This Solicitation opportunity from California was posted on June 17, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Citywide Generator Maintenance and Repair

Closed

RFQ191552State & Local

Submission Closed07/09/2024

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A5-27-T-0095

Solicitation SPE4A5-27-T-0095, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is for the procurement of three drive shaft assemblies, identified by NSN 6115009462753 and Honeywell International P/N 1537347-2. This is a Foreign Military Sales requirement for Taiwan, with delivery specified to the Parts-Attach General Depot Tainan Branch Warehouse. The required delivery date is October 8, 2026, with a delivery window of 20 days after order. Terms are FOB Origin, and both inspection and acceptance will occur at the point of origin. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with a zero-non-conformance acceptance standard for MIL-STD-105/ASQ Z1.4. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding covered defense information, and prohibitions on covered defense telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7L7-27-T-0615

Defense Logistics Agency

POSTED

DEADLINE

MOTOR, ALTERNATING CURR

Solicitation # SPE7M1-27-Q-0187

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-2534

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

61--MOTOR,ALTERNATING C, IN REPAIR/MODIFICATION OF

Solicitation # N0010427RZA15

This presolicitation notice from the Navsup Weapon Systems Support Mech involves the procurement of five alternating current motors, identified by NSN 7H-6105-008308048-E3, for delivery to DLA Distribution Barstow in California. Due to the government's lack of data rights and the impracticality of reverse engineering the parts, the agency intends to negotiate with a single source under FAR 6.302-1. The acquisition is categorized under NAICS code 335312 and is not being conducted as a commercial item procurement under FAR Part 12. Interested parties may submit proposals, quotations, or capability statements within 45 days of publication, or within 15 days if offering a commercial item alternative. The government maintains sole discretion in determining whether to proceed with a competitive procurement based on the responses received. This action may be subject to various Free Trade Agreements and the Buy American Act depending on the final solicitation clauses.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Stationary Tapered Keys

Solicitation # SPMYM327Q2006

The Portsmouth Naval Shipyard is soliciting quotes for 20 stationary tapered keys, which serve as replacement parts for 500KW motor generators. These items must be manufactured from AH36 high tensile steel per MIL-S-22698 and adhere to drawing DWG PS-24279-15. The procurement is being conducted as a commercial items solicitation under FAR part 12 with no set-aside, utilizing a Lowest Price Technically Acceptable (LPTA) evaluation method. Vendor responsibility will be determined using the Supplier Performance Risk System (SPRS) and FAR 9.104. A critical requirement for this award is an active CMMC Level 2 (Self) certification; quotes from contractors without this status will not be considered. Additionally, offerors must complete provision 252.204-7016 and provide CMMC unique identifiers issued by SPRS. The government requires destination inspection and acceptance, though origin inspection is an option that incurs a $2,500 evaluation price penalty. Deliveries must be made by December 13, 2026, and must comply with strict packaging and marking standards, including the use of the DLA Vendor Shipment Module for bar-coded labels. Payment terms are Net 30 days after acceptance, with options for payment via Government Commercial Purchase Card or Wide Area Workflow.

DLA Maritime - Portsmouth

POSTED

DEADLINE

61--MOTOR,ALTERNATING C

Solicitation # SPE7M1-27-T-2550

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPRMM127QKA42

This solicitation, issued by DLA Mechanicsburg, seeks the manufacture and delivery of one Controller ADACS (NIIN 016010694) for shipment to the USS LABOON DDG 58. The procurement will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria, with a 10 percent price evaluation preference applied for HUBZone small business concerns. The requirement specifies a higher-level contract quality requirement (MIL-I-45208/ISO 9001) and mandates that all items be physically identified per MIL-STD-130. Refurbished materials are strictly prohibited, and distributors must provide proof of authorization from the Original Equipment Manufacturer (OEM). Contractors are responsible for all inspection requirements at the point of origin, and records must be maintained for 365 days following final delivery. Packaging must adhere to MIL-STD-2073-1 for system stock and OCONUS shipments, while CONUS shipments follow ASTM D3951-18. All shipping containers must be marked per MIL-STD-129, and wood packaging must comply with ISPM 15. Administrative requirements include the mandatory use of Wide Area Workflow (WAWF) for invoicing and receiving reports, and offerors must provide CMMC unique identifiers for systems handling Federal contract information. Cybersecurity compliance is required per CMMC Level (Self) and DFARS 252.204-7012.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPE7M0-27-T-1133

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Industrial Trailer Mounted Multi-Voltage Generator Set(s) - 756_IEMU/ESU/CCU

Solicitation # 756ESU2026_002

The Commonwealth of Virginia Department of Corrections, Corrections Construction Unit, is soliciting bids under solicitation 756ESU2026_002 to establish a contract for the procurement and delivery of an Industrial Multi-Voltage Trailer Mounted Emergency Power Generator. The required equipment must be a new, standard manufacturer's proven model from the latest production year, delivered on an FOB destination basis. All awarded equipment must be delivered and invoiced no later than June 15, 2027. The agency requires notification 48 hours prior to delivery, and a manufacturer or dealer representative must perform a functional inspection and demonstration of all controls within 72 hours of delivery. Award will be based on the lowest responsive and responsible bidder who meets or exceeds the minimum technical specifications. Bidders must submit a completed Bid Form, a Supplier Diversity and Small Business Subcontracting Plan, and State Corporation Commission registration information, along with detailed technical data sheets and descriptive literature to substantiate product compliance. This solicitation provides award priority to DSBSD-certified micro or small businesses. The contract includes mandatory clauses regarding a drug-free workplace and the prohibition of forced or indentured child labor for contracts exceeding $10,000, and prohibits the assignment of the contract without written consent from the Commonwealth. Bids are due by December 1, 2026.

DOC - Architecture and Engineering

POSTED

DEADLINE

Fabricated Case Magnet AssemblyThis small business set-aside subcontract involves the primary fabrication and assembly of one FDAL-M65A fabricated case magnet for the Department of Defense, specifically supporting Army Contracting Command - Watervliet Arsenal projects. The contractor is responsible for producing a magnet case meeting a 4,900 lbs weight specification, utilizing Class H insulation and deep field aluminum strap wound coils. Technical requirements include the integration of electrical components for 230VDC with a 65A cold current and a 75% duty cycle. The final deliverable consists of one completed, tested, and marked magnet that adheres to MIL-STD-130 and MIL-STD-129 standards for IUID application. This project falls under NAICS code 335312 and is managed by the W6QK Acc Wva agency. Interested parties must adhere to the response deadline of November 23, 2026.

POSTED

DEADLINE

Replace DSN-HDD Generator for 78th Signal Battalion, Camp Zama, Japan.

Solicitation # FA520926Q0077

This solicitation is for a firm-fixed-price contract to decommission, remove, dispose of, and replace a 150kVA emergency power diesel generator at Building 121, Camp Zama, Japan. The contractor is responsible for providing all labor, materials, and equipment to install a new 150kVA/120kW diesel generator (208/120 VAC, 50 Hz) that is fully compatible with the existing Automatic Transfer Switch. The scope of work includes a mandatory 8-hour load test, commissioning, training, and the provision of a minimum 2-year warranty. While the existing stainless steel fuel tank will be reused, the contractor must inspect and certify all fuel piping as safe and leak-free. All work and hazardous material disposal must comply with Japanese environmental and noise regulations. Award will be granted to the responsible quoter with the lowest Total Evaluated Price who passes the technical acceptability evaluation. Due to the location of performance, the contractor must provide personnel with specific Japanese professional certifications, including Special Electric Officer and Chief Electrical Engineer licenses. Offerors not based in Japan must provide documentation of a partnership with a local authorized service provider to ensure on-site warranty and repair capabilities. The performance period is one calendar year from the date of award, with an expected award date around October 30, 2026. This procurement is subject to the Trade Agreements Act and requires compliance with MIL-STD-130 for item marking and the use of the Wide Area WorkFlow system for payments.

FA5209 374 Cons Pk

POSTED

1 day ago

DEADLINE

in 13 days

AI Contract Overview

The City of Palo Alto is seeking a qualified contractor to provide comprehensive maintenance and repair services for seventeen standby generator sets located throughout the city. The contract encompasses routine preventive maintenance, detailed in Part IV of the specifications, as well as the supply of necessary parts to ensure the generators operate reliably. The project aims to maintain the functionality of critical power systems across various city locations, ensuring continuous operations during outages or emergencies. The solicitation, titled "Citywide Generator Maintenance and Repair," was posted on June 17, 2024, with a response deadline of July 9, 2024. The contract is estimated to be valued between $50,000 and $150,000 and is managed by the Public Works-Engineering Division of California. Interested bidders can contact Nanette Obrien via email or phone for further details, and additional project information is accessible through the provided procurement portal link.

General Info

Agency

California → Public Works-Engineering Division

NAICS

335312 - Motor and Generator Manufacturing

Place of Performance

CA, USA

Set-Aside

NONE

Documents

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 17

Solicitation

Response DeadlineJul 9

Deadline has passed

Submission Closed

07/09/2024

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → Public Works-Engineering Division

Contacts1 person available

OfficeN/A

Organization / AgencyCalifornia → Public Works-Engineering Division

Office AddressN/A

Contacts

Nanette Obrien

contact@example.gov

+1 (555) 000-0000

Full Description

General work description: The successful bidder will provide maintenance and repair service for Seventeen (17) standby generator sets located throughout the City of Palo Alto, and supply parts as required. Detailed maintenance requirements will be outlined in Part IV (Preventive Maintenance) of this specification.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS