Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CIRCUIT CARD ASSEMB

Active
SPE7M1-26-T-193JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of three circuit card assemblies identified by part number 080193-0-51 and NSN 5998-01-279-7481, under solicitation SPE7M1-26-T-193J, issued as a total small business set-aside with a response deadline in July 2026 and delivery required within 168 days. The item is classified as a critical application and must meet all technical and quality standards referenced in the DLA Master List, including compliance with cybersecurity requirements at CMMC Level 2. Strict ESD and EMI protections are mandated under MIL-PRF-81705, requiring qualified barrier materials from approved manufacturers on QPL-81705, with Type I material used for both ESD and EMI protection and Type III wrap required if cushioning is not otherwise specified. All components must be safeguarded against physical damage to leads and terminals through approved packaging methods, with preservation and packaging conforming to MIL-STD-2073-1E and MIL-STD-129 for marking. The assembly must not contain intentionally added mercury or mercury compounds except as permitted under specific exceptions governed by NAVSEA, and must be handled and packaged at approved ESD/EMI protective workstations. The product is to be delivered FOB origin to the DLA distribution center in New Cumberland, Pennsylvania, with no variance allowed in quantity and inspection and acceptance occurring at destination. The supplier bears full responsibility for verifying compliance with all packaging, material, and procedural requirements outlined in this contract.

General Info

Procurement of three circuit card assemblies under federal solicitation with July 20, 2026 deadline.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334412 - Bare Printed Circuit Board ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE7M1-26-T-193J.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Ryan Snyder
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CIRCUIT CARD ASSEMB
ITEM NAME: CIRCUIT CARD ASSEMBLY
REFERENCE CONTROL NUMBER 080193-0-51
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
ZZ ADDITIONAL SPECIAL MARKING: 39 ESD sensitive electronic device requirements of MIL-STD-129 apply
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
SPE7M1-26-T-193J
SECTION B
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
WARD LEONARD CT LLC 63743 P/N 080193-0-51
ELECTRIC BOAT CORPORATION 96169 P/N 080193-0-51
ELECTRIC BOAT CORPORATION 96169 P/N 099015-0 ITEM 27
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017438189 0001 EA 3.000
NSN/MATERIAL:5998012797481
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:LT CUSH/DUNN THKNESS:B
UNIT CONT:E5 OPI:M
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
SPE7M1-26-T-193J
SECTION B
PR: 7017438189 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals. ZZ ADDITIONAL SPECIAL MARKING: 39 ESD sensitive electronic device requirements of MIL-STD-129 apply
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE7M1-26-T-193J
SECTION B
PR: 7017438189 PRLI: 0001 CONT’D
Need Ship Date:01/05/2027 Original Required Delivery Date:06/07/2027
SPE7M1-26-T-193J NSN/Part Number: 5998-01-279-7481 Quantity: 3 EA Purchase Request: 7017438189QTY: 3 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334412
New
DIBBS
Supply of Printed Circuit Board (MFR P/N 1741785 / NSN 5998015156765)The contract entails the supply and delivery of a single military-grade printed circuit board identified by manufacturer part number 1741785 and national stock number 5998015156765, specifically manufactured to meet stringent defense requirements for operational use aboard the USS ANCHORAGE (LPD 23). This is a subcontract under the broader procurement framework managed by the Defense Logistics Agency, a component of the Department of Defense, and falls under the NAICS code 334412, which classifies it within the electronic component manufacturing sector. The component must comply with all technical, quality, and reliability standards mandated for naval applications, with no flexibility permitted for deviations from the specified design or performance criteria. The solicitation was posted on July 20, 2026, and the contract is linked to the master award SPE7LX21D0087 with the delivery order SPE7LX26FB05F, indicating it is part of a larger logistical and supply chain operation. There is no set-aside designation or specific small business preference indicated, and no point of contact or physical location details are provided for performance, implying that delivery is directed to the naval vessel itself, with fulfillment managed through DLA’s centralized distribution system. The contract underscores the critical nature of maintaining mission-critical electronics on active naval platforms and requires adherence to defense-grade manufacturing protocols, including traceability, testing, and documentation integrity to ensure compatibility and durability in harsh maritime operational environments.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

N/A
View Details
NAICS: 334412
New
DIBBS
