Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

CNC Cutting System Setup and Virtual Operator Training

Open

Federal

Response Deadline11/12/2026, 05:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Orlando, FL, 32899, USA

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC27948544Q.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Portable CNC plasma and oxy-fuel cutting system

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 05:00:00 PM ESTin 2 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs physical installation, operational verification, and technical training for prime contractors on NASA Shared Services Center projects. Unpacks, assembles, and connects CNC units to plasma and gas equipment; provides virtual operator training and supports Government Acceptance Testing at KSC Building K6-1247. Requires KSC badging and safety compliance. Delivers a fully operational cutting system and trained operators.

Similar Contracts

Same NAICS industry code

PCR Instrument Installation and Performance Testing SpecialistThis subcontract opportunity is for a PCR Instrument Installation and Performance Testing Specialist to support prime contractors on projects for the Government of Ontario Ministry of Environment, Conservation and Parks. The selected provider will be responsible for the delivery, physical installation, calibration, and performance validation of PCR instruments to ensure they are fully operational and certified according to the specified statement of work. The contractor must maintain WSIB coverage and strictly adhere to all occupational health and safety regulations throughout the performance of the contract in Canada. Interested parties must submit their responses by November 26, 2026.

Environment, Conservation and Parks

POSTED

about 11 hours ago

DEADLINE

Preventative Maintenance and Repair for Stratasys J850 3D PrinterThis subcontract involves providing specialized preventative maintenance and repair services for the Stratasys J850 3D printer located at Aberdeen Proving Ground in support of Army Research Laboratory facility projects. The scope of work includes conducting service visits every 3,500 hours or annually, delivering phone-based technical support, and performing necessary software and firmware updates. To ensure equipment integrity, the contractor must utilize OEM-certified personnel and proprietary diagnostic tools, providing detailed electronic maintenance reports following each visit. Managed under the Department of Defense through W6QK Acc-Apg Adelphi, the opportunity falls under NAICS code 811210. Interested parties must adhere to the response deadline of November 17, 2026. This engagement is designed for a qualified provider capable of maintaining high-precision additive manufacturing equipment within a secure government facility.

W6QK Acc-Apg Adelphi

POSTED

about 13 hours ago

DEADLINE

Solenoid Valve Teardown and Repair ServicesThis subcontract involves providing specialized teardown, evaluation, and repair services for Solenoid Valves (NIIN 016038265) in support of NAVSUP Weapon Systems Support Mech projects for the Department of Defense. The scope of work includes disassembling valves to assess wear, performing repairs according to technical orders and drawings, and conducting testing to ensure compliance with OEM specifications. The contractor is responsible for applying physical identification in accordance with MIL-STD-130, REV N, and must support Government Source Inspection. Final deliverables include the repaired valves accompanied by the necessary test certificates. This opportunity falls under NAICS code 811210, with a response deadline of December 10, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Critical Component Repair ServicesThis subcontract for Critical Component Repair Services involves providing specialized repair and troubleshooting for aerospace projects under the 748th SCMG. The scope of work focuses on returning Critical Safety Items, Critical Application Items, and Hardness Critical Items to a serviceable state. To ensure quality and safety, the contractor must obtain ESA source approval and maintain strict compliance with AFMCI 23-113 and DFARS 246.202-4 standards. Managed by the Department of Defense under NAICS code 811210, the contract requires the delivery of certified serviceable components. The place of performance is located in zip code 73145. The solicitation was posted on November 10, 2026, with a response deadline set for January 1, 2028.

F3YCCF 448 Scmw

POSTED

about 13 hours ago

DEADLINE

in about 1 year

Specialized Sterilizer Maintenance and Technical SupportThis subcontract for Specialized Sterilizer Maintenance and Technical Support involves providing scheduled and unscheduled maintenance for Getinge Sterilizer equipment on Department of Veterans Affairs projects. The selected provider will be responsible for executing annual preventative maintenance and emergency repairs, ensuring all work is performed using authorized replacement parts and proprietary Getinge systems. To qualify, the contractor must maintain status as an authorized service provider for Getinge equipment. Key deliverables include the provision of fully operational sterilizer equipment and the submission of detailed maintenance logs. This opportunity is managed under NAICS code 811210 for the Department of Veterans Affairs Network Contract Office 12.

252-NETWORK Contract Office 12 (36C252)

POSTED

about 13 hours ago

DEADLINE

RIEGL VZ-1000 Specialized Repair and Calibration ServicesThis subcontract, issued by the Department of the Interior for the USGS Earthquake Science Center, requires specialized technical inspection, diagnosis, repair, and calibration services for a RIEGL VZ-1000 laser scanner. The selected provider must be an original equipment manufacturer or an OEM-authorized repair facility capable of performing precision adjustments and functional verification within a calibration laboratory that meets strict OEM standards. All work must be executed using approved procedures to ensure the device is fully operational upon delivery. The contractor is responsible for delivering the restored scanner along with a comprehensive final service report. This opportunity falls under NAICS code 811210 and was posted on November 10, 2026, with a response deadline of November 21, 2026.

Usgs Contracting Activity

POSTED

about 13 hours ago

DEADLINE

Intent to Sole Source: Preventative Maintenance services for Base 12-Month Period and Four (4) Optional 12-Month Periods for a Total of Five (5) for J850 3D Printer Manufactured by Stratasys, Inc.

Solicitation # W911QX-27-Q-A010

Solicitation W911QX-27-Q-A010 is a firm fixed price contract for preventative maintenance and occasional repair services for one Government-owned Stratasys J850 3D printer located at the Army Research Laboratory Polymer Additive Manufacturing facility at Aberdeen Proving Ground, Maryland. The contract structure consists of a base 12-month period followed by four optional 12-month periods, totaling a five-year period of performance. The scope of work includes providing technical support, software and firmware updates, required parts, and preventative maintenance kits, with mandatory service visits occurring every 12 months or 3,500 print hours, whichever comes first. The contractor is required to provide qualified personnel and tools to ensure proper operation and must deliver a detailed maintenance report within five business days following each site visit. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing, with payment terms set at NET 30 and 100 percent payment upon final government inspection and acceptance. All shipments must adhere to MIL-STD-130 and MIL-STD-129 standards for unique item identification and marking. The solicitation is categorized under NAICS code 811210 and incorporates various FAR and DFARS clauses regarding cybersecurity, human trafficking, and the Buy American program.

W6QK Acc-Apg Adelphi

POSTED

about 13 hours ago

DEADLINE

Annual Service Contract with 4 option years on a flow cytometer system

Solicitation # 124PSA27Q0012

Solicitation 124PSA27Q0012 is an unrestricted Request for Quotation issued by the USDA Agricultural Research Service for a firm-fixed price annual service contract to provide full-service coverage and maintenance for a FACSymphony A1 flow cytometer and associated units, including a FACS Flow Supply System and High Throughput Sampler. Located at the National Cold Water Marine Aquaculture Center in Kingston, Rhode Island, the contract consists of a one-year base period from November 11, 2026, to November 10, 2027, with four subsequent one-year option periods and a potential six-month extension. The scope of work requires the contractor to provide two preventive maintenance inspections and kits per year, unlimited service visits, and unlimited telephone support, covering all labor, travel, and parts excluding consumables. Award will be based on the lowest price technically acceptable criteria, evaluating the base period, all option years, and the potential extension. To be considered responsive, offerors must be registered in the System for Award Management and provide a detailed technical approach addressing the statement of work, past performance history, and resumes for BD-certified Field Service Engineers. All quotes must be submitted electronically to the designated procurement contact by November 10, 2026, at 4:00 PM CST. Payments will be processed through the Department of the Treasury Invoice Processing Platform.

USDA Ars Afm Apd

POSTED

about 13 hours ago

DEADLINE

PremiumCare service plan

Solicitation # 75N98027Q00075

National Institutes Of Health Olao

POSTED

about 13 hours ago

DEADLINE

J046--Base YR (03/01/2027-02/29/2028) + 4 OYs Deionized Water System Services

Solicitation # 36C25227Q0092

252-NETWORK Contract Office 12 (36C252)

POSTED

about 13 hours ago

DEADLINE

59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010425QDE08

Solicitation N00104-25-Q-DE08, issued by NAVSUP Weapon Systems Support, is a small business set-aside for the teardown, evaluation, repair, and modification of 70 Circuit Card Assemblies (NSN 5998-01-529-5211). The requirement is being solicited as a single-source procurement under FAR 6.302-1 because the government does not own the necessary technical data and has determined that purchasing the rights or reverse engineering the part is uneconomical. The contract specifies a required Repair Turnaround Time of 67 days and mandates Government Source Inspection. Technical requirements are governed by TDP Version 008, with physical identification and packaging adhering to MIL-STD-130 and MIL-STD-2073 respectively. The procurement process transitioned from Simplified Acquisition Procedures to Contracting by Negotiation under FAR Part 15. Award will be made to the responsible offeror determined to be most advantageous, with past performance weighted as more important than price. Evaluation of past performance may include DoD Supplier Performance Risk System ratings. Offerors must submit quotes including unit and total pricing and are required to use the Wide Area Workflow system for invoicing. The current offer due date has been extended to November 20, 2026. Delivery is designated as FOB Destination to W25G1U in New Cumberland, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Notice of Intent Pyxis Service Agreement

Solicitation # 36C24727Q0097

The Department of Veterans Affairs intends to establish a firm-fixed-price Pyxis Service Agreement for the Carl Vinson VA Medical Center in Dublin, Georgia. The scope of work involves providing comprehensive repairs and preventive maintenance inspections for all ES Pharmacy Pyxis units located throughout the hospital, as well as providing pharmacy access to the Knowledge Portal. The contract structure consists of a base period with two option years. The government intends to award this contract as a sole-source procurement to CareFusion Solutions LLC, as they are the exclusive manufacturer and provider of Pyxis products and services. This designation is critical because maintenance performed by any third-party vendor other than CareFusion's Field Service Technician Affiliates would render existing warranties null and void. While this is a Notice of Intent and not a formal request for competitive offers, interested parties capable of performing the work may submit a capabilities statement to Contracting Officer Earnest Ellison by November 19, 2026.

247-NETWORK Contract Office 7 (36C247)

POSTED

about 13 hours ago

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Specialized Lock Hardware and Components SupplyThis subcontract, managed by the NASA Shared Services Center, involves the procurement and delivery of specialized lock hardware for prime contractors working on facility projects at the NASA Stennis Space Center. The scope of work requires the supply of 210 new BEST brand SFIC brass padlocks, 210 7-pin K keyway uncombinated cores, and all necessary pinning components, including top and bottom pins, caps, and springs. All provided hardware must strictly adhere to BEST Small Format Interchangeable Core standards and be delivered to the B1111 Receiving Area. The opportunity is designated as a Total Small Business Set Aside under NAICS code 423710. Interested parties must adhere to the timeline established by the posting date of November 10, 2026, with a response deadline of November 18, 2026.

Hardware Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Rohde & Schwarz FSV3000 Signal and Spectrum Analyzers (or Equivalent)

Solicitation # 80NSSC27948682Q

The National Aeronautics and Space Administration, through the NASA Shared Services Center, is soliciting quotes for the purchase of three new Rohde and Schwarz FSV3000 Signal and Spectrum Analyzers or equivalent equipment. These units will support the sustainment and expansion of the DATR System Telemetry and RADAR Systems infrastructure at the Armstrong Flight Research Center in Edwards, California, providing real-time mission spectrum analyzation to Mission Control Centers. This is a firm-fixed-price procurement set aside for small businesses under NAICS code 334515. Award will be based on the lowest price technically acceptable offer, with technical acceptability determined by the ability to meet all solicitation requirements. The successful contractor must deliver the equipment within 13 weeks after receipt of order, FOB Destination, ensuring all units are fully operational and meet original equipment manufacturer performance specifications upon delivery. The contract includes a 12-month warranty and requires the submission of all manufacturer manuals and warranty documentation. Key administrative requirements include registration in the System for Award Management, compliance with U.S. export control laws such as ITAR and EAR, and adherence to specific packaging and marking standards for duty-free entry. Payment terms are set at NET 30. Quotes must be submitted to Tracy Bremer by November 11, 2026.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 13 hours ago

DEADLINE

Facility Modicon PLC Control hardware. Upgrading obsolete drops.

Solicitation # 80NSSC27949001Q

Analytical Laboratory Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

50 VASI Pressure Transducers

Solicitation # 80NSSC27948506Q

Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

LUMBER REPLENISHMENT FOR EGS

Solicitation # 80NSSC26948332Q

Solicitation 80NSSC26948332Q is a firm-fixed-price request for quotation issued by the NASA Shared Services Center for the replenishment of 168 pieces of Grade 1 Douglas-Fir lumber, measuring 2 inches by 12 inches by 16 feet. This procurement is set aside for small businesses under NAICS code 321912. The lumber must be dry, with a maximum moisture content of 19 percent, and must be straight and free of significant knots, twists, warps, or deformations. Yellow pine is explicitly prohibited. Technical requirements mandate that each piece of lumber be heat treated to IPPC ISPM 15 standards, requiring a minimum core temperature of 56 degrees Celsius for at least 30 consecutive minutes, and must be marked accordingly per American Lumber Standard Committee regulations. Delivery is FOB Destination to the Logistics Facility at the Kennedy Space Center in Florida, with receiving hours from 7:00 am to 2:30 pm. Award will be based on the lowest price technically acceptable offer. Quotes must be submitted via email to the designated point of contact by November 11, 2026, at 3:00 p.m. CT, and offerors must be registered in the System for Award Management.

Cut Stock, Resawing Lumber, and Planing

POSTED

about 13 hours ago

DEADLINE

in about 20 hours

4 Series Mixed Signal Oscilloscope

Solicitation # 80NSSC27941006Q-1

Analytical Laboratory Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # 80NSSC2794091Q

The National Aeronautics and Space Administration, through the NASA Shared Services Center, is soliciting quotes for a firm fixed price contract to procure and deliver padlocks and associated components for the Stennis Space Center in Mississippi. This procurement is a total small business set-aside under NAICS code 332510. The scope of work requires the delivery of 210 BEST SFIC brass padlocks and 210 uncombinated 7-pin K keyway satin chrome cores, along with various top and bottom pins. All materials must be provided in new condition and must be uniquely compatible with existing design parameters. Delivery is specified as FOB Destination to the B1111 Receiving Area, with an expected delivery timeline of two to four weeks after receipt of order. The contract will be awarded to the responsible offeror based on the lowest price technically acceptable (LPTA) criteria. Offerors must be registered in the System for Award Management (SAM) to be considered for the award. Quotes are due by November 18, 2026, and must include two points of contact. The solicitation incorporates several regulatory requirements, including personal identity verification of contractor personnel, compliance with U.S. export control laws such as ITAR and EAR, and specific packaging markings for foreign shipments. All contractual and technical inquiries must be submitted in writing to the primary point of contact, McKenzie Hanson.

Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

Precision Machining and Finishing of SpecimensThis small business set-aside subcontract through the NASA Shared Services Center involves the high-precision machining, grinding, and polishing of specimens for prime contractors on NASA procurement projects. The scope of work includes rough machining, low stress grinding of flat faces and edges using specialized fixturing, and longitudinal polishing. All deliverables must adhere to strict geometric and surface tolerances, specifically maintaining a maximum radius of 0.030 inches. The contract spans a 24-month performance period for the delivery of finished specimen batches. Due to the nature of the work, the provider must maintain full compliance with ITAR and EAR regulations. This opportunity falls under NAICS code 332710 and was posted on November 9, 2026, with a response deadline of November 13, 2026.

POSTED

DEADLINE

Innovation Research Forum MembershipThis subcontract provides prime contractors for the NASA Shared Services Center with a one-year membership in an open innovation research forum. The program is designed to facilitate the exchange of information regarding innovation processes and create interfaces between government, industry, and academia to apply research to practical, real-world challenges. A critical requirement of the contract is providing access to the specific research and professional network of the MIT Sloan School of Management. The primary deliverable is an active one-year subscription to the Innovation Lab, with performance based in Houston, Texas, under NAICS code 611310.

Colleges, Universities, and Professional Schools

POSTED

DEADLINE

Koike Oxy-Fuel Torch and Tip Supply

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Hypertherm Plasma Power Source and Consumables Supply

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Stainless Steel Mounting Bracket FabricationThis subcontract, managed by the NASA Shared Services Center, involves the fabrication of a custom stainless steel mounting bracket for projects at the NASA Langley Research Center in Hampton, Virginia. The primary objective is to produce a single bracket designed to interface an actuator with a valve, ensuring the final component strictly adheres to the weight footprint and face-to-face dimensions of the KTM/Bettis assembly. The procurement is categorized under NAICS code 332312 and was posted on November 9, 2026, with a response deadline of November 12, 2026. The resulting component will support prime contractors operating within the facility to maintain precise technical specifications for critical hardware integration.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS