This Solicitation opportunity from Department Of Defense was posted on April 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
CLOTH, PLAIN WEAVE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract involves the procurement of Plain Weave Cloth, NSN 8305-01-007-8305, compliant with Aerospace Material Specification AMS-C-9084, reaffirmed in 2013-07, intended for use in fabricating epoxy laminates for structural components, antenna housings, and fairings. The material must meet strict physical parameters including a width between 37.75 and 38.50 inches, thickness of 0.0065 to 0.0085 inches, and a nominal weight of 5.77 ounces per square yard with a minimum of 5.42 and maximum of 6.12 ounces per square yard. It is to be supplied in continuous rolls of 100 to 150 yards, with unit of issue as a yard, and must be naturally colored glass fiber fabric. All deliveries are subject to acceptance at destination, with the contractor bearing full responsibility for inspection, testing, and conformance to specifications. Certification of conformity is mandatory, supported by certified test data and compliance with DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements Revision 1 dated August 2021. Material sources must be identified and cannot be changed without written approval from the contracting officer. Packaging and marking must adhere to MIL-STD-129R with 2D Data Matrix barcodes at unit and pallet levels, while preservation and palletization follow DLA Packaging Requirements for Procurement and ASTM D3951, subject to precedence by the DLA Master List. Testing laboratories must be ISO 17025 accredited or undergo a DLA certification process and are subject to government witnessing of tests. The contract requires adherence to FAR and DFARS clauses related to cybersecurity, including NIST SP 800-171 compliance, cyber incident reporting within 72 hours, and prohibitions on the use of equipment or services from designated foreign entities such as Kaspersky, ByteDance, Huawei, and China-based suppliers. The contractor must maintain active SAM registration with accurate UEI and CAGE code 0U583, and report socioeconomic status, while avoiding prohibited business operations tied to sanctioned regimes. Payment is to be processed exclusively through WAWF using electronic funds transfer, with prompt payment terms, and delivery is required within 120 days of the order. All documents referenced in the contract take precedence over any
General Info
Agency
NAICS
Place of Performance
USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INDIVIDUAL NSN DATA . NSN 8305-01-007-8305; PGC90099 . ITEM NAME: ,,CLOTH,PLAIN WEAVE PART NUMBER: ,,AMS-C-9084 CAGE Code: ,,0U583; SAE INTERNATIONAL . Shall be in accordance with(IAW) Aerospace Material Specification AMS-C-9084, Cloth, Glass, Finished, For Resin Laminates, issued 199-06 and Reaffirmed 2013-07. . . . . Intended for use in fabricating resin laminates and plastic sandwich materials for structural parts, radio and radar antenna housings, fairings, and other applications. . Width: 37.75 inches minimum to 38.50 inchese maximum, inclusive of the selvages Weave type: Plain Thickness: 0.0065 inches minimum to 0.0085 inches maximum Special features: Used for epoxy laminates Weight: 5.77 ounces per square yard nominal; 5.42 ounces per square yard minimum to 6.12 ounces per square yard maximum Fiber material: Glass basic Color: Natural both sides Procurement Group Code (PGC): 90099 Type: IV Commercial Designation: 128 Class: 2 (For epoxy laminates) Roll Length: 100 yards minimum to 150 yards maximum . Unit of issue is a YARD (YD). . Certification: The test requirements for mechanical properties, electricial properties, or both mechanical and electrical properties of the laminates may be satisfied by the supplier's certificate of conformity to these requirements supported by certified test data showing that the cloth finished by the same supplier, of identical type, class, and finish, has previously been subjected to and has passed the applicable tests for laminate properties under this specification. . TEST REPORTS AND COMPONENT CERTIFICATIONS IN ACCORDANCE WITH Revision 1 of the DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS dated August 2021 ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS. . SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED<(>,<)> INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT
SPE1C1-26-Q-0235
SECTION B
SUPPLY/SERVICE: PGC: 90099 CONT'D
BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION TO THE CONTRACT.
RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION<(>,<)> EXAMINATION, AND TEST REQUIREMENTS SPECIFIED HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT. THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES CONFORM TO PRESCRIBED REQUIREMENTS. . . RT001: MEASURING AND TEST EQUIPMENT
. FED-STD-595C, COLORS USED IN GOVERNMENT PROCUREMENT, AND ALL ASSOCIATED SLASH SHEETS HAVE BEEN CANCELLED (FEBRUARY 14, 2017) AND SUPERSEDED BY SAE AMS-STD-595. ADDITIONAL INFORMATION FOR SAE AMS-STD-595: COPIES OF SAE AMS-STD-595 CAN BE OBTAINED FROM:
WEBSITE: STORE.SAE.ORG/EA/
TELEPHONE: 877-606-7323 (INSIDE USA AND CANADA) +1 724-776-4970 (OUTSIDE USA)
MAIL: SAE CUSTOMER SERVICE 400 COMMONWEALTH DRIVE WARRENDALE, PA 15096-0001
. . . LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS a. This solicitation/award consists of the following documents, exhibits, and other attachments b. DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements Revision 1 dated August 2021, which has superseded DLA Troop Support Clothing and Textiles Additional Quality Assurance Requirements dated October 2018. . 52.246-15 CERTIFICATE OF CONFORMANCE
. . Identification of Testing Sites. Unless the contract mandates a Government laboratory be used to conduct testing, the prime contractor shall identify all testing sites that will perform any test required by the terms of the contract, including end item testing.
Any laboratory proposed by the contractor is subject to the approval of the contracting officer. Testing facilities shall be subject to on-site witnessing of testing by the Government. The use of a laboratory previously approved by the Government is not a guarantee that testing will be performed properly, nor does it relieve a contractor from the contractual obligation to present conforming supplies accompanied by true, accurate, and valid test results.
Certification of Testing Sites. The prime contractor shall identify a technical point of contact for the testing site and provide current contact information. The prime contractor should alert the technical point of contact that the certification process has begun. A current ISO 17025 accreditation whose scope encompasses the contractual testing or equivalent will be accepted. When a testing site and its contact information are provided to DLA Contracting and the DLA Product Specialist, the product specialist will initiate a request for the DLA Product Test Center (DLA-PTC) to certify the lab. This request will be managed via an internal DLA Troop Support process.
In the absence of an appropriate ISO 17025 accreditation, the DLA-PTC will compare all required testing in the contract to the commercial lab capability. If the testing facility is new and/or unknown to the DLA-PTC, a lab certification survey (DLA Form 6005) will be
SPE1C1-26-Q-0235
SECTION B
SUPPLY/SERVICE: PGC: 90099 CONT'D
provided for submission.
If the DLA-PTC has a lab survey on file that is less than 3 years old, that survey will be used for the initial NSN/Part Number: 8305-01-007-8305 Quantity: 1 YD Purchase Request: 7015822375QTY: 1 Delivery: 120 days ADO
More opportunities from Department Of Defense → C AND T SUPPLY CHAIN
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS