CIRCUIT CARD ASSEMB
Active
SPE7M1-26-T-204TFederalResponse Deadline
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Show more
The contract pertains to the procurement of circuit card assemblies under NSN 5998-01-664-1137, with four separate line items each for a single unit at a unit price of $1.00, totaling four units. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance. Inspection and acceptance occur at the final delivery point. All items must be prepared for delivery in strict compliance with MIL-STD-2073-1E packaging standards, marked according to MIL-STD-129, and palletized per DLA packaging requirements. Special handling is mandated due to electrostatic discharge sensitivity: any ESD-sensitive devices must be packaged using Method of Preservation GX with MIL-PRF-81705 barrier bags, and commercial packaging is prohibited. Non-sensitive assemblies must use Preservation Method 41. Contractors must maintain a certified ESD control program, operate an approved ESD workstation, use qualified packaging materials, and ensure all personnel are trained in ESD handling procedures per MIL-HDBK-263 and MIL-HDBK-773. Special marking code ZZ and code 39 must be applied when ESD sensitivity applies. All shipments must avoid parcel post and use traceable transportation via VSM for RDD 777 shipments to the vessel destination USS ESSEX LHD 2 at FPO AP 96643. No deviations or waivers to these technical requirements are permitted. The original delivery date is July 9, 2026, with the contract issued under solicitation SPE7M1-26-T-204T.
General Info
Four ESD-sensitive circuit card assemblies at $1.00 each, due July 9, 2026, per strict MIL-STD packaging and ESD handling requirements.
Agency
Department Of Defense → MARITIME SUPPLY CHAINView Agency
NAICS
334412 - Bare Printed Circuit Board ManufacturingView NAICS
Place of Performance
UNIT 100150 BOX 1, FPO, AP, 96643, USSet-Aside
NONE
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
PhaseSolicitation
Response Deadline
Organization & Contact Information
Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Office AddressUS
Contacts
Full Description
Show more
CIRCUIT CARD ASSEMB
CIRCUIT CARD ASSEMB
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Hewlett-Packard Company DBA HP 28480 P/N 727055-B21
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017443833 0001 EA 1.000
NSN/MATERIAL:5998016641137
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7M1-26-T-204T
SECTION B
PR: 7017443833 PRLI: 0001 CONT’D
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)>
HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO
ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD
(MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL
REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
SPE7M1-26-T-204T
SECTION B
PR: 7017443833 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
R21533
USS ESSEX LHD 2
UNIT 100150 BOX 1
FPO AP 96643
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21533
USS ESSEX LHD 2
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R215336181CC46
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: YNCC02 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/09/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017443829 0001 EA 1.000
NSN/MATERIAL:5998016641137
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7M1-26-T-204T
SECTION B
PR: 7017443829 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
SPE7M1-26-T-204T
SECTION B
PR: 7017443829 PRLI: 0001 CONT’D
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
SPE7M1-26-T-204T
SECTION B
PR: 7017443829 PRLI: 0001 CONT’D
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PARCEL POST ADDRESS:
R21533
USS ESSEX LHD 2
UNIT 100150 BOX 1
FPO AP 96643
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21533
USS ESSEX LHD 2
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE7M1-26-T-204T
SECTION B
PR: 7017443829 PRLI: 0001 CONT’D
M/F: (TCN) R215336181CC28
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: YNCC02 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/09/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017443837 0001 EA 1.000
NSN/MATERIAL:5998016641137
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
SPE7M1-26-T-204T
SECTION B
PR: 7017443837 PRLI: 0001 CONT’D
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
SPE7M1-26-T-204T
SECTION B
PR: 7017443837 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
SPE7M1-26-T-204T
SECTION B
PR: 7017443837 PRLI: 0001 CONT’D
MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
SPE7M1-26-T-204T
SECTION B
PR: 7017443837 PRLI: 0001 CONT’D
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PARCEL POST ADDRESS:
R21533
USS ESSEX LHD 2
UNIT 100150 BOX 1
FPO AP 96643
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21533
USS ESSEX LHD 2
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R215336181CC59
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: YNCC02 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/09/2026
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7017443828 0001 EA 1.000
NSN/MATERIAL:5998016641137
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PARCEL POST ADDRESS:
R21533
USS ESSEX LHD 2
UNIT 100150 BOX 1
FPO AP 96643
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21533
USS ESSEX LHD 2
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R215336181CC26
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: YNCC02 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/09/2026
SPE7M1-26-T-204T NSN/Part Number: 5998-01-664-1137 Quantity: 1 EA Purchase Request: 7017443828QTY: 1 Delivery: 20 days ADO
CIRCUIT CARD ASSEMB
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Hewlett-Packard Company DBA HP 28480 P/N 727055-B21
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017443833 0001 EA 1.000
NSN/MATERIAL:5998016641137
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7M1-26-T-204T
SECTION B
PR: 7017443833 PRLI: 0001 CONT’D
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)>
HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO
ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD
(MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL
REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
SPE7M1-26-T-204T
SECTION B
PR: 7017443833 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
R21533
USS ESSEX LHD 2
UNIT 100150 BOX 1
FPO AP 96643
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21533
USS ESSEX LHD 2
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R215336181CC46
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: YNCC02 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/09/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017443829 0001 EA 1.000
NSN/MATERIAL:5998016641137
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7M1-26-T-204T
SECTION B
PR: 7017443829 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
SPE7M1-26-T-204T
SECTION B
PR: 7017443829 PRLI: 0001 CONT’D
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
SPE7M1-26-T-204T
SECTION B
PR: 7017443829 PRLI: 0001 CONT’D
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PARCEL POST ADDRESS:
R21533
USS ESSEX LHD 2
UNIT 100150 BOX 1
FPO AP 96643
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21533
USS ESSEX LHD 2
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE7M1-26-T-204T
SECTION B
PR: 7017443829 PRLI: 0001 CONT’D
M/F: (TCN) R215336181CC28
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: YNCC02 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/09/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017443837 0001 EA 1.000
NSN/MATERIAL:5998016641137
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
SPE7M1-26-T-204T
SECTION B
PR: 7017443837 PRLI: 0001 CONT’D
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
SPE7M1-26-T-204T
SECTION B
PR: 7017443837 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
SPE7M1-26-T-204T
SECTION B
PR: 7017443837 PRLI: 0001 CONT’D
MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
SPE7M1-26-T-204T
SECTION B
PR: 7017443837 PRLI: 0001 CONT’D
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PARCEL POST ADDRESS:
R21533
USS ESSEX LHD 2
UNIT 100150 BOX 1
FPO AP 96643
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21533
USS ESSEX LHD 2
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R215336181CC59
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: YNCC02 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/09/2026
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7017443828 0001 EA 1.000
NSN/MATERIAL:5998016641137
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC
MICROCIRCUITS
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = MOP BASED ON ESD STATUS:
1. ALL ESD SENSITIVE DEVICES ARE REQUIRED TO BE
PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1, METHOD
OF PRESERVATION CODE "GX" NO WAIVERS OR DEVIATIONS
PERMITTED.
2. FOR NON-SENSITIVE CIRCUIT CARD ASSEMBLIES, METHOD
OF PRESERVATION CODE 41 APPLIES.
COMMERCIAL PACKAGING SHALL NOT BE UTILIZED.
PACKAGE DESIGN PERFORMANCE CRITERIA INCLUDES SAFE
DELIVERY OF CIRCUIT CARD ASSEMBLIES TO ULTIMATE USER.
ZZ SPECIAL MARKING REQUIREMENTS:
IF DEVICE IS CLASSIFIED AS ESD SENSITIVE, THEN
SPECIAL MARKING CODE 39 IS REQUIRED; USE ESD
PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING
PROCEDURES IN ACCORDANCE WITH MIL-STD-1686.
ATTENTION:
IF THIS DEVICE IS CLASSIFIED AS AN
ELECTROSTATIC/ELECTROMAGNETIC SENSITIVE DEVICE.
>>PRECAUTIONARY PACKAGING, HANDLING, AND
PROCESSING PROCEDURES SHALL BE USED TO PREVENT
DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND
OTHER ENVIRONMENTAL FIELD FORCES.<<(><<)>
--------------------------------------------
ALL ITEMS AND PACKAGES SHALL BE HANDLED<(>,<)>
PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION
-ORFIELD SERVICE KIT. FOR FURTHER INFORMATION<(>,<)>
CONSULT MIL-HDBK-773.
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING
FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE
AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED
SPE7M1-26-T-204T
SECTION B
PR: 7017443828 PRLI: 0001 CONT’D
SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".
REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1D, PARAGRAPH
5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING<(>,<)> HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging/ PackFAQs/ESDS/
IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961 SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC MICROCIRCUITS
PARCEL POST ADDRESS:
R21533
USS ESSEX LHD 2
UNIT 100150 BOX 1
FPO AP 96643
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R21533
USS ESSEX LHD 2
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R215336181CC26
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: YNCC02 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: NR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/09/2026
SPE7M1-26-T-204T NSN/Part Number: 5998-01-664-1137 Quantity: 1 EA Purchase Request: 7017443828QTY: 1 Delivery: 20 days ADO