This Subcontract opportunity from Florida was posted on January 16, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Civil Engineering Design & Site Plans

Closed

State & Local

Submission Closed02/12/2025, 07:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336211

New

SLED

Steel Service Body Upfitting

Dawson County Board of Commissioners

POSTED

DEADLINE

IFB #504-26 Upfitted 1.5 Ton Medium Duty Truck

Solicitation # 504-26

The Dawson County Board of Commissioners is soliciting sealed bids for the purchase and upfitting of a 1.5 Ton Medium Duty Truck, specifically a 2027 Ford Super Duty Chassis Crew Cab or a 2026 Ram 5500 Tradesman. The scope of work includes the base vehicle and comprehensive upfitting, featuring a Kanpheide 700 series steel body, a 100-gallon aluminum fuel transfer tank with a 20 GPM pump, and specific amber and white safety lighting. Bids must be submitted in a sealed envelope to the Purchasing Manager in Dawsonville, Georgia, by the deadline of December 3, 2026. Award decisions will be based on the vendor's responsiveness and responsibility, with a focus on technical capability, past performance, financial resources, and compliance with the E-Verify program. Required documentation includes a contractor's affidavit, a non-collusion affidavit, a drug-free workplace affidavit, and a legal and character qualifications form. The selected vendor must maintain general liability insurance of at least $1,000,000 per incident and automobile insurance of $500,000, naming the Dawson County Board of Commissioners as additionally insured. Payment is issued on a NET/30 basis following the receipt of a correct invoice.

Dawson County Board of Commissioners

POSTED

DEADLINE

25--PANEL,BODY,VEHICULAR

Solicitation # SPE7LX-27-U-0555

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

MTC Cap-Style Module Fabrication

Department of National Defence

POSTED

DEADLINE

Mobile Treatment Center

Solicitation # W6369-25-A050/A

The Department of National Defence, supporting the Canadian Forces Health Services, is soliciting offers for the supply, delivery, installation, testing, commissioning, and warranty support of Mobile Treatment Centre (MTC) cap-style slide-in modules. These modules will be installed on government-owned 2024 Dodge RAM 3500 trucks to enhance casualty treatment, extraction, and transportation capabilities for training, routine operations, and domestic response across Canada. The requirement includes a firm order for two units, with an option to acquire up to eight additional units. The resulting contract will be effective from the date of award until March 31, 2028, with firm deliverables due by March 31, 2027. The MTCs must be designed to accommodate two patients and one medic simultaneously and must comply with Canadian Motor Vehicle Safety Standards (CMVSS) without exceeding the vehicle's Gross Vehicle Weight Rating. Selection will be based on the highest combined rating of technical merit and price, weighted at 60 percent and 40 percent respectively, with a minimum technical threshold of 25 points required for compliance. Delivery is specified as Delivered Duty Paid (DDP), Incoterms 2020, and the contract is subject to the Interim Policy on Reciprocal Procurement and anti-forced labour requirements.

Department of National Defence

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-4515

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Vehicle Cargo Hatch Cover FabricationThis subcontract involves the fabrication and delivery of one Vehicle Cargo Hatch Cover for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Opns Vehicle Spt. The project requires the production of the hatch cover to precise military specifications and technical data associated with NSN 2510012391659, utilizing specialized composite fabrication or precision metalworking equipment. The contractor must ensure full compliance with RP001 DLA Packaging Requirements for Procurement and all applicable technical data standards. Performance for this contract will take place in Texarkana, Texas, under NAICS code 336211. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Fabrication of Standoff, Skirting PlatesThis subcontract involves the precision machining and forming of 10 Standoff, Skirting Plates for the DLA Weapons Support Strategic Acquisition Program Directorate. The fabrication must strictly adhere to TDP Rev C Gen 3 and Basic Drawing NR 19207 12365240 to ensure all finished components meet exact drawing specifications. This opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 336211. To be eligible, contractors must maintain an ISO 9001:2015 quality system and hold JCP certification. Additionally, strict adherence to CMMC Level 2 and ITAR/EAR compliance is required. Interested parties must submit their responses by November 23, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-2431

Solicitation SPE7L3-27-T-2431, issued by the DLA Weapons Support Land Supplier Operations Vehicle Support, is for the procurement of 30 vehicular fenders (NSN 2510-01-075-4915). The contract requires a delivery timeline of 465 days after the order and utilizes the First Destination Transportation program. Key technical requirements include a Contractor First Article Test and Production Lot Testing. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001, and the use of additive manufacturing is prohibited unless specifically authorized. Due to the nature of the technical data, this contract is subject to ITAR and EAR export controls. Access to this data is restricted to contractors with an approved US/Canada Joint Certification Program certification who have completed required DLA export-control training. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with a military level of preservation. Inspection and acceptance will occur at the origin, requiring a Certificate of Quality Compliance. Administrative processes, including invoicing and payment requests, must be managed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

PARTS KIT, FIFTH WHEEL

Solicitation # SPE7L3-27-T-2426

This contract is a Request for Quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of 67 fifth wheel assembly parts kits (NSN 2510-01-479-0990). The requirement specifies a delivery timeline of 89 days after order, with the destination for inspection and acceptance located in New Cumberland, Pennsylvania. The procurement is conducted under the First Destination Transportation program with FOB Origin terms. Strict packaging and preservation standards are mandated per MIL-STD-2073-1 Appendix D, requiring each kit to be packaged individually with a detailed parts list and applicable assembly instructions. Bulk shipping of hardware is prohibited, and all items must be delivered in serviceable condition to avoid additional sorting by depot personnel. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act. Payment and receiving reports must be processed electronically via the Wide Area Workflow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

FLOOR, BODY, VEHICULAR

Solicitation # SPE7L3-27-T-2436

Solicitation SPE7L3-27-T-2436 is a Request for Quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of nine vehicular body floor kits, identified by NSN 2510-01-352-3798. The contract is a HUBZone set-aside with a delivery requirement of 165 days after award, with a need ship date of May 4, 2027, and a final delivery date of June 24, 2027. Delivery is FOB Destination, with the consignee located at DLA Distribution Red River in Texarkana, Texas. The procurement is subject to strict technical and security standards, including CMMC Level 2 certification and export control regulations under ITAR and EAR. Technical data access is limited to contractors with approved US/Canada Joint Certification Program certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with each kit packaged individually. Quality assurance requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-2446

Solicitation SPE7L3-27-T-2446 is a federal procurement issued by the Defense Logistics Agency (DLA) Weapons Support Land Supplier Operations Vehicle Support for the acquisition of one vehicle hatch door, specifically a cargo hatch cover under NSN 2510-01-239-1659. The required delivery date is December 2, 2027, with a delivery timeline of 377 days after receipt of order, shipped FOB Destination to DLA Distribution Red River in Texarkana, Texas. The procurement may be eligible for automated award, with a price evaluation preference for HUBZone small business concerns. This contract is subject to strict export control regulations under ITAR and EAR, requiring offerors to possess an approved US/Canada Joint Certification Program (JCP) certification and DLA approval to access technical data. Technical specifications include critical welding requirements per Drawing 12354728 and Drawing 12472301. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with a military level of preservation and specific marking requirements including arrow up and center of balance indicators. Inspection and acceptance will occur at the origin, requiring the contractor to provide a Certificate of Quality Compliance. Payment processing must be handled electronically via the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

This subcontract opportunity, titled Civil Engineering Design and Site Plans, involves the development of essential technical documentation for infrastructure or development projects. The scope of work includes the creation of civil engineering drawings, site plans, grading plans, drainage designs, and utility layouts, all of which must strictly comply with applicable local codes. The project is associated with Jacksonville, Florida, and was posted on January 16, 2025. Interested parties must submit their responses by the deadline of February 13, 2025. The contract is categorized under NAICS code 336211.

General Info

Agency

Florida → Jacksonville

NAICS

336211 - Motor Vehicle Body Manufacturing

Place of Performance

FL, USA

Set-Aside

NONE

Documents

This scope was carved out of 16397-25.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Engineering Design Services For Pecan Park Road Widening From I-95 To Main St.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJan 16

subcontract

Response DeadlineFeb 12

Deadline has passed

Submission Closed

02/12/2025, 07:00:00 PM EST

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyFlorida → Jacksonville

ContactsNo contacts available

OfficeN/A

Organization / AgencyFlorida → Jacksonville

Office AddressN/A

ContactsNo contact information available

Full Description

Development of civil engineering drawings, site plans, grading plans, drainage designs, and utility layouts for infrastructure or development projects in compliance with local codes.