ELECTRICAL STANDARDThis contract, issued under solicitation SPE7M1-26-T-219R by the Department of Defense through the Maritime Supply Chain, requires the delivery of one unit of electrical equipment identified by NSN 6625013663837 with a specified delivery window of 20 days from the contract award. All supplies must comply with the DLA Master List of Technical and Quality Requirements referenced via R and I numbers, which take precedence over other standards such as ASTM D3951. The item may contain batteries and must be packaged according to RP001 for procurement, with detailed labeling and unit of issue protocols aligned to MIL-STD-129. Packaging must follow TQ requirement IP025 if the item is classified as hazardous under FED-STD-313; otherwise, commercial packaging per ASTM D3951 is acceptable. A complete Safety Data Sheet and OSHA-compliant hazard label must be provided at the time of quote if hazardous materials are present, and the offeror is responsible for self-identifying hazardous content per FED-STD-313 and FAR 52.223-3. The item must be delivered FOB origin with zero quantity variance, inspected and accepted at destination, and shipped using traceable freight methods—parcel post is prohibited. Delivery must reach the designated military supply facility at Twentynine Palms, California, and the contract specifies a required delivery date of March 6, 2026. All documentation and compliance must align with the DLA eProcurement system standards active on the solicitation issue date, with primary point of contact provided for procurement inquiries.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMBThis contract pertains to the supply of a circuit card assembly identified by NSN 5998-01-691-3156 and part number CAE044972, with a requirement for four units to be delivered within 168 days from the contract award, FOB origin. The item is classified as a critical application and electrostatic discharge sensitive device, necessitating strict compliance with DOD-mandated ESD and EMI protective packaging standards per MIL-PRF-81705. All packaging must utilize qualified barrier materials from manufacturers listed on QPL-81705, specifically Type I converted bag barrier material for both ESD and EMI protection, and Type III barrier wrap if ESD-approved cushioning is not otherwise specified. The supplier must employ an approved ESD control program per MIL-HDBK-263, operate an authorized ESD workstation as defined by MIL-HDBK-773, and ensure all personnel are trained in grounding and handling procedures to prevent damage from electrostatic or electromagnetic field forces. No deviations from these requirements are permitted. The item must be packaged and preserved in accordance with MIL-STD-2073-1E using preservation method GX, with physical and ESD protection applied to all leads, terminals, and protrusions to prevent breakage or bending. Marking must comply with MIL-STD-129, including the special marking code 39 to denote ESD sensitivity, and palletization must meet DLA Packaging Requirements. Mercury and mercury-containing compounds are strictly prohibited unless used in specified functional components such as batteries, sensors, or weapon systems, and any portable devices containing mercury must include a secondary containment barrier per NAVSEA 5100-003D. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, and the supplier is responsible for verifying ongoing compliance with all specifications, including material sourcing and environmental controls throughout the supply chain.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334412
New
Federal
ELECTRONIC COMPONENT FOR THE AEWS AN/FPS-117 5998011765358QXThis solicitation seeks a single electronic component identified by NSN 5998-01-176-5358 QX for use in the AEWS AN/FPS-117 system, with additional line items for a production article and other related elements, though only the base item carries a specific quantity. The offeror must comply with rigorous military packaging standards including MIL-STD-2073-1E and MIL-STD-130 for item marking, which requires the NSN, Configuration Item Identifier, serial number, and military type designation to be clearly affixed. Shipping and storage must conform to MIL-STD-129 R with Code 39 barcoding on all containers, and serviceable condition must be labeled using DD Form 1574 or 1574-1, avoiding green or red coloring. Supply chain traceability must be maintained for ten years after final payment, and counterfeit prevention must follow SAE AS5553 standards, while an IUID marking plan must align with DI-MGMT-81803. The component must be manufactured using ESA-approved engineering data packages, including specific drawings from CAGE 03538, with Safety Data Sheets submitted per FED-STD-313. All offers are subject to mandatory pre-contract qualification requirements, including submission of a self-funded qualification article for form, fit, and function evaluation and a complete test report for government review prior to award. Price is the primary evaluation factor, with non-price factors considered significantly less important; however, failure to meet eligibility, qualification, or test reporting milestones renders an offeror ineligible. The contractor must use WAWF for all payment requests, adhere to DFARS requirements for electronic submissions, and maintain current SAM registrations with accurate representations and certifications. Cybersecurity compliance demands CMMC status appropriate to the handling of Controlled Unclassified Information and adherence to NIST SP 800-171, while Buy American Act and Trafficking in Persons provisions apply. Delivery must occur FOB Destination within the specified schedule, with pricing held firm for 120 days; offers proposing earlier delivery may be favored. The contract includes clauses for changes, inspections, taxes, assignment of claims, unenforceable obligations, accelerated payments to small businesses, and prohibitions on certain foreign-made unmanned aircraft systems and telecommunications equipment. The Government reserves the right to evaluate based on cost, past performance via SPRS, and compliance with all technical
Ut DLA Aviation At Ogden

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334412
New
Federal
MODULE - CONTINUITYThis contract pertains to the manufacture of the MODULE - CONTINUITY, identified by part number 10592-502-1 and design cage 94756, under solicitation N0010426QAB67, with a response deadline of June 30, 2026. The work is governed by strict military standards, including MIL-STD-130 for mechanical parts, MIL-STD-1285 for electrical and electronic components, and MIL-STD-454 and MIL-P-15024/5 for electronic and electrical equipment, respectively. Configuration control must adhere to MIL-STD-973, requiring formal submission of engineering change proposals, deviations, and waivers to the Navy Inventory Control Point in Mechanicsburg, Pennsylvania. Quality assurance responsibilities rest entirely with the contractor, who must implement a comprehensive inspection system and maintain complete records for 365 days after final delivery. Government inspections are reserved and may occur at any time to ensure compliance. The item must be delivered within 90 days and shipped FOB destination under the specified packaging standard, MIL-STD-2073. The contract mandates compliance with cybersecurity maturity model requirements and falls under a total small business set-aside. A priority rating for national defense purposes applies, and strict security prohibitions are in effect under a February 2026 deviation. The contractor must follow Navy-specific payment instructions through Wide Area Workflow, with invoicing routed to navsupwawf.wss.ftc@us.navy.mil. Documentation referencing military and Department of Defense standards must be obtained through designated government channels, including NAVICP-MECH for nuclear and ordnance publications, and the DODSSP portal for specifications. Commercial brand name descriptions are permitted, but alternative proposals must include full technical documentation for government evaluation. All contractual documents are deemed issued upon electronic transmission, and the contractor is bound by annual representations and certifications under Deviation 2026-O0043. Point of contact is Jennifer Henry, reachable through official Navy email and phone, with performance and administrative responsibility centralized under the Department of Defense’s Naval Supply Systems Command in Mechanicsburg, PA.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 334412
New
DIBBS
Electronic Components Assembly (ESD-Sensitive)The contract involves the full assembly of ESD-sensitive electronic components with strict adherence to military packaging, labeling, and cybersecurity standards, ensuring the integrity and security of sensitive components throughout the manufacturing and handling process. All work must comply with applicable defense regulations and protocols, emphasizing protection against electrostatic discharge and cyber threats to maintain mission-critical readiness. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, limiting eligibility to small businesses as defined by the NAICS code 334412, which covers semiconductor and other electronic component manufacturing. The contract is issued by the Department of Defense through the Maritime Supply Chain office, with performance required at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. Responses are due by July 30, 2026, and the solicitation was posted on July 19, 2026. Contractors must be prepared to demonstrate full compliance with military-grade security and handling requirements, including documentation and controls that align with defense cybersecurity frameworks. This subcontract opportunity is accessible through the DIBBS platform and is intended to support critical defense supply chain needs with specialized small business capabilities.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334412
New
DIBBS
ELECTRONIC COMPONENThe contract is for the procurement of 25 units of electronic components identified by NSN 5998-01-682-8308 under solicitation SPE7M1-26-T-218L, with a total small business set-aside and a NAICS code of 334412. The delivery is due within 383 days after award, and responses are due by July 30, 2026. The contract incorporates mandatory technical and quality requirements from the DLA Master List, with compliance governed by the revision in effect on the solicitation issue date. It is subject to Cybersecurity Maturity Model Certification Level 2, requiring the vendor to be a certified third-party assessment organization. The item includes technical data subject to export controls under ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons anywhere, and mandates compliance with DFARS 252.225-7048. Access to this data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DLA export control training, and explicit authorization from DLA. Packaging must follow DLA specifications, configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. Measuring and test equipment used must meet established standards, and all activities are overseen by the Department of Defense’s Maritime Supply Chain with performance occurring in New Cumberland, Pennsylvania. Primary point of contact is Ryan Snyder for inquiries.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334412
New
DIBBS
PULL TABThe contract is for the supply of pull tabs, with the unit of issue being PG, where one PG equals 100 units, and a total quantity of 4 PG required. The delivery must be completed within 20 days from the contract award, with the product to be shipped FOB origin and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and containment standards, and all marking must adhere to MIL-STD-129 without special codes. Palletization follows DLA packaging requirements, and shipment must use traceable freight methods—parcel post is prohibited. The delivery address is in Tampa, Florida, and the government point of contact is Ryan Snyder. The material is identified by NSN 5998-01-047-3436, and the solicitation number is SPE7M1-26-T-217U, with a required delivery date of July 15, 2026. The contract imposes strict prohibitions on the intentional use of mercury or mercury-containing compounds in any hardware or supplies, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shock-proof design and secondary containment per NAVSEA 5100-003D. For printed circuit boards, MIL-PRF-31032 is the recommended replacement for obsolete standards MIL-PRF-55110 and MIL-P-50884, and contractors must ensure laminate materials meet or exceed the quality of the canceled MIL-S-13949. The contract references DLA’s Master List of Technical and Quality Requirements for incorporated specifications, with applicable revisions determined by acquisition size and solicitation amendment dates. Only approved part numbers from 3M Company, specifically P/N 3490-4 and P/N 7000057793, are recognized, and the solicitation is issued under the DoD’s authorized unit of issue system.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 334412
New
DIBBS
Circuit Card Assembly (CCA) Manufacturing and TestingA military-spec circuit card assembly with NSN 5998375312141 and P/N 90105100061-03A is being procured under a subcontract for full manufacturing and testing, encompassing component sourcing, printed circuit board fabrication, assembly, and rigorous functional verification. The work must adhere to stringent environmental and preservation standards required for defense-grade electronics, ensuring long-term reliability under operational conditions. Performance is designated for San Diego, California, with a response deadline of July 22, 2026, and the solicitation falls under NAICS code 334412 for electronic component manufacturing. The contracting entity is the Department of Defense via the Maritime Supply Chain, indicating this requirement supports naval or maritime defense systems.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 334412
New
DIBBS
Printed Circuit Board Supply for Defense SystemsOne Printed Circuit Board with NSN/Part Number 5998015877618 is being supplied and delivered to Letterkenny Army Depot, PA, under the basic contract SPE7LX-21-D-0007, ensuring full compliance with all technical and performance specifications required for defense systems. The delivery must be completed FOB Destination no later than July 24, 2026, with the item classified under NAICS code 334412, indicating its origin within the printed circuit board manufacturing sector. The transaction is structured as a subcontract coordinated through the Defense Logistics Agency, a component of the Department of Defense, with the award and fulfillment process managed through the DIBBS system under the delivery identifier SPE7L126FAU6F and contract count 77762. The contract was posted on July 17, 2026, and while no specific set-aside or solicitation number is provided, the requirement is clearly tied to sustaining critical defense infrastructure through precise component procurement.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 334412
New
DIBBS
Supply of NVIDIA Circuit Card Assembly (CCA) MCX653106A-ECAT/ECAT-SPThe contract entails the procurement and delivery of three units of a commercial off-the-shelf circuit card assembly, specifically the NVIDIA MCX653106A-ECAT/ECAT-SP, identified by NSN 5998-01-714-9632, for integration into defense telecommunications systems. Each unit must adhere to stringent military specifications including compliant packaging standards and strict country-of-origin requirements to ensure alignment with federal defense regulations. Full supply chain traceability is mandatory, requiring documented provenance from raw materials through final assembly to verify authenticity and prevent counterfeiting or unauthorized components. The items are to be delivered to the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and the solicitation falls under NAICS code 334412, categorizing it within electronic component manufacturing. The offer response deadline is set for July 22, 2026, with the solicitation posted on July 17, 2026, under the active oversight of the Department of Defense's Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 334412
New
DIBBS
Circuit Card Assembly ManufacturingThe contract calls for the manufacture and delivery of a single circuit card assembly identified by NSN 5998016672765, adhering strictly to the technical and quality standards established by the Defense Logistics Agency and meeting all applicable military packaging and marking requirements. The work must be completed as a subcontract under the NAICS code 334412, which pertains to the manufacturing of electronic components and boards, and is issued by the Maritime Supply Chain under the Department of Defense. Performance location is designated as FPO with a zip code of 34093, indicating delivery to a military postal facility, likely for overseas or shipboard use. The solicitation was posted on July 17, 2026, with a response deadline of July 22, 2026, allowing manufacturers only five business days to submit proposals. Although the solicitation number is not listed in the data, the official interface for submissions and details is accessible via the DIBBS platform. The type of set aside and point of contact are not specified, and there is no indication of small business set-asides or specific size standards. Compliance with DLA’s rigorous military specifications for functionality, documentation, and physical handling is imperative, and failure to meet any requirement may result in rejection regardless of technical merit.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334511
New
DIBBS
Small Business Subcontracting & Accelerated PaymentsSmall businesses are invited to subcontract under a Department of Defense opportunity managed by the Maritime Supply Chain, with accelerated payment terms available under FAR 52.232-40 to improve cash flow and financial agility. The contract is categorized under NAICS code 334511 and requires seamless integration into the prime contractor’s WAWF invoicing and compliance systems to ensure efficient financial processing and regulatory alignment. Subcontractors must be prepared to meet all system requirements for electronic submission and documentation to qualify for accelerated payments. The solicitation is open with a narrow response window, closing just three days after posting, and no set-aside designation is specified, meaning eligibility is based on the ability to perform under the stated terms rather than size or status-based preferences. Interested parties should act swiftly and ensure full technical and administrative readiness to interface with the prime’s automated systems.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 483111
New
DIBBS
Ocean Freight & U.S.-Flag Vessel TransportationThe contract requires the provision of ocean freight services using U.S.-flag vessels in full compliance with the Jones Act, ensuring that all transportation of supplies adheres to federal regulations governing maritime commerce. When U.S.-flag vessels are unavailable to meet required schedules or capacity needs, the contractor must prepare and submit waiver requests to secure authorization for alternative vessel arrangements. This subcontract is tied to the Department of Defense’s Maritime Supply Chain and is classified under NAICS code 483111, which pertains to deep sea, coastal, and Great Lakes water transportation. The opportunity was posted on July 20, 2026, with a strict response deadline of July 23, 2026, indicating a rapid procurement timeline. Performance of the contract may occur across unspecified locations, as no specific place of performance is designated, but the focus is clearly on ensuring reliable and compliant maritime logistics support for defense-related supply needs.
Deep Sea Freight Transportation

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract requires the identification, documentation, and proper labeling of hazardous materials in strict accordance with OSHA’s Hazard Communication Standard and Department of Defense regulations. Contractors must ensure all hazardous substances are accurately cataloged, clearly labeled with required hazard warnings, and accompanied by comprehensive safety data documentation to meet federal compliance standards. Work must be performed to support the Maritime Supply Chain under the Department of Defense, with a focus on maintaining operational safety and regulatory alignment across all handling and storage environments. The solicitation is structured as a subcontract with a narrow response window, closing just three days after posting on July 23, 2026, indicating an urgent need for qualified providers. The North American Industry Classification System code 541620 points to specialized environmental and scientific consulting services, emphasizing the technical expertise required for accurate hazardous material management. Performance is expected to support DoD logistics infrastructure, though specific geographic location details are not provided, suggesting the work may span multiple sites under the Maritime Supply Chain’s jurisdiction.
Environmental Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity & Covered Defense Information SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 controls to safeguard covered defense information and ensure compliance with DFARS cyber incident reporting requirements. It is structured as a subcontract under the Department of Defense, specifically managed by the Maritime Supply Chain agency, and falls under NAICS code 541512 for computer systems design services. The primary focus is on establishing a robust cybersecurity framework that aligns with federal standards to protect sensitive defense data and respond promptly to any cyber incidents as mandated by regulation. The solicitation is open for a very limited window, with responses due by July 23, 2026, and posted on July 20, 2026, indicating a tight turnaround for interested parties. The place of performance and point of contact details are not specified, suggesting flexibility in execution locations, but the requirement to adhere to NIST and DFARS standards is absolute. Compliance with these controls is not optional; failure to implement or maintain them could result in contract breach, loss of eligibility, or reporting obligations. Contractors must demonstrate proven experience in securing controlled unclassified information and maintaining continuous compliance throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334511
New
DIBBS
Electromechanical Toggle Switch SupplyThe contract calls for the supply of a Defense Department-compliant electromechanical toggle switch identified by NSN 5930005221425, requiring strict adherence to all military specifications for inspection, packaging, and hazardous material handling. The product must meet rigorous DoD standards to ensure reliability, safety, and compatibility with existing military systems, with no deviations permitted in manufacturing, testing, or documentation. All units must be fully traceable and prepared for immediate deployment in operational environments governed by federal defense protocols. The solicitation is posted as a subcontract under NAICS code 334511 and is managed by the Department of Defense through the Maritime Supply Chain organization. Interested parties must respond by July 23, 2026, at 5:00 PM, with no flexibility in deadline adherence. The contracting activity is conducted entirely through the DIBBS platform, and bidders are expected to comply with all procurement guidelines tied to federal subcontracting under defense contracts. While specific delivery locations and point of contact details are not provided, performance is expected to align with overarching DoD logistics and supply chain requirements.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541330
New
DIBBS
Technical Documentation and Reverse Engineering SupportThe contract seeks the development of comprehensive technical data packages for defense-related systems, including manufacturing drawings, process sheets, and shock test reports compliant with MIL-S-901 and DI-ENVR-80706 standards. The scope includes potential reverse engineering analysis to support documentation and manufacturing readiness, ensuring accurate reproduction or modification of existing components. All deliverables must meet stringent military specifications and be tailored for production use within defense supply chains. This is a small business set-aside subcontract under NAICS code 541330, administered by the Department of Defense through its Maritime Supply Chain division. The opportunity was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a rapidly timed procurement cycle. The work is expected to support critical defense infrastructure, requiring precise technical execution and adherence to government standards, though the specific place of performance and point of contact are not provided in the available data.
Engineering Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 488999
New
DIBBS
Hazardous and Radioactive Material Handling & TransportationThe contract is for the safe handling, labeling, and transportation of hazardous and radioactive materials, requiring strict adherence to Department of Transportation, Occupational Safety and Health Administration, and military standards. It includes responsibilities for FOB coordination and thorough vetting of carriers to ensure compliance and operational integrity throughout the supply chain. All activities must meet or exceed regulatory requirements for security, documentation, and employee safety, particularly when transporting sensitive or dangerous goods within defense-related operations. This is a total small business set-aside subcontract under the NAICS code 488999, issued by the Maritime Supply Chain division of the Department of Defense. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a compressed timeline for qualified small businesses to submit proposals. Performance location details are unspecified, suggesting flexibility based on operational needs, but all work must align with federal, military, and industry-specific protocols for hazardous material management. Participation is limited to small business concerns as defined under SBA regulations.
All Other Support Activities for Transportation

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
Supply of Filter Elements for Engine Fuel Pumps (NSN: 4330004718599)The contract is a total small business set-aside under the SBA program for the supply of filter elements with NSN 4330004718599, which must comply with military specifications for use in engine fuel pumps. Delivery is structured under future delivery orders to be issued by the Department of Defense through the Maritime Supply Chain, with shipments made FOB origin meaning the buyer assumes responsibility once goods leave the supplier’s facility. The item is classified under NAICS code 332996, indicating it involves other fabricated metal product manufacturing, and the solicitation is exclusively reserved for small businesses as defined by the Small Business Administration. The deadline to respond is set for July 23, 2026, with the solicitation posted on July 20, 2026, through the DIBBS platform, indicating the procurement is being managed under a subcontracting framework to support defense logistics requirements.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 322220
New
DIBBS
Packaging and Preservation of Sensitive/Military-Grade MaterialsThis contract requires the packaging and preservation of sensitive and military-grade materials in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring secure, standardized handling for defense applications. All items, particularly mercury-containing devices, must be enclosed in shockproof packaging to prevent damage during transport and storage, and must be properly marked with accurate barcoding systems as mandated by federal military specifications. The work must be performed by a small business as this is a Total Small Business Set-Aside under SBA guidelines, with the NAICS code 322220 indicating the primary industrial classification applies to paperboard container manufacturing. The solicitation is closed to responses after July 23, 2026, and the award will be managed under the Maritime Supply Chain division of the Department of Defense, with performance expected to support defense logistics requirements across unspecified locations.
Paper Bag and Coated and Treated Paper Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract entails the preparation, submission, and ongoing management of Safety Data Sheets for hazardous materials in full alignment with OSHA’s 29 CFR 1910.1200 regulations, ensuring all documentation meets federal safety and compliance standards. This includes continuous monitoring and implementation of regulatory updates, with responsibilities extending to the accurate flow-down of updated SDS requirements to all subcontractors involved in the supply chain. The work is structured to maintain consistent compliance across all tiers of operations, emphasizing timely communication and documentation integrity. This is a small business set-aside subcontract under NAICS code 541620, issued by the Department of Defense through the Maritime Supply Chain office, with a competitive bid window closing on July 23, 2026. The solicitation is open exclusively to certified small businesses, reflecting a federal commitment to fostering small business participation in critical safety compliance services. All activities are expected to be performed in support of defense-related logistics, requiring rigorous adherence to federal hazardous materials handling standards and proactive responsiveness to evolving regulatory requirements.
Environmental Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 483111
New
DIBBS
Transportation and Delivery Coordination via Sea FreightThe contract requires coordination of sea freight transportation to deliver valve seats to the USNS MT WHITNEY at FPO AE 09517-3310, with strict adherence to DLA procedures and a mandatory 5-day FOB destination delivery timeline. All logistics must be structured to meet military supply chain standards, ensuring timely and compliant movement of goods under the Department of Defense’s maritime supply chain oversight. The performance location is specified as a floating military postal address, indicating delivery to a vessel at sea or in a designated naval port, necessitating precise coordination with naval logistics teams. This is a subcontract under NAICS code 483111, which pertains to coastal and Great Lakes water transportation, and was posted on July 20, 2026, with responses due by July 31, 2026. The contracting activity falls under the Agency Name MARITIME SUPPLY CHAIN and the Department of Defense, requiring bidders to align with federal defense logistics protocols. The absence of solicitation number or point of contact suggests reliance on the DIBBS portal for detailed submission guidance and documentation, and all operations must be executed within the stringent timelines and regulatory framework governing military maritime deliveries.
Deep Sea Freight Transportation

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the provision of compliant packaging, labeling, and hazard communication documentation specifically for valve seats, ensuring full adherence to regulatory standards. This includes the preparation and delivery of Safety Data Sheets (SDS) and OSHA-compliant hazard labels that accurately convey chemical and physical risks associated with the product. The documentation must meet all federal requirements for workplace safety and transport regulations, with emphasis on clarity, accuracy, and alignment with current OSHA and GHS guidelines. This is a subcontract under the Department of Defense’s Maritime Supply Chain, with performance required at FPO, 09517-3310. The solicitation, identified by the NAICS code 541380 for other scientific and technical consulting services, was posted on July 20, 2026, and responses are due by July 31, 2026. All submitted materials must be thoroughly vetted for compliance before delivery, and failure to meet labeling or documentation standards could result in rejection or contract non-fulfillment. The work scope is strictly focused on hazard communication and packaging compliance, with no mention of manufacturing or supply of the valve seats themselves.
Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details