, under purchase request 7017553324, and delivery must be completed within 20 days of award. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring that each unit is sealed and protected against damage and that shipping containers guarantee safe delivery at the lowest cost to the specified point of performance at Scott AFB, 62225-5252. The solicitation is issued under SPE2DS-26-T-255A with a submission deadline of July 27, 2026, and incorporates referenced technical and quality requirements from the DLA Master List, requiring bidders to specify the exact source and part number being offered. Compliance with DLA packaging and marking directives is mandatory for all medical acquisitions under this solicitation.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
ADAPTER, OXYGEN FLOWThe adapter is a flexible silicone device designed to connect a Passy Muir Valve to ventilator tubing or closed suction systems, featuring a 22mm outer diameter that stretches to ensure a secure fit. It is color-coded purple for compatibility with the PMV 2001 model and is also usable with the PMV 2000 and PMV 005. The adapter is latex-free and intended for use within ventilator circuits to facilitate airflow control while maintaining a reliable seal. It is sold individually, with the unit of issue listed as each. The product is identified by NSN 6515-01-722-3342 and must be marked according to the latest Medical Marking Standard No. 1. Bidders are required to specify the source and part number being supplied. The procurement falls under solicitation SPE2DS-26-T-255Y, issued by the Department of Defense’s Medical Supply Chain MD SURG FSF, with a response deadline of July 27, 2026. Delivery is required within five days of award, and the contract incorporates DLA technical, quality, and packaging requirements, including the removal of government identification from non-accepted supplies.
Surgical and Medical Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 315990
New
DIBBS
APRON, CRYOGENICThe cryogenic apron is a multi-layer protective garment measuring 42 inches in length and 24 inches in width, designed to safeguard the torso and upper legs from extreme cold exposure caused by direct contact with cryogenic materials or splashes of supercooled liquids. Constructed from material capable of withstanding temperatures ranging from -162 to +148 degrees Celsius (-260 to +300 degrees Fahrenheit), it features adjustable straps and quick-release buckles at both the waist and neck for secure, customizable fit and rapid removal in emergencies. Proper storage requires a clean, dry environment to maintain performance integrity. The item is sold as a single unit, identified by NSN 8415-01-497-6110, with a requirement for one unit under purchase request 7017556478 and delivery expected within five days of award. Compliance with DLA packaging and technical requirements is mandatory, referencing the DLA Master List of Technical and Quality Requirements, and bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-255H by the Department of Defense through the Medical Supply Chain MD Surg FSF, has a response deadline of July 27, 2026, and is targeted at federal suppliers with performance directed to APO ZIP 96328-5225.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
CATHETERIZATION KIT, URThe contract specifies the procurement of a urethral catheterization kit, identified by NSN 6515-01-615-2124, containing a 16 Fr Foley catheter with a 2000 mL anti-reflux valve bag, designed for infection control and including a complete set of sterile accessories: drape, underpad, specimen container, five prep balls, povidone-iodine solution, gloves, dual prefilled syringes (10 cc sterile water and 10 cc lubricant), and forceps. Each unit is packaged as a sealed tray of ten kits, with the unit of issue defined as a packaged group of ten. The product must have a mandatory 36-month shelf life, with no more than five months elapsed from manufacture to government delivery. Labeling must include NSN, manufacturer and CAGE code, date of manufacture or expiration, contract number, and lot number, in compliance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet commercial standards under DLA’s RP001 requirements, protect against damage, and be shipped in suitable exterior containers to ensure safe, low-cost delivery to the destination. All packaging and labeling must adhere to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards like ASTM D3951. The product is FDA-regulated and subject to referral verification in EBS. Delivery is FOB destination, with zero tolerance for quantity variance. Two shipments totaling one package each are required, with delivery deadlines of July 22 and July 23, 2026, to Fort Bragg, North Carolina, and USS Charleston, respectively. All shipments must use traceable transportation methods, prohibiting parcel post, and palletization must comply with DLA packaging guidelines.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
DRESSING, OCCLUSIVE, ADHThis contract specifies the procurement of TEGADERM Transparent Occlusive Adhesive Dressings, each measuring 2.375 inches wide by 2.750 inches in length, intended for use as a sterile dressing for peripheral and central intravenous catheters or as a wound covering. The product is to be supplied in individually packaged units, with a unit of issue consisting of 100 packages per lot. The dressings must have a shelf life of 36 months from the date of manufacture, and no more than five months may have elapsed between the manufacturer’s date and delivery to the government. All markings must comply with Medical Marking Standard No. 1, which replaces MIL-STD-129, and must include the date of manufacture, expiration or retest date, contract number, and lot number. Packaging must adhere to commercial standards, ensuring protection from damage during transit, with interior units sealed in suitable containers and exterior shipping containers designed for safe, low-cost delivery via common carrier to the specified point of delivery, including FPO destinations. The item is identified by NSN 6510-01-234-8943, with a required quantity of three packages, and delivery must occur within 20 days of award. The solicitation number is SPE2DS-26-T-255V, with a response deadline in July 2026, and all technical and quality requirements referenced under R-numbers are governed by the DLA Master List of Technical and Quality Requirements in effect at the time of solicitation. The supplier must clearly state the source and part number being offered, and government identification must be removed from any non-accepted supplies in accordance with RQ011.
Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
CURETTE, EARThe contract pertains to the procurement of a pediatric ear curette with a flexible loop, measuring seven inches in length, featuring a blunt blade edge made of plastic, supplied in cases of fifty units each. The item is identified by the NSN 6515-01-290-8955 under solicitation SPE2DS-26-T-255L, with a response deadline of July 27, 2026, and a requirement for delivery within 20 days after award. Suppliers must specify the source and part number being offered, and all medical acquisitions must adhere to commercial packaging standards ensuring each unit is sealed in a protective container and packed in commercial shipping containers suitable for safe transport at the lowest cost to the designated delivery point in Fort Campbell, 42223-0000. Marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The solicitation incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date. Packaging must also meet DLA-specific requirements, and non-accepted supplies must have government identification removed. This procurement falls under NAICS code 339112 and is administered by the Department of Defense’s Medical Supply Chain MD Surg FSF.
Surgical and Medical Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
TEST STRIPS, GLUCOSEThe contract specifies the procurement of Prodigy AutoCode blood glucose test strips, a no-coding product compatible with all Prodigy pocket meters, utilizing oxidase technology for safer and more accurate results without GDH-PQQ technology. These strips feature capillary action for automatic blood sample intake and are approved for alternate site testing. Each box contains 50 strips, with the unit of issue being BX, and the order quantity is two boxes. The items must comply with stringent packaging and labeling requirements, including commercial packaging standards per Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must be marked with the date of manufacture, expiration or retest date, contract number, and lot number. A non-extendable shelf life of 24 months is mandated, with no more than three months allowed to have passed from the date of manufacture to delivery to the government. The strips are subject to DLA packaging and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, and the NSN 6550-01-680-9339 must be supplied with verified source and part number. The solicitation, issued under SPE2DS-26-T-256F, requires delivery within 20 days and is managed by the Department of Defense’s Medical Supply Chain.
Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
CUFF, SPHYGMOMANOMETERThe contract specifies the procurement of pediatric-sized non-invasive blood pressure cuffs, with bladder dimensions of 3.5 inches in width and 7.1 inches in length, designed for limb circumferences between 18 and 26 centimeters. This item serves as a replacement component for NSNs 6515-01-582-4060 and 6515-01-582-4072, and is identified by NSN 6515-01-593-8773 and Philips part number 40401B. Three units are required, each to be delivered as a single unit of issue, with a firm delivery deadline of 20 days after award, FOB destination, and no variance permitted in quantity. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and must also meet ASTM D3951 standards, with DLA Master List of Technical and Quality Requirements taking precedence. Packaging must ensure protection from damage and be suitable for commercial shipping, using sealed unit containers and secure exterior shipping containers capable of safe transport at the lowest rate. The shipment must be traceable and cannot be sent via parcel post. Delivery is to the U.S. Air Force Medical Command at Fort Sam Houston, San Antonio, Texas, with the required delivery date set for July 23, 2026. The supplier, Philips North America LLC, must adhere to all DLA packaging and marking requirements under RP001 and ensure full compliance with government procurement specifications for medical equipment.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
DRAPE, WOUND CAREThe contract is for sterile disposable paper wound care drapes measuring 18 inches by 26 inches, supplied in packages of 300 units each. These drapes are designed to provide a sterile field during medical procedures and include an inner repellent layer to prevent moisture penetration. The product is identified by NSN 6515-01-568-3821, with a single package requested under purchase request 7017567293. Delivery is required within 20 days of award. The solicitation is issued under contract number SPE2DS-26-T-254M with a response deadline of July 27, 2026, and was posted on July 21, 2026. Performance is to be delivered to Dover AFB, ZIP 19902-7307. Bidders must specify the source and part number being offered. The contract incorporates technical and quality requirements from the DLA Master List, subject to specific revision controls based on acquisition type and amendment dates. It also includes DLA packaging standards, provisions for removal of government identification from non-accepted supplies, and potential applicability of covered defense information requirements. The contracting office is under the Department of Defense’s Medical Supply Chain MD Surg FSF, with Patrick Esposito listed as the primary point of contact.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTUREThe contract is for the procurement of Seirin J-type acupuncture needles, specification .30mm diameter by 30mm length, supplied in boxes of 100 needles each, with a total quantity of four boxes. The needles must meet specific packaging requirements mandated by the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must be sealed in unit containers that protect against damage or breakage, while exterior shipping containers must ensure safe delivery at the lowest carrier rate to the designated delivery point. The item is classified as a Type I (Code Q) shelf-life item with a strict 36-month non-extendable shelf life, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the solicitation. The needles are identified by NSN 6515-01-680-9021 and must be sourced as specified, with full vendor details including part number and source clearly provided in the bid. Packaging, marking, and compliance with DLA standards are mandatory, including the removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-255M, with a response deadline of July 27, 2026, and a required delivery within five days of award. The contract is managed by the Department of Defense’s Medical Supply Chain under the office of Patrick Esposito, with all documentation and standards accessible through official DLA portals.
Surgical and Medical Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details