Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CIRCUIT CARD ASSEMB

Active
SPE7M0-26-T-018DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a single circuit card assembly, identified by NSN 5998-01-721-8356 and drawing number 8873538 Rev C, with a required delivery time of five days ADO. The item is source-controlled and must be manufactured and tested in strict accordance with limited rights data that is not available from the government; only vendors with direct access to this data or traceability to approved sources may submit quotes, and a SAR package is mandatory for companies seeking source approval. The product must comply with CMMC Level 2 cybersecurity standards as verified by a certified third-party assessment organization, and it incorporates technical and quality requirements referenced in the DLA Master List, which governs revisions based on the solicitation or award date. Export control regulations apply to associated technical data under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program credential, have completed DLA-mandated export control training, and have received explicit approval from the DLA controlling authority. Packaging must meet DLA standards, and any non-accepted supplies must have all government identification removed prior to return. The solicitation, issued under SPE7M0-26-T-018D, closes on August 6, 2026, and is managed by the Department of Defense’s Maritime Supply Chain ESO BUYS office with primary point of contact Audrey Acuna.

General Info

Procure single circuit card assembly NSN 5998-01-721-8356, CMMC Level 2, ITAR/EAR controlled, DLA-approved only.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

334412 - Bare Printed Circuit Board ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-018D.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Audrey Acuna
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CIRCUIT CARD ASSEMB
CIRCUIT CARD ASSEMB
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) Drawing: 8873538 Rev C Cage: 53711
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE MANUFACTURED AND TESTED IN ACCORDANCE WITH THE CITED LIMITED RIGHTS DATA. THE GOVERNMENT CANNOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACEABILITY TO THE APPROVED SOURCES SHOULD QUOTE. SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS CONSIDERING SOURCE APPROVAL.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5998-01-721-8356 Quantity: 1 EA Purchase Request: 7017618435QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMBLYThe contract is for the procurement of one circuit card assembly identified by part numbers 33782-1 and 33782-2, with a corresponding NSN of 5998012401778, under solicitation SPE7M1-26-T-233D, issued by the Department of Defense through the Maritime Supply Chain. Delivery is required within ten days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards, with no special marking required. Packaging must be palletized according to DLA guidelines, using unit container E5 and packaging code U, and must be shipped by traceable means, excluding parcel post. The delivery address is designated as W35KUB at the Hangar 1 facility in Gulfport, Mississippi, and the shipment must be tracked under RDD code E and project code TP 2. The contract incorporates technical and quality requirements from the DLA Master List, and the solicitation response deadline is August 6, 2026, with a required delivery date of July 22, 2026. The unit of issue is each, with a fixed quantity of one unit and no variance allowed.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334412
New
DIBBS
Circuit Card Assembly ManufacturingThe contract seeks the manufacture of twenty units of a circuit card assembly identified by NSN 5998-01-694-4978, requiring full compliance with military quality and technical specifications. The work is classified as a subcontract under NAICS code 334412 and is being managed by the Active Devices Division within the Department of Defense. The solicitation was posted on July 24, 2026, with responses required by July 31, 2026, and no set-aside provisions have been designated. Performance location and contact details are unspecified, but the procurement is accessible through the DIBBS system using the provided link. All units must meet stringent military standards without exception.
ACTIVE DEVICES DIVISION

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 334412
New
DIBBS
PRINTED WIRING BOARThis contract solicits 41 units of a printed wiring board identified by NSN 5998-01-485-3318 under solicitation SPE7M1-26-Q-1294, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 147 days after order date, with both inspection and acceptance occurring at the destination. The item must comply with DLA packaging requirements per RP001 and be packaged in accordance with MIL-STD-2073-1E, using specific materials and methods outlined, including Unit Container D4, Intermediate Container E5, and packing code U. Marking must follow MIL-STD-129 with no special markings required. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lamps, sensors, or weapon systems specified by NAVSEA, and any such devices must include secondary containment and be shockproof per NAVSEA 5100-003D. The contractor must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and handle Covered Defense Information in accordance with RD002. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by solicitation or award dates. The item is subject to full and open competition, and all shipments must be delivered to the designated DLA Distribution facility in New Cumberland, Pennsylvania, as specified in the delivery and shipping addresses. The contract is issued under the Department of Defense with a NAICS code of 334412, and the point of contact is Ryan Snyder.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 13 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMBThe contract pertains to the procurement of 20 units of a circuit card assembly with NSN 5998-01-694-4978 under solicitation SPE7M5-26-Q-0757, with a response deadline of July 31, 2026, and a delivery requirement of 364 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicability determined by the solicitation or award date depending on acquisition size. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization. The item contains covered defense information subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location and requiring strict adherence to DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and explicit DLA authorization. Removal of government identification from non-accepted supplies is required, and packaging must meet DLA standards. The contracting office is the Department of Defense’s Active Devices Division, with primary point of contact Thomas Mitchell, and performance is under U.S. jurisdiction.
ACTIVE DEVICES DIVISION

