This Government Contract opportunity from Government of Canada was posted on May 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Clamp Installation for Structural Stability

Closed

International

Submission Closed05/20/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332312

New

DIBBS

Steel Fabrication and Erection

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BAFFLE, FLUID COOLER, IN

Solicitation # SPE8E8-26-T-5028

The contract pertains to the procurement of 201 units of a baffle for a fluid cooler, identified by NSN 4420-01-612-5942 and part number PA12652373, supplied by Fairbanks Morse, LLC. Delivery is required within 167 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with MIL-STD-2073-1E, including specific preservation methods and materials, and marking must adhere to MIL-STD-129 with no special marking codes applied. Palletization follows DLA packaging requirements, and the final delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each, with a total contract value of $201.00 per unit, totaling $40,401. The procurement is governed by DLA technical and quality requirements referenced through the Master List, and the solicitation was issued under contract number SPE8E8-26-T-5028 with an original required delivery date of November 17, 2026, and a need ship date of February 1, 2027. The solicitation closed on August 17, 2026, and was posted on August 5, 2026, with the primary point of contact being Alexis Selby of the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE8E6-26-T-4035

The contract is for the procurement of 30 units of a shock absorbing ski with NSN/Part Number 0001S00000053, issued under solicitation SPE8E6-26-T-4035, which is a Total Small Business Set-Aside. The delivery schedule requires fulfillment within 407 days after contract award, and the response deadline for submissions is August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. The item includes technical data subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and requiring strict adherence to DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior approval from DLA. The place of performance is New Cumberland, Pennsylvania, with the contracting office under the Department of Defense’s DDSP New Cumberland Facility. The primary point of contact is Sophia Lim, reachable via email and phone provided.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-5050

POSTED

DEADLINE

MISSISSIPPI RIVER BASIN, LOCK AND DAM 21, QUINCY, IL, BOLTED TAINTER GATE FABRICATION

Solicitation # W912EK26Z1BZ6

The contract requires the fabrication, painting, and delivery of bolted Tainter gates to Lock and Dam 21 in Quincy, Illinois, with all work performed under strict adherence to AWS D1.1 welding standards and no fracture critical members permitted. Fabrication may occur outside the contractor’s shop or at a third-party location as long as enclosure specifications are met. Gates must be delivered by barge to the site, with final inspection and acceptance occurring upon arrival at the destination, governed by F.O.B. Destination terms. The contract is structured as a Firm Fixed Price with six optional increments beyond the base award, each extending the delivery timeline by 150 days, and delivery is prohibited from January 1 to March 30 with no weather-related time extensions allowed. All items must be uniquely identified using a machine-readable UII per MIL-STD-130 encoded per ISO/IEC 15434 and labeled on shipping containers in compliance with MIL-STD-129. Packaging and preservation requirements specify protective packaging for self-lubricated components, controlled storage for paints and coatings (non-exceeding 5 gallons, protected from temperature extremes), and environmentally controlled conditions for rubber and elastomeric materials to prevent degradation. Quality control is mandatory with a certified plan incorporating AISC Quality Certification and compliance with paint and welding specifications. The contractor must provide all commercial warranties and pass through subfabricator warranties. Submission of shop drawings, product data, samples, test reports, and field reports is required, and all testing must use calibrated equipment with results submitted within seven days. The offeror must comply with E-Verify and Form I-9 requirements, submit security documentation in sealed format, and adhere to OPSEC and antiterrorism protocols. Proposals must be submitted electronically by September 1, 2026, via email in PDF format, with large files uploaded through a secure portal. A pre-solicitation conference was held on June 30, 2026, and questions on draft documents were due by June 26, 2026. The contractor is responsible for all quality and compliance, with final acceptance authority held by the Government. All items must be reported in the Wide Area WorkFlow system, and the contract contains no monetary values or estimated value provided within the documentation.

POSTED

DEADLINE

Cannelton Lock and Dam - culvert valve assemblies

Solicitation # W912QR-61396929

Contractors holding MATOC Pool contracts W911WN23D0001 through W911WN23D0007 are invited to submit a price proposal for the removal, fabrication, and installation of two culvert valve assemblies at Cannelton Lock and Dam in Indiana. Each assembly includes a strut arm, bell crank, culvert valve, pins, valve bearing blocks, and ancillary components as detailed in the plans. Work scope encompasses unwatering and maintaining a dry environment within the culvert valve chamber during installation, followed by rewatering, and may include disposal of removed components in accordance with demolition and deconstruction specifications. The estimated project value falls between five and ten million dollars. Award will be made based on the lowest evaluated price, and proposals must remain open for acceptance for a minimum of 60 calendar days from the due date. All submissions must be made electronically via the Procurement Integrated Enterprise Environment Solicitation Module, and must be received by 11:00 AM EDT on Monday, September 7, 2026. Proposals not submitted through PIEE or received after the deadline will be rejected. Inquiries must be submitted exclusively through the ProjNet system using the provided bidder key, and no questions will be addressed during the mandatory site visit. All vendors must be registered in SAM.gov to access the solicitation documents, which are available only through that portal using solicitation number W912QR-61396929. This is a Small Business Set Aside, with the North American Industry Classification System code 332312, and the contracting office is located in Louisville, Kentucky.

W072 Endist Louisville

POSTED

DEADLINE

Gap Fencing - RAF Akrotiri

Solicitation # FA557026Q0022

The contract seeks a solution to close a gap in the fence along the flightline at RAF Akrotiri in Cyprus, with the aim of enhancing security and operational integrity at the site. The contractor has the flexibility to either ship the required materials directly to the provided U.S. military address in APO AE or transport the supplies independently into Cyprus and deliver them to RAF Akrotiri by their own means. The solicitation is identified by number FA557026Q0022, released on July 31, 2026, with proposals due by August 14, 2026. It falls under NAICS code 332312, which pertains to architectural and structural metal manufacturing, indicating the nature of the fencing components expected. There is no set-aside classification, meaning the opportunity is open to all qualified vendors. The requesting agency is the Department of Defense, specifically the FA5570 501 Csw Rco office, and the point of contact for inquiries is David T. Bartilson, reachable via email. The place of performance is clearly defined as RAF Akrotiri with its local postal code, ensuring clarity on where the work must be executed.

POSTED

DEADLINE

Smithland Locks and Dam Machinery House Cover - Supply

Solicitation # W912QR26QA074

W072 Endist Louisville

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract titled Structural Steel Fabrication and Erection is a subcontract under the Board of Regents of the University System of Georgia, specifically managed by Georgia, for the fabrication and on-site assembly of structural steel members. The solicitation was posted on August 4, 2026, with a response deadline of August 25, 2026, at 7:00 PM. The North American Industry Classification System code 332312 indicates the work falls under Structural Metal Fabrication, requiring specialized expertise in designing, cutting, shaping, and assembling steel components according to engineering specifications. The place of performance is not specified in the provided details, but the work will occur at a site under the jurisdiction of the Georgia university system. All submissions must be completed by the stated deadline, and the contract will be awarded based on compliance with technical, safety, and scheduling requirements typical of public infrastructure projects. The absence of a set-aside classification suggests the opportunity is open to all qualified subcontractors regardless of business size or owner characteristics.

Board Of(university System of Georgia) Regents

POSTED

DEADLINE

Duct and Pipe Support Fabrication and InstallationThe contract pertains to the fabrication and installation of structural supports for mechanical systems, specifically including trapeze pipe supports, duct supports, and stainless steel strut channel systems. These components are essential for securing and organizing piping and ductwork within building infrastructure, ensuring compliance with safety and operational standards. The work is being procured as a subcontract under the City of Independence in Missouri, with a NAICS code of 332312 indicating the focus on structural metal fabrication. The solicitation was posted on August 4, 2026, and responses are due by August 28, 2026, providing bidders with a four-week window to prepare and submit proposals. The scope of work requires technical expertise in designing, fabricating, and installing support systems that meet engineering specifications for durability, load capacity, and material compatibility, particularly with stainless steel components that resist corrosion in demanding environments. While details on location and point of contact are not specified, the place of performance is implied to be within the jurisdiction of the City of Independence, Missouri. Interested parties must respond by the deadline to be considered for award, and the nature of the contract suggests it is intended to support construction, renovation, or maintenance projects within municipal facilities.

POSTED

DEADLINE

Structural Steel Fabrication and Erection

POSTED

DEADLINE

Structural Steel Fabrication

DIRECTORATE OF SUBSISTENCE

POSTED

1 day ago

DEADLINE

in about 2 months

AI Contract Overview

The contract requires the supply and installation of 59 metal clamps designed to stabilize timber piles and prevent splitting, ensuring structural integrity in a marine or aquatic environment. The work includes precise site alignment and the secure attachment of clamps through bolting or welding as necessary, with all activities tailored to meet the structural demands of the installation location. The scope emphasizes precision and durability to withstand environmental stressors common in Canadian waters. This subcontract is issued by the Department of Fisheries and Oceans under the Government of Canada, with a planned performance location within Canada. The solicitation was posted on May 4, 2026, and responses must be submitted by May 20, 2026, by 7:00 PM. The North American Industry Classification System code 332312 indicates the work falls under fabricated metal product manufacturing, specifically related to structural metal fabrication. While detailed contact or address information is not provided, the contract is accessible through the Canada Buys platform for qualified bidders seeking to fulfill this specialized engineering requirement.

General Info

Supply and install 59 metal clamps to reinforce timber piles, enhancing structural integrity in Canada.

Agency

Government of Canada → Department of Fisheries and OceansView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 4

subcontract

Response DeadlineMay 20

Deadline has passed

Submission Closed

05/20/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Fisheries and Oceans

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of Fisheries and Oceans

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply and installation of 59 metal clamps to stabilize timber piles and prevent splitting, including site alignment and bolting or welding as needed.