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 334412
New
Federal
59--ELECTRONIC COMPONENThe U.S. Department of Defense, through DLA Mechanicsburg under solicitation number SPRMM126RGE26, is conducting a market survey to identify capable sources for the procurement of 100 units of the electronic component identified by NSN 5998-01-728-7495 and part number H409956-3, with the approved design originating from Raytheon Company (CAGE 7Y193). This action is explicitly a sources sought notice and not a formal solicitation, meaning no binding contract is being awarded at this stage; responses are requested to assess industry capability, commercial availability, and supply chain readiness. Respondents must provide complete traceability to the original equipment manufacturer, and non-manufacturers—including distributors and dealers—are required to submit verifiable documentation proving their authorized status or clearly identifying the OEM, its CAGE code, and part number. The component must comply with MIL-STD-130 Rev N for marking, and refurbished material is strictly prohibited. All offers must certify commerciality per FAR 2.101(b), including proof of commercial sale, pricing documentation, or catalog availability, and must attest to the capability to furnish certified cost or pricing data if the eventual contract exceeds $2.5 million. The government requires responses by June 13, 2026, via email to the designated contracting officer, and all submissions must reflect normal delivery timelines and confirmation of FOB origin as acceptable. Future awards, should a solicitation be issued, will follow a Lowest Price Technically Acceptable evaluation method under DFARS 215.101-2-70, require electronic submission of invoices and receiving reports via WAWF, and mandate use of the Electronic Document Access portal. Packaging must adhere to MIL-STD-2073, and acceptance will be at source with inspection conducted at the manufacturer’s facility. Contract administration will be governed by DLA’s procurement notices, including the Federal Acquisition Supply Chain Security Act prohibition and mandatory use of Workflow Pro for procurement assistance, with delivery and inspection requirements confirmed only upon formal solicitation issuance.
SPRMM1 DLA Mechanicsburg

POSTED

3 days ago

DEADLINE

in 28 days
View Details
NAICS: 334412
New
Federal
POWER METERThis contract solicits the manufacture and delivery of a POWER METER under solicitation number SPRMM126QGE76, with a response deadline of August 13, 2026. The item must conform to specified CAGE code and reference number 7ZXR5 N1913B-E23, and must be marked in accordance with MIL-STD-130 Rev N. All substitutions or changes to design, material, or part number require prior written approval from the NAVICP-MECH Contracting Officer, with specific code classifications outlining the nature of changes. The contractor is fully responsible for inspection and quality assurance, maintaining records for 365 days after final delivery, and ensuring compliance with all contractual requirements regardless of explicit inspection clauses. Packaging must adhere to MIL-STD-2073 and the contract schedule, with inspection and final acceptance to occur at designated locations. Electronic submission of invoices and receiving reports through PIEE-WAWF is mandatory, and vendors must register for the EDA tool to access orders and modifications. Offerors must be authorized distributors of the original equipment manufacturer and provide proof of authorization on official company letterhead. The solicitation enforces strict compliance with security and distribution control standards, including adherence to OPNAVINST 5510.1 for document handling, with seven defined distribution statement codes limiting information dissemination. Contractors must comply with DLA Procurement Note E06 for inspection at source and are required to maintain a 60-day quote validity. Changes to production facilities are prohibited without written approval, and any approved change must include a $250 administrative cost reduction. Pricing must be demonstrated as fair and reasonable through an informal cost breakdown without certification. Contract documents are considered issued upon electronic transmission, and vendors are strongly encouraged to register with NAVSUP WSS to receive automated notifications from NECO and PIEE-EDA. All submissions must include an email contact, and any deviations from solicitation requirements must be explicitly stated or risk disqualification.
SPRMM1 DLA Mechanicsburg

POSTED

3 days ago

DEADLINE

in 18 days
View Details
NAICS: 334412
New
Federal
INTERFACE,NETWORKThis contract pertains to the procurement of an INTERFACE,NETWORK item under solicitation SPRMM126QKG20, issued by the Defense Logistics Agency (DLA) Mechanicsburg with a response deadline of August 24, 2026. The requirement is governed by stringent quality, inspection, and compliance standards, including mandatory adherence to MIL-STD-130 Rev N for marking, mercury-free material specifications to prevent contamination in naval applications, and the use of approved CAGE code and part number references. Contractors must be authorized distributors of the original equipment manufacturer, and any substitution of parts requires prior written approval with detailed documentation and code classification. All submissions must be electronically processed through PIEE-WAWF for invoices and receiving reports, and compliance with CMMC Level 1 certification is required, alongside adherence to cybersecurity and export control protocols such as NOFORN and distribution statement classifications. The contract stipulates that deliveries must meet the Lowest Price Technically Acceptable evaluation criteria, and failure to comply with packaging, testing, or documentation requirements—including maintaining inspection records for one year post-delivery—may lead to rejection. Vendor registration for electronic data access through PIEE and notification systems via NAVSUP WSS is strongly advised to ensure timely receipt of contractual updates. The offeror must provide complete traceability of the product source, explicitly identifying the OEM and rejecting any refurbished or non-original components. Packaging and preservation must conform to MIL-STD-2073, and any production facility changes require formal written approval with a mandatory $250 cost reduction to offset administrative processing. Mercury contamination is strictly prohibited, and its incidental use as a functional component requires prior written authorization, mitigation plans, and warning labeling. All documentation referenced in the contract must be obtained from authorized sources, and distributors must submit proof of authorization from the OEM on official letterhead. The procurement excludes drawings and technical data, and all contractual obligations are binding upon submission of proposals via EDI or electronic means, with electronic submission mandatory for invoicing. Contractors are responsible for ensuring subcontractor compliance with all terms, and the government retains full rights to inspect and reject nonconforming deliverables at any point during or after production. Failure to register for EDA or neglecting to follow notification procedures may result in missed obligations or delays in contract issuance.
SPRMM1 DLA Mechanicsburg

POSTED

3 days ago

DEADLINE

in 29 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMBThis contract pertains to the manufacture and supply of a CIRCUIT CARD ASSEMB, governed by strict quality and inspection standards per MIL-I-45208 and ISO 9001, with mandatory adherence to higher-level inspection requirements. The contractor must ensure full compliance with specifications including MIL-STD-129 for labeling, MIL-STD-130 for marking, and stringent mercury-free criteria, prohibiting any metallic mercury or contamination in materials destined for submarine and surface ship use unless explicitly approved with detailed safeguards and warning labels. All changes to design, materials, or part numbers require prior written approval from the Contracting Officer and must be classified under specific code categories detailing the nature and impact of the modification. The contractor is responsible for maintaining a government-acceptable quality system and keeping inspection records for four years post-delivery, while also ensuring subcontractors meet identical requirements. The contract mandates electronic submission of invoices and receiving reports via WAWF and requires all vendors to register for the PIEE EDA portal to access orders and notifications. Offers must be submitted electronically via EDI with explicit notification of any deviations, or awards will be based solely on solicitation terms. The procurement is a small business set-aside, and only authorized distributors of the original equipment manufacturer may be considered, requiring formal proof of authorization. Delivery times and offer validity periods are unspecified, but responses are due by August 24, 2026, and awards will be made using the Lowest Price Technically Acceptable evaluation method. The place of performance and inspection locations are not yet defined, and all applicable documents must be obtained through official DOD sources, with special handling required for NOFORN and controlled technical data. Any change to production facilities must include a $250 administrative cost reduction and cannot affect small business performance, delivery schedules, or F.O.B. points.
SPRMM1 DLA Mechanicsburg

POSTED

3 days ago

DEADLINE

in 29 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMBThis contract pertains to the manufacture and supply of a CIRCUIT CARD ASSEMBLY for the AN/SPQ-9B RADAR SYSTEM, specified under solicitation N0010424QXA21, with a response deadline of August 28, 2026. The item is subject to stringent technical and quality requirements aligned with MIL-STD-130 for marking, MIL-STD-1686 for electrostatic discharge control, and IPC J-STD-001 Class 3 for soldering. The contractor must adhere to a quality assurance system compliant with MIL-I-45208 or ISO 9001/9002, and all inspections and records must be maintained for 365 days post-delivery. The contract mandates military standard packaging, traceability, and inspection and acceptance at origin with FOB terms; FAST Pay is not authorized. The Defense Contract Management Agency (DCMA) administers this contract, and only authorized distributors of the original manufacturer may submit offers, requiring proof of authorization. Any design, material, or part number changes must be submitted for written approval, categorized under specific change codes, and deviations or waivers must include detailed justifications demonstrating no adverse impact on form, fit, function, or quality. The item’s Cage Code is 21877 with reference number 6866821, and the quantity has been increased to 10 units. The solicitation is issued under simplified acquisition procedures, evaluating submissions based on price, past performance, and supplier performance risk. The NAICS code is 334412, and the contracting office is the Navy Supply Systems Command Weapon Systems Support in Mechanicsburg, PA, with specific requirements regarding the handling and distribution of technical documents under OPNAVINST 5510.1, including distribution statement codes and controls for NOFORN and official use only materials.
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 334412
New
Federal
PROCESSOR CARDThis contract solicitation, issued by the Department of Defense through DLA Mechanicsburg under solicitation number SPRMM126QHE26, seeks the manufacture and delivery of a PROCESSOR CARD under emergency acquisition flexibilities as defined by FAR Part 18. The requirement is evaluated using the Lowest Price Technically Acceptable (LPTA) method, with award contingent on compliance with all technical, quality, and administrative specifications. Key technical requirements include adherence to MIL-STD-130 Rev N for marking, use of the specified CAGE code 53711 and reference number 8240447-3, and strict control over design changes, which must be documented and approved in writing through defined code classifications. The contractor is responsible for all inspection, quality assurance, and recordkeeping activities, with documentation retained for 365 days post-delivery. Packaging and preservation must comply with MIL-STD-2073 as referenced in the contract schedule. All submissions must be made electronically via the Wide Area Workflow Payment System, with invoices and receiving reports submitted as a combined document. Vendors must provide their CAGE code, OEM information if not the manufacturer, and a point of contact for communications. The solicitation mandates authorization as an official distributor of the original manufacturer, requiring written proof submitted with the offer. Access to technical data and documents is governed by strict distribution statements and access protocols, with certain documents requiring formal requests through designated Navy offices. Contract performance is tied to the designated production facility and cannot be altered without written approval and a $250 administrative cost reduction. Contractors are encouraged to register for the Procurement Integrated Enterprise Environment and EDA to monitor order postings and receive automated notifications via NAVSUP WSS. The response deadline is September 22, 2026, and failure to comply with any stipulated requirement, including proper electronic submission and exceptions notification, may result in disqualification or cost deductions.
SPRMM1 DLA Mechanicsburg

POSTED

3 days ago

DEADLINE

in about 2 months
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMBThis contract pertains to the procurement of a CIRCUIT CARD ASSEMB, issued under solicitation N0010426QQC24 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The requirement mandates strict adherence to military specifications including MIL-STD-130 Rev N for marking, IPC J-STD-001 Class 3 for soldering, and ISO9001 for quality assurance. The contractor must be an authorized distributor of the original equipment manufacturer, with documentation confirming authorization required for award consideration. Delivery is FOB Origin, with accelerated delivery encouraged, and Government source inspection is mandatory. All items must meet contractual requirements without exception, and the contractor assumes full responsibility for inspection, quality control, and recordkeeping for 365 days post-delivery. Changes to design, material, or part number are strictly prohibited without prior written approval from the NAVICP-MECH Contracting Officer, and must be classified under one of six defined change codes. The contract includes compliance with federal mandates such as the Buy American Act, Defense FAR supplements, and the mandatory use of Workflow Pro (WFP) for payment and administrative processes. A Small Business Subcontracting Plan and Contractor Purchasing System Administration are required, along with adherence to security prohibitions and export control protocols under OPNAVINST 5510.1, particularly regarding Distribution Statement codes for classified or controlled technical data. Pricing must align with historical data, and bidders must submit invoices or justifications if pricing deviates. The contractor must provide the CAGE code of the manufacturer, the NSN or prior NSN for traceability, and proof of authorization if not the OEM. The contract is executed bilaterally, requiring formal acceptance by the contractor, and all documentation must be submitted via the designated point of contact, Amy S. Reynolds, prior to the response deadline of July 29, 2026.
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMBThis contract pertains to the manufacture and supply of a CIRCUIT CARD ASSEMB under a fixed-price, lowest price technically acceptable (LPTA) evaluation method, issued by the Department of Defense through DLA Mechanicsburg under emergency acquisition flexibilities. The work must comply with MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging, with inspection and acceptance occurring at the source as mandated by DLA Procurement Note E06. The contractor is required to be the original equipment manufacturer or an authorized distributor, and must provide proof of authorization if acting as a distributor. All items must adhere strictly to the specified CAGE code and reference number, and any design, material, or part number changes require explicit written approval from the NAVICP-MECH Contracting Officer, with specific change codes applied and administrative costs covered by a $250 price reduction in all cases. Records of all inspections must be maintained for 365 days after final delivery. Electronic submission of invoices and receiving reports through the Wide Area Workflow (WAWF) system is mandatory, and contractors must register for the Procurement Integrated Enterprise Environment (PIEE) Electronic Data Access (EDA) portal to access contract details. The solicitation requires full compliance with cybersecurity maturity model certification, small business representations, and security prohibitions outlined in recent deviations, and adherence to preference for U.S.-flag commercial vessels. Contractors must include their CAGE code, OEM information, and point of contact, and submit all exceptions to EDI submissions in writing. Distribution of technical documents is governed by seven distribution statement codes, with NOFORN and Official Use Only materials requiring formal certification. Offers must be submitted by the deadline of October 22, 2026, and are valid only if accompanied by all required representations, certifications, and documentation, with failure to comply resulting in disqualification.
SPRMM1 DLA Mechanicsburg

POSTED

3 days ago

DEADLINE

in 3 months
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 333912
New
DIBBS
SEAL ASSEMBLY, SHAFT, SPThis contract is for the procurement of a shaft seal assembly, spring loaded, identified by NSN 4320-01-584-1806, with a quantity of two units to be delivered within five days of order placement. The item is classified as a restricted source product, requiring exclusive engineering source approval from the government design control activity due to its critical application status, and may only be sourced from approved suppliers: Saint-Gobain Performance Plastics with part number 230112717 or Greene Tweed & Co Inc with part number MSE80K-300055. Ozone depleting chemicals are strictly prohibited in manufacturing or incorporation, and any substitute materials must be submitted for approval unless explicitly authorized by specification. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special marking codes applied. Palletization follows DLA guidelines, and the product is to be delivered FOB origin to the Spanish Air Force facility in Madrid, Spain, with the freight forwarder designated as DSPT00. The contract includes strict quality and technical requirements referenced from the DLA Master List, and any deviations or waivers require formal request and approval. The purchase request is 7017525600, with a firm fixed price of $2.00 per unit for a total of $4.00, and zero variance allowed in quantity. The required delivery date is July 21, 2026, and the contract is issued under solicitation SPE7M0-26-T-018T with a response deadline of August 6, 2026.
Air and Gas Compressor Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 313320
New
DIBBS
HOSE ASSEMBLY, NONMEThis contract is for the procurement of two nonmetallic hose assemblies identified by NSN 4720-01-185-3191, with a delivery requirement of five days after delivery order. The solicitation number is SPE7M0-26-T-019A, issued by the Department of Defense under the Maritime Supply Chain ESOC Buys office, with performance located in Huntsville, Alabama. Technical and quality requirements referenced in this document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging must comply with DLA standards, and all items must be physically marked in accordance with RQ017. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. Technical data associated with this item is subject to export control under either ITAR or EAR, and disclosure to foreign persons—regardless of location—is restricted. Access to this controlled data is limited to contractors with approved JCP certification, completion of required DOD training, and formal DLA authorization. Certification Level 2 under the Cybersecurity Maturity Model Certification framework must be maintained by any third-party assessment organization involved. Government identification must be removed from non-accepted supplies as per RQ011, and the entire procurement is subject to DFARS 252.225-7048 provisions for export-controlled technical data.
Fabric Coating Mills

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333912
New
DIBBS
VACUUM PUMP, ROTARYThe contract calls for the procurement of one rotary vacuum pump identified by NSN 4310-01-716-9147 and part number 026-50023-000 supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. Delivery is required within five days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, cushioning materials, and unit container types, with no special marking required. The item must be shipped via the fastest traceable means, explicitly prohibiting parcel post, to the Carrier Outfitting Matl Support Ctr in Suffolk, VA. Strict prohibitions forbid the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific authorized applications such as batteries, fluorescent lamps, and certain instruments, which must meet additional containment and safety standards per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The contract is issued under solicitation SPE7M0-26-T-019B with an original required delivery date of July 20, 2026, and points to Grace Beck as the primary point of contact for inquiries.
Air and Gas Compressor Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract is for the procurement of an electrical plug connector, identified by part number SP06E-8-3S and NSN 5935009129664, with a quantity of two units to be delivered within five days of order placement. Delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with stringent DLA packaging requirements, including MIL-STD-129 marking and labeling, and must be packaged according to ASTM D3951 if non-hazardous or FED-STD-313 if hazardous, with DLA’s Master List of Technical and Quality Requirements taking precedence over any referenced standards. The use of ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without written approval from the contracting officer, though this restriction does not apply to commercial items or part-numbered-only items. Freight must be shipped via the fastest traceable means, explicitly excluding parcel post, to the designated DLA distribution warehouse in Yermo, California, with a required delivery date of July 27, 2026. The solicitation, issued under contract number SPE7M0-26-T-018S, specifies a unit price of $2.00 per unit, totaling $4.00, and requires adherence to all applicable DLA technical, quality, and logistical directives, including palletization and packaging standards.
Electronic Connector Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
BUSHING, PIPEThe contract is for one unit of a bushing, pipe designated by NSN 4730-01-662-3153, supplied under solicitation SPE7M0-26-Q-1100 with a firm fixed price and zero tolerance for quantity variance. The product must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, specifically aligned with SAE AS4861 Revision NC dated 02/01/2026 and SAE AS4842 Revision B dated 03/01/2021, and the item is classified as a Performance Review Institute Qualified Manufacturer List or Qualified Products List item, requiring supply only from accredited manufacturers or assemblers listed on the EAuditsNet website. Packaging must adhere to MIL-STD-2073-1E with prescribed methods including preservative treatment, dry climate control, and specific wrapping and containment requirements, while marking follows MIL-STD-129 with no special labeling. Delivery is FOB destination within 30 days after award, with strict shipping instructions prohibiting parcel post and mandating traceable freight methods to the Fleet Readiness Center in Lemoore, California. The item is categorized under NAICS 332996 and is intended for U.S. Department of Defense use, with a required delivery date of June 23, 2026, and a solicitation response deadline of August 26, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336310
New
DIBBS
VALVE, SAFETY RELIEFThis contract specifies the procurement of four safety relief valves with part number 51226-1 and NSN 4820-01-642-7156 from EATON AEROSPACE LLC under solicitation SPE7M0-26-T-018R. The valves are designated as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other specification standards. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specifications. Delivery is required within five days of award, with items furnished FOB origin and inspected and accepted at destination. No quantity variance is permitted. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA Packaging Requirements, and unit of issue is each. Shipping must be via the fastest traceable means—parcel post is explicitly forbidden. The delivery address is the Fleet Readiness Center East in Cherry Point, North Carolina, and the required delivery date is July 6, 2026. The contract references specific DLA codes and identifiers, including the purchase request number and freight shipping details, and is subject to full compliance with DoD procurement protocols and unit of issue standards.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334515
New
DIBBS
RELAY, AIRCRAFT EQUIThis contract is for the procurement of two aircraft relays identified by NSN 5999-01-504-0257 and part number 101995-IE745.3 under solicitation SPE7M0-26-T-018J, with a total value of $4.00 at $2.00 per unit. The delivery must be completed within five days of order placement, with goods shipped FOB origin and inspected and accepted at the destination. Strict packaging requirements are mandated by the DLA Master List of Technical and Quality Requirements, which override commercial standards such as ASTM D3951; all items must be packed in accordance with MIL-STD-129 and RP001, with hazardous materials handled per TQ requirement IP025. Packaging must be properly marked and labeled, and palletization must comply with DLA standards. The delivery address is the Fleet Readiness Center West in Lemoore, California, with a prohibition on using parcel post—shipment must occur via the fastest traceable means. The required delivery date is July 23, 2026, and all technical, quality, and logistical conditions referenced in the DLA Master List are binding. Government-only fields and identifiers including DIC, ADV, and IPD are included for internal tracking purposes.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract is for a single electrical plug connector with NSN 5935-01-718-1211, issued under solicitation SPE7M0-26-T-018W by the Department of Defense’s Maritime Supply Chain ESOC Buys office. The item must be delivered within five days of award, and responses are due by August 6, 2026. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed prior to return. The item requires physical identification and bare item marking per specified guidelines. The technical data associated with this connector is subject to export control under ITAR or EAR, restricting disclosure to foreign persons, including foreign nationals within the United States, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DLA export control training and questionnaire. Additionally, the contractor must be certified to CMMC Level 2 by a C3PAO, and the contract is subject to controls governing covered defense information under RD002. The place of performance is Cherry Point, North Carolina, with Gerard Quinn as the primary point of contact.
Electronic Connector Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRING ASSEMBLY, COMThe contract pertains to the procurement of one Spring Assembly, Compensator with NSN 4320-00-558-0167 from Eaton Aerospace, LLC, under solicitation SPE7M0-26-Q-1102, issued by the Department of Defense. The item is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging and labeling must comply with MIL-STD-129 and DLA Packaging Requirements, with palletization adhering to RP001 specifications. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The contract enforces a Firm Fixed Price with no variance in quantity, and inspection and acceptance occur at the destination. The supplier must deliver within 30 days after award, shipping via the fastest traceable means, exclusively avoiding parcel post. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment. Delivery is FOB origin to the Fleet Readiness Center Southeast in Jacksonville, FL, with detailed shipping and government use identifiers provided for logistical coordination. The material need date is June 12, 2026, and the contract is aligned with NAICS code 332613 for industrial machinery manufacturing.
Spring Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
DIBBS
MOTOR, ALTERNATING CThe contract is for a single alternating current motor with part number MR1047 and NSN 6105-01-468-0532, sourced under solicitation SPE7M0-26-T-018U from the Department of Defense’s Maritime Supply Chain ESOC Buys. The item is required for delivery within five days of award, and responses must be submitted by August 6, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The manufacturer, identified by CAGE code 57368, must comply with all referenced specifications, and DLA does not provide a bidset. Compliance with mercury restrictions is mandatory: mercury or mercury-containing compounds must not be intentionally added to or come into direct contact with the hardware, except in specified functional components such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment barrier, as per NAVSEA 5100-003D. All supplies must also adhere to DLA packaging requirements and the rule mandating removal of government identification from non-accepted items. The point of contact for inquiries is Laurie Wassmuth, with contact details provided.
Motor and Generator Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333912
New
DIBBS
VACUUM PUMP, ROTARYThe contract is for the procurement of three rotary vacuum pumps with part number 93780 and NSN 4310017329135, issued by the Defense Logistics Agency under solicitation SPE7M0-26-T-018Q. Delivery is required within five days of award, with shipment to be made FOB origin and no variance allowed in quantity. The items must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129 with no special marking, and palletized per DLA Packaging Requirements RP001. Inspection and acceptance will occur at the destination, and the pumps must be shipped via the fastest traceable means, explicitly excluding parcel post. The delivery address is the Carrier Outfitting Material Support Center in Suffolk, Virginia, and the required delivery date is July 20, 2026. The contract is under the NAICS code 333912 and is managed by the Maritime Supply Chain ESOC Buys group within the Department of Defense, with Grace Beck listed as the primary point of contact.
Air and Gas Compressor Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
DIBBS
COVER, HYDRAULIC RESThe contract pertains to the procurement of one unit of a hydraulic reservoir cover, identified by NSN 4320-01-451-6424 and part number 6617042, supplied by JLG Industries, Inc. The delivery is required within five days of award, with shipment terms FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination, with packaging strictly following MIL-STD-2073-1E standards, including specific preservation methods, packaging materials, and unit container code E6. Marking must comply with MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is to be delivered to the military installation at Schokfield Barracks, Hawaii, under the specified government point of contact and shipping address, with the original required delivery date set for July 23, 2026. Technical and quality requirements are governed by the DLA Master List referenced in the document, applicable per the solicitation or award date depending on acquisition size. The contract number is SPE7M0-26-T-018K, with the solicitation issued by the Department of Defense’s Maritime Supply Chain eSoc Buys division, and the point of contact is Grace Beck.
Fluid Power Pump and Motor Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details